lathe drive tool used for sale

A CNC lathe Optimum is offered. Swing over bed/cross slide: 300mm/200mm, distance between centers: 430mm, X/Z travel: 145mm/465mm, X/Z rapid traverse: 10m/min/12m/min, bar capacity: 30mm, spindle bore: 30mm, max. spindle speed: 4000rpm, tool stations: 6, control: Siemens SINUMERIK 808D ADVANCED. Machine dimensions X/Y/Z: approx. 1655mm/1590mm/1955mm, weight: approx. 832kg. An on-site inspection is possible.

small fine construction with 3 RPMs clockwise and 3 RPMs counterclockwise

Distance between centers: 2000mm, control: Siemens Sinumerik 810, the controls flash memory is currently probably defective, but the parameters can still be accessed. an on-site inspection is possible.

Fuse protection: 100A, control voltage: 220V, operating voltage: 380V, connected load: 30,4kW, weight: 14,4t, with four-jaw chuck (diameter: 900mm), tailstock, quill, three steady rests and control system. An on-site inspection is possible.

Center height: 450mm, distance between centers: 3000mm, fuse protection: 630A, rated current: 46A, control voltage: 220V, operating voltage: 380V, frequency: 50Hz, connected load: 22,5kW, weight: 6,1t, with four-jaw chuck (diameter: 800mm), tailstock, quill and three steady rests. An on-site inspection is possible.

Control voltage: 24V DC, rated current: 85A, connected load: 39kVA, rated power: 49kW, control-on operating hours: 32,779h, automatic operation 1: 5,040h, automatic operation 2 operating hours: 1,844h, production time: 33,731h, length: 3231mm, width: 2076mm, height: 1917mm, weight: 4.8t, with documentation, chip conveyor and FMB turbo 8-80 bar feeder. An on-site inspection is possible.

Rated current: 60A, control voltage: 24V, connected load: 33kW, length: 2290mm, width: 1350mm, height: 1630mm, weight: 4.65t, operating hours: 78,439h, with documentation, chip conveyor and bar feeder. An on-site inspection is possible.

Center height: 225mm, distance between centers: 1000mm, swing over bed/cross slide: 450mm/260mm, spindle bore: 65mm, max. spindle speed: 3000rpm, max. feed rate: 10m/min, tool turret: 4, main motor power: 7.5kW, control: Fanuc 0i Mate TC. Machine dimensions X/Y/Z: approx. 3500mm/1500mm/1700mm, weight: approx. 1550kg, operating hours: approx. 27000h, feed hours: approx. 1329h. Documentation available. An on-site inspection is possible.

Center height: 200mm, distance between centers: 1000mm, swing over bed/cross slide: 400mm/225mm, spindle bore: 62mm, spindle nose: DIN 55027/6, tailstock taper: MK4, max. spindle speed: 4000rpm, main drive power: 10.5kW, operating hours PLC/motor: 1218h/145h. Machine dimensions X/Y/Z: approx. 2100mm/1080mm/1800mm, weight: approx. 1800kg. An on-site inspection is possible.

Distance between centers: 1500mm, swing over bed/cross slide: 620mm/400mm, control: Heidenhain ManualPlus 420. The machine has been in daily single-shift operation since 2008. An on-site inspection is possible.

L & Z lathe WEILER CONDOR B incl. three-axis digital display -CE - Identifier -Machine from educational institution / very well maintained -Tip height 165mm -Circumferential diameter over bed 330mm -Circumferential diameter over face slide 185mm -Turning length 800mm -Spindle speeds 22 - 2800 rpm - Automatic / longitudinal & face feeds -Thread/Metric/Inch etc. -Rod passage 40mm -Tailstock / quill holder MK 3 -Multifix base holder & inserts -Three-jaw end-ender 200mm -Electric lining protection -Spindle protection cover - 2x Emergency / Off -Coolant device -Swarf back wall -Documentation Dimensions: LxWxH 1.8x0.8x1.6 meters / Weight 1200Kg

