lathe cnc used for sale

Additional technical specifications: • Center height over support: 80 mm • Center height over bed: 150 mm • Center Length: 450 mm

Equipped with chuck Forkardt; chuck diameter: 250 mm; equipped with digital reading unit; tailstock mount: MK4; machine is technically in good condition Auction-ID: A1-49785-11

Chuck diameter : 125 mm; tailstock holder MK2; machine is technically in good condition Auction-ID: A1-49785-5

Consisting of 2 x base body 150 x 150 mm; Including 6 type B chisel holders, length approx. 118 mm; unused Auction-ID: A1-49785-97

Equipped with frequency control and digital readout unit; including chisel support; tailstock mount: MK3; machine is technically in good condition Auction-ID: A1-49785-1

Consisting of 2 x base body 130 x 130 mm; Including 7 type B chisel holders, length approx. 118 mm; unused Auction-ID: A1-49785-96

Parallel Lathe CAZENEUVE HB 500 Between points: 1000 mm Maxi Ø on bench: Ø 500 mm Maxi Ø over saddle: Ø 190 mm Spindle diameter: Ø 42 mm Spindle speed: from 20 to 1600 RPM Turret: MULTIFIX type B 3-jaws chuck Ø 215 mm Threadings: Metric + Whitworth Tailstock: CM5 Scale: 2 axes NEWALL Recent electrical panel Supplied with 1 tool holder + 1 set of jaws Lubricant pump Voltage: 380 V Dimensions (L x W x H): 2500 x 1400 x 1600 mm Weight: approx 2 T

General Description Conventional vertical turning lathe manufactured by POLYMETA C LTD in Sofia, Bulgaria. Model SEDIN 1512 , designed for machining large cylindrical workpieces, rings, flanges, wheels and similar rotational parts. The machine layout matches the SEDIN 1512 family. Technical Details Manufacturer: POLYMETA C LTD Model: SEDIN 1512 Type: Vertical Turning Lathe (VTL) / vertical turret lathe Year of refurbishing: 2001 Factory No.: 3524 Control: Conventional (manual) Condition: Used Condition Good industrial used condition. The machine appears complete and installed in production. Ways and machined surfaces look clean, handwheels and graduations show limited wear, and fresh lubrication is visible. The tool slide appears in good condition, with no obvious crash damage. Normal cosmetic paint wear and age-related wear are visible. Spindle accuracy and gearbox condi ...

turning diameter over bed: 2300 mm turning diameter over slide rest: 1100 mm turning length: - mm faceplate: 2000 mm centre height: 1180 mm max. workpiece weight -without tailstock: 4 t spindle diameter in front bearing: - mm spindle turning speed range: 1- 99,9 U/min feed: 0,06 - 19,98 mm/U rapid traverse: 2,3 m/min total power requirement: 37 kW weight of the machine ca.: - t dimensions of the machine ca.: 5,2 x 5,8 x 2,63 m equipped with: - face plate - Bed support with 4-point Tool Holder - Coolant system - Feed/chip guard The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

faceplate diameter: 4500 mm swing diameter: 6000 mm turning height: 3500 mm Control: Siemens 840D distance between columns: 6500 mm column: max. travel: 19000 mm table load: 63 tons table rotation speed: 0,63 - 63 U/min cross-rail support horizontal: 7500 m/min cross-rail support vertical: 2500 m/min clamping table: 8000 x 5000 x 350 mm table load capacity: 25.000 kg/qm ram head dimension: 460 x 380 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m GANTRY – Double-column milling and turning centre with movable column Retrofitted and modernised in 2009 - Siemens 840D CNC control - Drilling and milling unit, speeds 25 – 2,500 rpm - Workpiece table 8,000 x 5,000 mm - Rotary table/face plate 4,500 mm - Angular milling head The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

faceplate diameter: 5000 mm swing diameter: 5500 mm turning height: 3500 mm max. ram stroke: 1800 mm faceplate turning speed range: 0,5 - 50 U/min workpiece weight: 20 t feed per revolution: 0,056 - 4,25 mm rapid traverse: 2 m/min Control: Sentrol total power requirement: - kW weight of the machine ca.: - t - Sentrol CNC control system - Faceplate - 2 vertical ram supports The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Manufacturer: ČKD Blansko Model: SK 25 A Year: 1960 Condition: Used Stock number: 9539 Max. turning diameter: 2500 mm Clamp plate diameter: 2400 mm Maximum workpiece weight: 14000 kg Max. workpiece height: 1600 mm Weight: 47000 kg

