led used for sale

Hazard lights, night signs, flash lights, day and night signs -Signal lights for: wind turbines -GF light: RE-LED 865/864 (White/Red) -Housing: aqua signal -Price: per piece -Number: 2 pieces -Dimension: Ø 356/675 mm -Total weight: 17 kg

: neu : ca. 6 Monate ab Auftragse : Taiwan : 66760 € : 1341.88 € : 600 mm : 600 x 300 mm : 610 mm : 600 x 300 mm : 420 kg : 700 mm : 5 - 25 m/min : 0 - 2.250 mm/min : 350 mm : 0.001 - 32 : 440 mm : 0 - 675 mm/min : 0.001 - 0.04 mm : 500 - 2000 1/min : 5,5 kW : 0.75 kW : 1.1 kW : 1.1 kW : 2710 mm : 2428 mm : 2200 mm : 3500 kg : 975 mm : 355 x 50 x 127 mm 10,4", grafic NC-control on swiveling arm with touch screen for: - seletion of working mode, program creation, graphic condition control, alarm list aut. vertical feed servo drive for grinding wheel feed and table cross feed hardened slide ways in all 3 axes with needle rollers electro-magnetic chuck coolant equiptment with aut. paper filter and magnetic separator autom. dressing attachment with diamond, with compensation device _FULLY ENCLOSED SPLASH GUARD PROTECTION OF WORKING AREA_ grinding wheel grinding wheel flange grinding  ...

x-travel: 290 mm y-travel: 150 mm z-travel: 330 mm table surface area: 210 x 600 mm total power requirement: 9,5 kVA weight of the machine ca.: 730 kg dimensions of the machine ca.: 2000 x 2200 x 1655 m The machine is in very good condition and comes from a from a training workshop. Equipment: Safety cover and LED lamp retrofitted in 2016 3-axis active digital readout made by Heidenhain Fixed angle table Coolant equipment Technical data: Longitudinal table movement, motorised / manual 290/300 mm Headstock transverse movement, motorised / manual 150/160 mm Vertical support movement, motorised / manual 330 / 340 mm Work spindle drive 1.5/1.9 kW Number of milling spindle speeds 16 Speed range 40 - 2000 1/min. Horizontal milling spindle Tool holder Standard taper 40 Feed range infinitely variable 5 - 500 mm/min. Creep speed 4 mm/min. Rapid traverse 1200 mm/min. The data for this ad was cre ...

x-travel: 290 mm y-travel: 150 mm z-travel: 330 mm table surface area: 210 x 600 mm total power requirement: 9,5 kVA weight of the machine ca.: 730 kg dimensions of the machine ca.: 2000 x 2200 x 1655 mm The machine is in very good condition and comes from a a training workshop. Equipment: Safety cover and LED lamp retrofitted in 2016 3-axis active digital readout from Heidenhain Fixed angle table Coolant equipment Technical data: Longitudinal table movement, motorised / manual 290/300 mm Headstock transverse movement, motorised / manual 150/160 mm Vertical support movement, motorised / manual 330 / 340 mm Work spindle drive 1.5/1.9 kW Number of milling spindle speeds 16 Speed range 40 - 2000 1/min. Horizontal milling spindle Tool holder Standard taper 40 Feed range infinitely variable 5 - 500 mm/min. Creep speed 4 mm/min. Rapid traverse 1200 mm/min. The data for this ad was created wi ...

bore capacity in steel (diameter): 55,0 mm throat: 300 mm bore stroke: 120 mm threading: M 36 in St 60 turning speeds: 70 - 1.200 U/min table:: 615 x 430 mm bore spindles - Morse Taper: 4 Kurzspindel MK column diameter: 145 mm feed: 0,10 + 0,30 mm/U weight: 380 kg Machine height: 1850 mm Furnishing : - automatic feed - Feed device 0.1 + 0.3 mm / rev - stepless speed adjustment - digital speed display - Feed overload protection - Spindle protection with electr. validation including special equipment: - Coolant device mounted in the foot pos. 24. - Thread cutting device pos. 20.0 (Thread cutting with stop) - LED machine light pos. 12. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Romanian lathe type SNA x 3000 mm, man. 1980 the machine is overhauled. The lathe is fully functional. It has a new electrical system and new position readings. It is equipped with: a ruler for turning cones, a lathe chuck fi 315, left and right jaws, LED lighting, cooling system, DTR. Technical data: - turning diameter over the bed [mm]: - 800 - turning diameter over the slide [mm]: - 392 - spindle bore diameter [mm]: - 82 - engine power [kW]: - 18.5 - overall dimensions [mm]: - length: - 5325 - width: - 1510 - height: - 1560 - weight of the machine tool [kG]: about - 5500

AMADA, model HFT 220-3 (220 tons, 3340 mm bending length). Machine from 2003, purchased in 2004, very good condition for the year, serviced, has its power, no leaks. The machine has, among others: - Laser Safe operator safety system - modified hydraulic control to digital - new hydraulic oil and filters - 4 movable bumper fingers in the Z axis (rare configuration) - controlled CNC axes: Y1, Y2, X, R - instruction manual in Polish - lighting of the working field with LED lamps (front and center) - 230 V AC sockets at the back of the machine (2 pcs.) - serviced control box - replaced computer and PLC cooling - a set of tools visible in the picture sheet 6-8 mm few hours Accessories included (4 x 835 mm tool kit, front rests, clamps).