L & Z Lathe / Bickenbach LE-20-10-S incl. 3-axis digital display -Very well maintained original condition from educational institution -CE - Identifier -Year of construction 2008 -Three axis digital display -Turning diameter 420mm -Circumferential diameter over bed slide 250mm -Turning diameter in the offset 580mm -Turning length 1000mm -Speed range (transmission) 20 - 2000 rpm -Spindle bore 58 mm -Tailstock cone MK 4 / quill travel 130mm -Röhm three-jaw chuck 250mm & interchangeable jaws -Fixed bezel -Multifix base holder & 3x inserts -Coolant device -Foldable protective device for steel holders -Electric lining protection -Foot brake -Swivel machine light -Running tip (Röhm) -Machine feet -Bed stop -Swarf back wall -Emergency / Off -Operating tool Dimensions: LxWxH 2.1x0.8x1.7 meters / Weight 1600Kg

Spindle nose: A11, turret: VDI60, voltage: 380V, rated current: 153A, fuse protection: 160A, control: Philips B2T, one tool position for boring bars is defective, no driven tools, without chuck, with documentation and maintenance records, the machine was mechanically overhauled in 2010. An on-site inspection is possible, available from mid-December 2026.

A Spinner CNC lathe in need of repair is offered. Control: FANUC Series 31i-A, spindle operating hours: approx. 36824h. The lower turret is locked but incorrectly indicates unlocked status. A broken spring is suspected as the cause. Documentation available. Inspection by appointment possible.

2006 ROMI 33×80 Oilfield Hollow-Spindle CNC Lathe Manufacturer: ROMI Model: 33×80 Year: 2006 CNC Control: FANUC 21iT Application: Oilfield / Heavy-Duty Machining Main Specifications Swing over bed: 33” Swing over cross slide: 23” Chuck size: 24” Spindle bore / bar capacity: 10.5” Maximum turning diameter: 23” Maximum turning length: 90” Maximum spindle speed: 750 rpm Main motor: 60 HP Tailstock: Yes CNC control: FANUC 21iT Electrical: 480 V / 75 A FLA Approx. machine weight: 30,000 lbs Included Equipment 2 × chip pans — approx. 5’ × 11’ × 4’ — 1,000 lbs each Chip conveyor — approx. 4’ × 12’ × 6’ — 2,000 lbs Chiller — approx. 2’ × 2’ × 5’ — 1,200 lbs Hydraulic pump — approx. 2’ × 3’ × 5’ — 1,500 lbs Shipping Dimensions Main machine: 17’ × 8’ × 7’ — approx. 30,00 ...

Inv. Num. : 8204 Type: SK 12 Producer: TOS Created: 1953 Parameters: Max. turning diameter: 1350 mm Clamp plate diameter: 1180 mm Length: 2360 mm Width: 3860 mm Height: 4260 mm Weight: 18300 kg

Key data: 200 mm, 900 mm, 310 mm

Paulimot PM4000 lathe with measuring system and base cabinet For sale is a Paulimot PM4000 precision lathe including a digital measuring system (3-axis digital display) and matching base cabinet. The machine is ideal for use in workshops, model making, prototype production, training or for demanding hobby users. The integrated measuring system allows work to be carried out precisely and comfortably. Equipment: Paulimot PM4000 Lathe Digital measuring system / digital display Sturdy base cabinet Lead and pull spindle Forward and backward running Various feed and thread settings Ready to use Technical data: Center width: 900 mm Circumferential diameter over bed: 310 mm Spindle bore: 38 mm Clamping range inner jaws: 4-200 mm Clamping range outer jaws: 65-200 mm Motor power: 1.5 kW Power supply: 400 V Condition: The machine is in used and functional condition  ...

Speed: 12.5-2000/min, with documentation. An on-site inspection is possible.

Total power: 6kW, voltage: 400V, frequency: 50Hz/3-phase. Documentation available. Inspection by appointment possible.

