led used for sale

Kronborg KM Mark 5 Fish gutting machine Condition: Overhauled in 2021 The Jutland Kronborg Fish Gutting Machine is designed for gutting fish such as cod, saithe, haddock, whiting and hake on board trawlers as well as in land-based factories. It is also suitable for river types of fish like a carp. The fish is placed continuously in the feeding chamber, there a conveyor belt with catches transports the fish through a positional system of guiding plates to the gutting chamber. The rotating knife cuts the fish as required. After having been cut, the fish passes a rotating nylon brush and water sprays which remove the last entrails. The gutted fish is led to the outlet end for further transportation. Due to the small size and weight, this machine can be used on vessels of the coastal fleet and shore plants. Capacity: 40 fish per minute Size range: 30-75 cm Power consumptio ...

turning length: 1500 mm turning diameter: 560 mm turning diameter over slide: 350 mm turning speeds: 25 - 1600 U/min swing diameter over bed slide: 350 mm turning dia. in gap: 785 mm quill travel: 180 mm spindle bore: 105,0 mm engine output: 7,5 kW spindle taper: DIN 55029 D 1-8 quill:: 5 MK weight of the machine ca.: 2.370 kg. range L-W-H: 2.840 x 1.150 x 1.460 mm Scope of delivery : - 3-axis digital display ES-12 V with LCD display - 3-jaw chuck PS3-315 mm / D8 - clamping disc 450 mm - Fixed bezel - passage diam. max. 180 mm - Live steady rest - passage diam. max. 120 mm - 2 center points - First filling with Shell Tellus 46 - Motor with magnetic brake according to CE standard - Foot pedal with brake function according to CE - coolant device - Quick change tool holder with 4 inserts - Protective device for quick-change tool holders - slip clutch - LED machine light - change gears - red ...

turning length: 2000 mm turning diameter: 560 mm turning diameter over slide: 350 mm turning speeds: 25 - 1500 U/min swing diameter over bed slide: 350 mm turning dia. in gap: 785 mm quill travel: 180 mm quill:: 5 MK spindle bore: 105 mm engine output: 7,5 kW spindle taper: DIN 55029 D 1-8 weight of the machine ca.: 2720 kg. Furnishing : - 3-axis digital display ES-12 V with LCD display - 3-jaw chuck PS3-315 mm / D8 - clamping disc 450 mm - Fixed bezel - passage diam. max. 180 mm - Live steady rest - passage diam. max. 120 mm - 2 center points - First filling with Shell Tellus 46 - Motor with magnetic brake according to CE standard - Foot pedal with brake function according to CE - coolant device - Quick change tool holder with 4 inserts - Protective device for quick-change tool holders - slip clutch - LED machine light - change gears - reducing sleeve - Thread clock - Chip back wall - o ...

bore capacity in steel (diameter): 32,0 mm arm length: 310 - 820 mm workpiece height max.: 370 - 870 mm turning speeds: 75 - 1220 U/min spindle taper MT: 4 MK base plate: 825 x 690 mm threading: 24 M quill stroke: 250 mm quill feed: 0,1/0,16/0,25 mm/U travel x / y: 500 / 510 mm total power requirement: 2,25 kW weight of the machine ca.: 1200 kg. range L-W-H: 1470 x 750 x 2100 mm Description : - Large-sized base plate - ideal for processing large workpieces - Thick-walled, polished column for increased sliding properties of the boom - Extension arm and drill head with independent hydraulic clamping - Simple height adjustment of the extension arm using a lifting motor - Ideal for drilling, countersinking, reaming and thread cutting - Hardened and ground gears, running in an oil bath - Good sliding of the drill head on the boom thanks to the ground surface scope of delivery : - Cube table - ...

devapo hotAir Midi 12 convection oven Devapo's HotAir convection ovens are specifically designed for food/ingredient heating and baking and bake-off products. This version is equipped with a highly functional and customer-friendly operation. Two operations (selection of the desired preparation time and temperature) achieve a guaranteed and consistent end product. HotAir grille included Optical hard film display with LED illumination On/Off/Open switch Stepless temperature adjustment switches End signal Advanced Airflow System Knob Tilt protection Special thermal insulation Robust certified construction technology Service-friendly control cabinet Removable ventilation plate Made entirely of stainless steel Self-ventilating door Electrical connection values 230 VAC Capacity single serving bowl 225 x 175 x 35 mm / 250 x 190 x 45 mm: 12 pieces Capacity portion trays 160  ...

