lathe drive tool used for sale

Lathe spinning tool, roller block, support roller -Support roller: solid design -Roll: Ø 145 mm -Square: 73 x 26 mm, clamping length 180 mm -Number: 2x roller block available -Dimensions: 350/145/85 mm -Weight: 8.4 kg/piece

Tool changer for lathe, tool disc turret, turret system, disc turret for lathe -Manufacturer: Swedturn, Type ST12 CNC 300 tool changer -Tool turret: for max. 12 tools -Tool holder: Ø 60 mm -Individual components: see photos -Dimensions: 565/470/H565 mm -Weight: 319 kg

Turning tool with indexable cutting jaws, clamping holder, turning tool, indexable insert holder, turning tool, indexable insert tool -Dimensions: 150/25/H25 mm -Weight: 1 kg

Turning tool with indexable cutting jaws, clamping holder, turning tool, indexable insert holder, turning tool, indexable insert tool -Dimensions: 170/30/H40 mm -Weight: 1 kg

Turning tool with indexable cutting jaws, clamping holder, turning tool, indexable insert holder, turning tool, indexable insert tool -Dimensions: 155/19/H16 mm -Weight: 0.5 kg

Turning tool with indexable cutting jaws, clamping holder, turning tool, indexable insert holder, turning tool, indexable insert tool -Dimensions: 155/19/H16 mm -Weight: 0.5 kg

Turning tool with indexable cutting jaws, clamping holder, turning tool, indexable insert holder, turning tool, indexable insert tool -Dimensions: 180/25/H20 mm -Weight: 0.5 kg

Turning tool with indexable cutting jaws, clamping holder, turning tool, indexable insert holder, turning tool, indexable insert tool -Turning tool inclination: 107.5° -Dimensions: 150/30/H25 mm -Weight: 0.7 kg

Turning tool with indexable cutting jaws, clamping holder, turning tool, indexable insert holder, turning tool, indexable insert tool -Dimensions: 125/20/H35 mm -Weight: 1 kg

Turning tool with indexable cutting jaws, clamping holder, turning tool, indexable insert holder, turning tool, indexable insert tool -Dimensions: 235/55/H50 mm -Weight: 3.5 kg

Turning tool holder, CNC internal turning tool holder -Various sizes -Outer diameter: Ø 63 mm -Sale: as a package -Weight: 9.5 kg

Turning tool holder, CNC internal turning tool holder -Outer diameter: Ø 60 mm -Sale: as a package -Weight: 2 kg

Turning tool with indexable cutting jaws, clamping holder, turning tool, indexable insert holder, turning tool, indexable insert tool -Dimensions: 150/25 mm Price: per piece -Quantity: 1 available -Weight: 1 kg

Turning tool with indexable cutting jaws, tool holder, turning tool, indexable insert holder, turning tool, indexable insert steel -Dimensions: 150/25 mm -Price: per piece -Number: 2x available -with: 20x Widia plates each -Weight: 1 kg

Tool changer for lathe, tool disk turret, top support, top slide, dovetail guide -for: max. 6 tools -Changer comes from a Gildemeister CNC lathe type: NEF 560 - Tip height: 105 mm -Turning chisel holders: 25 x 25 x 100 mm -Quantity: 2 pieces available -Price per piece -Dimensions: 315/315 / H380 mm -Weight: 87 kg

tool changer for lathe, tool disc turret, turret system, disc turret for lathe -Manufacturer: Sauter, tool changer type 0.5.675.112 from vertical lathe Scherer VDZ 80 DS -Tool turret: Type 0.5.901.012 for max. 12 tools -Servo motor: Siemens type 1FK7063-2AC74-1SB0 -Individual components: see photos -Dimensions: 560/450/H300 mm -Weight: 117 kg

7 tools Overall dimensions: 200 x 150 x 100 mm Weight: 2 kg Auction-ID: A7-49495-454

For the benefit of Fat Tur630A MN lathe. Includes 3-Piece Hagro Workbench with Heuer Front bench vise. Dimensions approx. L200 x W90 x H86 cm. Auction-ID: A1-49846-2

