lathe drive tool used for sale

Heavy Duty Lathe POREBA Model: TCA 160 /12000 Condition: Excellent, ready to work Year of manufacture: 1963 Complete Offer includes a lot of equipment Technical details : Control: Manual High of centrem over the flat way: 800 mm High of centres over the floor: 1 600 mm Swing over carriage: 1 280 mm Diametre of 4-jaws chuck: 1 600 mm Distance between centres: 12 000 mm Load carrying capacity without steady: 30 000 kg Load carrying capacity with 1 steady: 35 000 kg Load carrying capacity with 2 steady: 40 000 kg Equipment: - head for grinding 2 psc. - constant's lunette 3 psc. - mobile lunette: 1 psc. - milling head 1 psc. - carriages 2 psc. - change gear set, etc

LOCATELLI- model BIG-ARIETE- Hi production- automatic copy lathe fully hydraulic cycles and tooling advances: automatic hopper feeds squares or round blanks Station #1...blank is advanced...first trim knife trims to blank to fit thru hollow chuck Station #2...(1) roughing knife follows template...to rough to basic shape Station #3...(1) finishing knife makes the first finish cut Station #4...(1) finishing knife (set slightly deeper) makes finish cut Station #5 & #6 end boring or shaping the outer edge (if needed) Station #7...(1) parting tool ...mills the finished part off the blank finish part drops.head stock advances to scheduled stop ...cycle continues 400+ parts per hour are possible complete with lots of tooling and various size steady rests

ZUCKERMAN CHALLENGER- auto copy lathe and sander, capacity - ( mills 10" dia.by a max. of 120" long) mills using cup cutters- followed by (1) sanding station, unit has hopper feeder, mills & sands one part at a time, does parts like: boat oars, shovel handles, gunstocks, chair legs, ect. Price-$10,900

Reichenbacker copy lathe mills/ turns (6) concentric or non concentric pieces at a time (1) station for your model/sample (models may be wood or metal) complete set up for duck decoys various sizes - items like Queen Ann legs, ect (photos available) (6) milling /working stations

Hemco hydraulic tracing lathe Hopper feed very good condition...$7,900 obo Contact Fred (716) 433 4224 (12:00 noon is best time to call)

Special attachment for lathes gt; for reworking crankshafts - this attachment can be fixed on top of the cross-slide - via a pneumatic cylinder the top part of the attachment can tilt op to allow the crankshaft to be installed in the chuck - once the crankshaft has been installed in the chuck of the lathe the top part can be closed and positioned around the area that needs to be reworked - once activated the tool insert of the attachment will start turning around the crankshaft to remove excess material. The chuck does not have to turn the crankshaft! The advantage of this concept is that the tool moves around the crankshaft - by doing this the least amount of stress is put on the crankshaft. This in contrast to the classic setup where the stationary tool is pressed into a workpiece being turned by the chuck of the lathe. Max dia of crankshaft: 330 mm

Reinbacker- rope turning lathe chuck up your part- twin routers transverse your material as lathe slowly rotates your material several passes give you a straight or tapered spiral like a rope turning or straight or spiral flutes

AUTOMATIC SPINNING LATHE DENN RPE-290 Denn Mod.RPE-290 Automatic Spinning Lathe- Spindle Speeds 615/1060/1825 RPM. More information on request.

Driven Tool, Driven Tool Holder for CNC Lathe BIGLIA fits 100% on a B 501 Y Manufacturer OESTERLE Partner Art.-No. 310 5521 E32 B109 Year of manufacture: approx. 2010 Serial No. 06 - 12 / 0330 Collet holder: ER32 - with a collet 18 mm Weight: 7.5 kg very good condition similar to M.T. ITALY; used

Complete winding drive, rewind drive, D350mm - D650mm, IBD, mint condition -60% Special price We still have several identical and other such devices, but the amount is ending. Buy more than 1 piece, there is still a great discount. If you have a VAT number, we will gladly issue you an invoice without VAT. Top condition like a demonstration unit The part was removed from a new machine that is proven to have run only about 100 hours of operation. Technical data: Complete winding drive, rewind drive D350mm to D650mm consists of: 1) Total 120 x 86 x 120cm high, 350kg 2) Heavy frame with bearing and shaft, IBD 3) Manually adjustable drum support D350 to D650mm x 430mm long 4) SIMOTICS S synchronous motor, 0,82KW, 1FK7042-2AF71-1CH1, Siemens, 5) Hypoid gear, I=500, SPK+100S-MF3-500-0E1-1S11, Wittenstein, 6) Metal bellows coupling BC2-00300AA032-000-032.000 Wittenstein ...

