We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
121,993 used machines on RESALE, but how to find them? Machine Search
maximum number of results exceeded > 1000
please refine your search
used
LOCATELLI- model BIG-ARIETE- Hi production- automatic copy lathe fully hydraulic cycles and tooling advances: automatic hopper feeds squares or round blanks Station #1...blank is advanced...first trim knife trims to blank to fit thru hollow chuck Station #2...(1) roughing knife follows template...to rough to basic shape Station #3...(1) finishing knife makes the first finish cut Station #4...(1) finishing knife (set slightly deeper) makes finish cut Station #5 & #6 end boring or shaping the outer edge (if needed) Station #7...(1) parting tool ...mills the finished part off the blank finish part drops.head stock advances to scheduled stop ...cycle continues 400+ parts per hour are possible complete with lots of tooling and various size steady rests
used
Reichenbacker copy lathe mills/ turns (6) concentric or non concentric pieces at a time (1) station for your model/sample (models may be wood or metal) complete set up for duck decoys various sizes - items like Queen Ann legs, ect (photos available) (6) milling /working stations
used
Hemco hydraulic tracing lathe Hopper feed very good condition...$7,900 obo Contact Fred (716) 433 4224 (12:00 noon is best time to call)
used
ZUCKERMAN CHALLENGER- auto copy lathe and sander, capacity - ( mills 10" dia.by a max. of 120" long) mills using cup cutters- followed by (1) sanding station, unit has hopper feeder, mills & sands one part at a time, does parts like: boat oars, shovel handles, gunstocks, chair legs, ect. Price-$10,900
used
Special attachment for lathes gt; for reworking crankshafts - this attachment can be fixed on top of the cross-slide - via a pneumatic cylinder the top part of the attachment can tilt op to allow the crankshaft to be installed in the chuck - once the crankshaft has been installed in the chuck of the lathe the top part can be closed and positioned around the area that needs to be reworked - once activated the tool insert of the attachment will start turning around the crankshaft to remove excess material. The chuck does not have to turn the crankshaft! The advantage of this concept is that the tool moves around the crankshaft - by doing this the least amount of stress is put on the crankshaft. This in contrast to the classic setup where the stationary tool is pressed into a workpiece being turned by the chuck of the lathe. Max dia of crankshaft: 330 mm
used
Reinbacker- rope turning lathe chuck up your part- twin routers transverse your material as lathe slowly rotates your material several passes give you a straight or tapered spiral like a rope turning or straight or spiral flutes
AUTOMATIC SPINNING LATHE DENN RPE-290 Denn Mod.RPE-290 Automatic Spinning Lathe- Spindle Speeds 615/1060/1825 RPM. More information on request.
used
For sale we offer new scissor roller conveyor. Roll width 610mm Length retracted 3000mm Length extended 8000mm Height 690-1000mm Load capacity 130kg/m Available quantity: 2 pieces Other lengths available in stock: 4 and 10m Shipping worldwide Price per piece 6.700€ net plus VAT If you are interested, please contact us to confirm availability.
used
For sale we offer new scissor roller conveyor. Roll width 760mm Length retracted 3000mm Length extended 8000mm Height 690-1000mm Load capacity 130kg/m Quantity available: 1 piece Other lengths available in stock: 4 and 10m Shipping worldwide Price per piece 7.100€ net plus VAT If you are interested, please contact us to confirm availability.
used
Kat-No 10-1750 in very good condition With connection socket at the top With manhole lid front 400x300 mm With tasting tap connection With 2 x threaded connection connector at the front With conical floor with residual outlet DN 65 With 3 transport eyelets With bracket for riser pipe Height-adjustable on 4 calotte feet Dimensions: Total height: 4300 mm Body height: 3160 mm Diameter: 1800 mm For back-up questions: Tel: 09353 90905-0 or Fax: 09353 90905-22 Mobile: 0171 651 82 48 We also have other items (new or used), tanks, pumps, filters, beverage and food technology, brewery, distillery and much more - Please request our complete catalogue! All prices are ex works plus law VAT. Intermediate sale reserved! Freight cost share: by scope of delivery Visit also in the evening or on weekends by appointment.
used
Cat. No. 12-2130 in a very good condition With Heating and Cooling Jacket with Paddel Agitator DxH: 2100 x 3900 mm For more Information please contact us under: Phone +49(0)9353-909050 Fax: 09353-9090522, Mobile: 0171-6518248 Subject to prior sale. All prices are valid Ex-Works, excl.VAT. Freight Charges: depending on dimensions and destination.