UNIQUE AND INDIVISIBLE LOT – 78 METALPROFI AUSTRIA METAL MACHINE TOOLS, new, never put into service, in original crates. 21 references. Cumulative catalogue RRP 167 976 € excl. VAT. METAL LATHES / COMBINED – 38 machines • 16x WM180V-MONO – 300 Needle Spacing, Machinable Ø 180 mm, 50-2550 rpm, CM3, 600 W, 7 Carbide Tools + 3-jaw Chuck Ø100 • 5x WM210V-MONO – EP 400, Ø 210 mm, same equipment • 4x JY250VL-F-MONO + 3x JY250VL-F-DIGI – EP 750, Ø 250 mm, 50-2000 rpm, MK4, 750 W, 2-axis view (DIGI) • 2x S1100K-DIGI \"SUPER 1100 Professional\" – EP 1100, Ø 330 mm (460 broken bed), 70-2000 rpm, 8 speeds, MK5, 1500 W, 600 kg, 3-axis visu, 3-jaw chucks Ø160 + 4 jaws Ø200, scopes, chainring Ø250, high-speed turret, housing • 3x CJM280/815-MONO + 2x CJM280/815-TRI – EP 815, Ø 280 mm, 12 speeds 45-2000 rpm, MK5, visu, speed turret, scopes, 3 and 4 jaw chucks  ...

7 tools Overall dimensions: 200 x 150 x 100 mm Weight: 2 kg Auction-ID: A7-50065-454

Lot of 11 Tungsten Tools Overall dimensions: 300 x 200 x 50 mm Weight: 2 kg Auction-ID: A7-50208-256

Lot of 11 Tungsten Tools Overall dimensions: 300 x 200 x 50 mm Weight: 2 kg Auction-ID: A7-50208-327

7 tools Overall dimensions: 200 x 150 x 100 mm Weight: 2 kg Auction-ID: A7-50208-309

7 tools Overall dimensions: 200 x 150 x 100 mm Weight: 2 kg Auction-ID: A7-50066-454

7 tools Overall dimensions: 200 x 150 x 100 mm Weight: 2 kg Auction-ID: A7-50208-251

Consisting of, among other things: 3 and 4-jaw chucks, keys, drills, milling cutters, machine parts. Auction-ID: A1-50090-173

Technical data Mixed lot of various tool holders and tool holders for lathes Manufacturers include: ZÜRN, EWS, WNT Condition: used Configuration - Various tool holders in different designs - Tool holders with serrated holding shanks - Tool holder with drill chuck - Other machine and tool holders Remarks Scope according to photos. Auction-ID: A7-50403-125

Grinding body dimension: 200 x 40 x 76 mm Circumference speed: 30 m / sec Follow-up value: 0.7 kW Weight: approx. 250 kg Specification: Double grinding bracket with integrated suction

Tool cabinet for bending tools pull-out drawers, allows the two-sided access to the tools -any adjustment of the inserting roofs -robust steel construction, powder-coated, in any colors of the RAL pallet -side fork guide rails for transport by means of forklifts (cavity under the cabinet) -the drawers run on roller slide rails (serve as additional stabilization) . number of drawers: 4 squares - Mass of a drawer : - total height 1200mm / total width 850mm / total depth 1050mm - mass of the faeces set in a drawer: compartment heahe on 210mm (is varriabel) technical height can be used in total without intermediate boeden 990mm compartment width usable 130mm depth usable 980mm - number of intermediate boeden: 3 stubs ; ready for use

universal tool sanding machine manufacturer fa Kellenberger (Strausak) the machine is geometrical and also funktionmig in a very good state. Spitzenh?he: 125 mms top width: 680 mms L?ngsbewegung: 500 mms Arbeitsfl?che of the table: 1030 x 214 mms Q?rzustellung: 280 mms mm H?henverstellung Schleifkopf:300 wheel area Schleiftisch: + 90 °/-45 ° wheel area Schleifkopf: 350 ° Horizontally wheel area Schleifkopf: 360 ° Vertically Schleifspindel 4 speeds: 2250-3000-4500-6000 revos Schleifscheibendurchme?er: 250 mms Antriebsleistung:Schleifsp .: 1.5 kW Sony 2-axes digital display 0,001 mms