Description: - Laser engraving LED - For burning ties bracelets - Turntable - Source Discharge - No divider - Loading SEKLER (palletizing)

devapo hotAir Midi 18 convection oven Devapo's HotAir convection ovens are specifically designed for food/ingredient heating and baking and bake-off products. This version is equipped with a highly functional and customer-friendly operation. Two operations (selection of the desired preparation time and temperature) achieve a guaranteed and consistent end product. HotAir grille included Optical hard film display with LED illumination On/Off/Open switch Stepless temperature adjustment switches End signal Advanced Airflow System Knob Tilt protection Special thermal insulation Robust certified construction technology Service-friendly control cabinet Removable ventilation plate Made entirely of stainless steel Self-ventilating door Electrical connection values 230 VAC Capacity single serving bowl 225 x 175 x 35 mm / 250 x 190 x 45 mm: 18 pieces Capacity portion trays 160  ...

La San Marco NEW 105 MULTIBOILER 3G portafilter machine espresso machine Touch (6) factory price 11,157 ,- € The NEW 105 Multiboiler series uses the latest technology from La San Marco. Multiboiler technology allows precise temperature control for each boiler of each individual group. The temperature is set in a simple and intuitive way on the keyboard of each group. The boiler for steam and hot water has an electronic automatic temperature setting, which can be easily adjusted via the touch screen keyboard. The innovative keyboard with touchscreen technology is complemented by a graphic RGB display. Setup and program advice is simple and intuitive, and the display provides a range of information that is of great benefit to the operator. The illumination of the workplace with adjustable multicolor LED makes the machine even more ergonomic with an eye on aesthetics. Groups: 3  ...

SCHUCH Hall Lighting 3066 / 400 Wide Spotlight - Mirror Reflector Lamp 3076 / 400 Downlight--Mirror Reflector Lamp 1 x HME 400 W IP20 lamp room with glass 230 V / 50 Hz can also be operated with LED lights.

Other Info: Gereedschap Meetmachine MAKE   Zoller TYPE    Genius 3 S YEAR   2006 DIMENSIONS Length   Z Axis length : 600 mm Width    X Axis length : 175 MM Height   Y Axis length : 100 mm CNC Driven, Adjustable 3D CCD camera and led lightingZoller Genius 3 tool measuring machine

bore capacity in steel (diameter): 50,0 mm arm length: 350 - 1.590 mm workpiece height max.: 645 - 1.240 mm turning speeds: 25 - 2000 U/min spindle taper MT: 5 MK base plate: 980 x 1.600 mm threading: 42 M quill stroke: 320 mm total power requirement: 4,0 kW weight of the machine ca.: 3.500 kg. range L-W-H: 2450 x 980 x 2840 mm Description : - Large-sized base plate - ideal for processing large workpieces - Thick-walled, polished column for increased sliding properties of the boom - Extension arm and drill head with independent hydraulic clamping - Simple height adjustment of the extension arm using a lifting motor - Ideal for drilling, countersinking, reaming and thread cutting - Hardened and ground gears, running in an oil bath - Good sliding of the drill head on the boom thanks to the ground surface scope of delivery : - Cube table - Reducing sleeves MK 5/4, MK 4/3, MK3 / 2 - LED mach ...

used baler Manufacturer: BOA Type: IMPRESS D225-Eco Year of construction: 2022 Operating hours: 1.178 (am 29.03.2023) Specifications: Pressing force: 2112 kn / 215 t Specific pressing force: 16.0 kg/cm² Filling opening: 1,620 x 1,000 mm Bale format: 1,100 x 1,200 x length (adjustable) mm Drive power: 3 x 45 kW theoretical output: approx. 750 m³/h (without material) Throughput under operating conditions: - at 30 kg/m³ approx. 16-18 t/h - at 60 kg/m³ approx. 28-30 t/h - at 100 kg/m³ approx. 40-42 t/h - at 150 kg/m³ approx. 50-52 t/h - at 200 kg/m³ approx. 62-64 t/h Total connected load: 250 kW / 500 A Operating voltage: 400 V / 50 Hz electrical insulation: IP 54 Binding: 5 x vertical + 5 x horizontal Bale weight: up to approx. 1,400 kg Machine dimensions: 13,400 x 2770 x 3,065 mm (L x W x H) Machine width with additi ...

COLOR SORTER BY IST ITALY, new in 2017, little use Was used for cereals, legumes, seeds sorting line Replaced by a more sophistcated new one but was in perfect working condition when replaced. Stored in a dry conditions currently. 3+ chutes, 3 for sorting, one for recycling, 256 ejectors or 64 ejectors by chute, 4098 pixels, led lights OUTPUT : till 12 tonnes according to the manufacturer original technical liftlet. Information on request, shipping to any destination Can be seen near Amiens 80, northern France See also website : milin cereal equipment Brittany, France

Single needle triple transport long arm sewing machine equipped with: - Thread cutter - Locking - Press base ventilation - Stroke quick adjustment - 2. Stitch length - Frame and table top - LED sewing light - 12 mm stitch length - Servo motor with control panel - electronic handwheel