CATEGORY - 5-Axis BRAND - DMG MORI MODEL - NT 5400/1800 SZ DCG WAREHOUSE NO - ONY100000580 YEAR OF MANUFACTURE - 2007 CONTROL UNIT - MSX-701 III AXIS TRAVELS - X1 1,040 MM / X2 267 MM / H ± 255 MM / Z1 1,940 MM / Z2 1,830 MM ROTARY AXIS MOVEMENTS - B ±120° / C 360° MAX. TURNING DIAMETER - 920 MM MAX TURNING DIAMETER - 470 MM MAX TURNING LENGTH - 1.921 MM SPINDLE - 1 SPINDLE SPEED - 2,400 MIN/-1 MIRROR SIZE - 450 MM ROD DIAMETER - 107 MM MAIN SPINDLE SPEED (S1) - 8,000 MIN/-1 HOLDER TYPE - CAPTO C8 SPINDLE - 2 COUNTER MIRROR REVOLUTION - 2,400 MIN/-1 MIRROR SIZE - 450 MM TURRET-2 NUMBER OF HOLDERS - 10 MACHINE WEIGHT - 36.000 KG MACHINE EXTERNAL DIMENSIONS - 4.50 X 6.61 X 3.46 M

faceplate diameter: 3200 mm swing diameter: 5100 mm turning height: 2505 mm cross rail - adjustment: 1500 mm max. ram stroke: 1250 mm slide adjustment: 2000 mm control: Siemens 8 T tool changer: 16 STK table load: 60 t faceplate turning speed range -stepless-: 0,8-100 U/min feed: 0,0 1-1000 mm/min rapid traverse: 6000 mm/min drive of main spindle: 75 kW weight of the machine ca.: 70 t dimensions of the machine ca.: 9,3 x 6,1 x 6,0 m machine is in an excellent condition with div. acessories (photos available) machine can be equipped with latest electrics and Siemens CNC control SINUMERIK 840D sl for additional costs. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

VEB DLZ 1000/4000

Center height [mm] 625 Auction-ID: A1-40982-120

General Description Heavy-duty faceplate lathe manufactured by HEYLIGENSTAEDT , Germany. Designed for precision turning, facing and boring of large rings, discs, shafts and other oversized workpieces exceeding the capacity of conventional engine lathes. The machine is equipped with a large faceplate, heavy carriage and has been modernized with a Schneider Electric variable frequency drive. Technical Details Manufacturer: HEYLIGENSTAEDT Model: Not identified Machine type: Heavy-duty faceplate lathe Year: Not confirmed Large faceplate: Approx. 2,500 mm diameter Conventional manual control Mechanical variable-speed drive: P.I.V. Antrieb Werner Reimers K.G., Variant MRHC 23 Gear No.: 29946061 Oil capacity (P.I.V. drive): Approx. 5.5 L Variable frequency drive: Schneider Electric Altivar 630 (ATV630D11N4), 11 kW Original German spindle speed and feed charts Condition Good  ...

turning diameter over bed: 250 mm turning diameter over slide rest: 145 mm turning length: 550 mm turning speeds: 50 - 2000 U/min centre height: 125 mm spindle bore: 26 mm tailstock quill taper MT: 2 MK connected load frequency: 230 V total power requirement: 0,75 kW weight of the machine ca.: 0,12 t dimensions of the machine ca.: 1,3 x 0,65 x 0,6 m longitudinal feed. 3-jaw chuck 125 mm. 4-way steel holder. chip tray, bulkhead Hardened bed tracks. Emergency stop switch. lining protection Tool box, instruction manual. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 290 mm turning diameter over slide rest: 170 mm turning length: 750 mm turning speeds: 75 - 2000 U/min centre height: 145 mm spindle bore: 38 mm tailstock quill taper MT: 3 MK tailstock quill stroke: 80 mm connected load frequency: 230 V total power requirement: 1,5 kW weight of the machine ca.: 0,34 t dimensions of the machine ca.: 1,3 x 0,75 x 0,7 m Longitudinal and transverse feed. 3-jaw chuck 160 mm. 4-jaw chuck 160 mm. faceplate 4-way steel holder with 4 pcs tool holders 2 pcs. bezels Machine light Drip tray Hardened bed tracks. Emergency stop switch. Feed protection Set of wheels. Machine tools. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Thread-cutting gears, number of teeth: 30, 57, 60, 105, 120, 127, equipment: lead screw for thread cutting, separate feed system, automatic longitudinal and cross feed, change gear for feed and thread gearbox, back gear in the headstock, three-jaw chuck, cross slide and compound slide, four-way tool post, tailstock, an on-site inspection is possible.

