lathe conventional used for sale

Pinacho Lathe S-90/180 - With digital display - Width: 200 cm - Depth: 85 cm - Height: 160 cm - With operating instructions Good condition, fully functional, can be viewed and tried out on site. Shipping also abroad. Sightseeing: Basically, I would like to point out that the article can be viewed and tested under power before purchase in order to rule out misunderstandings. Please ask questions before purchasing to avoid confusion. If you have any general questions or would like to make an appointment for a viewing, I can be reached at any time on the telephone number below or above. Errors in the description and prior sale excepted. VAT is shown separately on my invoices. Shipping with forwarding agent.

Key data: 400 mm

Description Lead and pull spindle lathe VDF Boehringer Göppingen Details Height 1,500 mm Width 1,700 mm Length 4,000 mm without tailstock Bed width 550 mm Bed height 800 mm Bed length 2,000 mm Face Plate Ø 900 mm Forkardt Chuck Ø 500 mm without tailstock, but can be placed Max. workpiece lengths without tailstock 1,500 mm Turning diameter over bed 800 mm Turning diameter over support 640 mm Center height 400 mm 6 pieces of baking 4-fold turning steel holder

Key data: 340 mm

Description Lead and pull spindle lathe VDF Boehringer Göppingen Details Height 1,400 mm Width 1,300 mm Length 4,150 mm Bed width 480 mm Bed height 850 mm Bed length 3,000 mm Face plate Ø 600 mm Forkardt Wedge Bar Chuck Ø 315 mm max. workpiece lengths 2,000 mm Turning diameter over bed 680 mm Turning diameter over support 480 mm Center height 340 mm Drive power 6.5 / 10 kW Lynette Ø 320 mm Multifix holder size C with 5 cassettes

Key data: 400 mm

Description Lead and Pull Spindle Lathe Weisser Heilbronn Details Built in 1969 Height 1,700 mm Width 1,500 mm Length 3,100 mm Bed width 500 mm Bed height 850 mm Bed length 2,000 mm Face plate Ø 600 mm Food possible by arrangement max. workpiece lengths 1,300 mm Turning diameter over bed 800 mm Turning diameter over support 560 mm Center height 400 mm Spindle speed 1,120 rpm. Multifix holder size C with 5 pockets

Key data: 460 mm

Description Lead and Pull Spindle Lathe Lieber LSD S Details Machine no. 1770 Year of manufacture 1984 Height 1,800 mm Width 1,700 mm Length 2,600 mm Bed width 500 mm Bed height 850 mm Bed length 1,600 mm Face Plate Ø 900 mm Forkardt chuck Ø 400 and 500 mm possible (by arrangement) Tailstock MK4 mount max. workpiece lengths 1,000 mm Turning diameter over bed 920 mm Center height 460 mm Turning steel holder will be added

Tip height: 265 mm Center width: 1500 mm Circumferential Ø: over bed 540 mm Spindle bore: 65 mm Spindle mount: size 8 Pick-up cone tailstock: 5 MK Spindle speeds: 9 - 1800 rpm Feeds: longitudinal/flat 0.063-2.24/0.032-1.12 mm/rev Thread pitches: 0.35 - 560 mm Electrical connection: 380 V, 11 kW Space requirement: 4580 x 1250 x 1330 mm Weight: 3200 kg

Tip height: 250 mm Center width: 1500 mm Circumferential Ø: over bed 500 mm Spindle bore: 56 mm Spindle mount: size 8 Pick-up cone tailstock: 6 MK Spindle speeds: 11.2 - 1400 rpm Feeds: longitudinal/flat 0.027-3.8/0.013-1.9 mm/rev Thread pitches: 0.5 - 36 mm Electrical connection: 380 V, 2 x 5.5 kW Space requirement: 3600 x 1250 x 1300/1600 mm Weight: 3000 kg

Key data: 400 mm, 800 mm

For sale TOS lahe SU80/8000 y.m. 1963/2008 Diameter above the bed: 800 mm Circulating diameter above the slide: 495 mm Distance between centers: 8000 mm Machine dimensions (wxd): 1845x11175 mm Machine cca weight: 10000 kg The lathe has a lot steady rest and DRO ESSA