Accessories fur WU 3 ms, apparatus of part of, round loop facility, etc. More info on request

Tool cabinet for bending tools Suitable for WILA/TRUMPF Tools or type B L / W / H: 1180 mm x W 850 mm / H 1200mm, 350kg -extendable drawers, allows the two-sided access to the tools -arbitrary adjustment of the inserting roofs -robust steel construction, powder-coated -side fork guide rails for transport by means of forklifts (cavity under the cabinet) run drawers Roller slide rails (serve as additional stabilization) - the cabinet can be disassembled - number of drawers: 4 sets - Mass of a drawer : - total height 1200mm / total width 850mm / total depth 1180mm - Mass of the Fa echer in a drawer: compartment hoehe set to 210mm (is varriabel) technical height total usable without intermediate boeden 990mm - specialist width usable 130mm depth usable 1100mm - Number of intermediate boeden: 4 Stueck / completely continuous; new ready for use

Labeling Division m/m lettering / Stamped no. Slope 25 1:3 4x3 9006 4.3.74 41a 7 8x8x8x8 40 6 3 401 5 m/m 44 3:1 3x4 1235 51 3:1 4x4 Viereckloch / Nr. 38449 42 2x8 Kunststoffkamm / USA 41 2x7 Kunststoffkamm 20 3:1 3.5x4.5

Tool cabinet for bending tools / exhibition object suitable for AMADA/PROMECAM or type A L / W / H: 1050 mm x W 850 mm / H 1240mm, 310kg - for AMADA/Promecam tools -extendable drawers, allows double-sided access to the tools -any adjustment of the inserting roofs -robust steel construction, powder-coated -side fork rails for transport by forklift (cavity under the cabinet) -the drawers run on roller slide rails ( serve as additional stabilization) -the cabinet can be disassembled - Number of drawers: 4 squares - Mass of a drawer : - Total height 1200mm / Total width 850mm / Total depth 1050mm - Mass of the faeces in a drawer: - Fachhhoehe set to 210mm (is varriabel) - Fachhoehe total usable without intermediate boeden 990mm - Fachbreite usable 130mm - Technical depth usable 980mm - Number of intermediate boeden: 3 stueck

Complete wheel sets for the production and subsequent sharpening of HSS and carbide tools. Single diamond and CBN discs. for the manufacturing and Resharpening. Grinding wheel shots short and long run. Spacer discs for grinding wheel flanges.

Tool cabinet for press brake Good for AMADA / PROMECAM or Type A L / W / H: 1050 mm x W 850 mm / H 1240mm, 310kg -extendable drawers, allowing access from both sides of the tools -any height adjustment of shelves -sturdy steel construction Fork-lateral guide rails for transporting by forklift (cavity under the cabinet) -The drawers run on Rollengleitschienen (serve as additional stabilization) , the cabinet can be broken - Number of drawers: 4 pieces - Dimensions of a drawer: - 1200mm Overall height / Overall width 850mm / 1050mm Overall depth - Dimensions of the compartments in a drawer: - Fachhhoehe set to 210mm (is varriabel) - Total compartment height 990mm shelves available ohnen - Usable shelf width 130mm - Usable shelf depth 980mm - Number of shelves: 3 piece

Tool cabinet for bending tools suitable for AMADA/PROMECAM or type A L / W / H: 1050 mm x W 850 mm / H 1240mm, 310kg -extendable drawers, allows the two-sided access to the tools -any adjustment of the inserting -robust steel construction, powder-coated -side fork guide rails for transport by means of forklifts (cavity under the cabinet) -the drawers run on roller slide rails (serve as additional stabilization) Cabinet can be disassembled - Number of drawers: 4 squares - Mass of a drawer : - Total height 1200mm / Total width 850mm / Total depth 1050mm - Mass of the faeces in a drawer: compartment hhoehe set to 210mm (is varriabel) - Fachhoehe total usable without intermediate boeden 990mm - Tray width usable 130mm - Depth usable 980mm - Number of intermediate boeden: 3 stueck