Manufacturer: Scheppach, Type: DMT 8108, Peak width in mm: ca.1000 mm, Peak height in mm: ca.150, FREE TEXT: kw Leistung 0,75/6 Geschwindigkeiten 370/600/1000/1700/2700 ,

Parallel Lathe CAZENEUVE HB 725 Between points: 1500 mm Maxi Ø on bench: 725 mm Maxi Ø over saddle: 400 mm Spindle diameter: Ø 80 mm Rotation: from 16 to 1250 RPM Square turret 4-jaws chuck Ø 450 mm Spindle motor power: 13,2 kW Threadings: Metric + Whitworth Tailstock: CM6 Rapid advances Supplied with some sets of hard and soft jaws + one 3 points steady max Ø 250 mm Lubricant tank Lubricant pump Voltage: 220 V Tri Length: 3200 mm Depth with tank: 1600 mm Height: 1800 mm Weight: approx 4,5 T

Parallel Lathe CAZENEUVE type HB 575 Between points: 2000 mm Maxi Ø on bench: 575 mm Maxi Ø over saddle: 300 mm Spindle diameter: Ø 51 mm Rotation: from 20 to 1600 RPM Turret TRIPAN 411 3-jaws chuck Ø 200 mm Spindle motor: 15 CV ThreadingsMetric + Whitworth TailstockCM5 Lubricant tank Lubricant pump Supplied with 3 TRIPAN tool holders Voltage: 380 V Length: 3500 mm Width with tank: 1500 mm Total height: 1400 mm Weight: approx 3 T

Manufacturer: EMAG Model: VL 3 HW mLLT Year of Manufacture: 2008 Data of VL3: - Lifetool available for powered tools - Interface for automation - additional inputs and outputs / M-functions - Shuttle operation - Machine was never driven wet (always dry) Electrical Specifications: Current Supply: 3 AC Frequency: 50/60 Hz Working Voltage: 400/480 V Control Voltage - General: 24 VDC Control Voltage - Valves: 24 VDC Connection Value: 38 kW Rated Current: 58 A Supply Fuse: 80 A Physical Specifications: Total Weight: 5500 kg Find more here - .ucymachines/ Contact us at - sales@ucymachines

turning diameter over bed: 250 mm turning diameter over slide rest: . mm centre distance: ca. 400 mm centre height: ca. 125 mm turning speed range: 80 - 3000 U/min number of speeds: 18 spindle bore: 24 mm tailstock quill taper MT: 3 weight: ca. 400 kg dimensions: ca. 1200 x 650 x 1300 mm 4-jaw-chuck diameter: 125 mm including Röhm four-jaw chuck, Ø 125 mm incl. drilling and turning jaws, collet chuck device incl. collets 1-20 mm (exept 5 and 10 mm) with 1 mm gradient Multifix size A with 3 interchangeable holders, chuck protection with shutdown The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Turning diameter 900 mm Turning length 5000 mm

number of spindles: 8 bar capacity: 36 mm control: FANUC 30i-B Subspindle speed: 7.500 U/min Bar Automatic Lathe - Multi Spindle | DMG GILDEMEISTER - MULTISPRINT 36 equipped with bar feeder and a coolant system. The machine only has 6.944h spindle hours. The machine is in a well-maintained condition and can be inspected under power. For additional equipment information please refer to the original order confirmation which is included in the offer of this machine. The machine works with a EGS loading system -> This can be purchased separately An extensive tool package is included. The machine video from the production plant will be shared on request. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: MULTISPRINT36 | MULTISPRINT-36 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

number of spindles: 8 bar capacity: 36 mm control: FANUC 30i-B Subspindle speed: 7.500 U/min Bar Automatic Lathe - Multi Spindle | DMG GILDEMEISTER - MULTISPRINT 36 equipped with bar feeder and a coolant system. The machine only has 15.650h spindle hours. The machine is in a well-maintained condition and can be inspected under power. For additional equipment information please refer to the original order confirmation which is included in the offer of this machine. The machine works with a EGS loading system -> This can be purchased separately An extensive tool package is included. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: MULTISPRINT36 | MULTISPRINT-36 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