Workspace Center width 1000 mm Turning diameter over bed 356 mm Circulating Ø over support 220 mm Bed width 206 mm Travel X-axis travel 178 mm Travel Z1 axis 92 mm Bsncqtycvju Swivel range upper slide ± 50° Main spindle Speed range, High 550 1/min - 3000 1/min Speed range, Low 30 1/min - 550 1/min Spindle mount Camlock D1-4 Spindle bore 38 mm Spindle Taper 5 MK Feed Feed X-axis 0.014 mm/rev - 0.206 mm/rev Feed Z-axis 0.043 mm/rev - 0.653 mm/rev Tapping Tapping, Metric (37) 0.4-7 mm Tapping Whitworth (28) 4-56 TPI Tailstock Tailstock quill diameter 45 mm Tailstock cone 3 MK Tailstock quill stroke 120 mm Tailstock transverse adjustment ± 10 mm Drive power Motor power main drive 4 kW Dimensions and weights Dimensions (length x width x height) 1.95 m x 0.75 m x 1.55 m Weight 880 kg

Offer 24178 Specifications: - Center height 250 mm - Center width 2000 mm - larger circulation – Ø over bed 490 mm - via flat sleds approx. 300 mm - Spindle bore 72 mm - Pick-up cone of the tailstock quill MK 5 - Travel of the tailstock quill 260 mm - Spindle speeds 25 - 1160 rpm -Feeds - Travel of the cross slide 200 mm - Travel of the upper slide 115 mm - Drive 380 V / 5.5 kW - with: - Tailstock, 3-jaw lining, bezel - Steel holder, moving center punch, - Chip tray - Space requirement approx. W 3500 x H 1500 x D 1300 mm - Weight approx. 3000 kg

Specifications: Year of construction approx. 1988 Center height 120 mm Center width 430 mm Speed: 60 - 3000 rpm in 18 gear stages Spindle Passage 23 mm Short taper spindle head DIN 55027 Tailstock MK 2 Feeds from 0.03 to 0.15 mm /rev Possible Threads Metric, Inch, Module and Diametrical Pitch Metric thread pitches from 0.25 to 2.5 mm Length 1.2 m, height 1.3 m, depth 0.65 m

Turning diameter 410mm Turning length of 1000mm CE certification proves the best possible safety Complete series in above-ground construction Speed up to 3000rpm Center width 1000mm Turning Ø over bed 410mm Turning Ø over support 255mm Hbcfxifg Turn Ø in Bridge ----- Speed/Steps 50-3000 rpm / Stepless Tailstock mount MK 4 Feed longitudinal 0.025-085mm/rev Feed transverse 0.05-1.7mm/rev Motor 5.5KW

turning diameter over bed: 400 mm turning diameter over slide rest: 245 mm turning length: 800 mm total power requirement: 4.5 kW weight of the machine ca.: 1.25 t required space: 1.96x1.69x1.06 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Swing over the bed: 1250mm Max length of the workpiece: 10000mm Max mass of the workpiece at machining between centres with rest: 10000kg Height of the cutting tool set in tool holder: 50mm

Digital Turning diameter 120 mm Turning length 700 mm Spindle speed 2000 min-1 Tailstock

Key data: 400 , 800 , 1000

Center distance 6000 mm Height of centers 400 mm Max diameter on the bench 800 mm Max diameter on the carriage 520 mm Max diameter in the recess 1100 mm Bar passage 130 mm Undercarriage stroke notes 340 mm TURRET Standard BENCH Max weight between tips 3500 Kg Max weight on steady rests 4500 Kg Pallet width 520 mm TAILSTOCK Steerer diameter 115 mm Steerer stroke 380 mm Cone cm6 HEAD Spindle power 25 Kw Spindle speed 5/1000 Rpm 11" cam-lock spindle attachment Spindle torque 560 Nm GiVi axis display measurements Self-centering 500 Use and maintenance books Yes Wiring Diagrams Yes Protections yes Ready for availability Visible in the warehouse in operation