Manufacturer: TOS Model: SKIQ 8 Year: 1960 Condition: Used Stock number: 9540 Clamp plate diameter: 800 mm Max. workpiece height: 700 mm Max. workpiece weight: 2500 kg Weight: 16000 kg

Technical data Manufacturer: WOHLENBERG Type: V1250 Year of Make: 1980 Serial Number: D4195 Grinding length: 8,000 mm Spindle Passage: 100 mm Face plate: Ø 1,000 mm Control: Siemens Sinumerik PLC Configuration Tailstock Bezel Face Plate Control panel with touchscreen Suction Auction-ID: A7-50461-28

Precision lathe, lathe, lead screw lathe, lead screw lathe -Manufacturer: OMAP, Lead screw and feed screw lathe type Al.Pin 180 -Turning length: 1600 mm -Turning diameter over bed: 410 mm -Turning diameter without bed: 570 mm -Turning diameter over support: 230 mm -Spindle bore: Ø 53 mm -Spindle speeds: 12 - 1650 rpm -Three-jaw chuck: Röhm Ø 250 mm -Tailstock mount: MK3 -Drive: 2.2 kW -Accessories included, see photos -Dimensions: 2670/900/H1355 mm -Weight: 1460 kg

Spindle Passage 120 mm Three jaws, chuck fork type 250mm Multi ix Type B Tapping device Electrical feed in upper support Tailstock Quill Stroke 200mm The machine was electrically and mechanically overhauled and equipped with an emergency switch and spindle chip protection The machine has run for 5572 hours since then Accessories: Once closed Lynette Two center number carriers Auction-ID: A1-50529-7

Lead and pull spindle lathe - 3-jaw chuck 200mm - Quick-change steel holder - Bezel - Machine light - Chip tray - Center punch tip Turning diameter over bed 480 mm Turning diameter over support 260 mm Turning length 1500 mm Turning diameter in the offset - mm Speed 90 - 1120 rpm Center height 240 mm Spindle bore 52 mm Total power requirement 7.5 KW Machine weight approx. 2.3 t Dimensions approx. 3.0 x 1.3 x 1.5 m Auction-ID: A7-50523-734

Guide and tension spindle lathe - Digital display - 3-jaw chuck 160 - Spare jaws - Coolant system - Multifix steel holder - 4 pcs. Multifix holder - Steady rest - Moving center punch- Chip pan - Chuck protection Turning diameter over bed 350 mm Turning diameter over support 216 mm Turning length 1000 mm Turning diameter in the offset 550 mm Speed 40 - 1800 rpm Center height 170 mm Spindle bore 40 mm Total power requirement 4.0 KW Machine weight approx. 0.7 t Space requirement approx. 2.0 x 0.85 x 1.6 m Auction-ID: A7-50523-811

engine lathe, year 2007, CNC 8055 TC. Used machine. More info & price on IndustrialBuyer.

DMG Gildemeister CTV 160Year of manuf. : 2016 Control : Siemens Sinumerik ____________Description:General:Year of construction:2016Control:Siemens SinumerikChuck diameter:170 mmSwing diameter:240 mmTravel X/Z:720 / 300 mmSpindle:Speed:6,000 rpmChuck:3-jaw chuck SMW Autoblok KNCS-N 170-43Tool carrier:Technology:Turret, 12 stationsTool holder:VDI 40Driven tool holders:YesAutomation:Technology:Integrated workpiece storageFeatures / Accessories:Chip disposal:Chip conveyorCoolant filtration:KNOLL band filter system (type 240 S-1)Fire protection:Kraft & Bauer argon extinguishing system

SCHAUBLIN 102N-80 ist eine Mechanikerdrehbank, ausgelegt für Präzisionsbearbeitung mit hoher Genauigkeit und Zuverlässigkeit. Spitzenhöhe 102 mm; Spitzenweite 450 mm; Drehdurchmesser über Planschlitten 120 mm, über Bett 200 mm; Spindelbohrung 25 mm; Spannzangenaufnahme W25. Spindel 24 Stufen 45–3100 t/min; Steigung Leitspindel 4 mm, Durchmesser 40 mm; Reitstockkegel 2 CM; Vorschübe 8 Stufen, längs ab 0,020 mm/U; Anschluss 3x380 V 50 Hz; Spindelmotor 1,50 CV; Gewicht ~550 kg; Abmessungen L1375×B670×H1210 mm. Zubehör: Schnellwechselhalter TRIPAN, Bohrreibstock, 2 Schubladen. Erreicht enge Toleranzen; Einsatz in Automotive, Uhrenbau, Werkzeugbau, Luftfahrt, Medizintechnik. Technische Daten ohne Gewähr