Sells AMADA LC1212 A2 Laser cutting from 1998 With 45,000 hours of operation Laser power 1.5kW FANUC 16-L series console upgraded with LED lighting Possibility of cutting sheets with a width of 1380mm Sold with Delta Neu JetPack 40 vacuum cleaner The machine was serviced by AMADA Its use is daily, giving you the opportunity to see it in action It will be available in mid-November Removal must be carried out by you (conditioning, transport, installation) Sale for purchase of a new machine

Multiple Medifriger Biochrom Spekol B353POL Unicen food industry laboratory equipment for sale - Medifriger BL-S digital control refrigerated centrifuge. It works, it has hardly been used, so despite the possible years it has been here, it is almost new. - Biochrom® Asys Expert 96. Microplate reader. It works, has hardly been used. Preowned. - Analitik Jena Spekol 1500 UV/Vis spectrophotometer. It works and has been used continuously to this day. It is being sold as a replacement for a new one. - B353POL, Laboratory polarizing microscope, X-LED. It works, it has been used occasionally in the face of a high workload. It is being sold as a replacement for a new one. - Unicen 21 centrifuge. It works and has been used continuously until today. - P selecta ultrasound code: 3000617. It works and has been used occasionally. - Thermostatic bath, BAE model by Raypa. It works and has b ...

Description: Hood type 2 of zootechnics Anilis 1500, Noroit brand, compliant with standard EN12469-2000, can also be used as a change hood. Condition: Excellent, Year of purchase: End of 2018. We have 3 hoods, 2 Jouan and 1 Noroit, price given is for the 3 of them. Characteristics: Anilis 1500, fixed base. Fixed base: Standard height. Reduced height base. HSP: 2m20. Activated carbon under the worktop. Internal dimension, (W x D x H) in mm: 1590 x 570 x 640. External dimension, (W x D x H) in mm (without base): 1810 x 790 x 1513 External dimension, (L x D x H) in mm (fixed base with activated carbon): 1,810 x 875 x 2,313. Weight: 280 kg. Brightness: LED lighting> 1,100 lux. Max power: 1,600 W. Max air flow rate: 1,300 m3 / h. Handling protection: A very high efficiency HEPA filter removes particles from the ambient air before blowing into the handling chamber, achieving air ...

: neu : ca. 6 Monate ab Auftragse : 148100 € : 2947.19 € : 730 mm : 1200 x 600 mm : 1200 mm : 1200 x 600 mm : 1300 mm : 5 - 30 m/min : 0-2250 mm/min : 0,001-32 mm : 685 mm : 560 mm : 0-675 mm/min : 500-2200 1/min : 11 kW : 5.5 kW : 3.1 kW : 3.1 kW : 4790 mm : 3207 mm : 2305 mm : 8100 kg : 1150 kg : 1600 kg : 405 x 75 x 127 mm : 0,001 - 0,04 mm : 0,0001 mm iSurface control with Touch screen for 3 axes fully automatic surface and plunge grinding system 10.4” TFT high resolution color control to ensure ease of operation Rough increment, finish increment, spark out (0-9 times), and automatic grinding cycle Cycle interrupt, flip over for part inspection &, final dimensions set Wheelhead will rise up to end, start or reference positionnd table parks at left or right side after cycle is completed Display accuracy 0.0001mm I/O diagnosis &, alarm display Max. table speed (X axis) 30 m ...

Bakery oven Miwe cube : air /cube : stone with proofer and exhaust hood Fresh Food Miwe cube : air /cube : stone with proofer and exhaust hood year 2019, used Cube : air CBA 3.0406 Number of editions-3 for baking tray size/cm-40x60 cm Baking area approx. - 0.7 m2 Steam generator - with spray evaporator Door hinge - right Heat-insulating glazing - 3-fold heat-insulating glass Colour of the front glass pane - black Lighting - LED Control- Touch Control Miwe TC Software version - MIWE go! Electrical voltage - 400/230V; 3/N/PE Plug - CEE plug, 16 A Total connected load - 5,400kW Cube : stone CBS 2.0406 Heating - electric Baking area approx. - 0.5 m2 Hearth Soles - Stone Slabs Clear stove heights 130 mm Steam generator - with steam apparatus Steam valve - electric Heat-insulating glazing - heat-resistant safety glass Steu ...