Key data: 140 mm, 280 mm

Zimas D290V - Lathe Special price € 2,800 instead of € 3,490 excl. VAT - 2-axis position indicator - Stepless speed adjustment with digital display - Plan feed - Camlock mount C4 - Upper slide can be rotated 360° - Tailstock adjustment +/- 5 mm for taper turning Accessories - Undermount with 1x door & 3x drawer - Three-jaw chuck 160 mm with interchangeable jaws - Fixed bezel - Centering tip - Operating tools Specifications Range: - Circumferential Ø over bed: 290 mm - Circulating Ø over cross slide: 180 mm - Turning length between tips: 700 mm - Bed width: 182 mm Headstock: - Spindle bore: 38 mm - Spindle nose: MK5 - Speed levels: infinitely variable - Speed range: 80 - 2000 rpm Feed: - Metric threads: 0.2 - 3.5 mm / 18 steps - Inch thread: 8 - 56 dpi / 21 levels - Longitudinal feed: 0.085 - 0.832 mm - Transverse feed: 0.01 - 0.10 mm Sleds a ...

Center height: 300 mm Center width: 1000 mm Circumferential Ø: over bed 610 mm Spindle bore: 71 mm Spindle mount: size 8 Pick-up cone tailstock: 5 MK Spindle speeds: approx. 11.2 - 1800 rpm Feeds: longitudinal/flat 0.014-16/0.063-7 mm/rev Thread pitches: 0.1 - 112 mm Electrical connection: 380 V, approx. 5.5 kW Space requirement: 2900 x 1450 x 1750 mm

Center height: 400 mm Center width: 1250/1300 mm Circumferential Ø: over bed 440 mm Spindle bore: Spindle holder: Pick-up cone tailstock: 5 MK Spindle speeds: 11.2 - 2240 rpm Feeds: longitudinal/flat 0.1-2.8/0.05-1.4 mm/rev Thread pitches: Electrical connection: 380 V, 11 kW Space requirement: 3400 x 1400 x 1300/1700 mm Weight: approx. 2700 kg

turning diameter over bed: 410 mm turning diameter over slide rest: 240 mm turning length: 1000 mm centre height: 205 mm centre distance: 1000 mm spindle bore: 47 mm spindle turning speed range: 28 - 1250 U/min feeds - longitudinal: 0,03 - 8,8 mm/U feeds - cross: 0,006 - 1,84 mm/U thread - mm pitch: 0,25 - 76 mm thread - inch: 1/2 - 152 Gg/ thread - module: 0,25 - 22 mm bed width: 320 mm tailstock quill diameter: 55 mm tailstock taper MT: 4 face slide travel: 290 mm upper slide travel: 120 mm total power requirement: 5,5 kW weight of the machine ca.: 1,3 t dimensions of machine L x W x H: 2,32 x 1,15 x 1,22 m Accessories: 3-jaw chuck RÖHM 160 mmø, MULTIFIX-head with 2 inserts, solid steady, running center, coolant The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 0360 mm : 215 mm : 1000 mm : 180 mm : 45 mm : 3,75 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 0350 mm : 196 mm : 0650 mm : 170 mm : 42 mm : 7,5 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 0360 mm : 215 mm : 1000 mm : 180 mm : 45 mm : 2,25/3,25 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 0330 mm : 210 mm : 0635 mm : 167 mm : 40 mm : 2,2 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 0390 mm : 240 mm : 1000 mm : 190 mm : 54 mm : 5,5 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 360 mm turning diameter over slide rest: 220 mm turning length: 1000 mm turning diameter in the gap: 380 mm turning speeds: 70 - 2000 U/min centre height: 180 mm spindle bore: 50 mm tailstock quill taper MT: 3 MK connected load frequency: 230 oder 400 V total power requirement: 1,8 kW weight of the machine ca.: 0.65 t dimensions of the machine ca.: 2,0 x 0,8 x 1,56 m Professional industrial machine 3-axis digital display 3-jaw chuck 180 mm. 4-jaw chuck 200 mm. Faceplate 280mm Bezel fixed Bezel rotating 4-fold steel holder. Halogen machine light Machine light Foot brake removable chip tray, chip protection wall Hardened and ground bed rails Complete coolant system Feed protection Machine tools The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Tip height: 250 mm Center width: 2000 mm Circumferential Ø: over bed 500 mm Spindle bore: 50.8 mm Spindle holder: size 6 Pick-up cone tailstock: 5 MK Spindle speeds: 22 - 2000 rpm Feeds: longitudinal/flat 0.05-6.4/0.025-3.2 mm/rev Thread pitches: 80 - 1 mm Electrical connection: 380 V, 5.5 kW Space requirement: 3600 x 1100 x 1500 mm Weight: 1875 kg

