lathe drive tool used for sale

250 X 155mm aperture. 190mm conveyor width. Air reject system. 1030mm Line height. Left to right production direction. M & S Spec.

Servo Driven Labeller Mfc.: Gernep Built: 2017 Overhauled in 2020 2 cold glue stations for back and front + neck label 1 format for Steinie 3 formats long neck and Appo 33 cl back - front - neck (1 format)

• Load capacity 125 kg • Drum holder for drums appr. diam. 430 mm, drum weight max. 100 kg • Lifting height of drum lower edge above floor max. appr. 1,400 mm • Two-speed remote control (50 % and 100 %) • Central brake bar • Mobile • Electrically rechargeable with battery charger 230V/50Hz

Gear motor, electric motor, electric gear motor -Manufacturer: Watt Drive, gear motor type HG OKG 71N4 -Speed: 246 rpm -Power: 0.37kw -Torque: 14.4 Nm -Shaft: Ø 20 x 40 mm -Protection class: IP55 -Dimensions: 400/170/H210 mm -Weight: 15kg

DC motor, servo motor, gear motor, electric motor, DC gear motor, DC shunt gear motor -Manufacturer: Kählig, DC gear motor -Speed: 146 -Voltage: 160 V -Power: 300 W / 3000 rpm -technical data: see photo type plate -Shaft: Ø 16 x 27 mm -Dimensions: 320/120/H155mm -Weight: 10 kg

servo motor, DC motor, servo gear motor, servo actuator, drive actuator, servo drive -Manufacturer: HD Harmonic Drive, Hi-T Drive SERVO ACTUATOR -Type: RH-8-3006-T-SP -Shaft: Ø 18 x 20 mm -Dimensions: 200/60/H65 mm -Weight: 1.0 kg

gear motor, electric motor, electric gear motor -Manufacturer: Watt Drive, gear motor type SUA 506B IA 81N4 -Speed: 13.7 rpm -Engine: Type WAF81N4 0.75 kW -Shaft: Ø 30 x 125 mm -Protection class: IP55 -Dimensions: 480/210/H240 mm -Weight: 37 kg

power capacity: kW volt: V ampere: A total power requirement: kW weight of the machine ca.: 84 kg dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

TPG Hypoid Gearmotor FV35-750-30 0.75kw, Ratio: 30, Shaft: 35mm

Maxi Maestro D.C Servo Drive 200 x 25/50

Hydraulically powered submersible wastewater pump for mounting on a crane, shovel, or enrichment device using a mandrel., Includes hydraulic lines and a discharge pipe for the suctioned water. The SP46 ATEX is a professional 4 wastewater pump, designed for pumping dirty or highly contaminated liquids with a sludge concentration of up to 20%. Its performance is very high: a flow rate of up to 3000 l/min and a water head of up to 16 meters. The pump housing is made of stainless steel with polyurethane-polyether shielding plates, materials that provide unparalleled strength, wear resistance, impact resistance, and corrosion resistance. The hydraulic operation guarantees implicit safety as it prevents electric shocks. The pump can run dry indefinitely without damage., , Motor type: gears group 2, Oil flow: 30 - 40 l/min, Ideal flow: 38 l/min, Oil pressure: 140 - 210 bar, Back pressure: 17 ba ...

The Hycon HWP4 is a 4-inch hydraulic submersible pump for waste water, , designed for large-scale dewatering in heavy-duty applications such as groundwater lowering and dirty water with large solids., Includes extension boom for mounting in the machine., , Key Specifications, Capacity: Up to 120 m³/hour., , Hydraulic requirements: Oil supply 30-40 l/min at 120-150 bar working pressure; max. 172 bar., Max. delivery head: 22 m; solids up to ø74 mm through vortex impeller., Weight: 26.7 kg; dry-running resistant thanks to direct hydraulic drive., , Features and Benefits, No electrical cables required; can be connected to power packs, excavators or tractors for versatile use., , 4-inch BSP connection, , Throughput capacity: 120 m3/h, Max dirt passage: 74 mm, Max. head: 22 MWK, Weight: 27 kg, , = More information =, , Year of manufacture: 2021, Empty weight: 28 kg, Connector size: 4 inch, , ...