MURAT - NR 241 - cutting, milling and screwing of reinforcement steel MURAT - KD 658/20 - 4 head welding machine MURAT - CN 770/20 - corner clean machine Capacity Min. 100 windows / 8 hours, Max. 120 windows / 8 hours All these machines make automatic production line for PVC systems. The price includes these three machines above and transporter of the frames between welding and corner cleaning. MURAT - NR 241 - Details: All sawing, routing, drilling, reinforcement steel screwing, marking and end milling operations on PVC profiles are gathered in one machine controlled by computer. Stacking of 10 profiles (max. 6,5 m length). Manual barcode labeling system integrated with single-lines. Servo controlled automatic swing of the saw to all angles between 30° and 150° with 0.1° accuracy. Drain slot routing, drilling and routing at variable angles. Automatic scr ...

x-travel: 490/500 mm y-travel: 290/300 mm z-travel: 370/380 mm turning speeds: max. 2500 U/min feed: 10-500 mm/min rapid traverse: 1500 mm/min quill stroke: 100 mm tool taper: Sk 40 x S 20 x 2 drive motor: 3,0 kW weight of the machine ca.: 1,3 t dimensions of the machine ca.: m Mechanic: good: Optical condition: good: The machine can be viewed under current.: Heidenhain digital readout, axes:: 3 central lubrication: 3 Achs Aktiv Heidenhain Digitalanzeige Zentralschmierung Abstreifer und Faltenbälge wurden getauscht Vertikalkopf Sk 40, Kühlmitteleinrichtung Spänewanne fester Winkeltisch 800 x 420 mm ca. 10 Spannwerkzeuge nach Wahl LED-Leuchte - auf Wunsch neu Bedienungsanleitung, Ersatzteilliste, Schaltplan, Bedienschlüssel Maschine ist werkstattgeprüft und mit elektrischem Prüfprotokoll ! Maschine ist auf Wunsch bei Auslieferung an die Maschinenrichtlinien angelehnt un ...

max. grinding diameter: 238 - 620 mm grinding length: 190 mm workpiece length: 380 - 940 mm spindle turning speed - stepless: 2 - 12000 U/min current capacity: 380 kVA power capacity - grinding motor: 1,1 kW total power requirement: 2,2 kW weight of the machine ca.: 0,6 t Mechanic: very good: Optical condition: very good: The machine can be viewed under current.: operating key and instruction: ! We have almost all spare parts for Decken S 11 machines in stock! DECKEL S 11 TOOL GRINDING MACHINE - UNIVERSAL with CE marking 400 V, 50 Hz, with CEE plug and cable #2385 Color white Motorized height adjustment, axial grinding spindle adjustment Machine stand milled + ground, new carrier plate Basic equipment: - including Waldmann LED light - including dust extraction completely without a vacuum cleaner - including protective cover for grinding wheels up to Ø 125 mm - incl. set of techni ...

Spiral mixer Diosna Model: SP 120 D ( new model ) Mobile kneading machine with brake, 2 LED timers, 2 gears, Stainless Steel Boiler and Spiral Dough machine with return button with flour dust hood for max. 120 kg of dough, with rewind button DGUV V3 tested Connection: 400 V, 8 kW, 18A, 32A-CEE plug Used machine overhauled with 6 months warranty With us you will find many more TOP spiral mixers!

grinding length: 1.000 mm grinding width: 600 mm workpiece height: 400 mm Control: SINUMERK 840 D Grinding Area: : grinding range: max. 1.000 x 600 mm travel cross (z-axis): 540 mm distance table surface - grinding spindle centre: max. 600 mm Travel vertical (Y-axis): 500 mm Max. working height on new grinding wheel: 400 mm workpiece table: : Electro permanent magnetic plate: 800 x 500 mm pole pitch: 18 mm clamping force in 8 levels: - Table drive (X-axis): : Incremental encoder in the longitudinal axis X axi: - table speeds: 2-35.000 mm/min Electromechanical longitudinal movement: - by means of digital servo motor,: - toothed belt and ball screw: - Preloaded precision rolling guide size 35: - Central grease lubrication: - Automatic vertical feed (Y-axis): : min. feed size: 0,001 mm measuring system: Galsmaßstab Max. distance spindle centre - table: 700 Grinding head vertical: 550 mm El ...

Key data: 4140 mm, 1570 mm, 200 mm

Features of the mechanical engineering method: Structure - The machine bed is made of an electro-welded steel structure, which is appropriately reinforced at the most stressed points. - The mobile gantry structure is realized with an electro-welded steel structure to minimize deformations due to the bending and torque generated during the use of the work center. Axis Movement - The boom is driven along the X-axis and the Y-axis by means of rack and pinion drive (hardened rack and a precision reduction gearbox with 2 pinions) - Movement of the machining unit in the vertical direction (Z-axis), carried out by means of ball screws with preloaded spindle nut. Guides of the axes - All axes travel on linear guides with recirculating ball sliding shoes. (Protection by sealing lip against dust and dirt) Auxiliary vacuum system - Enables the clamping of workpieces by means of va ...