- Infinitely variable speed control - Quickly adjustable drilling depth stop - Thread cutting device - Undervoltage triggers - Table height adjustment via rack - LED lighting in the head - Continuous/normal drilling capacity R1: 23/25 mm - Thread cutting performance (depending on slope) R1: max.M 16x1 - Spindle MK II - Drilling depth 100 mm - Projection 260 mm - Column diameter 110 mm - Usable table surface (W x L) 420 x 340 mm - T-slot size (arm): number 2, distance 125 mm - Speed display digital - Drilling depth display digital - Drill depth stop quickly adjustable - Feed by hand - Motor three-phase current 400 V - Spindle speeds infinitely variable R1 with 20-2,000 1/min Option: Coolant device: € 525,- FACTORY WARRANTY: 3 years DELIVERY: free domicile incl. packaging NOT THE RIGHT MACHINE? WE ALSO CARRY OTHER FLOTT PRODUCTS - ASK FOR A QUOTE! FAS ...

used baler Manufacturer: BOA Type: IMPRESS D225-Eco Year of construction: 2022 Operating hours: 1.178 (am 29.03.2023) Specifications: Pressing force: 2112 kn / 215 t Specific pressing force: 16.0 kg/cm² Filling opening: 1,620 x 1,000 mm Bale format: 1,100 x 1,200 x length (adjustable) mm Drive power: 3 x 45 kW theoretical output: approx. 750 m³/h (without material) Throughput under operating conditions: - at 30 kg/m³ approx. 16-18 t/h - at 60 kg/m³ approx. 28-30 t/h - at 100 kg/m³ approx. 40-42 t/h - at 150 kg/m³ approx. 50-52 t/h - at 200 kg/m³ approx. 62-64 t/h Total connected load: 250 kW / 500 A Operating voltage: 400 V / 50 Hz electrical insulation: IP 54 Binding: 5 x vertical + 5 x horizontal Bale weight: up to approx. 1,400 kg Machine dimensions: 13,400 x 2770 x 3,065 mm (L x W x H) Machine width wit ...

Scanware Blister Control System: - Screen EM TFT 15" - Camera system DOM-323/SU/4C (with 3x camera JAI CV-M71CL) - Product recognition system LYNX-Spectra - Multiplexer MUX-3 3xCL - White light LED lighting LEDW-Po3/S5 - Lighting attachment ES-323 - Light panel KAN-303 - Network and I/O module S02

rated capacity: 3,2 KW rated current: 16/5,0 Ampere output voltage: 2 x 230AC / 1 x 12DC V weight of the machine ca.: 35 Kg dimensions of the machine ca.: 550 x 400 x 450 mm A quiet, powerful and reliable 3200 W generator. - Mobile thanks to two smooth-running wheels. - Durable and energy-efficient 4-stroke engine with eco function. - Ideal for traveling with a camper, caravan or tent. - Equipped with LED display, 230V and 12V DC output. - Automatic protection against overload and lack of fuel. - Only 35 kilograms (!). Easy to transport and store. - Noise level: very quiet, only 59 dB (A) at a distance of 7 m. - Fuel: Euro unleaded The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning length: 1000 mm turning diameter: 360 mm turning dia. in gap: 480 mm spindle bore: 51,0 mm turning speeds: 70 - 2000 U/min bed width: 185 mm spindle taper: 55029 D 1-5 taper in tailstock: 4 MK quill travel: 110 mm total power requirement: 1,5 kW weight of the machine ca.: 540 kg. range L-W-H: 1920 x 750 x 1600 mm Furnishing : - 3-axis digital display i200 with LCD display - 3-jaw chuck DK11-200 mm / D5 - Face plate 200 mm / D5, according to DIN 55029 - Fixed bezel - passage diam. max. 70 mm - Live steady rest - passage diam. max. 50 mm - coolant device - First filling with Shell Tellus 46 - Pull-out chip tray - clamping disc 320 mm - Quadruple steel holder - Protective device with quadruple steel holder - slip clutch - Longitudinal micrometer stop - Thread clock - LED machine light - reducing sleeve - change gears - 2 center points - Foot pedal with brake function according to CE ...

turning length: 1000 mm turning diameter: 380 mm turning dia. in gap: 490 mm spindle bore: 51,0 mm turning speeds: 70 - 2000 U/min bed width: 185 mm spindle taper: 55029 D 1-5 taper in tailstock: 4 MK quill travel: 120 mm total power requirement: 1,5 / 2,2 kW weight of the machine ca.: 575 kg. range L-W-H: 1920 x 800 x 1660 mm Furnishing : - 3-axis digital display i200 with LCD display - 3-jaw chuck DK11-200 mm / D5 - Face plate 200 mm / D5, according to DIN 55029 - Fixed bezel - passage diam. max. 70 mm - Live steady rest - passage diam. max. 50 mm - coolant device - First filling with Shell Tellus 46 - Pull-out chip tray - clamping disc 320 mm - Quadruple steel holder - Protective device with quadruple steel holder - slip clutch - Longitudinal micrometer stop - Thread clock - LED machine light - reducing sleeve - change gears - 2 center points - Foot pedal with brake function according ...

