lathe conventional used for sale

Swing diameter over bed/cross slide: 700mm/430mm, turning length: 4000mm, spindle bore: 80mm, speed: 1500rpm, bed width: approx. 550mm. Machine dimensions X/Y/Z: approx. 6300mm/1350mm/2000mm, weight: approx. 5700kg. An on-site inspection is possible.

Swing diameter over bed/cross slide: 650mm/430mm, distance between centers: 3000mm, bed width: 450mm, max. workpiece weight: 1800kg, spindle speed: 2000rpm, rapid traverse: 8m/min, feed rate: 2m/min, quill diameter: 105mm, quill stroke: 225mm, taper: MK5, tool stations: 8. Machine dimensions X/Y/Z: approx. 5300mm/2300mm/2200mm, weight: approx. 7000kg. Documentation available. An on-site inspection is possible.

turning diameter: 555 mm turning length: 3000 mm control: Monforts Control System type: MTC-K CCUO turning diameter over slide rest: 290 mm cross movement: . mm spindle passage: . mm turning speeds: 1600 U/min transmission ratio: . quill stroke: . mm rapid traverse: . m/min main drive motor: . kW 3-jaw chuck: Rotha-S Plus 3-jaw-chuck diameter: . mm total power requirement: . kW weight of the machine ca.: . t dimensions of the machine ca.: . m Serial number: 262/01 Machine number: 08122394 Quick-change tool post Coolant system Monitor Chip conveyor The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are ...

Universal lathe, little used Model: SN 710S x 1500 Make TRENS SK Accessories: Digital Display 4 Jaws Face Plate Coolant tank

Key data: 554 mm, 2000 mm

Turning length: 2,000 mm Turning diameter: 554 mm above bed 370 mm over cross slide Spindle bore: Ø 104 mm Spindle speeds: 2,000 rpm 3-jaw chuck: Schunk Ø 350 mm Camlock Control: GE Fanuc Equipped with: - 1x Fixed bezel Ø 245 mm - 1x Fixed bezel Ø 390 mm - 18 Ready tool containers - Various jaws for food - Centering tips - Cooling system -Operating instructions Country of origin: UK Motor power: 7.5 kW Machine LxWxH: 410 x 200 x 175 cm Machine weight: 3600 kg

For sale Mori Seiki CNC lathe type DL-15 in good condition. Equipped with 2 x 12 positions turret and left and right spindle. Maximum speed 6,000 rpm of both spindles. Fanuc MSC-516 control. Chip conveyors and bar feeders. Still in good condition and still under power, subject to prior sale

Manufacturer: Pinacho Model: Smart Turn 6/180 Power: 7.5 kW Frequency: 50 Hz Control: FANUC CAPACITY • Center height: 180 mm • Center width: 750–1000 mm • Permissible diameter over bed: 360 mm • Permissible diameter over longitudinal slide: 335 mm • Permissible diameter over cross slide: 198 mm • Bed width: 250 mm SPINDLE • Spindle bore: 42 mm • Spindle nose: CAMLOCK no. 5 (DIN 55027 no. 5) • Spindle taper: Morse taper no. 4 • Number of spindle speeds: 1 • Cutting speed (constant surface speed): 0–4000 U/min FEED • Working feed Z,X (mm/min): 0–10000 mm/min • Rapid traverse Z,X (m/min): 10 m/min TAILSTOCK • Tailstock quill diameter: 58 mm • Tailstock quill travel: 200 mm • Tailstock taper: Morse taper no. 3 MOTORS • Main motor power: 5.5 kW • Feed force longitudinal (N): 4500 N • Feed force cross (N): 3500 N • Cool ...

Center height: 210mm, distance between centers: 1500mm, swing over bed: 420mm, spindle bore: 57mm, speed range: 38–2000/min, main drive: 7.5kW, weight: 2t. Equipment: 3-jaw chuck, tailstock, steady rest, quick-change tool holder, coolant system, lighting, year of manufacture: approx. 1980–1985. No data sheet, fully functional, well maintained, ready for immediate use. Only slight oil moisture in the lower area due to age, without relevant oil loss. An on-site inspection is possible.