number of spindles: 8 bar capacity: 36 mm control: FANUC 30i-B Subspindle speed: 7.500 U/min Bar Automatic Lathe - Multi Spindle | DMG GILDEMEISTER - MULTISPRINT 36 equipped with bar feeder and a coolant system. The machine only has 15.666h spindle hours. The machine is in a well-maintained condition and can be inspected under power. For additional equipment information please refer to the original order confirmation which is included in the offer of this machine. The machine works with a EGS loading system -> This can be purchased separately An extensive tool package is included. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: MULTISPRINT36 | MULTISPRINT-36 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

centre height: 102 mm centre distance: 450 mm spindle bore: 25 mm spindle speed:: 220 - 2600 weight of the machine ca.: t dimensions of the machine ca.: m Accessories were not checked for completeness Cabinets are not included in the scope of delivery The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Auction-ID: A1-40982-131

Circumferential diameter over bed ... 500mm Turning length ... 2000mm Max. workpiece weight ... 300kg Circumferential diameter via support ... 270mm Spindle bore ... 52mm Spindle speed ... 22-2000 rpm Main engine power ... 5.5kW L x W x H ... 3640x1100x1580mm Machine weight ... 1940kg The machine is in good condition, possible to test under power.

UGB-150 widht: 1435mm rangę diameter : ø600 do ø1500mm maks. distance: 1500mm

Key data: 430 mm, 1000 mm, 430 mm

Turning length: 1,000 mm Turning diameter over bed: 430 mm Turning diameter over slide: 255 mm Spindle speeds: 19 - 2,000 rpm Spindle bore: 56 mm Equipped with: - Various Multifix tool containers - Coolant device Country of origin: Germany Motor power: 7.5 kW Machine LxWxH: 360 x 103 x 130 cm Machine weight: 1800 kg

workpice diameter max.: 90 mm forward bearing diameter: 140 mm Turning speeds mainspindle: 4.200 U/min Power: 35,5 KW Control: INDEX C 200-4 travel -x axis: 1.500 mm travel -z axis: 340 mm travel -y axis: 180 mm b-axis: 360 ° CNC turning and milling center vertical | INDEX - V300 equipped with a turret for driven tools as well as y- + B- axis. Further information: - direct measuring system on X + Z The machine is in good condition. For additional equipment information please refer to the original order confirmation which is included in the offer of this machine. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: V-300 | V 300 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Manufacturer: GILDMEISTER Model: MSL 42 Operating Hours: 3,000 Find more here - .ucymachines/ Contact us at - sales@ucymachines

Turning diameter over bed/face slide: 360mm/160mm, center distance: 800mm, travel X/Z: 205mm/810mm, speed: 3150rpm, spindle bore: 60mm, tool positions: 8, rapid traverse X/Z: 10m/min. Machine dimensions X/Y/Z: approx. 3300mm/1800mm/1800mm, weight: approx. 3300kg, control: Traub System TX-8. An on-site inspection is possible.

Three Okuma CNC horizontal lathes are available. 1) Okuma LB 15 M. 2) Okuma LB 15. 3) Okuma LB 15 W. The Okuma LB 15 W is defective. On-site inspection is possible. Individual sale possible.

turning diameter: max. 250 mm turning length: max. 900 mm control: FANUC SERIE 0-T turning spindle: Durchlass 75mm chuck diameter: 250 mm turning speeds: 0-3700 U/min transmission ratio: 2 tool numbers: 12 feed speeds: X/Z 15/20 mm/min quill stroke: 100 mm diameter of quill: 110 mm tool adaptor: MK 4 coolant tank: 130 l weight - pallet system: 5500 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: 450 mm turning length: 380 mm control: FANUC The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

serial number: 1113-23 turning length: 500 mm turning diameter: 220 mm chip conveyor: ja kW : Werkzeugwechsler 12-fach spindle turning speed range: 5000 U/min tail stock: automatisch Control: The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: 400 mm turning length: 915 mm control: NUM Type 1062 T total power requirement: 12,5 kW weight of the machine ca.: 5500 kg dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: 200 mm turning length: 400 mm control: SIEMENS SINUMERIC 840 C total power requirement: 40 kW weight of the machine ca.: 6.500 kg dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.