Crane motor, travel drive Crane bridge drive with gearbox Sliding anchor motor, Schuer motor, three-phase electric motor, brake motor, crane motor, wire rope hoist drive, crane drive, hoist motor, fine lift motor Manufacturer: DEMAG Motor Type: 24/10 KF8-2 Motor No.: 982869 Motor Design: B5 Nominal voltage: 380 VAC Nominal frequency: 50 Hz Power level 1: 0.58 kW = 715 rpm. Power level 2: 2.3 kW = 2900 rpm. with gearbox DEMAG type KS 12 reduction gearbox Fabr. No. 1909104 Gear ratio: i = 118 with impeller for crane track 2 pieces available, price indication per piece; used

Driven tool for Mazak Integrex Item description see nameplate. Good condition fully functional can be visited on site and tried out. Shipping abroad. Visit: Basically I would like to point out that the article may be viewed and tested under power to exclude misunderstandings, like before you buy. Please ask questions before you purchase to avoid ambiguity. For general questions or an appointment for a visit I am at the below telephone number, available. Errors in the description and intermediate sale is reserved. Shipping with freight forwarding.

Driven tool for Mazak Integrex Item description see nameplate. Good condition fully functional can be visited on site and tried out. Shipping abroad. Visit: Basically I would like to point out that the article may be viewed and tested under power to exclude misunderstandings, like before you buy. Please ask questions before you purchase to avoid ambiguity. For general questions or an appointment for a visit I am at the below telephone number, available. Errors in the description and intermediate sale is reserved. Shipping with freight forwarding.

Driven tool for Mazak Integrex Item description see nameplate. Good condition fully functional can be visited on site and tried out. Shipping abroad. Visit: Basically I would like to point out that the article may be viewed and tested under power to exclude misunderstandings, like before you buy. Please ask questions before you purchase to avoid ambiguity. For general questions or an appointment for a visit I am at the below telephone number, available. Errors in the description and intermediate sale is reserved. Shipping with freight forwarding.

Driven tool for Mazak Integrex Item description see nameplate. Good condition fully functional can be visited on site and tried out. Shipping abroad. Visit: Basically I would like to point out that the article may be viewed and tested under power to exclude misunderstandings, like before you buy. Please ask questions before you purchase to avoid ambiguity. For general questions or an appointment for a visit I am at the below telephone number, available. Errors in the description and intermediate sale is reserved. Shipping with freight forwarding.

driven tool holder, tool holder EPPINGER Preci-Flex R78684 Gear ratio ( i ): 1:1 Speed ( n ): max. 6000 rpm Mount: ER25 Flange: Ø 55 mm / 85 x 85 mm hole spacing: 65 mm 4x bore: Ø 10.5 mm, with countersunk hole: Ø 18 mm, Depth: 11 mm with accessories used, checked ! Dimensions ( tool holder ): 163 x 85 x 85 mm Dimensions ( packaging ): 200 x 135 x 100 mm

Stock number: 3846 Angetribende Tool Manufacturer: Eppinger , Type: 9.654.088 Year of construction: 0 Specifications: VDI-40 Size Winckel 90 Insert Type ER32 External Cooling Speed max 5000 rpm Motor Power Driven Tools 40Nm Okuma LT300-M, Okuma LT15-M, Okuma LB300-MYW, Okuma LB300-M,

Stock number: 3849 Angetribende Tool Manufacturer: Eppinger , Type: 4.201.109 Machine NO.: 3, Specifications: Size VDI 40 Winckel 90 Insert Type ER32 Internal Cooling Speed max 5000 rpm Motor Power Driven Tools 70Nm Preci-Flex tool system Okuma LT300-M, Okuma LT15-M, Okuma LB300-MYW, Okuma LB300-M,

Stock number: 3851 Angetribende Tool Manufacturer: WTO, Type: 410520135-40 Machine NO.: 5, Specifications: VDI-40 Size Winckel 90 Insert type ER32 - K19-09608-1.1 Internal Cooling Speed max 6000 rpm Motor power driven tools 63 Nm Okuma LT300-M, Okuma LT15-M, Okuma LB300-MYW, Okuma LB300-M

Stock number: 3852 Angetribende Tool Manufacturer: Eppinger , Type: 4.200.952 Machine NO.: 7 - 296747-1 Specifications: VDI-40 Size Straight Insert Type ER32 Internal Cooling Motor power driven tools 50 Nm Preci-Flex tool system Okuma LT300-M, Okuma LT15-M, Okuma LB300-MYW, Okuma LB300-M,

Stock number: 3853 Angetribende Tool Manufacturer: Benz, Type: 114EA04941E6 Machine NO.: 8, Specifications: VDI-40 Size Straight Insert Type ER32 Speed max 4500 rpm Motor power driven tools 50 Nm Okuma LT300-M, Okuma LT15-M, Okuma LB300-MYW, Okuma LB300-M,

Stock number: 3854 Angetribende Tool Manufacturer: Benz , Type: 114EA04941E6 Machine NO.: 9, Specifications: VDI-40 Size Straight Insert Type ER32 Speed max 4500 rpm Motor power driven tools 50 Nm Okuma LT300-M, Okuma LT15-M, Okuma LB300-MYW, Okuma LB300-M,