Travel X/Z: 210mm/610mm, Travel Y: +/-40mm, Swing over cross slide: 360mm, Spindle bore: 65mm, Tool stations: 12, Tool holder: VDI30, Speed: 4000rpm, Rapid traverse: 24m/min, Feed force: 5000Nm. Machine dimensions X/Y/Z: approx. 4000mm/2500mm/2500mm, Weight: approx. 6000kg, Control: Siemens Sinumerik 810D, Operating hours: 4894h. Including oil cooler, parts catcher, power chuck Kitagawa BB08, collet device, turning tool holders and boring bar holders. Documentation available. An on-site inspection is possible.

The following used CNC vertical lathe EMAG VL2 is for sale. Manufacturer: EMAG Type: VL2 Year of Make: 2014 Weight: 6000 kg Description: It is a reliable EMAG VL2 CNC vertical lathe, ideal for precision machining of small and medium-sized parts. The machine is in good technical condition, has been regularly serviced and is ready for immediate use. The machine is suitable for both one-off and series production.

Inv. Num. : 8761 Type: VDF Producer: Heidenreich & Harbeck Generated: Parameters: Maximum turning length: 1500 mm Equipment: Digital measurement

turning diameter: 890 mm turning length: 3000 mm turning diameter over slide rest: 550 mm control: Fagor 8055i ATC Revolver: 8 tail stock: MK 6 turning dia. in gap: 1220 mm length of gap: 450 mm spindle passage: 106 mm turning speeds: 15-1480 U/min 3-jaw chuck: 400 mm steady: 300 mm chip conveyor: The tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad was creat ...

turning diameter: 475 mm turning length: 1500 mm control: Fagor 8055T Revolver: 8 turning diameter over slide: 240 mm turning dia. in gap: 710 mm length of gap: 350 mm spindle passage: 51 mm turning speeds: 100-4500 U/min Power: 7/11 KW 3-jaw chuck: 250 mm steady: 230 mm The tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with ModulMWS - the softw ...

turning diameter over bed: 600 mm turning diameter over slide rest: 400 mm turning length: 2000 mm hollow: 82 mm turning diameter: 600 mm turning dia. in gap: 800 mm length of gap: 400 mm turning speeds: 2000 U/min 3-jaw chuck: 250 mm steady: 210 mm with live steady: 200 mm Holder Multifix: coolant: The tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad was cr ...

Manufacturer: Index Model: G 400 Find more here - / Contact us at -

Conventional precision lathe WEILER "CONDOR VC" With 3 axis digital display Siemens Year of Make: 2012 Spindle bore: 56 mm Center width: 800 mm Circumference Ø over bed : 205 mm Speed range: 30 – 3500 rpm With the following accessories: Multifix Tool Holder Chip backsplash wall with interior lighting Coolant Setup 3 jaw chuck 0 200 mm Feed protection Moving Lynette 0 approx. 150 mm Tailstock with extendable drill quill Operating instructions

Universal CNC lathe INDEX G 400 RATIO Line Hersteller [manufacturer]: INDEX Type [ type]: G 400 Control unit: Siemens C200-4D incl. milling of cylindrical tracks Incl. handwheel Baujahr[construction year]: 10/2004 Turning length 1250 Main spindle D102 with swing-in gear 1700 Nm Size 11 Hollow Clamping Cylinder 102 ARB-SPI ALIGNMENT. AND SWITCHING DEVICE TOOL CARRIER 1 COMPL. AXES X,Y,Z,B with turning/milling operation Disc turret VDI40 10 stations MILLING SPINDLE HSK A63 Tool carrier axles 2 XZ Disc turret VDI40 10 stations SUB-SPINDLE D102 DIRECT DRIVE 1300Nm Size 11 Hollow Clamping Cylinder 102 ARB-SPI ALIGNMENT. AND SWITCHING DEVICE DISC MAGAZINE ON THE LEFT OF THE HSK63 SINGLE-SWING GEARBOX WITH 32 TOOL HOLDERS DISC MAGAZINE RIGHT COMPL. M.32 TOOL HOLDERS HSK 63A Travel path: X= 320mm Z=1250mm Displacement measuring system X-axis glass mast. (abs) Fe ...