Tip height: 205 mm Center width: 1500 mm Circumferential Ø: over bed 410 mm Spindle bore: 47 mm Spindle holder: size 6 Pick-up cone tailstock: 4 MK Spindle speeds: 28 - 1250 rpm Feeds: longitudinal/flat 0.03-1.3/0.008-0.33 mm/rev Thread pitches: 0.25 - 76 mm Electrical connection: 380 V, 3 kW Space requirement: 2800 x 1100 x 1600 mm Weight: 1330 kg

Offer 24177 Specifications: - Tip height 180 mm - Center width 1000 mm - larger circulation – Ø over bed 355 mm - via flat sleds approx. 200 mm - Spindle bore 36 mm - Pick-up cone of the tailstock quill MK 5 - Travel of the tailstock quill 260 mm - Spindle speeds 18 - 1800 rpm -Feeds - Travel of the cross slide approx. 200 mm - Travel of the upper slide approx. 115 mm - Drive 400 V / 5.8 kW - with: - Tailstock, 3-jaw lining, bezel - Steel holder, moving center punch, - Chip tray - Space requirement approx. W 2500 x H 1500 x D 1200 mm - Weight approx. 2100 kg

: 0390 mm : 240 mm : 1250 mm : 190 mm : 54 mm : 5,5 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 250 mm turning diameter over slide rest: 145 mm turning length: 550 mm center height over bed: 125 mm centre distance: 550 mm bed width: 135 mm spindle bore: 26 mm turning speed range - stepless: 50 - 2.000 U/min power requirement: 750 W 3-jaw-chuck diameter: 125 mm taper in tailstock-quill: MK 2 dia. of quill: 30 mm quill stroke: 70 mm voltage: 230 V weight of the machine ca.: 120 kg dimensions of the machine ca.: 1,25 x 0,60 x 0,50 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 420 mm turning diameter over slide rest: 290 mm turning length: 900 mm turning diameter in the gap: mm turning speeds: 40 - 2000 U/min centre height: 210 mm spindle bore: 38 mm total power requirement: 4,0 KW weight of the machine ca.: 0,9 t dimensions of the machine ca.: 2,4 x 1,1 x 1,3 m Lead and feed spindle lathe - 3-jaw chuck 220mm - Quick-change tool holder with 5 cassettes - Steady rest - Chip tray - Operating instructions The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 400 mm turning diameter over slide rest: 280 mm turning length: 1000 mm turning diameter in the gap: mm turning speeds: 70 - 2000 U/min centre height: 195 mm spindle bore: 54 mm tailstock quill taper MT: 3 MK connected load frequency: 400 V total power requirement: 2,2 kW weight of the machine ca.: 0.85 t dimensions of the machine ca.: 1,95 x 1,0 x 1,75 m Professional industrial machine 3-axis digital display 3-jaw chuck 200 mm. 4-jaw chuck 200 mm. Faceplate 280mm Bezel fixed Bezel rotating 4-fold steel holder. Halogen machine light Machine light Foot brake removable chip tray, chip protection wall Hardened and ground bed rails Complete coolant system Feed protection Machine feet Machine tool The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: 420 mm turning length: 1500 mm swing diameter over bed slide: 250 mm Swingdiameter in the bed bridge: 590 mm centre height: 210 mm Turning length in the bed bridge: 260 mm reus: 16 (45-1800) U/min tail stock: MK 4 quill stroke: 120 mm diameter of quill: 50 mm spindle taper: DIN ISO 702-2 Nr. 6 spindle bore: 52 mm spindle cone: MK 6 feed: längs 17 / 0,05 - 1,7 m/min feed: plan 17 / 0,025 - 0,85 m/min total power requirement: 4,6 kW weight of the machine ca.: 1340 kg dimensions of the machine ca.: 2440 x 915 x 1375 mm Fully equipped master and feed spindle lathes. TH 4215 with digital position indicator DPA 21 / 3462070 - Hardened and ground Z-axis guideway - Spindle mount Camlock DIN ISO 702-2 No. 6 - Precisely crafted slide - Hand wheels with adjustable fine scaling 0.04 / 0.02 mm - Quadruple steel holder - All guides can be adjusted using V-ledges - Adjustment range  ...