The drill drive (drill head) and flushing pipes have a 3-inch (75 mm) passage for easy installation of 50/60 mm filters and gravel filling. , , The rotation of the flushing pipes is driven by a hydraulic motor, with hose couplings connected to a hydraulic system. In addition, the SB 1 flushing drill drive can be operated in such a way that the rotation and opening/closing of the spade valve is controlled hydraulically., For installing drainage/wellpoint filters and pouring gravel (optional)., Weight (kg): 175 (without lance), , Hydraulic motor: CCM160, RPM 170@100L, Flow: 100 (max 125) l/min, Working pressure: 200 (max. 240) BAR, Oil bath: 8 liters, Gear ratio: 3.09:1, Suitable for flushing pipe: 3 inches (75 mm) 4-8 meters long, Lances/flushing pipes included: , ø80 mm, length 387 cm, ø100 mm, length 520 cm, , = More information =, , Year of manufacture: 2024, Empty weight: 160 kg, Te ...

Key data: 4 KW

The Nord SK 112M/8-2 BRE 40 TF is a pole-switchable three-phase asynchronous motor from NORD DRIVESYSTEMS. Technical details Motor type: Pole-switchable motor for two fixed speeds. Number of poles: 8/2-pin (low/high speed). Power: Typically approx. 4.0 kW at high speed (reference value for 112M size). Brake (BRE40): Equipped with a spring-applied brake and a braking torque of 40 Nm. Motor Protection (TF): Integrated thermistor (PTS) to monitor winding temperature. Additional options (WUTFZ): Customer-specific winding or fan modifications (often for operation on frequency converters or special cooling types). UNUSED

160 kw. a.c.drive, brand A.E.G., year 1995,, professionally reconditioned

1.0 PCS screw compressor system consisting of the The following components: 1.0 pcs Screw Compressor, Manufacturer: Almig, Type: Belt Drive 15 , Year of manufacture: 2013, Operating pressure: 10 bar, power 15 KW 1.0 pcs. Compressed air dryer Manufacturer: Prematic 1.0 pcs pressure vessel 1.0 Sr. Oil Separator

Lift lifter, Expresso, Lift&Drive 85 – used - : Special price for pick-up by Friday, 30.1.2026! Prices from location: 950.-€ (net) Manufacturer: Expresso Type: Lift&Drive 85 Year of manufacture: unknown Load capacity: 70kg Charging voltage: 230V, 50Hz Battery voltage: 18V/AH Rating: good Available: immediately Location: Waltrop

General SKU040G131 MakeFlender Drives & Automation TypeFZA F88B-K4 (132) No.8718825/1 Year of construction2007, Drive unit has never been used LocationBarneveld Main Features MaterialStainless steel Motor5.5 KW Specified Features - Stirrer StirrerDrive unit for reactor/stirring vessel (1x) Flange-stirrer(flange ± dia. 440mm) Without mixing shaftcheck Motor5,5 KW, 400/690 Volt (Ex) Speed mixing shaft± 187 Rpm With mechanical sealcheck Information Floorspace0,6x0,5 M Total height1,7 M Weight450 KGStirrersFlender DrivesMixers > StirrersBrand > Flender Drives What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

Motor spindle, milling spindle, motor spindle, AC spindle motor, electric motor, DC motor, servo motor, milling motor -Application: Milling/Drilling -Motor spindle: was tested on a robot -Operating hours: 4350 hours -Motor spindle: 55 kW -Servo inverter: Lenze Servo Drives 9400 -Recording: HSK32 -hydraulic tool clamping OTT Type: 95.102.779.0.2 V01 -Spindle cooling BKW type: WRK07/PC41 -Control cable -Dimensions of control cabinet: 1118/800/H2430 mm -Weight: 694 kg