Standard equipment - Thread cutting device - Control panel with OLED display - robust, high-quality drill head hood - LED lighting - quickly adjustable and ergonomic drilling depth stop - infinitely variable speed control via rotary knob - thermal overload protection - Spindle stop - Drilling protection with electr. Hedge - Connection cable with CEE plug - mechanical feed of the Z-axis - incl. electromagnetic coupling for 3 feed speeds - Drill cross with push button - in thread cutting mode: right-left SPECIFICATIONS Continuous/normal drilling performance (mm) R1 - 27/32 (in E335/ST60) (100) R2 - 25/30 (in E335/ST60) (70) R3 - 30/35 (in E335/ST60) (200) Thread cutting capacity max.: R1= M24x3, R2= M20x2.5, R3= M30x3.5 Spindle MK III Drilling depth: 125 mm Projection: 300 mm Column diameter: 125 mm Usable table surface (W x D): 590 x 450 mm Speed display digit ...

La San Marco NEW 105 MULTIBOILER 2G portafilter machine Original price 8.800 ,- € In the NEW 105 Multiboiler series, the latest technology from La San Marco has been applied. Multiboiler technology allows precise temperature control for each boiler of each individual group. The temperature is set in a simple and intuitive way on the keyboard of each group. The boiler for steam and hot water has an electronic automatic temperature adjustment, which can be easily adjusted using the touchscreen keyboard. The innovative keyboard with touchscreen technology is complemented by a graphic RGB display. Setup and program advice is simple and intuitive, and the display also provides a range of information that is of great benefit to the operator. The illumination of the workstation with customizable multicolor LED makes the machine even more ergonomic with an eye on aesthetics. Grou ...

Profile projector manufactured by MITUTOYO type PJ 250Technical specifications:rotating screen diameter: 250 mmLens: 10xResolution: 0.001 mmWith- built-in digital LED display for angle measurementused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

La San Marco NEW 105 MULTIBOILER 2G portafilter machine Original price 8.800 ,- € In the NEW 105 Multiboiler series, the latest technology from La San Marco has been applied. Multiboiler technology allows precise temperature control for each boiler of each individual group. The temperature is set in a simple and intuitive way on the keyboard of each group. The boiler for steam and hot water has an electronic automatic temperature adjustment, which can be easily adjusted using the touchscreen keyboard. The innovative keyboard with touchscreen technology is complemented by a graphic RGB display. Setup and program advice is simple and intuitive, and the display also provides a range of information that is of great benefit to the operator. The illumination of the workstation with customizable multicolor LED makes the machine even more ergonomic with an eye on aesthetics. Grou ...

Roundness tester make MITUTOYO type Roundtest RA 122Code no. 211-941D, serial no. 920069 built in 1992consisting of:MEASURING UNIT RA 1001 control and evaluation unit RE 12 buttons No. 211-046Technical specifications:Turntable: air-bearingMeasuring range / workpiece diameter: 280 mmMeasuring range / workpiece height outside: 220 mmMeasuring range / workpiece height inside: 110 mmRoundness of the turntable: 0.08 + 6 H / 10000 µmSpeed: 6 rpm.Table diameter: 110 mmCentering range: +/- 2 °Leveling range: +/- 1 °Weight: 32 kgDimensions L x W x H: 252 x 404 x 545 mmBUTTONMeasuring range: +/- 0.25 mmStylus radius: 1 mmMeasuring force: 70-100 mNCONTROL AND EVALUATION UNITFilter: 15, 50, 150, 500 oscillations / revMeasuring range max .: +/- 250 µmMagnification: 100 x - 20000 xautomatic compensation: eccentricity, coaxialityParameters: roundness, center offset: Top height, valley depths, evenn ...

Central extraction system for soldering stations and welding workplaces make KEMPER type 91890Fabr. -No: 300374-03 built in 1998for 3 - 7 jobs,The material liquefied during the soldering process releases smoke, gases and aerosols, which must be sucked off. The Kemper extraction system was specially designed for use at soldering stations. He sucks the substances punctiform.Filtering in 3 stages: pre-filter, suspended particle filter,: Activated Carbon FilterFlow rate: 700 m3 / hMax. stat. Pressing: 1600 PaConnection voltage: 380VRated current: 2.5 AMotor power: 1,1 kWDuty cycle: 100% EDWith:- Control panel and electronic filter monitoring- Monitoring the activated carbon filter by means of LED chainused, in very good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We  ...