Signal tower WERMA SIGNALTECHNIK LED continuous luminaire 24VAC/DC RD Article number: 843 100 55 Buzzer element continuous/pulse 24VAC/DC B article number: 844 118 55 connection element BWM 12-230VAC/DC BK article number: 840 085 00 bracket for wall mounting BK article number: 960 000 02 Operating voltage: 24 V AC / DC Degree of protection: IP54 New ! Dimensions: 220 x 85 x 70 mm

turning length: 1000 mm turning diameter: 360 mm swing diameter over bed slide: 220 mm turning dia. in gap: 502 mm spindle bore: 52,0 mm turning speeds: 70 - 2.000 U/min bed width: 185 mm spindle taper: 55029 D 1-5 taper in tailstock: 3 MK quill travel: 100 mm total power requirement: 1,5 / 2,2 kW weight of the machine ca.: 575 kg. range L-W-H: 1825 x 750 x 1600 mm scope of delivery : - 3-axis digital display i200 with LCD display - 3-jaw chuck DK11-200 mm / D5 - Face plate 200 mm / D5, according to DIN 55029 - Fixed bezel - passage diam. max. 70 mm - Live steady rest - passage diam. max. 60 mm - coolant device - First filling with Shell Tellus 46 - Pull-out chip tray - clamping disc 280 mm - Quadruple steel holder - Protective device with quadruple steel holder - slip clutch - Longitudinal micrometer stop - Thread clock - LED machine light - reducing sleeve - change gears - 2 center poi ...

bore capacity in steel (diameter): 30 mm throat: 254 mm bore stroke: 120 mm : 4 Motor output: 9 speeds: 120 - 1810 U/min column diameter: 92 mm table surface area: 475 x 425 mm total power requirement: 1,1 kW dimensions: 915 x 450 x 1705 mm weight: ca. 135 kg Column drilling machine OPTIdrill DP 33V promotion set / 3020680SET With an electronically controllable drive in a modern design Industrial engine Quiet running spindle thanks to new spindle design Machine operation with safety electronics in 24 V direct current Guaranteed concentricity = 0.02 mm in the measured drilling spindle Clockwise/counterclockwise rotation Precision spindle bore Control panel with user-friendly, dirt and water resistant Membrane keyboard RPM display Separate emergency stop button Tapping function Precisely crafted, stable drill table with diagonal T-slots with all-round cooling water channel, can ...

bore capacity in steel (diameter): 50,0 mm throat: 350 mm bore stroke: 200 mm threading: M 42 in St 60 turning speeds: 60 - 1.530 U/min table:: 720 x 510 mm bore spindles - Morse Taper: 4 Kurzspindel MK column diameter: 200 mm feed: 0,15-0,2-0,3-0,36 mm/U engine output: 3,6 / 4,3 kW weight: 605 kg Machine height: 1950 mm Furnishing : - automatic feed with electromagn. Feed clutch - 4 feed levels 0.15 / 02, - 0.3 - 0.36 mm / rev - stepless speed adjustment - digital speed display - Feed overload protection - Spindle protection with electr. validation - digital speed display - machined base plate including special equipment: - Coolant device mounted in the foot pos. 24. - Thread cutting device pos. 20.0 - LED machine light pos. 12. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 6 Monate ab Auftragse : Taiwan : 111210 € : 2213.08 € : 730 mm : 1.200 x 500 mm : 1200 mm : 1.200 x 500 mm : max. 30 m/min : 3.7 kW : 27 kVA kW : 4600 mm : 3040 mm : 2200 mm : 6400 kg : 990 mm : 930 kg : 1250 kg : 405 x 50 x 127 mm : 560 mm : 0 - 2.250 mm/min : 0,001 - 32 mm : 560 mm : 0 - 675 mm/min : 0,001 - 0,04 mm : 0,001 mm : 500 - 2.000 U/min : 11 kW iSurface control with Touch screen for 3 axes fully automatic surface and plunge grinding system 10.4” TFT high resolution color control to ensure ease of operation Rough increment, finish increment, spark out (0-9 times), and automatic grinding cycle Cycle interrupt, flip over for part inspection &, final dimensions set Wheelhead will rise up to end, start or reference positionnd table parks at left or right side after cycle is completed Display accuracy 0.0001mm Max. table speed (X axis) 30 m/min vertical feed by ...

: neu : ca. 6 Monate ab Auftragse : Taiwan : 42740 € : 867.62 € : 600 mm : 610 x 305 mm : 610 mm : 300 x 600 mm : 650 mm : 700 mm : 5 - 25 m/min : 1.100 mm/min : 1 - 12 mm : 370 mm : 1.5 kW : 0.004 kW : 0.19 kW : 7,4 kW : 2670 mm : 1810 mm : 2050 mm : 2100 kg : 355 x 50 x 127 mm : 1.450 U/min : 3,7 kW : 4 mm : 0,02 mm : 0,002 - 0,04 mm : 2 mm : 0,01 mm : 330 mm/min : 0,2 mm : 0,002 mm control panel on swiveling arm aut. vertical feed hardened slide ways in all 3 axes with needle rollers grinding wheel spindle on 4 high precision angular contact bearings electro-magnetic chuck coolant equiptment with aut. paper filter and magnetic separator man. extractor with diamond grinding wheel grinding wheel flange grinding wheel balancing scale balance arbor LED machine lamp machine and equipment according to the CE-regulations user manual in GERMAN and ENGLISH The data for this ad was created ...