Control cards for lamp-pumped lasers, marking lasers, control cards, input cards, controls -Manufacturer: SLS Spectron Laser Systems -Control comes from a marking laser -Type: Handling Gretag Laser 6211 -Control is sold untested from stock, so as a spare parts carrier -Dimensions: 482/400/H88 mm -Weight: 5 kg

Control cards for lamp-pumped lasers, marking lasers, control cards, input cards, controls -Manufacturer: SLS Spectron Laser Systems -Control comes from a marking laser -Type: Handling Gretag Laser 6211 -Control is sold untested from stock, so as a spare parts carrier -1x card type: Gretac SPT 68.12.00 -1x card type: Gretac GPR 68.11.90 -1x card type: Gretac SIP 68.11.87 -1x card type: Gretac IOF I 68.11.96 -1x card type: II 34.74.11 -1x card type: Gretac GSP 68.12.24 -1x card type: Gretac ASP 68.12.36 -1x card type: Gretac GHD 68.12.28 -1x card type: Gretac HSP 68.12.32 -1x card type: Gretac CKB 68.12.48 -1x: Positive Switching Regulator PSR 128E -1x: Positive Switching Regulator PSR 510E -Dimensions: 482/400/H620 mm -Weight: 29 kg

Servo drive, control unit, converter, frequency converter, frequency inverter, drive inverter, compact inverter, drive control unit, control unit -Manufacturer: Reis Robotics, servo controller, motor control unit -Type: Drive 4025 AT -Number: 2x servo controllers available -Price: per piece -Dimensions: 350/155/220 mm -Weight: 6.3 kg/pc.

Gearboxes, spur gears, bevel gears, transmission gears, crane gears, hoist gears, grab lifting and closing gears -Manufacturer: PIV Drives, gearbox type D-315-22H -Translation: 34.726 :1 -Motor: without electric motor (can be supplied at extra cost) -Input- shaft: Ø 60 x 140 mm -Output hollow shaft: Ø 160 x 500 mm -Dimensions: 720/1300/H725 mm -Weight: 1321 kg

Servo drive, control unit, converter, frequency converter, frequency inverter, drive inverter, compact inverter, drive control unit, control unit -Manufacturer: Reis Robotics, servo controller, motor control unit -Type: Drive 4009 AT -Number: 2x servo controllers available -Price: per piece -Dimensions: 315/85/220 mm -Weight: 3.6 kg/pc.

CNC frame processing machine Brand: COMEC DRIVER New machine - With this machine you can process assembled door frames in quantity-1, door by door. - 5-axis machining spindle with ingenious crosshead technology for fastest tool use and productivity. Automatische Positionierung der Auflagensupporte. - High-precision and program-controlled clamping system with O-reference on the surface. - Laser measurement of the surface contours for precisely fitting milled fittings. - Automatic discharge of the finished frame parts. - Possibility of connection to known door software systems. - The machine can be individually designed to meet your required machining needs. Give us your requirements and let us offer you your MD JAMB suitable. - This offer is valid for Germany. Wehrmann is the exclusive sales and service partner for COMEC in Germany.

The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

2 horizontal stainless steel pressure tanks, each equipped with outlet pipe, pressure gauge and sight glasses. The tanks come with a saddle frame for installation., Additional title: horizontal stainless steel tanks mounted on scaffolding, Volume: 1050 l, Max. overpressure: 3 bar, Length: 2200 mm, Width: 800 mm, Height: 800 mm, Material: stainless steel, Position: horizontal, Base construction: with scaffolding for installing the tanks one above the other, Features: outlet pipe DN65, pressure gauge, sight glasses

Horizontal stainless steel pressure tanks with cooling jackets, sight glasses, outlet pipes and pressure gauges., Additional title: horizontal, coolable stainless steel pressure tanks, Volume: 1050 l, Max. working overpressure: 3 bar, Length: 2300 mm, Width: 860 mm, Height: 860 mm, Material: stainless steel, Position: horizontal, Features: cooling jacket, outlet pipe DN50, sight glasses, pressure gauge