SCHAUBLIN 102-80 ist eine Werkzeugmacherdrehbank, ausgelegt für präzise Bearbeitung mit hoher Genauigkeit und Zuverlässigkeit. Bearbeitungsfähigkeiten: Spitzenhöhe 102 mm, Spitzenweite 300 mm, Drehdurchmesser über Planschlitten 120 mm, über dem Bett 200 mm, Spindelbohrung 25 mm. Technische Hauptdaten: stufenloser Drehzahlbereich von 55 bis 3000 t/min, Reitstockaufnahme 2 CM, Anschluss 3x 380 V 50 Hz, Spindelmotor 1.5 CV, Maschinengewicht ca. 450 kg; Abmessungen L 1200 mm x B 600 mm x H 1400 mm. Zubehör: Bremse, Lampe, Schnellspanneinrichtung, Bohrreitstock, Bohrfutter, Schnellwechselstahlhalter. Erreicht enge Toleranzen; typischer Einsatz in Automotive, Uhrenindustrie, Werkzeugbau, Luftfahrt und Medizintechnik. Technische Daten ohne Gewähr

Already disassembled Auction-ID: A1-50076-6

Includes: collet system, 3-jaw chuck. Auction-ID: A1-50076-1006

Workshop cabinet incl accessories lathe chucks and tool holders Auction-ID: A1-50076-280

already disassembled, including cabinet with accessories Auction-ID: A1-50076-5

Cabinet with lathe accessories including chucks and chisel holders Auction-ID: A1-50076-279

Workshop cabinet 7 drawers with lathe accessories Auction-ID: A1-50076-290

HDM 1000 wood lathe, announced capacity of approximately 100 cm between points, sold with a large set of accessories. The set includes a wooden workbench with storage drawers, several turning scissors and gouges, various accessories and a Tormek SuperGrind 2000 water grinder with accessories. Set for wood turning, shaping and finishing work. Used equipment. Auction-ID: A3-46129-39332

Already disassembled Auction-ID: A1-50076-10

With 3 claw, 4 claw, tool holders, machine feet Auction-ID: A1-50076-1001

faceplate diameter: 5000 mm swing diameter: 8000 mm turning height: 4000 mm ram head dimension: 360 x 360 mm faceplate turning speed range: 0,6 - 60 U/min workpiece weight: 160 t main drive motor: 2x 70 kW control: FANUC total power requirement: - kW weight of the machine ca.: 85 t dimensions of the machine ca.: -- m The machine will be overhauled and modernised (upon order) and fitted with: - Fanuc CNC control system (latest model) - New electrical system - New hydraulic components: pumps, lubrication systems, hoses, valves, etc. - All assemblies and sub-assemblies will be cleaned, inspected and replaced where necessary. - 2 rams supports on the crossbeam CROSS-RAIL TOOL HEAD (ARM TOOL CARRIAGE) - Axial ram travel (Ram stroke) — 2500 mm - Horizontal carriage travel — 3400 mm - Swivel angle / Tiltability — 15 - 45° - Cross-rail travel (Arm travel) — 3600 mm - Saddle travel —  ...

faceplate diameter: 4000 mm swing diameter: 4300 mm turning height: 2060 mm workpiece weight max.: 18000 kg faceplate turning speed range -stepless-: 1,02 - 92 U/min rapid traverse of cross-rail: 2500 mm/min slide adjustment: 2400 mm main drive motor: 60 kW Control: Fanuc 0iTF total power requirement: 75 kW weight of the machine ca.: 62,8 t dimensions of the machine ca.: 6,6 x 5,8 x 5,4 m Overhauled/modernized in 2026 - Complete replace of hydraulic & lubrication installation - New ball screws installed - Replace of electric installation and of command - Mechanical elements retrofitted and grinding of guideways (adjustment of the geometrical parameters of the machine according to ISO 3655) equipped with: - CNC control FANUC 0iTF - FANUC Drives and Motors The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Stock No.: 4028 CNC LATHE SWISS TYPE Manufacturer: Maier, Type: ML 32D Proline Serial No.: 06-503, Year of manufacture: 2006 Specifications: Size Diameter 32 Main spindle speeds 6000 Main Spindle 5.5 effect Sub-spindle 3.7 kw Gengen Spindle 6000 C Axis Headspindle 5 C acshen sub-spindle 5 X-1 axis                            X2 Ashes                          X3 Ash                          Z1 Ash                           Z2-Acshe                           Z3 Ash                           Y-axis                            Rapid traverse 32 Control system MAIER PRO - FANUC 31iTA Axis Controlled 9 Opreation time 36749 Cutting time 9315 Tool holder 1 5 pc. 16x16 mm - 4 pc. Red. Tool  ...