bore capacity in steel (diameter): 32,0 mm threading: 22 M bore stroke: 125 mm throat: 280 mm morse taper: 3 MK table:: 450 x 380 mm / 14er Nut turning speeds: 70 - 3.500 U/min feed: 0,1 / 0,2 / 0,3 mm/U column diameter: 110 mm weight: 320 kg range L-W-H: 500x800x2.100 mm total power requirement: 1,1 / 2,2 kW characteristics Infinitely variable speed, ideal for setting the desired one Cutting speed. Automatic tool ejector and Thread cutting device as standard. Electromechanical drilling feed, adjustable from 0.1 - 0.3 mm / rev Solid gray cast iron table with rotating and swiveling support surface T-slots in the machine base enable high workpieces to be clamped. Guaranteed concentricity = 0.02 mm, measured in the quill Hardened and ground gears ensure smooth running Adjustable drilling depth stop with an easily readable scale Scope of delivery: - Drill chuck arbor MK 3 / B 16 - Reducing s ...

turning length: 1500 mm turning diameter: 410 mm swing diameter over bed slide: 255 mm turning dia. in gap: 580 mm spindle bore: 52,0 mm turning speeds: 30 - 3000 U/min bed width: 250 mm spindle taper: 55029 D 1-6 taper in tailstock: 4 MK quill travel: 120 mm total power requirement: 5,5 kW weight of the machine ca.: 1400 kg. range L-W-H: 2530 x 1000 x 1450 mm scope of delivery : - 3-axis digital display ES-12 V with LCD display - 3-jaw steel chuck PO3-200 mm / D6 - clamping disc 350 mm - Fixed bezel - passage diam. max. 135 mm - Live steady rest - passage diam. max. 65 mm - Foot pedal with brake function according to CE - Quadruple steel holder - Protective device with quadruple steel holder - Micrometer longitudinal stop - Revolver stop with fine adjustment - Frequency converter - First filling with Shell Tellus 46 - coolant device - slip clutch - Thread clock - LED machine light - cha ...

automatic chamfering and beveling machine Development and production in England - CNC Mitsubishi control M70 - automatic start of the cycle - automatic switch-off in case of repeatable chamfer lengths - Colour touchscreen control panel - max. spindle speed 3,000 rpm - Rod diameter 8-80 mm - hydraulic 3-jaw chuck - Cutting head suitable for all material sizes - quickly replaceable ISO inserts - max. chamfering/turning length 37 mm - Incl. turning and chamfering tool - 4 kW motor - High-precision Mitsubishi servo drive - Ball screw with high thrust capacity - Large machine door - Internal, powerful LED work light - Shavings collection container with external shavings basket - Lifting points for pallet trucks - Weight 500 kg - Dimensions L/W/H 1000x600x1200 mm CE - certified

Wölco Lupo VPAB-53 labelling system Fully automatic labeling machine for professional labeling Broadband Multi-Labeler Manufacturer: Wölco Masch. Type: Lupo VPAB-53 YOC 2011 Connection: 400V Current 3 x 16 A Power: 2.5 kW Air: 6 bar Broadband Multi-Labeler Wölco Lupo VPAB-36 Manufacturer: Wölco Masch. Type: Lupo VPAB-36 YOC 2011 Connection: 400V The Lupo VPAB-36 is the ideal device for permanent industrial operation when precise and variable label printing with position-accurate application is required. Sato Printer S84 ex Label Printing System The SATO S84-ex/S86-ex printer is a very powerful, automated label printing system with a user-friendly design and a wide range of functions. This printer with its solid Design is designed for continuous operation. The main features of the printer are: • Two-color LCD backlight and two-color status LED ...

Estimated stock: approx. 4 pcs. Advantages: - Optimal airflow through AirSurround technology. The airflow rotates upwards instead of downwards. Cooled air sinks to the bottom. Warm air is sucked in and cooled by the device. - App control. This makes it possible to control the room temperature from anywhere - Magnetic, minimalist and responsive remote control - Circular cover for optimal airflow - Best mobility thanks to discreet wheels The scope of delivery includes: 01x Air conditioner, new Manafacture: AEG Type: PX71-265WT Product dimensions: 955 x 388 x 388 mm Package dimensions: 531 x 459 x 1,190 mm Cooling capacity: 2.6 kW EER: 3.1 Energy efficiency cooling: A+ Heating capacity: 2.1 kW COP: 2.8 Energy efficiency heating: A+ Noise level max.: 64 dB(A) For room size: 30 - 40 m² / 70 - 90 m³ Functions: Heating / Cooling / Fan / Dehumidification / Auto Air Fl ...

Advantages: - Air conditioning efficient and elegant - Ideal conditions for a restful sleep at perfect temperatures - For rooms with a size of 40 - 50 m² - Reduction of potential global warming through environmentally friendly refrigerant R290 - 360° wheels for best mobility The scope of delivery includes: 01x Air conditioner, new Manafacture: AEG Type: ChillFlex Pro AXP35U538CW Product dimensions: 796 x 493 x 420 mm Package dimensions: 885 x 570 x 515 mm Cooling capacity: 3.5 kW EER: 3.1 Energy efficiency cooling: A+ Noise level max.: 64 dB(A) For room size: 40 - 50 m² / 90 - 115 m³ Functions: Cooling / Fan / Dehumidification / Auto Air Flow Volume, Max Cooling: 420 m³/hour Remote control: available with LCD Timer: available Display: LED Display Speeds: Low/Med/High/Auto Dehumidification capacity: 1.6 liters / hour Cooling power consumption: 1.2 kWh / hour ...