Table clamping surface: 630 ø mm traverse path x: 600 mm traverse path y: 450 mm traverse path z: 500 mm Quill stroke: hand 80 mm spindle retainer: ISO 40 spindle speeds: 20-3150 rpm stufenl feeds. adjustable: 1-3000 mm / min rapid traverse rate: 4 m / min. Connection: 380V kW space: 2000 + 850 x 2000 x 2000 mm weight: 3300 kg

Tool cabinet for press brake Good for AMADA / PROMECAM or Type A L / W / H: 1050 mm x W 850 mm / H 1240mm, 310kg -extendable drawers, allowing access from both sides of the tools -any height adjustment of shelves -sturdy steel construction Fork-lateral guide rails for transporting by forklift (cavity under the cabinet) -The drawers run on Rollengleitschienen (serve as additional stabilization) , the cabinet can be broken - Number of drawers: 4 pieces - Dimensions of a drawer: - 1200mm Overall height / Overall width 850mm / 1050mm Overall depth - Dimensions of the compartments in a drawer: - Fachhhoehe set to 210mm (is varriabel) - Total compartment height 990mm shelves available ohnen - Usable shelf width 130mm - Usable shelf depth 980mm - Number of shelves: 3 piece

Control cabinet for roller conveyor used from stock All prices are from Station World and the dismantling and all follow-up costs are to be made by the buyer. VAT is not included in the prices. The contractual agreements for the individual offers must be agreed separately and only apply after the contract has been legally signed. Mistake reserved. All technical details; Measurements, etc., are approximate information and are non-binding for the provider. The technical data are manufacturer or operator information and therefore non-binding for us. Used material is sold to the exclusion of any warranty. We do not accept any liability for used material. Warranty exchange and return are excluded. Customer protection is agreed between the parties. The entire process of dismantling and loading as well as transport is carried out at the buyer's own expense and at the buyer's own ...

Number of boring units // Diameter boring units (mm) 9x 3.0 5x 3.5 1x 4.0 3x 4.5 6x 5.0 9x 5.5 31x 6.0 2x 6.5 19x 7.0 18x 8.0 1x 8.5 9x 9.0 5x 10.0 9x 11.0 2x 13.0 3x 14.0 1x 15.0 1x 16.0 2x 18.0 1x 19.0

Tool cabinet for press brake Good for WILA / TRUMPF tools or Type B L / W / H: 1180 mm x W 850 mm / H 1200mm, 350kg -ausziehbare drawers, allows the double-sided access to the tools -beliebige height adjustment of shelves -robust steel construction, powder coated -Lateral fork guide rails for transporting by forklift (cavity under the cabinet) -The drawers run on Rollengleitschienen (serve as additional stabilization) -The cabinet can be dismantled - Number of drawers: 4 pieces - Dimensions of drawer: - Total height 1200mm / 850mm total width / total depth 1180mm - Dimensions of the compartments in a drawer: - Fachhhoehe adjusted to 210mm (is varriabel) - Trade Height total usable ohnen shelves 990mm - Trade width 130mm available - Trade depth usable 1100mm - Number of shelves: 4 pieces / completely continuous; "ready for operation"

Post driven tools from a Traub CNC lathe VDI 40 As well as some measuring geraete for Traub Rest according to photos Special price

Praezision clamping tool Kombi plug-on pins BestNo. 1052-018 2 stub SK60x40x27 Unused and ovp 1 x as good condition Only against bid! Special price

6 x 50/105, right, Ø13 mm 6 x 50/105, left, Ø13 mm 8 x 60/115, right, Ø13 mm 10 x 70/125, left, Ø13 mm

50 pcs tool cassettes for inserts Fabr. Widax-Heinlein

Electric tool changer RASTER Premat EWD20

Standard performance connection to 380 V, 50 Hz, 3-phase. Equipment: 2 grinding spindles zubehoer ample tool weight:600 kg Flue requirements:1.5x2.6 m -cooling agent device with electric pump