Stock No.: 4026 CNC LATHE SWISS TYPE Manufacturer: Maier, Type: ML 26D Proline Serial No.: 05 385, Year of manufacture: 2005 Specifications: Size Diameter 26 Ma. Turning length (fixed guide bush) 320 Main spindle speeds 0-8000 Main Spindle 5.5 effect Sub-spindle                        Sub-spindle max dia. 26 C Axis Headspindle 5 Rapid traverse 32 Control Maier Pro - GE Fanuc Axis Controlled 9 Stanglademagazin FMB 3200 - NO. R-826374 – 2010

The machine is in good technical condition; it can be tested by prior arrangement.

turning diameter over bed: 510 mm turning diameter over slide rest: 310 mm centre distance: 2000 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m turning length: mm 3-jaw chuck (diameter 250mm) tool holder device tail stock 3x steady rest Technische Daten / technical details: Spitzenweite / center to center 2000 mm Umlaufdurchmesser über Bett / rotary diameter over bed 510 mm Umlaufdurchmesser über Schlitten / rotary diameter over sledge 310 mm Spindelbohrung / spindle hole 52 mm Drehzahlbereich / spindle speed 44-2240 UpM /rpm Gewicht der Maschine ca. / weight ca. 2500 kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 4000 mm turning diameter over slide rest: 3500 mm turning length: 30000 mm centre height: 2000 mm workpiece weight: 160 t bed width: - mm bed height over floor: - spindle turning speed range: 0,5 - 80 U/min main drive motor: - kW faceplate diameter: - mm Control: Siemens 840D total power requirement: - kVA weight of the machine ca.: 160 t 2006 modernized/Overhauled and equipped with: - 4-guides bedway - CNC Control Siemens 840D - Face Plate - Counter Stay The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Mixed lot of lathe tooling consisting of indexable insert tool holders and conventional brazed/solid cutting tools in various sizes and configurations. lot weight: 28 kg. Auction-ID: A7-50717-249

Wood lathe on grey cast iron base, fixed headstock that can be moved along the entire length of the bench, variable speed from 100 to 3,200 rpm on 2 ranges with digital tachometer. Condition: New, never used, in its original body. Specifications (optimachines.com plug): • Power supply: 230 V • Spacing between points: 1067 mm • Max. turning diameter: 408 mm • Tip height: 203 mm • Speed range: 100 – 3200 rpm • Spindle thread: M 33 x 3.5 • Tailstock taper: CM 2 • Sleeve stroke: 102 mm • Dimensions (L x W x H): 1968 x 572 x 1194 mm – net weight 175 kg Supplied with: Drive claw, Tailstock, Tool holder 360 mm, Plate 150mm, Service wrenches. Case size: 157 x 53 x 57 (cm) Auction-ID: A1-50698-14

Bench wood lathe: grey cast iron bench, headstock and tailstock, 5 speeds per pulley and belt (680 to 2,800 rpm). Optional bench extension (1,000 mm spacing). Condition: New, never used, in its original box. Specifications (optimachines.com plug): • Power supply: 230 V • Tailstocks: 450 mm • Max. turning diameter: 254 mm • Tip height: 127 mm • Number of speeds: 5 • Speed range: 680, 1000, 1400, 2000, 2800 rpm • Spindle thread: M 33 x 3.5 • Tailstock taper: CM 2 • Barrel stroke: 50 mm • Dimensions (L x W x H): 820 x 300 x 430 mm – net weight 31 kg Carton size: 83 x 43 x 31 (cm) Auction-ID: A1-50698-13