Shipping within Germany 8.- € insured VAT not deductible

Description: - Approx. Onsite Dimension. (l x w x h): 320 x 250 x 110 mm, weight approx.: 50 kg

Description: Consisting of 7 pieces Equipped with cutting tools Approx. Onsite Dimension. (l x w x h): 700 x 400 x 180 mm, weight approx.: 70 kg

Description: Consisting of 4 pieces Approx. Onsite Dimension. (l x w x h): 500 x 300 x 100 mm, weight approx.: 30 kg

Description: Consisting of 3 pieces Equipped with cutting tools Two of them adjustable in angle Approx. Onsite Dimension. (l x w x h): 500 x 400 x 120 mm, weight approx.: 70 kg

Description: Consisting of 8 pieces Different manufacturer Approx. Onsite Dimension. (l x w x h): 500 x 500 x 200 mm, weight approx.: 70 kg

Description: Consisting of 4 pieces Approx. Onsite Dimension. (l x w x h): 500 x 300 x 100 mm, weight approx.: 30 kg

Description: Consisting of 3 pieces Equipped with milling cutters Approx. Onsite Dimension. (l x w x h): 290 x 200 x 180 mm, weight approx.: 30 kg

Description: Consisting of 9 pieces Approx. Onsite Dimension. (l x w x h): 600 x 400 x 100 mm, weight approx.: 80 kg

Description: Consisting of 4 pieces Approx. Onsite Dimension. (l x w x h): 500 x 300 x 100 mm, weight approx.: 30 kg

Description: Consisting of 3 pieces Equipped with milling cutters Approx. Onsite Dimension. (l x w x h): 290 x 200 x 180 mm, weight approx.: 30 kg

Description: Consisting of 3 pieces Approx. Onsite Dimension. (l x w x h): 350 x 300 x 120 mm, weight approx.: 30 kg

Description: Consisting of 4 pieces Approx. Onsite Dimension. (l x w x h): 400 x 350 x 120 mm, weight approx.: 50 kg

Description: 6 pieces 4 pieces for horizontal milling and drilling Manufacturer: SAUTER 2 pieces: vertical milling and drilling Manufacturer: SAUTER For serial numbers and type designations see pictures Important note: the tool holders are delivered without the mounted machine tool. These are not included in the scope of sale and delivery Approx. Onsite Dimension. (l x w x h): 470 x 160 x 160 mm, weight approx.: 20 kg

Description: 6 pieces 4 vertical tool holders 3 x Manufacturer: SAUTER 1 x Manufacturer: EPPINGER 2 horizontal tool holders Manufacturer: Sauter For type designations and serial numbers see pictures Important note: the tool holders are delivered without the mounted machine tool. These are not included in the scope of sale and delivery Approx. Onsite Dimension. (l x w x h): 470 x 160 x 160 mm, weight approx.: 20 kg

Description: Consisting of 10 pieces Approx. Onsite Dimension. (l x w x h): 500 x 400 x 70 mm, weight approx.: 40 kg

Description: Consisting of approx. 9 pieces Different manufacturer Approx. Onsite Dimension. (l x w x h): 800 x 400 x 200 mm, weight approx.: 60 kg

Description: 7 pieces different manufacturers Approx. Onsite Dimension. (l x w x h): 600 x 600 x 200 mm, weight approx.: 30 kg

Description: Consisting of 4 pieces Suitable for lot 1, lot 10 and lot 20 weight approx.: 50 kg, Approx. Onsite Dimension. (l x w x h): 600 x 200 x 150 mm

Description: In different sizes One of them adjustable in angle Consisting of approx. 7 pieces Suitable for lot 1, lot 10 and lot 20 weight approx.: 50 kg, Approx. Onsite Dimension. (l x w x h): 600 x 200 x 150 mm

Description: Consisting of 5 pieces Suitable for lot 1, lot 10 and lot 20 weight approx.: 50 kg, Approx. Onsite Dimension. (l x w x h): 600 x 200 x 150 mm

Description: Six pieces weight approx.: 20 kg, Approx. Onsite Dimension. (l x w x h): 500 x 500 x 100 mm

New extractor frame 900 mm on steel construction. 2 winding capoles are used underneath for edge-straight Winding positioned. The winding capoles are fitted with new pneumatic Expansion winding shafts for 76 mm bobbins. with electric drives

UP Mini , Uni Push Repair / inspection and replacement pradler gear technology Pradler Transmission Technology info@pradler.com Service and Replacement PradlerGetriebetechnik.de Tel. 05242 / 43186 email: info@pradler

Variable speed drive

Mobile pumping station w / air driven pump and 2 "camlock couplings and flushing. Build in PE plastic.

Recon Part number: 1216-3235 Please note: we also have other various RECON parts of different manufaturers / types in stock. We are pleased to provide you with our current stock list. ---------------------------------------------------------------------- ----------- If you have any further questions do not hesitate to contact us