Manufacturer: Gildemeister Model: NEF 320 Type of Machine : Lathe Voltage: 400 V (primary), 230 V (secondary) Power: 14 kVA Machine is fully functional Find more here - / Contact us at -

Two identical CNC lathes Scherer Feinbau are available. Swing diameter: 200mm, travel path X/Z: 240mm/280mm+515mm, max. workpiece height: 100mm, spindle nose taper: A4, spindle power: 7.6kW, spindle torque: 60Nm, speed: 8000rpm, travel speed X/Z: 60m/30m/min. Weight: approx. 5500kg, control: Siemens Sinumerik. Documentation vorhanden. An on site inspection is possible.

Key data: 900 mm, 5000 mm

Sony Digital read out 2 axis Taper Turning attachment Steady rest 4 pcs 3 jaw chuck selfcentering 4 jaw chuck independent Coolant system

Spindle bore: 42mm, max. workpiece diameter: 115mm, speed: 3150rpm, power: 9kW, bar length: 5200mm. Machine dimensions X/Y: approx. 2100mm/1000mm, weight: approx. 1500kg. Including bar feeder Stamag D 5000 and various accessories such as collets and feed collets. Documentation available. An on site inspection is possible.

control: 840D-PCU 50 V1 : 3 coolant: ja chip conveyor: ja kW generator - rated current: 110 A connected load: 56 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

A mint-condition 2-axis precision lathe Knuth is available. Turning diameter over bed/support/without bridge: 800mm/570mm/1035mm, max. workpiece length: 1500mm, bed width: 400mm, travel X/Y: 420mm/230mm, top slide swivel range: 70°, speed: 1600rpm, spindle bore: 105mm, rapid traverse X/Z: 2m/4m/min, quill diameter: 90mm, quill stroke: 235mm. Machine dimensions X/Y/Z: approx. 3250mm/1150mm/1950mm, weight: approx. 3300kg. Documentation available. An on-site inspection is possible.

Lathe SARO SP 1250x3000, working condition

Center height: 230mm, center width: 1500mm, swing diameter over bed/cross slide: 475mm/260mm, max. workpiece weight: approx. 500kg, spindle diameter: 1000mm, spindle bore: 62.5mm, max. chuck diameter: 250mm, travel X/Z: 1330mm/280mm, rapid traverse X/Z: 8m/4m/min, speed: 3150rpm. Machine dimensions X/Y/Z: approx. 3400mm/2000mm/1600mm, weight: approx. 3300kg, control: Bosch CC 200T. Documentation vorhanden. An inspection on site is possible.

Parallel Lathe CAZENEUVE HB 575 Between points: 2000 mm Maxi Ø on bench: 575 mm Maxi Ø over saddle: 300 mm Spindle diameter: Ø 51 mm Spindle speed: from 20 to 1600 RPM Multifix Turret 3-jaws chuck Ø 250 mm Spindle motor: 8,8 kW Threadings: Metric + Whitworth Tailstock CM5 Scale 2 axes Lubricant pump 3 points fixed steady - Max Ø 160 mm Voltage: 380 V Dimensions (L x W x H): 3500 x 1500 x 1800 mm Weight: approx 3 T

A CNC multi-spindle lathe Schütte is available. Number of spindles: 6, cross slides: 2, bar length: 3000mm, max. bar diameter: 20mm, max. square material side size: 14mm, max. hexagonal material side size: 17mm, max. turning length: 40mm, speed: 5000rpm. Machine dimensions X/Y/Z: approx. 3150mm/1050mm/2000mm, weight: approx. 4000kg. Including loading magazine, all collets and accessories. Documentation available. An on-site inspection is possible.