Epson C3-A601S 6-Axis Robot Assembly Station Assembly of parts for car radios and navigation systems and for testing them. The assembly station is surrounded by a protective enclosure. The service doors are equipped with interlocking monitoring switches. The doors are locked in automatic mode and can only be opened when the automazik stop or in manual mode after pressing the doors on the control panel. When the door is open, automatic operation cannot be started, the robots and servo drives of the Statioin are stopped, the pneumatic actuators are switched off and cannot be operated. This station consists of 3 functional substations: Functional sequence St.6.1: Control of ribbon cables: Lift the drive out of the chassis and tilt the drive code Control of 3 ribbon connectors by means of vision sensors on the robot gripper arm Reseat the drive in chassis St.6. ...

max. grinding diameter: 238 - 620 mm grinding length: 190 mm workpiece length: 380 - 940 mm spindle turning speed - stepless: 2 - 12000 U/min current capacity: 380 kVA power capacity - grinding motor: 1,1 kW total power requirement: 2,2 kW weight of the machine ca.: 0,6 t Mechanic: very good: Optical condition: very good: The machine can be viewed under current.: operating key and instruction: 2016 S25 003004 400 V, 50/60 Hz, with CEE plug and cable Color: light gray motorized height adjustment, axial grinding spindle adjustment Equipment: Opto-electronic measuring device with measuring electronics Image processing, PC (Original ISOG) CCD camera and monitor Dividing head Sk 40 with dividing disk 24 R 1 dividing disk each 14, 16, 18 Tightening screw M 16 Counter bearing complete with 4 center punch points Center point Sk 40 with driver Twist-u. Relief grinding device with rac ...

- Thread cutting device - Control panel with OLED display - LED lighting - Quickly adjustable and ergonomic drilling depth stop - Infinitely variable speed control via central rotary knob - Thermal overload protection - Spindle stop - Drilling protection with electr. Hedge - Connection cable with Schuko plug SPECIFICATIONS - Spindle: B16 - Drilling depth: 60 mm - Projection: 220 mm - Column Ø: 70 mm - Spindle/work surface: 140 – 315 mm - Drill head height adjustment: by hand - Speed display: Digital - Drilling depth display: Digital - Feed (mm/revolution): by hand - Spindle speeds infinitely variable: 60 – 6,000 1/min - Continuous/normal drilling capacity: 10/12 mm - Thread cutting performance (depending on slope): M6 - FACTORY WARRANTY: 3 years (single shift) - OPTION Drilling package (No. 296570) Machine vice Flott [felix] 80 and quick-release drill c ...

Planetary agitator Model: Rego PM 40 E Stirring machine Power adjustment infinitely variable Intervention - Protective grille LED control with timer 1 stainless steel boiler 40 liters 1 broom, 1 flat stirrer electric boiler stroke Stand-alone machine with tank car DGUV V3 tested Connection 400V, 2,3 kW,16A-CEE plug Dimensions: 970 x 680 x 1700 mm, DxWxH Weight 400 kg. Used machine overhauled with 6 months warranty

Planetary Agitator Stirring Machine Model: Rego PM 60 E Power adjustment infinitely variable Intervention - Protective grille LED control with timer 1 stainless steel boiler 60 liters 1 broom, 1 flat stirrer electric boiler stroke Stand-alone machine DGUV V3 tested Connection 400V, 4 kW,16A-CEE plug Dimensions: 970 x 680 x 1700 mm, DxWxH Weight 500 kg. Used machine overhauled

Paint booth: Make : SAIMA Year of manufacture : 2018 Dimensions: 3.95 m x 7.21 m x 3.25 m (approx. WxLxH) Supply air blanket : Filter blanket Lamps : 23 pcs. LED downlights Entrance side : 4-leaf folding gate 3.8 m x 3.1 m (approx. WxH) Escape door : lateral, 0.9 x 2.1 m (approx. WxH) Rusting : none, due to sidewall extraction on both sides Heating unit : approx. 255 kW, gas surface burner Drying temperature : 80 degrees C Supply unit : 33,000 m3/h; 11 kW Exhaust unit: 33,000 m3/h; 11 kW Pipelines : supply and exhaust air pipelines, deflector hood, etc. Electrics : Electrical cabinet Location : Münche area Selling price : € 16.990,- net ex site without dismantling