: neu : ca. 6 Monate ab Auftragse : Taiwan : 33920 € : 688.58 € : 450 mm : 457 x 203 mm : 457 mm : 200 x 450 mm : 500 mm : 530 mm : 5 - 25 m/min : 960 mm/min : 0,4 - 6 mm : 0.75 kW : 0.004 kW : 0.19 kW : 3,7 kW : 2200 mm : 1575 mm : 1950 mm : 1320 kg : 203 x 12,7 x 31,75 mm : 230 mm : 2850 U/min : 1,5 kW : 240 mm : 4 mm : 0,02 mm : 0,002 - 0,04 mm : 2 mm : 0,01 mm : 330 mm/min : 0,2 mm : 0,002 mm control panel on swiveling arm aut. vertical feed hardened slide ways in all 3 axes with needle rollers grinding wheel spindle on 4 high precision angular contact bearings electro-magnetic chuck coolant equiptment with aut. paper filter and magnetic separator man. extractor with diamond grinding wheel grinding wheel flange grinding wheel balancing scale balance arbor LED machine lamp machine and equipment according to the CE-regulations user manual in GERMAN and ENGLISH The data for this ad ...

: neu : ca. 6 Monate ab Auftragse : Taiwan : 16410 € : 336.41 € : 460 x 146 mm : 457 mm : 450 x 150 mm : 482 mm : 180 mm : 1900 mm : 1400 mm : 2130 mm : 680 kg : 208 x 12,7 x 31,75 mm : 1,5 kW : 3 mm : 0,01 mm : 2 mm : 0,01 mm man. vertical feed grinding wheel spindle on 4 high precision angular contact bearings electro-magnetic chuck150x450 mm coolant equiptment with filter man. extractor with diamond grinding wheel grinding wheel flange grinding wheel balancing scale balance arbor LED machine lamp machine and equipment according to the CE-regulations user manual in GERMAN and ENGLISH The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Description: AHT MIAMI FREEZER 250 Model: MIAMI 250 R290 gas Temperature range: -18°C to -25°C / 0C° to +2C° depending on the desired type AUTOMATIC defrosting Danfoss INVERTER Technology LED Lighting FREEZER technical details: Length (inner/outer): 2300/2500 mm Depth (inside / outside): 720/850 mm Height (front/external access): 770/830 mm Volume (net): 850 litres Power consumption (at 25°C) 5.9 kW/24h Power: 450/500 W Refrigerant: R290A Each product Miami 250 AHT is refurbished, freezer line is tested and cleaned internally and externally. Ready to use.

Description: AHT MIAMI FREEZER 185 Model: MIAMI 185 R290 gas Temperature range: -18°C to -25°C / 0C° to +2C° depending on the desired type AUTOMATIC defrosting Danfoss INVERTER Technology LED Lighting FREEZER technical details: Length (inner/outer): 1770/1850 mm Depth (inside / outside): 830/990 mm Height (front/external access): 770/830 mm Volume (net): 650 litres Power consumption (at 25°C) 5.9 kW/24h Power: 450/500 W Refrigerant: R290A Each product Miami 250 AHT is refurbished, freezer line is tested and cleaned internally and externally. Ready to use.

Description: AHT MIAMI FREEZER 250 Model: MIAMI 250 R290 gas Temperature range: -18°C to -25°C / 0C° to +2C° depending on the desired type AUTOMATIC defrosting Danfoss INVERTER Technology LED Lighting FREEZER technical details: Length (inner/outer): 2300/2500 mm Depth (inside / outside): 720/850 mm Height (front/external access): 770/830 mm Volume (net): 850 litres Power consumption (at 25°C) 5.9 kW/24h Power: 450/500 W Refrigerant: R290A Each product Miami 250 AHT tested but not cleaned and refurbished.

Description: AHT MIAMI FREEZER 185 Model: MIAMI 185 R290 gas Temperature range: -18°C to -25°C / 0C° to +2C° depending on the desired type AUTOMATIC defrosting Danfoss INVERTER Technology LED Lighting FREEZER technical details: Length (inner/outer): 1770/1850 mm Depth (inside / outside): 830/990 mm Height (front/external access): 770/830 mm Volume (net): 650 litres Power consumption (at 25°C) 5.9 kW/24h Power: 450/500 W Refrigerant: R290A Each product Miami is tested but NOT REFURBISHED