We offer in the context of an insolvency liquidation: 2 x CNC lathe ( 1 x sub-spindle ( 1 x lower turret ), used + Bar feeder + Accessories 1 . CNC lathe with sub-spindle Make : MIYANO Type : BNC 34-S Year of construction : 1989 Control : Fanuc 0-T - Bar feeder HYDROBAR - 2 x collet chuck - 1 x 3 - Cheek chuck 2. CNC lathe with 2 x turret Make : MIYANO Type : JNC 45-T Year of construction : 1989 Control : Fanuc 0-T Bar Feeder HYDROBAR - 1 x collet chuck - 1 x 3 - Cheek chuck 3. Accessories - Approx. 65 x collet - Approx. 40 x Baking Sets - Various tool holders + tools -Documentation The machines are untested, but they were in use until the end. Sales are made ex site, loading can take place at an additional cost.

Inv. Num. : 8852 Type: SKJ 8 CNC Producer: TOS Created: GO 2006 Parameters: Control system: MEFI CNC 859 Table diameter: 780 mm Motor power: 40 kW Max. workpiece diameter: 1050 mm Max. workpiece height: 630 mm Max. workpiece weight: 2000 kg Weight: 9000 kg Equipment: Ant electric drives

turning diameter: 1600 mm turning length: 6200 mm control: Siemens type: Sinumerik turning diameter over slide rest: 1300 mm transmission ratio: . 3-jaw chuck: Schunk Rota Plus 3-jaw-chuck diameter: 630 mm bed width: 750 mm live tooling: steady: 1200 mm steady: 670 mm steady: 408 mm total power requirement: . kW weight of the machine ca.: . t dimensions of the machine ca.: . m Serial number: 262/01 Machine number: 08122394 Quick-change tool post Coolant system Monitor Chip conveyor The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your busines ...

CNC vertical lathe Type: SKIQ 12 CNC Manufacturer: TOS Control: Mefi Clamping plate diameter: 1250 mm Maximum turning diameter: 1700 mm Maximum workpiece height: 1335 – 1785 mm Maximum workpiece weight: 12000 kg Clamping plate speed: 2.5 – 500 rpm Main motor power: 40 kW Tool magazine: 15 positions Slide stroke (Z): 1000 mm Vertical crosshead movement: 800 – 1250 mm Slide dimensions: 180 × 200 mm Dimensions: 6100 × 5050 × 5255 mm Machine weight: 27000 kg In good condition, under power Find more here - / Contact us at -

A combined vertical CNC turning and cylindrical grinding center EMAG is available. Chuck diameter: 250mm, max. swing diameter: 260mm, travel X/Z: 680mm/200mm, rapid traverse X/Z: 45m/min/30m/min, grinding spindle speed: 45000rpm, tool stations: 12, basket dimensions X/Y: 400mm/600mm, basket stack: 3. Machine dimensions X/Y/Z: approx. 3200mm/1900mm/2650mm, weight: approx. 8000kg, control: Siemens 840DS, operating hours: approx. 35000h, program hours: approx. 22000h. Documentation available. An on-site inspection is possible.

CNC vertical lathe Type: SKJ 12 NC Manufacturer: TOS Control: Mefi Max workpiece diameter: 1400 mm Clamping plate diameter: 1250 mm Maximum workpiece height: 1150 mm Maximum workpiece weight: 6000 kg Clamping plate speed: 2.5 - 225 rpm Main motor power: 37 kW Machine weight: 13000 kg In good condition, under power Find more here - / Contact us at -

turning diameter over bed: 1200 mm turning diameter over slide rest: . mm turning length: 5000 mm digital readout: Digitalanzeige centre height: 600 mm : 55 PS spindle turning speed range: 5-1000 U/min Rapid movement: längs 4000 mm/min accessories:: Futter, Planscheibe accessories:: Stahlhalter, Lynetten Weight without Lynette: zwischen Spitzen 8000 kg Weight with Lynette: zwischen Spitzen 11500 kg Rapid movement: quer 2000 mm/min total power requirement: kW weight of the machine ca.: ca. 20 t dimensions of the machine ca.: m The tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling ...