Large mixed lot of metalworking cutting tools/toolholders, predominantly square-shank indexable holders for CNC/conventional lathes. Includes turning, grooving, parting and profiling holders plus a number of tools/components in original or replacement plastic/cardboard cases. Several holders retain carbide inserts and clamping hardware. Mix includes both apparently unused/boxed items and used tooling. Visible brands include Kennametal, Horn, Hertel, Seco, Tungaloy, Sandvik Coromant, Walter, Widax, Safety and GPK/SPK Auction-ID: A7-50717-227

Technical details Type: Independent 4-jaw lathe chuck lot Configuration: - Independent 4-jaw manual chucks - Individually adjustable jaws - Key-operated jaw adjustment - Large spindle mounting bores - Heavy-duty cast steel/cast iron construction Application: - Engine lathes - Manual turning centres - Large shaft machining - Irregular workpiece clamping - Casting and heavy component machining Estimated quantity: Approx. 5 units Estimated chuck diameter: Approx. 400–600 mm Construction: - Heavy-duty industrial workholding equipment - Precision-machined jaw slides Condition: Used Observed condition: - Jaw slides appear complete - No obvious cracks or broken castings visible - Moderate surface oxidation from storage - Dust accumulation present - Chuck keys not included or not visible - Spindle mounting standard and runout not verified Auction-ID: A7-50745-78

General Description Conventional geared engine lathe designed for precision turning, facing, boring, drilling and threading of cylindrical metal workpieces. The machine is equipped with a geared headstock, manual carriage and tailstock for general machining applications. Technical Details Machine type: Geared engine lathe 3-jaw chuck Tailstock Drill chuck mounted in tailstock 4-way toolpost Threading gearbox Feed gearbox Working carriage assembly Condition Used industrial condition. The machine appears complete with chuck, tailstock, toolpost, carriage and gearbox assemblies. Operational status, spindle condition and machining accuracy have not been tested. Auction-ID: A7-50745-30

General Description Slant-bed CNC turning center manufactured by AFM , designed for precision turning, facing, drilling, boring and threading of cylindrical components. The machine is equipped with a hydraulic indexing turret, programmable hydraulic tailstock and enclosed machining area for automated production. Technical Details Manufacturer: AFM Model: Not identified Machine type: CNC slant-bed turning center Year: Not confirmed Hydraulic indexing turret (approx. 8 stations) Hydraulic programmable tailstock Spindle nose (chuck removed) Approximate spindle bore: 55–60 mm Integrated hydraulic unit Electrical control cabinet Coolant and lubrication system Condition Used industrial condition. The machine appears mechanically complete with turret, tailstock, hydraulic system and electrical cabinet installed. The chuck is not fitted. Normal cosmetic wear, oil staining a ...

General Description Centre lathe manufactured by TOS Trenčín , model SV18 RA . Designed for precision turning, facing, boring and threading of shafts and other cylindrical workpieces in toolrooms and general machining workshops. Technical Details Manufacturer: TOS Trenčín Model: SV18 RA Machine type: Centre lathe Serial number: 687 Power: 5.0 kW Power supply: 380 V, 3-phase Control voltage: 220 V Rated current: 13.8 A 4-way toolpost Tailstock Quick-change threading and feed gearbox Leadscrew and feed rod Metric, inch and module threading capability Interchangeable change gears included Chip tray and work light Condition Used industrial condition. The machine appears mechanically complete with headstock, tailstock, four-way toolpost, threading gearbox, leadscrew and change gears installed. Cosmetic paint deterioration, oil staining and surface corrosion are vis ...

General Description Universal horizontal centre lathe manufactured by TOS , model E3N . Designed for precision turning, facing, boring, drilling and threading of cylindrical metal workpieces in toolrooms, maintenance workshops and general machining applications. Technical Details Manufacturer: TOS Model: E3N Machine type: Universal horizontal centre lathe 3-jaw self-centering chuck installed Tailstock Four-way toolpost Leadscrew Quick-change threading gearbox Flexible coolant nozzle Condition Used industrial condition. The machine appears complete with chuck, tailstock, four-way toolpost, leadscrew, quick-change gearbox and coolant system. Operational status, spindle condition and machining accuracy have not been tested. Auction-ID: A7-50745-33

Automatic Swiss lathe Tornos MS 7, without bar feed pipe

Key data: 12 mm

Stohm 125 NAR, # 10594, without rod feed pipe

Auction-ID: A1-50750-5