- Drilling capacity in St 60, 30 mm - Short spindle MK 3 - Spindle stroke 120 mm - Projection 293 mm - Table support 420 x 300 mm, 2 T-slots - Machined base plate 320 x 329 mm, 2 T-slots - Distance base plate - drill chuck 1000 mm - Feed via turnstile - Weight 220 kg - Spindle speed 160 - 2250 rpm. - Operating voltage 380V-50Hz - Infinitely variable speed adjustment, by means of an adjustment lever - Engine speed in 2 stages, 700/1435 rpm - Tapping device with rotation direction change after reaching the end stops - Coolant device fully installed. - Coolant tank in machine base - Work light with LED - RÖHM drill chuck 1 - 16 mm - Precision machine vice new (test winner)

Used shaking incubator, New Brunswick Scientific Innova 4300, serial no: 20104564, MFG no.: M1193-0002 The New Brunswick Scientific Innova 4300 Large Capacity Incubator Shaker is designed for handling greater quantities of flasks. It easily holds (12) 2 L flasks and accepts flasks up to 6 L. The Innova 4300 shaker incorporates a triple eccentric counterbalanced drive to provide horizontal plane rotary motion in a 1 in. (25.4 mm) circular orbit. A Proportional/Integral (PI) Microprocessor controller with instantaneous digital feedback controls the speed over a range of 25-500 RPM. It also provides temperature control over a range of 5°C above ambient to 60°C. The internal chamber is 34¾ inches (88.3 cm) wide, 22¼ inches (56.6 cm) deep, 19¼ inches (48.9 cm) above the platform and will accept flasks up to 6 liters. It is equipped with a foot-pedal lid lift. The shaker may be opera ...

Inv. Num. : 7253 Type: MSF 9001.25Lr T500 Producer: Microstep Created: 2015, GO 2022 Parameters: Laser power: 10 kW Work table length: 9000 mm Work table width: 2500 mm Maximum sheet thickness when cutting (stainless steel): 25 mm Source: nLight CORONA-CFX-10000 Positioning speed: 130 m/min Laser head: Thermacut EX-TRABEAM-Pro-360 Machine height: 2570 mm Machine length: 23000 mm Machine width: 6000 mm Equipment: Technical Documentation Point Laser Sight Camera in the head Protective glass against lens contamination Remote support Adaptive Cutting Automatic alignment of sheet rotation LED Control Panel Automatic nozzle cleaning Calibration station Pallet Table Changer 2 Tables Intake segments under the grate 1x socket Automatic chip conveyor Automatic suction 2x Asper Licenses

Key data: 46 °, 3200 mm, 1000 mm

sliding table saw Altendorf F45 ELMO III Electromotive height and swivel adjustment Saw blade swivel + 46° to - 46° On-screen control with 12" touchscreen Double trolley 3200 mm Motor 5.5 kW VARIO infinitely variable speed control 2000 - 6000 rpm Saw blade diameter max. 500 mm Cutting height max. 175 mm Cutting width at rip fence 1000 mm Control panel at eye level with document holder 2-axis scoring unit with electric. Height and side adjustment Scoring blade height programmable with quick lowering & Quick lift, motor 0.75 kW, 8200 rpm. LED illumination when the scoring machine is switched on Table extension 840 mm Angle stop with manual adjustment, lengths up to 3500 mm Angle adjustment 0-49° Duplex stop 1350 mm

Takeuchi TB 280 FR Year of construction: 2016 Hours: +/- 6,000 Sale with backhoe bucket - Diesel particulate filter - Beka Max central lubrication system - 8 LED work lights - ENOCON quick coupler Volvo S 45 - 03/21 The particulate filter has been renewed at 4200 hours - 02/23 The chassis chain on the left has been renewed 5578 hours - The excavator is annually UVV inspected - Service every 500 hours with change of all filters

Mazak OPTIPLEX 3015 NEO 10kW Beam Shape Laser Cutting Machine + Automation Loading and Unloading System with 8 Regall Bearing Locations CST3015 Publisher: Mazak Type: OPTIPLEX 3015 NEO 10kW Beam Shape Year of construction: 11/2022 Commissioning: 05/2013 Condition: New, Exhibition Machine Availability: Immediately, by arrangement Operating hours (as of 01.2024): – CNC Power On Time approx. 636h – Laser Power On Time approx. 287h – Auto Operation Time approx. 60h – Auto Cutting Time approx. 19h – Cutting time approx. 17h Scope of delivery complete incl. installation and commissioning (Mazak Germany): – Basic machine with laser resonator Beam Shape CFX-10000 (10kW) – Built-in nozzle camera – Conveyor belt for material scrap – Zus. Laser protection screen (side 1) – Zus. Laser protection screen (side 2) – Oil mist mist – Roller lift table (ma ...