USED BBA BA110K D193, , Looking for a reliable and powerful water pump?, The BBA BA110K D193 is ready for immediate use!, , ✅ Robust quality, ✅ High capacity, ✅ Reliable performance, ✅ Suitable for professional use, , This water pump is ideal for construction, industry, and water management., Strong, efficient, and built for top performance under tough conditions., , Stock number: 25P0254, , Interested? Call us now for an excellent offer!, Prefer to email? Send us a message and receive a competitive price quickly., , Throughput capacity: 190 m3/h, Max dirt passage: 82 mm, Motor brand: HATZ 1D90Z, Max. head: 22 MWK, Max dirt passage: 1500 rpm, , = More information =, , Year of manufacture: 2024, Applicable material: Water, Empty weight: 1.465 kg, Connector size: 4 inch, Quick coupler system: Yes, Technical condition: good, Visual appearance: good, Price: On request, Please contact ...

USED BBA BA110K D193, , Looking for a reliable and powerful water pump?, The BBA BA110K D193 is ready for immediate use!, , ✅ Robust quality, ✅ High capacity, ✅ Reliable performance, ✅ Suitable for professional use, , This water pump is ideal for construction, industry, and water management., Strong, efficient, and built for top performance under tough conditions., , Stock number: 25P0255, , Interested? Call us now for an excellent offer!, Prefer to email? Send us a message and receive a competitive price quickly., , Throughput capacity: 190 m3/h, Max dirt passage: 82 mm, Motor brand: HATZ 1D90Z, Max. head: 22 MWK, Max dirt passage: 1500 rpm, , = More information =, , Year of manufacture: 2017, Applicable material: Water, Empty weight: 1.465 kg, Connector size: 4 inch, Quick coupler system: Yes, Technical condition: good, Visual appearance: good, Please contact Gert-Jan Kruitbosc ...

USED BBA BA110K D193, , Looking for a reliable and powerful water pump?, The BBA BA110K D193 is ready for immediate use!, , ✅ Robust quality, ✅ High capacity, ✅ Reliable performance, ✅ Suitable for professional use, , This water pump is ideal for construction, industry, and water management., Strong, efficient, and built for top performance under tough conditions., , Stock number: 25P0254, , Interested? Call us now for an excellent offer!, Prefer to email? Send us a message and receive a competitive price quickly., , Throughput capacity: 190 m3/h, Max dirt passage: 82 mm, Motor brand: HATZ 1D90Z, Max. head: 22 MWK, Max dirt passage: 1500 rpm, , = More information =, , Year of manufacture: 2017, Applicable material: Water, Empty weight: 1.465 kg, Connector size: 4 inch, Quick coupler system: Yes, Technical condition: good, Visual appearance: good, Price: On request, Please contact ...

USED BBA BA110K D193, , Looking for a reliable and powerful water pump?, The BBA BA110K D193 is ready for immediate use!, , ✅ Robust quality, ✅ High capacity, ✅ Reliable performance, ✅ Suitable for professional use, , This water pump is ideal for construction, industry, and water management., Strong, efficient, and built for top performance under tough conditions., , Stock number: 25P0254, , Interested? Call us now for an excellent offer!, Prefer to email? Send us a message and receive a competitive price quickly., , Throughput capacity: 190 m3/h, Max dirt passage: 82 mm, Motor brand: HATZ 1D90Z, Max. head: 22 MWK, Max dirt passage: 1500 rpm, , = More information =, , Year of manufacture: 2017, Applicable material: Water, Empty weight: 1.465 kg, Connector size: 4 inch, Quick coupler system: Yes, Technical condition: good, Visual appearance: good, Price: On request, Please contact ...