SEDIN 1512 vertical lathe YOM 1987 Table diameter 1120 mm Max. turning diameter 1250 mm Max. workpiece height 1000 mm Max. workpiece weight: - 3200 mm (5…80 rpm) - 1000 mm (250 rpm) Main motor power 30 kW Installed power 37 kW Dimensions L/W/H 2750/2975/4100 mm Weight 16000 kg

Distance between centers: 500mm, center height: 140mm, turning diameter over bed/cross slide: 295mm/155mm, spindle bore: 36mm, speed: 3550rpm, tailstock taper: MK3. Machine dimensions X/Y/Z: approx. 1500mm/800mm/1250mm, weight: approx. 700kg. On site inspection is possible.

A conventional precision lathe Weiler is available. Distance between centers: 650mm, center height: 160mm, swing diameter over bed/faceplate: 320mm/190mm, spindle bore: 43mm, speed: 2500rpm, quill diameter: 40mm, quill travel: 85mm. Machine dimensions X/Y/Z: approx. 1800mm/900mm/1600mm, weight: approx. 1050kg. An on-site inspection is possible.

A lathe (Universal Turning Solution) is offered, control: Fanuc, tool turret: 12-station, tailstock, 3-jaw chuck. Tool setting arm: Renishaw HPRA. Inspection is possible by arrangement.

turning diameter: 1010 mm turning length: 6000 mm control: Siemens type: Sinumerik 840D turning diameter over slide rest: 650 mm 3-jaw chuck: Schunk Rota Plus 3-jaw-chuck diameter: 500 mm bed width: 750 mm steady: 820 mm Rotating speeds: 1100 U/min length of gap: 500 mm steady: 450 mm spindle passage: 104 mm workpiece weight: 7000 kg main drive: 52 kW turning speeds: 5-900 U/min total power requirement: . kW weight of the machine ca.: . t dimensions of the machine ca.: . m Serial number: 262/01 Machine number: 08122394 Quick-change tool post Coolant system Monitor Chip conveyor The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessorie ...

turning diameter: 1010 mm turning length: 6000 mm control: Siemens type: Sinumerik 840D turning diameter over slide rest: 650 mm 3-jaw chuck: Schunk Rota Plus 3-jaw-chuck diameter: 500 mm bed width: 750 mm steady: 450 mm Rotating speeds: 1100 U/min length of gap: 500 mm steady: 450 mm spindle passage: 104 mm workpiece weight: 7000 kg main drive: 52 kW turning speeds: 5-900 U/min live tooling: total power requirement: . kW weight of the machine ca.: . t dimensions of the machine ca.: . m Serial number: 262/01 Machine number: 08122394 Quick-change tool post Coolant system Monitor Chip conveyor The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items ...

Manufacturer: INDEX Model: V200 Year of Manufacture: 2001 Type of Machine : Automatic lathe with workpiece loader from Schmid Electrical Specifications: Power Supply: 3 Phase Frequency: 50 Hz Rated Voltage: 400 V Control Voltage: 24 V Rated Current: 66 A Power Rating: Rated Power: 31 kW Weight: Control Cabinet Weight: 440 kg Machine Weight: 3,300 kg Find more here - / Contact us at -

A CNC lathe Gildemeister is available. Swing diameter over bed/face slide: 600mm/360mm, bed dimensions X/Y: 350mm/450mm, carriage length: 620mm, carriage width: 250mm, facing travel: 1100mm, chuck diameter: 315mm, spindle bore: 107mm, spindle diameter: 140mm, spindle power: 30kW, torque: 950Nm, speed: 3150rpm, rapid traverse X/Z: 10m/min/5m/min. Quill diameter: 100mm, quill stroke: 180mm, max. tailstock pressure: 1200daN, turning length: 1000mm. Machine dimensions X/Y/Z: approx. 4350mm/2050mm/2000mm, weight: approx. 6400kg, operating hours: 49811h. Documentation available. An on-site inspection is possible.