Planetary agitator Model: V-Mixer 120 L Professional machine with robust technology! for best results! LED display 10 power levels and timer Intervention protection / safety grille with protective circuit Stirring machine with tool: 1 whisk, 1 dough hook, 1 flat stirrer 1 120 litre stainless steel boiler Boiler stroke electric DGUV V3 tested Connection 400V, 6 kW, 16A-CEE plug Dimensions: 853 x 1102 x 1958 mm, WxDxH New machine with 24 months warranty Option: - Programming of 20 recipes with 7 steps each - Time programming - Tank wagons - Air pressure connection for more volume

Standard equipment: robust, high-quality and inclined rotary hood for easy reading of the speed LED lighting quickly adjustable and ergonomic drilling depth stop infinitely variable speed control Connection cable with SCHUCO plug (1.2 m) Undervoltage outlets Drilling protection with electr. Hedge thermal overload protection Emergency Stop Impact Button Weight in kg: 44 Motor kW: 0,45 AC 230 V Speed 1/min: 250-3000 Drilling capacity mm: - Steel Ø 12 mm - Aluminium Ø 20 mm - Softwood Ø 40 mm - Drilling depth 60 mm - Projection 220 mm - Saeulen diameter 70 mm - usable table area (W x L) 300 x 250 mm - T-groove size number 2, distance 100 mm Dimensions width 14/26 mm - Spindle B 16 - Speed display digital - Drilling depth display: scale - Drill depth stop: quickly adjustable stop ring - Feed: by hand - FACTORY WARRANTY: 3 years - free domicile incl. packa ...

Column drilling machine ALZMETALL type AB 4 SV Masch. No. 14805 Year of construction approx. 1980 Drilling capacity 40 mm Spindle mount MK 4 - short quill Projection 340 mm Quill stroke 180 mm Table size 710 x 560 mm Column diameter 160 mm Spindle speed 30 - 765 rpm infinitely variable Motor power 2.3 and 3.4 kW pole switchable Mains connection 380 volts, 50 Hz spindle speed via 2 gear stages and infinitely variable via variator gear - Counter stage for high torque at low speeds - Spindle on/off via rotary switch or electric foot switch - Automatic feed 0.1 - 0.2 - 0.3 mm/U - Table height adjustment via hand crank - Machine foot with machined workpiece contact surface - LED lighting device Space requirement L x W x H 1200 x 725 x 2050 mm Weight 615 kg good condition; used

bore capacity in steel (diameter): 55,0 mm throat: 300 mm bore stroke: 140 mm morse taper: 4 MK table:: 615 x 430 mm turning speeds: 70 - 1.200 U/min engine output: 1,8 / 2,9 kW column diameter: 145 mm thread: M30 ST60 thread: M36 GG20 feed: 0,10 + 0,30 mm/U weight: 380 kg Machine height: 1850 mm NEW ALZMETALL MODEL RANGE 7 TFT - LCD display with touch function: Spindle speed setpoint Actual speed display Integrated drilling depth display with touch zero point transfer Virtual drilling depth scale in the display Machine status displays and warnings in the display Service information Selectable user language: DE / EN / FR / ES / IT / NL / RU. Furnishing: - Thread cutting device for thread cutting with a stop max. 6 threads / min (thread cutting performance depends on the spindle speed) Thread depth adjustable via depth stop in the TFT - LCD display (3 tools). - automatic spi ...

bore capacity in steel (diameter): 30 mm throat: 270 mm bore stroke: 125 mm : 4 Motor output: 9 speeds: 120 - 1810 U/min With V-belt drive in a modern design / 3020640SET - Heavy execution of the whole machine - Very smooth running thanks to the new spindle design - industrial engine - Separate emergency stop impact switch - drilling depth stop - LED machine light integrated in the drill head - Precisely machined, stable drilling table with diagonal T-slots with circumferential cooling water channel - Drilling table can be tilted ± 45 ° and rotated 360 ° - V-belt cover with safety switch - Precision spindle bore - Machine operation of safety electronics in 24 V DC voltage - Guaranteed concentricity = 0.02 mm measured in the drilling spindle - Thick-walled steel column for high force absorption and stability - Solid, large base plate with T-slots scope of delivery - Keyless chuck 0 - 1 ...

bore capacity in steel (diameter): 34,0 mm throat: 300 mm bore stroke: 160 mm morse taper: 4 MK table:: 615 x 430 mm turning speeds: 100 - 1.800 U/min engine output: 1,4 / 2,2 kW column diameter: 145 mm thread: M24 ST60 thread: M30 GG20 feed: 0,1-0,2-0,3-0,4 mm/U weight: 470 kg Machine height: 1865 mm NEW ALZMETALL MODEL RANGE 7 TFT - LCD display with touch function: Spindle speed setpoint Actual speed display Integrated drilling depth display with touch zero point transfer Virtual drilling depth scale in the display Machine status displays and warnings in the display Service information Selectable user language: DE / EN / FR / ES / IT / NL / RU. Furnishing: - Thread cutting device for thread cutting with a stop max. 6 threads / min (thread cutting performance depends on the spindle speed) Thread depth adjustable via depth stop in the TFT - LCD display (3 tools). - Infinite ...