Driven tool, Driven tool holder for CNC lathe BIGLIAfits 100% on a B 501 YHerder OESTERLE PartnerArt. 310 5521 E32 B109 Year: ca. 2010Serial No. 06 - 12 / 0330Collet holder: ER32- with a collet 18 mmWeight: 7.5 kgvery good conditionsimilar to M.T. ITALY; used

Complete winding drive, rewind drive, D350mm - D650mm, IBD, mint condition -60% Special price We still have several identical and other such devices, but the amount is ending. Buy more than 1 piece, there is still a great discount. If you have a VAT number, we will gladly issue you an invoice without VAT. Top condition like a demonstration unit The part was removed from a new machine that is proven to have run only about 100 hours of operation. Technical data: Complete winding drive, rewind drive D350mm to D650mm consists of: 1) Total 120 x 86 x 120cm high, 350kg 2) Heavy frame with bearing and shaft, IBD 3) Manually adjustable drum support D350 to D650mm x 430mm long 4) SIMOTICS S synchronous motor, 0,82KW, 1FK7042-2AF71-1CH1, Siemens, 5) Hypoid gear, I=500, SPK+100S-MF3-500-0E1-1S11, Wittenstein, 6) Metal bellows coupling BC2-00300AA032-000-032.000 Wittenstein ...

Heavy Duty Drive Wheels - Drive Wheels with Hub Groove Wheel diameter 350 mm Wheel width 100 mm Elastik - Solid rubber on cast iron - Wheel centre Axle diameter 65 mm Hub groove width 18 mm Hub groove height 5 mm Hub length 100 mm Weight 19.4 kg 20 units in stock - new - unused - -Unit price-

Lifting spindle drive Framo - Drive technology 3 units in stock Stroke 1,500 mm Adjustment force 4,000 N Lifting speed 5 mm/s -New- -Unit price- Original price today approx. € 6.300,00 net per piece

Suitable for Yanmar VIO 75 mini excavator/Nabtesco, model MSP 00 2609

Fendt Farmer 106S all-wheel drive tractor • Built in 1979 • 4-cylinder engine, 48 kW • All-wheel drive • Maximum speed 30 km/h • PTO 540 / 1000 rpm • Cabin available Condition: • Restoration object • No blue smoke • Engine running • Gearbox shifts • No MOT • Heavy signs of wear and rust • Seat badly damaged Auction-ID: 04G-U12-1

linear drive, linear gear, lifting gear, spindle drive, linear axis, linear rail, linear guide, electric spindle drive -Manufacturer: Geze, spindle drive type E250/24V-DC EV 1 Ovp -Ident.-No.: 16 473 -Stroke length: 300 mm -Network: 24 V DC -Shaft: Ø 20 mm -Number: 2x linear drive available -Price: per piece -Dimensions box: 670/60/H45 mm -Weight: 1.8 kg/piece

linear drive, linear gear, lifting gear, spindle drive, linear axis, linear rail, linear guide, electric spindle drive, electric linear drive, window drive -Manufacturer: Geze, electric linear drive type E212R/230V-AC Ovp -Ident.-No.: 05428 -Stroke length: 42-66 mm -Network: 230 V DC -Shaft: Ø 20 mm -Number: 1x linear drive available -Dimensions box: 230/100/H50 mm -Weight: 1.0 kg

Driven tool for Mazak Integrex Item description see nameplate. Good condition fully functional can be visited on site and tried out. Shipping abroad. Visit: Basically I would like to point out that the article may be viewed and tested under power to exclude misunderstandings, like before you buy. Please ask questions before you purchase to avoid ambiguity. For general questions or an appointment for a visit I am at the below telephone number, available. Errors in the description and intermediate sale is reserved. Shipping with freight forwarding.

Driven tool for Mazak Integrex Item description see nameplate. Good condition fully functional can be visited on site and tried out. Shipping abroad. Visit: Basically I would like to point out that the article may be viewed and tested under power to exclude misunderstandings, like before you buy. Please ask questions before you purchase to avoid ambiguity. For general questions or an appointment for a visit I am at the below telephone number, available. Errors in the description and intermediate sale is reserved. Shipping with freight forwarding.

Driven tool for Mazak Integrex Item description see nameplate. Good condition fully functional can be visited on site and tried out. Shipping abroad. Visit: Basically I would like to point out that the article may be viewed and tested under power to exclude misunderstandings, like before you buy. Please ask questions before you purchase to avoid ambiguity. For general questions or an appointment for a visit I am at the below telephone number, available. Errors in the description and intermediate sale is reserved. Shipping with freight forwarding.