CONTROLS   CNC controls FANUC 32I-MODEL B - MANUAL GUIDE I BASIC FUNCTIONS   number of spindles: 1   number of turrets: 1   live positions: yes WORKING RANGE TURNING   turning diameter (max): 530 mm   bar diameter (max): 117 mm   worpiece length max.: 500 mm MAIN SPINDLE   spindle revolutions (max): 2000 /min   drive power: 37 kW   spindle torque: 3073 Nm X/Z SLIDE   number of tool positions (total): 12   number of live positions: 12   - rotation speeds (max): 4000 /min   - drive power: 7.5 kW ATTACHMENTS (TURNING)   chip conveyor: yes • Programmable tailstock MK#5• Main spindle with 2-stage gearbox• Tooleye• Chip conveyor• High-pressure pump, 20 bar• 3-jaw chuck, diameter 380 mm• Tool breaka ...

For sale Emco CNC double spindle lathe type Hyperturn 45. A very complete CNC lathe with left and right spindle, as well as an upper and lower turret. Both turrets have driven tool positions! The upper turret also has a Y-axis with 70 mm travel. Tool holder attachment VDI25, rod capacity left spindle is Ø 45 mm, maximum speed 7,000 rpm. Maximum diameter is Ø 300 mm. Maximum part diameter is 480 mm. The distance between the two spindles is 720 mm. Fanuc 18i-TB control. The machine is equipped with high pressure pump, chip conveyor with right ejection, parts catcher, manual collet devices, etc. Available from stock, subject to prior sale. The machine has a light layer of soot. This can be easily removed.

Turning diameter: 120mm, turning length: 400mm, travel X/Z: 400mm/400mm, spindle bore: 42mm, speed: 8000rpm, chuck diameter: 150mm, tool stations: 12, tool interface: VDI 20. Machine dimensions X/Y/Z: approx. 2500mm/1400mm/1700mm, weight: approx. 2500kg. Documentation available. On-site inspection is possible.

General Manufacturer: Citizen Type: Cincom R 07 VI Year of Make: 2012 Control: Citizen Cincom Number of axles: 6 Turning diameter: 7 mm Turning length: 40 mm Thread diameter: 4 m Spindle passage: 12 mm Spindle Speed: 0 – 16,000 rpm Spindle power: 1.1 kW Sub-spindle Speed: 0 – 10,000 rpm Pick-up length: 40 mm C-axis: 1° Tapping diameter: 3 m Tool Carrier Quantity: 2 Number of stations: 13 Turning tools: 5 Drilling tools: 4 Tool shank cross-section: 8 mm Counter-processing Number of tools: 4 Drive Connection 50 Hz 3x: 400 Volts Sub-spindle power: 0.5 kW Total power requirement: 4 kVA Dimensions and weight Dimensions: 1,465 mm x 560 mm x 1,410 mm Weight: approx. 950 kg Condition Condition: Used Functional: Tested and fully functional Other equipment and accessories included: Pneumatic workpiece extraction LNS Tryton 112 Rother mini ...

Offered is a CNC lathe (sub-spindle, milling/C-axis, Y-axis). Equipped with bar feeder for balls 120mm, incl. Fanuc six-axis robot M-16iB with R-30iA control for automated loading and unloading as well as a bunker for raw material supply. Machine is operational. Inspection possible by prior arrangement.

Center height: 180mm, swing diameter over bed/cross slide: 360mm/190mm, distance between centers: 750mm, speed: 1250rpm, machine dimensions X/Y/Z: approx. 2800mm/1000mm/1300mm, weight: approx. 1750kg. An on-site inspection is possible.

Offered is a lead and feed screw lathe. Swing diameter over bed 710mm, over carriage 480mm. Distance between centers 1000mm. Spindle bore 71mm. Speeds 18-800rpm (12 steps). Motor power 7.5kW. Machine weight approx. 3070kg. Equipped with Heidenhain digital readout, chip protection wall, splash guard, coolant system, and four-position tool post. Repaired and inspected prior to storage. Inspection possible by prior arrangement.

turning diameter: mm turning length: mm control: 0 total power requirement: kW weight of the machine ca.: t required space: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.