Planetary Stirrer Mixer Model: Rego PM 100 E Power Adjustment-Infinitely Variable LED control with timer 1 stainless steel boiler 100 liters 1 broom, 1 flat stirrer electric boiler lift Floor-standing machine Connection 400V, 5.5 kW, 16A-CEE plug Used machine from bakery

Kneading Machine Spiral Kneader Dough Machine Model: SM 200 A sophisticated technology ... Proven many times over! LED Control with Manual Control 2 speeds + 1x boiler counter-rotation; 3 timers Doughs from 15 to 200 kg / 10-120 kg flour Flour dust hood Stainless steel boiler and spiral Floor-standing machine with 2 tank cars can be extended Connection 400V, 13.5 kW, 63A-CEE plug Used machine from bakery

EMS-95 single-screw extruder, screw diameter 90mm, throughput approx. 200 kg/h (depending on profile size and material may vary). The output width is about 127 cm. Initially purchased for the production of diffusers of all kinds (transparent, partially transparent) for office LED lighting fixtures. Installed in 2012, produced about 1.500 diffusers and has not been used since then

This combi steamer from the manufacturer Rational is a CombiMaster® Plus with 20 x 2/1 Gastronorm inserts in electric design. The combi steamer is the XXL version and offers space for 20x 2/1GN or 40x 1/1GN The device has been tested in our in-house workshop and is fully functional. Availability from week 8 The RRP. for this combi steamer is € 27,110 net. The price quoted is net plus 19% VAT. Service: We would be happy to put you in touch with a certified Rational customer service throughout Germany Are you looking for a specific type of Rational device? Ask us, we have access to an extensive range of used and new goods. We will be happy to advise you on all types of devices, whether SCC, CM, CMP, VCC, iVario, iCombi Classic and Pro. This device is the optimal choice if you are looking for a classic combi steamer that you want to operate manually. Our used equipment se ...

Little used 3D scanner with lots of accessories for sale., Accessories for the scanner:, Transport case, 3 lenses COMET LED 2 100mm, 200mm, 400mm with quality certificate + calibration certificate, 2 pieces of calibration plates for the lenses, Tripod original Zeiss, Laptop suitable for COMET L3 (Intel Core I5 / 8GB Ram) / scanning software, automatic rotary table (Ø460mm), Declaration of Conformity, Training Guide

CNC turning center with 6-axis Mitsubishi robot arm (robot cell) - Machine can be tested under power Specifications: Manufacturer: Mazak Model: QTG-50 SG Control: Mitsubishi M80 Year of construction: 2019 Properties: oscillation diameter: 470 mm oscillation diameter over Feed size: 100-135 mm rod diameter: 32 mm workpiece weight for shaft parts: 20 kg workpiece weight incl. chuck with suitable clamping force and stiffness of the feed: 20Kg Distance spindle nose - tool holder slide 105 to 340mm Main spindle: speed 7,000 min-¹ Min. speed 35 min-¹ Gearbox gradation Continuously variable Spindle nose H6 flat, 115 mm diameter. spindle passage 45 mm 30 min. rated power 7.5 kW B3lphazt0t TOOL REST: Tool rest type Tool holder slide Number of tools: 6 Tool dimensions (turning tool): 16x16mm Tool dimensions (drilling tool): 20 mm diameter Feed axles Rapid tr ...

Holomonitor 600 M3 Tracking System Measurement technique: single wavelength transmission digital holographic microscopy Image types: intensity and quantitative phase contrast image (DH mode) phase contrast image (PC mode) Light source: monochromatic laser source (DH mode) Luxeon 1 watt LED (PC mode) Sample stage: manual or automated XY stage up to 150 mm × 120 mm travel range automated Z stage up to 20mm travel range Camera 1280 × 1024 pixels, 8 or 10 bits (hologram) 2048 × 1536 pixels, 8 bit RGB (phase contrast) Available objectives: standard objectives 10-100x Objective mounting: 4-position objective turret with manual or automated function Computer: PC workstation with latest Intel processor. Software: Holostudio™ imaging and cell analyze software Performance Lateral resolution: objective dependent, down to 500 nm 100x objective Field of view: objective depen ...

Description: Sigma 2-5 Centrifuge. Condition: Good. Characteristics: Centrifugation speeds of up to 3900 rpm. A wide choice of reduction inlets and multiple holders for a variety of different tubes allow universal use. Simple 2 button preselection of speed / RCF and time. Short operation with display in cycle of seconds. Electronically regulated times of up to 30 minutes or continuous operation can be selected. Efficient electric brake for short deceleration and gradual stop for sensitive sedimentations. A double cover closing and locking mechanism in accordance with German accidentprevention regulations (VBG 7z). An LED indicator signals the stop of the rotor and the opening of the cover. Indication of speed / RCF and time. Product complies with national and international safety regulations (IEC 1010, CE).

The kit includes: 1) 2-station steel strip 2) Base for Microsart® @ filter 250 funnels 3) Fluid diaphragm pump - Liquiport 4) Silicone hose for pump 2-STATION FILTRATION APPARATUS Producer: SARTORIUS Catalog number: A / 447 / S / 2.01 Year of production / purchase: 2017 Current condition: new, unused PERISTALTIC PUMP Producer: KNF FLODOS AG Catalog number: E / 458 / O / 2.01 Year of production / purchase: 2017 Current condition: practically unused (like new) Description: The pump is used for pumping neutral and aggressive media. The parts in contact with the medium are made of chemical-resistant materials: PP pump head, PTFE-coated diaphragms, FFPM valves. Pressing power adjustable by a knob with LED indication (range 10-100%). Self-priming. They do not require maintenance. The offered equipment was purchased in an accredited laboratory, which was closed and due t ...