turning diameter over bed: 400 mm centre height: 195 mm turning diameter over slide rest: 246 mm turning length: 650 mm spindle turning speed - stepless: 0-2500 U/min total power requirement: 7,5 kW weight of the machine ca.: 1,8 t dimensions of the machine ca.: 2x1.3x1.6 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 270 mm turning diameter over slide rest: 130 mm turning length: 500 mm spindle turning speed - stepless: 40-3000 U/min weight of the machine ca.: 1 t dimensions of the machine ca.: 1.5x0.8x1.7 m Digital read-out HEIDENHAIN Misc.accessories www.marcels-maschinen.ch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 360 mm centre height: 170 mm centre distance: 650 mm turning dia. over face-slide: 196 mm spindle bore: 42 mm inner taper MT: 5 spindle turning speed - stepless: 20-3250 U/min weight of the machine ca.: 1,6 t dimensions of the machine ca.: 200 x 125 x 165 cm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Center distance 11,000 mm Turning diameter 730 mm Drill height 500 mm turnable on the bench 1050 mm Motor power 22 kW

Center distance 5,000mm Height of the tips 600mm 105mm bar passage carriage equipped with grinding Machine in very good condition

: 0460 mm : 270 mm : 1500 mm : 230 mm : 76 mm : 11 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Tip width: 430mm Tip Height: 120mm Spindle bore: 23mm Spindle speeds: 60-3000 RPM Short taper spindle head DIN 4 Tailstock MK2 Feeds from 0.03 to 2.5 mm Weight approx. 360 kg New Aikron 3-axis digital display, brake of spindle motor renewed, technically checked. Accessories: Collet device, lathe chuck Quick-change steel holder 

turning diameter over bed: 800 mm turning diameter over slide rest: 860 mm turning length: 6000 mm turning diameter: 800 mm swing diameter over bed slide: 800 mm swing diameter over cross slide guide: 520 mm spindle bore: 71 mm speeds: 11,2 - 1800 U/min volt: 400 V chuck: 315 mm chuck: 630 mm total power requirement: 15 kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 180 mm, 2000 U/min

Built in 1990 Center height 180 mm Turning diameter over carriage 190 mm Center width 1,000 mm Spindle passage 55 mm Max. spindle speed 13-2,000 rpm Spindle drive 7.5 kW Quill stroke 150 mm (MK4) Machine weight 1,650 kg Accessories: Digital display, 3-jaw chuck, quick-change steel holder with 4 inserts, 2 steady rests, coolant device.

turning diameter over bed: 410 mm turning diameter over slide rest: 260 mm turning length: 1000 mm turning diameter in the gap: mm turning speeds: 40 - 2000 U/min centre height: 205 mm spindle bore: 50 mm total power requirement: 4,5 KW weight of the machine ca.: 1,6 t dimensions of the machine ca.: 2,4 x 1,3 x 1,5 m Leadscrew lathe - with copying device - 200mm 3-jaw chuck - 2x Multifix quick-change tool holders - Live center - Machine light - Chip tray The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

L + Z lathe COLCHESTER / HARRISON type Student 1800Masch. No. 4/0023/08817 Year of construction approx. 1985Center width 635 mmTurning diameter over bed 330 mmTurning diameter over face slide 210 mmCenter height over bed 165 mmCenter height over face slide 105 mmSpindle bore 42 mmFeed longitudinal and planeChuck intake Short taper DIN 55029 D1-4 Camlock 63 mmTailstock inner taper MK 3Quill adjustment 110 mmSpindle speed 22 - 1800 rpm. 16 stepsDrive power 2.2 kWWetz connection

L + Z Lathe WEWAG Model 250 / 1500Fabr. No. 20953 Year of construction approx. 1975Center width 1500 mmNominal turning diameter over bed 500 mmTurning diameter over bed max. 510 mmCenter height over bed 255 mmTurning diameter over support 300 mmCenter height over support 150 mmSpindle bore 56 mmSpindle speed 18 - 1800 rpm. 24 stepsRotary chuck mount short taper DIN 55022Tailstock inner taper MK 5Drive power 4 kW and 6.7 kW pole-switchable- 3-jaw lathe chuck BISON, 250 mm-