We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
119,252 used machines on RESALE, but how to find them? Machine Search
maximum number of results exceeded > 1000
please refine your search
used
Mazak Integrex i-200 5 axis cnc lathe Machine is in good working condition Bar feeder is included 0,001 accuracy
used
Copy lathe Brand: Röhrsdorfer model: 83 199 Year of construction: 1987 Workpiece length 100 - 460 mm Kantel dimensions: 20 x 60 mm Equipment: Workpiece magazine Turning knives Template-controlled rotary blade knife, 3x
used
DMC DL 8T 2 axis cnc lathe Fanuc control unit Swing over Bed(Max. wing dia.): 480 mm Max. Turning Dia.: 280 mm Machine is in excellent condition
used
DE BERNARDI lathe with Fanuc control. Used but still working well. Some technical data follows: Turning length 1500 Bar passage 100 The bar goes in for about 70
used
Universal Lathe Binns & Berry Trident L1000 Conventional + DRO Acu-Rite digital readout Turning diameter over bed 1000 mm Turning diameter over saddle 850 mm Turning length max. 2500 mm Turning diameter in gap 1500 mm Travels X1 500 mm Cross slide X2 300 mm Top slide Rapid traverses X 3000 mm/min. Z 4500 mm/min. Spindle bore 104 mm Spindle speeds 0~1250rpm Spindle drive motor rating 23 KW Motor rpm inverter operated 2 Steady rests Steady rest diameter 315 mm with roller bearings Steady rest diameter 550 mm with roller bearings 2 x 4-jaw chuck diameter 1350 mm / 750 mm Coolant pump Weight approx. 6000 kg Proposal Number L-4813
used
Dear customers, currently we offer a used lathe, for processing wood, metal and plastic, of the brand Zimmermann for sale. Here are some technical data of the machine: Turning length: 1,500 mm Tip height above bed: 300 mm Tip height above support: 160 mm Adjustment travel cross support: 1,500 mm Adjustment travel plan support: 260 mm Adjustable travel upper support: 260 mm Main spindle power: 2.2 kW Speed: 375 - 2,700 rpm Dimensions: 2,600 x 900 x 1,200 mm Weight: 650 kg If you have any further questions, please do not hesitate to contact us. to your inquiries.
used
Emco Turn 425 MC CNC Lathe 2 bar feeder 2 turret 4 spindle Machine is in good working condition
used
Takisawa TS-3000 YS 5 axis cnc lathe Machine is in excellent condition
used
Doosan Puma 280M CNC Lathe C axis Machine is in good working condition
used
Mazak Quick Turn Nexus 150 CNC Lathe Machine is in very good condition 8 inches Length : 500 mm Turning Diameter : 300 mm
used
Mazak Multiplex 6100Y CNC Lathe Maximum Machining Diameter 230 mm / 9.060 in Maximum Machining Length 170 mm / 6.690 in https://www.mazak.sg/machines/multiplex-6100y/
used
3-jaw wedge bars lathe chuck FORKARDT TYPE F+160 No. 1659 181 identical Forkardt F315 or SMW diameter: 160 mm Inner diameter: 45 mm Chuck flange: short cone DIN 55022 Size 6 1 set of feed jaws consisting of basic jaws and hard attachment step jaws for turning 1 set of feed jaws consisting of basic jaws and soft attachment step jaws for turning - central adjustment Weight: 11 kg good condition; used
used
Samsung SMEC SL 2500Y CNC Lathe C and Y axis 10 inches 6 pieces axial live tools 2 pieces radial live tools BMT 65 turret Fanuc control unit Chip conveyor Machine is in excellent condition
used
Haas ST 30 CNC Lathe Chuck size : 254 mm Maximum Turning Diameter : 533 mm
used
Mazak Integrex 400Y 5 axis cnc lathe 12 inch chuck Turning length : 1500 mm Capto C6 holder Conveyor Machine can be seen in working condition
used
Doosan PUMA 280LM CNC lathe with C axis Length . 1050 mm Chuck size : 12 inch 5 live tools(4 horizontal + 1 vertical) Machine is in good working condition
used
Schutte 26 SF-DNT Multispindle Lathe (6 Spindles) It is in working condition
used
Smec SL 2000M CNC Lathe with c axis Machine is like new condition Machine has been used only 4 months Fanuc control unit
used
Index MS 18C Multispindle automatic lathe Double NCU SIR25 IEMCA bar feeder Machine can be seen in working condition
used
Takisawa EX-110 Cnc lathe Working hour : 8949(November 2023) 10 inch chuck Fanuc control unit Machine is in very good condition
used
Okuma LB35 II CNC Lathe Maximum turning length: 2000 mm Maximum turning diameter : 600 mm 18 inches chuck(SMW) IGF program Machine is in very good condition Turret VDI50 holder Some tools will be given together with the machine All maintenance has been done
used
Cnc-Takang Lathe Fanuc control unit 2008 8 inches Swing over Bed à 460 mm (18.1) Swing over cross slide à 280 mm (11)
used
Mazak Integrex 200SY 5 axis cnc lathe Mazatrol Fusion 640 MT control unit Turning diameter : 540 mm Turning length: 1000 mm Tool measuring probe ATC 80 Many tools are included
used
Haas ST 30 CNC Lathe Chuck Size : 254 mm Maximum Part Swing : 533 mm Haas Control Unit
used
Hyundai WIA KIT 4500 CNC Lathe Machine has been installed in December 2019 and used 1.5 years Machine is like new condition Original conveyor Rapid Traverse Rate (X/Z axis) 30/36 m/min (1,181/1,417 ipm) Travel (X/Z axis) 450/300 mm (17.7â³/11.8â³) Max. Turning Dia. Ã165 (Ã6.5â³) Max. Turning Length 300 mm (11.8â³)