Description: Ventilated benchtop centrifuge Mega Star 600, brand VWR Condition: Excellent, Year of purchase: End 2018. Price Characteristics: Benchtop centrifuge ideal for a wide range of applications such as the research in the pharmaceutical and biotechnology industry and research university. Auto-Lock 3 rotor locking system: Rotor change without tools at the touch of a button; users can quickly change the rotors and easy access to the rotor chamber for cleaning. ClickSeal aerosol-tight bucket sealing system: user-friendly one-handed gloved opening/closing, no need for screw caps or complex clips. SMARTSpin technology optimises acceleration, residual braking and residual load imbalance for maximum safety, regular analysis and reproducible separations. The pulse function saves time for short analyses. Intuitive controls and a large, bright LED display make operation easy. and  ...

Fuchs MHL 340 material handler, Year of construction: 2011, Opera. hrs: approx. 19,000 hrs., OPERATING WEIGHT WITHOUT ATTACHMENTS, MHL340 28.6-29.8 t, DIESEL ENGINE: Deutz/6-cylinder, Engine power 128 kW, ELECTRICAL SYSTEM, Alternator: 28V/100A, Operating voltage: 24V Battery 2 × 12V / 110Ah / 750A, (according to EN), Lighting system: 2 × LED headlamps, turn indicators and tail, lights, Optional equipment: 11kW or 13 kW DC generator with, controls insulation monitoring, Good used condition. Available: immediately, Year of construction: 2011, Opera. hrs: approx. 19,000 hrs., DIESEL ENGINE: Deutz/6-cylinder, alternator: 28V/100A, Good used condition. Available: immediately

: gebraucht : 2019 : 5538 : prompt, Zwischenverkauf v : Taiwan : 47800 € : 1 : 630 mm : 1000 x 400 mm : 1000 mm : 1000 x 400 mm : 1050 mm : 11000 mm : 5 - 25 m/min : 0 - 2250 mm/min : 0,001 mm : 405 mm : 0,001 - 0,04 mm : 675 mm/min : 0.001 mm : 1450 1/min : 3,7 kW : 1.5 kW : 1 kW : 5,6 kW : 4280 mm : 1730 mm : 2080 mm : 3500 kg : 423 kg : 670 kg : 355 x 50 x 127 mm 8", grafic NC-control on swiveling arm with touch screen for: - seletion of working mode, program creation, graphic condition control, alarm list Aut. vertical feed Servo drive for grinding wheel feed and table cross feed Hardened slide ways in all 3 axes with roller bearings Grinding wheel spindle on 4 high precision angular contact bearings Electro-magnetic chuck Coolant equiptment with aut. paper filter and magnetic separator Over the wheel automatic dressing device with automatic compensation Grinding wheel Grinding ...

Description: KAESER TB 19 Cycling Refrigerated Air Dryer flow rate (m3/min): 2,10 pressure loss, refrigeration dryer (bar): 0,19 elect. power consumption at 100% flow rate (kW): 0,43 elect. power consumption at 50% flow rate (kW): 0,24 compressed air connection (G): 1 condensate drain connection (G): 1⁄4 electrical supply : 230 V/1 Ph/50 Hz Other features : Floating contacts: refrigerant compressor running, high pressure dew point The Kaeser cycling control provides maximum efficiency by operating the refrigerant compressor only when necessary. This is achieved by utilizing a thermal storage medium. The refrigerant system cools the medium to a certain temperature, cuts off and then stands by until the temperature rises to a predetermined level before switching on again. Therefore, the dryer is not wasting energy when the demand is low. A non-cycling dryer continuous to op ...

: neu : ca. 6 Monate ab Auftragse : Taiwan : 120620 € : 2400.34 € : 600 mm : 1.000 x 400 mm : 1015 mm : 1.000 x 400 mm : 100 mm : 5 - 25 m/min : 0 - 3000 mm/min : 0,001 mm : 450 mm : 440 mm : 0 - 3000 mm/min : 0.001 mm : 500 - 1800 1/min : 11 kW : 2.2 kW : 1.1 kW : 1.1 kW : 4450 mm : 2655 mm : 2080 mm : 4200 kg : 250 kg : 470 kg : 355 x 50 x 127 mm : 0,005 mm : 0,003 mm Smart i control with 10.4", touchscreen on a swiveling panel, with electronic wired handwheel - RS232, USB I/O connection - SMART Grind Cam (dxf transfer in G code) -PC based control with graphical dialog programming or G-code programming Infinitely variable speed Surface grinding cycle, cross grinding cycle, plunge grinding cycle, multiple groove grinding cycle, contour grinding cycle, dressing cycle Spindle with 4 angular contact ball bearings (P4, checkout 7) Longitudinal guides with double V shape, with Turcit ...