bore capacity in steel (diameter): 14 mm throat: 200 mm bore stroke: 60 mm morse taper: 1 MK table:: 280 x 260 mm turning speeds: 430 - 4500 U/min column diameter: 70 mm weight: 100 kg NEW ALZMETALL MODEL RANGE 7 TFT - LCD display with touch function: Spindle speed setpoint Actual speed display Integrated drilling depth display with touch zero point transfer Virtual drilling depth scale in the display Machine status displays and warnings in the display Service information Selectable user language: DE / EN / FR / ES / IT / NL / RU. Furnishing: - Thread cutting device for thread cutting with a stop max. 6 threads / min (thread cutting performance depends on the spindle speed) Thread depth adjustable via depth stop in the TFT - LCD display (3 tools). - automatic spindle feed with feed overload protection - Infinitely variable speed setting by means of an adjusting lever - Spin ...

Lamidesk EasyShift 400/160 Laminator Lamidesk EasyShift 400/160 Flatbed Laminator Characteristics: max. lamination width: 1600 mm max. lamination length: 4000 mm min. table height: 850 mm max. clearance height: 60 mm Max. speed: 0 - 25 m/min Control: Roller pressure: pneumatic Engine operation: yes Speed: Rotary control Equipment: Countertop: 10 mm toughened safety Height adjustment: optional Table lighting: optional Propulsion: Motor / manual Heated roller: optional Movable (rollers): yes Specifications: Compressor connection: Euro plug Air pressure / demand: 6 bar - 4 l/min. Power supply: 240 V Power consumption / with LED: 380 W / 780 W Device dimensions: 4710 x 1950 x 1000 mm Weight device: approx. 630 kg Quality LamiDesk is manufactured with well-known components that are available worldwide. The use of these components ensures continuous operation a ...

rated capacity: 2,6/2,8 KW frequency: 50 Hz output voltage: 2 x 230AC / 1 x 12DC V tank capacity: 15 l weight of the machine ca.: 48 Kg dimensions of the machine ca.: 700 x 500 x 600 mm A quiet, powerful and reliable 3200 W generator. - Mobile thanks to two smooth-running wheels. - Durable and energy-efficient 4-stroke engine with eco function. - Ideal for traveling with a camper, caravan or tent. - Equipped with LED display, 230V and 12V DC output. - Automatic protection against overload and lack of fuel. - Only 35 kilograms (!). Easy to transport and store. - Noise level: very quiet, only 59 dB (A) at a distance of 7 m. - Fuel: Euro unleaded The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Projection: 610 mm Installation height: 340 mm Working height: 1015 mm Table size: 600 x 500 mm Table size additional table: 220 x 500 mm Band saw blade length: 3970 mm Cutting speed, infinitely variable: 20 - 85 / 120 - 500 m/min Band saw width: 3 - 16 mm Table tiltable, 4 directions: 15° Main engine power: 1.5 kW Connected load band welder: 2.4 kVA Weight, approx.: 700 kg Equipment: - Stepless cutting speed - Belt welding device - Band saw blade in adjustable precision guides - All-round tiltable tiltable (not applicable to machines with table feed due to design) - Belt scissors - Sanding unit - Chip brush - Eye bolt for moving the machine - Machine light . LED speed indicator - Blow-out device -CE

Cutting width: 1010 mm Cutting height: 340 mm Working height: 1000 mm Table size: 600 x 500 mm Stepless cutting speed: 1st gear: 20-85 m/min 2nd gear: 120 - 500 m/min Band saw blade length: 4540 mm Band saw width: 3 - 16 mm Tilting and tiltable table in 4 directions: 15° Motor power: 1.5 kW Weight, approx.: 800 kg Equipment: - Band saw blade - Stepless cutting speed - Belt welding device - Band saw blade in adjustable precision guides - All-round tiltable tiltable (not applicable to machines with table feed due to design) - Belt scissors - Sanding unit - Chip brush - Eye bolt for moving the machine - Machine light - LED speed indicator - Blow-out device -CE

Cutting width: 355 mm Cutting height: 230 mm Working height: 960 mm Table size: 500 x 400 mm Stepless cutting speed: 20 - 90 m/min Band saw blade length: 2840 mm Band saw width: 3 - 16 mm Tilting and tiltable table in 4 directions: 15° Motor power: 0.75 kW Weight, approx.: 250 kg Scope of delivery: - Band saw blade - Stepless cutting speed - Belt welding device with annealing unit - Machine light -Scissors - Grinding station - Chip brush - Blow-out device - LED digital display (to indicate the cutting speed) - Table with stop groove - Parallel fence -CE