used
Mazak Quick Turn Smart 200M L Cnc Lathe Machine is in good working condition Maximum swing 660 mm Maximum machining diameter 350 mm
used
DAEWOO PUMA 8S cnc lathe the machine is of USA origin therefore 220 three-phase it was tested after unloading for 5 years, with a transformer that I no longer own, it was working, new spindle never installed
used
Daewoo Puma 15 2-axis lathe (700x1500) Self-centering is an autoblock dia. 500
used
Mazak Integrex 50 CNC Lathe Turning length : 2500 mm Turning diameter : 710 mm
used
Mazak Quick Turn Smart 200 Cnc Lathe Machine is in good working condition Maximum swing 660 mm Maximum machining diameter 350 mm
used
Samsung PL30L CNC Lathe Machine is in good working condition Turning diameter : 650 Turing length : 1050mm
used
CNC lathe Manufacturer: Mazak Model: QT Nexus 200-II M Year: 2008 CNC: Mazak Mazatrol Matrix Nexus
used
Samsung Smec PL 35 CNC Lathe Turning Dia : 419 mm Fanuc control Machine is in good working condition
used
Cincom L32 VII MCL2032/1633 automatic lathe. The current state of the machine - complete machine. It worked until it was turned off. It has a transfer and security sensor, so you will probably need to contact the manufacturer. Data: Full load current 29A Interrupt Capacity 2.5/2kA Input Voltage AC200V 3 50/60Hz Rated Power 10kVA Weight 2750 kg
used
Doosan Puma 400L CNC Lathe 15 inch chuck Machine has been purchased December 2013 Max Turning Dia: 560 mm
used
Accuway UT-300L CNC Lathe Maximum turning diameter : 500 mm Maximum turning length : 1200 mm
used
Biglia brand CNC lathe mod. B501 year 1999, FANUC 18i-T control, 12 position turret and tailstock + ASMUT bar feeder mod. AB8/7/65. Accessories: Mario Pinto chuck dn.250 mm. with 22 sets of clamps, Bellegrandi plier holder with 13 pliers of various sizes, n°12 tool holders and various accessories For sale due to cessation of activity
used
Doosan Puma MX 2500 S cnc lathe 7 axis Tools are on machine Machine is in very good condition
used
DMG CTX 310 eco CNC Lathe with C axes Working hours: 50110-24500 Control Unit : SIEMENS Model 810D z ShopTurn Chip conveyor Live tools are included Hydraulic chuck All maintenance has been done DMG All documents are available
used
Maier MLK 125L Swiss type lathe Minimag bar feeder Machine is in very good condition
used
Hanwha XE26 Swiss Type Lathe Max diameter : 26 mm Number of axis : 5 Max. length : 250 mm Fanuc control unit Live tools are included Speed head 1 piece fixed tool 2 deep hole boring tool
used
Maier MLK 32 D Proline Swiss Type CNC Lathe Bar feeder is included Chip conveyor is included Machine is in good working condition
used
Schütte SE25 Multispindle automatic lathe Make a request for more information
used
maximum turning diameter over the slide: 320 mm handle diameter: 315 mm spindle passage: 63 mm spindle speed range: 45-1400 rpm. main drive motor power: 22 KW machine dimensions (length x width x height): 2900x1800x1900 mm weight of the lathe: approx. 5000 kg
used
The Okuma Genos LVT300M CNC lathe shown in the picture is for sale. The machine is currently in production! It can be viewed during operation. Main parameters: -Control:OSP100 -Hydraulic chuck -Hydraulic saddle -Maximum swing: 300mm -Maximum length: 200mm -Spindle diameter: 40mm -Turret: 12
used
Lathe Manufacturer: Meusser & Co. - Frankfurt am Main
used
Lathe Manufacturer: Meusser & Co. Frankfurt am Main
used
Vertical Lathe Double Column TOS SK16 Maxi turning diameter: 1700 mm Turning height: 1250 mm Rotation: from 3,55 to 150 RPM 4-jaws chuck Ø 1620 mm Chuck crossing diameter: Ø 1620 mm Max workpiece weight: 5000 kg Left vertical slide rame stroke: 900 mm Right Vertical slide ram stroke: 600 mm (turret 5 tools) Right Horizontal slide ram stroke: 500 mm Power: 12 kW Voltage: 380 V Length: 4600 mm Width: 2800 mm (without chuck protectors) Total height in low position: 3800 mm Weight: approx 20 T
used
Dorries Model SD250 Vertical Boring Mill/ Turret Lathe Year: 1978 Flush Floor Diameter of 4-jaw chuck: 98.5"/ 2501 MM Maximum swing, side head down: 110"/ 2794 MM Height under rail: 85"/ 2159 MM Table Load Capacity: 110,000 Lbs Cross travel of ram head: 61" Vertical travel of ram head: 42" Maximum Capacity Under Tool: 70" Side head: none Table speeds: 112 RPM Variable Main drive motor: 75 HP Current Electrical Arrangement: 480/3/60 ¯ Complete With: 98" 4 Jaw Chuck (1) Swiveling Ram Head (1) 5 Position Swiveling Turret Head Full Pendant with digital readout Baldor Variable Drive Coolant Tank Flush Floor Threading Video Available
used
Turning diameter: 450 mm Turning length: 900 mm Turret positions: 12 CNC Brand: Siemens CNC Lathe with c-axisSPINNER - TC 800 MC Max. turning Ø: 450mm X-Axis: 360mm Z-Axis: 900mm Spindle bore: 110mm Speedrange: 2600Rpm ATC / revolver: 12 Speed live tools:4500Rpm Chip conveyor: Yes Tool eye: Yes Length: 4700mm Width: 2000mm Height: 2200mm Weight: 7500kg