used
three-phase electric motor VEM; ELMO Type 1133.7 / 2 220 V 100 W 8000 rpm shaft Ø 9 mm New ! Dimensions 210 x 120 x 110 mm
used
Pneumatic Linear Cylinder ORIGA 288415 / 80006773 stroke: 350 mm New ! Dimensions: 510 x 70 x 45 mm
used
Servomotor BECKHOFF AM3021-0C30-0000 ( AM30210C300000 ) 0,0,32 kW 8000 rpm 230 V AC IP54 shaft diameter: Ø 9 mm flange: 58 x 58 mm New Dimensions: 115 x 80 x 100 mm
new
Hydraulic lifting device, machine jack, lifting device with integrated pump MEILI 2006-C load capacity ( piston ): 20000 kg load ( claw ): 8000 kg stroke: 152 mm attachment height ( claw ): 70 mm attachment height ( head plate, without claw ): 260 mm support surface ( claw ) : 65 x 35 mm Support surface( headstock ) : Ø 65 mm Operating rod: 775 x Ø 20 mm used, tested ! Dimensions (lifting device): 320 x 130 x 280 mm
used
Capsule type: champagne cap applicator, champagne cap folding capacity / hour ca.: 8000 working direction: rotating turret Working type: fullautomatic amount of capping heads: 8 electrical power supply kW: 5 More then 300 machines new and second hand on our seema .de
used
LIQUIDATION of automatic meat unveiler from the manufacturer MAJA, model SRA 8000. Its condition is of occasion equipment totally revised in its entirety (re-release) guaranteed. Cutting blade measures 499 x 20 x 1 mm. Pneumatic pressure 6+ bar. Electrical power 400V, 50Hz, 3n. Total weight 500 kg. Overall dimensions 3163 mm long x 872 mm wide, 1379 mm high. Specially designed for polishing round pieces of meat, for finishing in 4G and 5G etc. Its condition is of occasion equipment totally revised in its entirety (re-release) guaranteed and very quiet. Its condition is excellent re-release. Equipment reviewed and guaranteed.
used
router motor ELU MOF177/02 1,85 kW 8000 - 20000 rpm 220 V 1AC 50 - 60 Hz shaft diameter: Ø 23 mm tool holder with collet: Ø 12 mm holes for guide rails: Ø 18 mm, Depth: 120 mm Hole spacing: 132 mm used, tested ! Dimensions: 234 x 105 x 223 mm
used
capacity / hour ca.: 8000 amount of capping heads: 8 working direction: right-left (CCW) Drive: inverter More then 300 machines new and second hand on our seema .de
used
Upper bottle, pulley, wire rope clamp, single GEBRÜDER DICKERTMANN BIELEFELD Type 621 Load capacity: 8 t ( 8000 kg ) Rope pulley diameter: Ø 310 mm rope diameter: Ø 20 mm suspension: Suspension eye ( vertebral eye: Ø 48 x 110 mm, swivel and swivel diameter suspension eye: Ø 32 mm Material: steel used, tested ! Dimensions: 880 x 330 x 120 mm
used
Hook Hook Bottle, Crane Bottle, Lower Bottle, Pulley, Wire Rope Clamp, Two CARL STAHL 8000 kg Load capacity: 8 t ( 8000 kg ) rope Roller diameter: Ø 250 mm rope diameter: Ø approx. 25 mm single hook with safety hook opening: 45 mm Material: steel used, tested ! Dimensions: 830 x 270 x 210 mm
used
Description: 4-strand sling chain with coupling hook Manufacturer: CERTEX Type: 4 - strand, NL = 6.0m, ND = 10 mm Approx. Onsite Dimension. (l x w x h): 500 x 500 x 250 mm, weight approx.: 70 kg
used
Description: 4-strand sling chain with coupling hook Manufacturer: CERTEX Type: 4 - strand, NL = 6.0m, ND = 10 mm Approx. Onsite Dimension. (l x w x h): 500 x 500 x 250 mm, weight approx.: 70 kg
used
Technical data: Completely overhauled in 2001 Circulation diameter over bed: 1000 mm Diameter in recess: 1120 mm Circulation diameter over bed slide: 690 mm max. height above floor: 1110 mm max. height above bed: 460 mm Bed width: 800 mm Width of recess in front of the plan disc: 550 mm
used
Tip height: 330 mm centre distance: 1500 mm circular diameter: bed 690 mm spindle bore: 82 mm spindle retainer: short taper size 8 taper tailstock: 6 MK spindle speed: 7.1-1400 rpm feeds: longitudinal/plan 0.05 112/0.025 56 mm / U thread pitches: 0.25-560 mm electrical connection: 380 V, 15 kW space: 3350 x 1800 x 1400 mm weight: 4800 kg
used
Tip height: about quilt 300 mm centre distance: 1500 mm circular diameter: upper bed 640 mm spindle bore: 67 mm spindle retainer: Gr. 8 taper tailstock: 5 MK spindle speed: 18 - 900 rpm feeds: longitudinal/plan 0.063 0.032 2.1 mm / U thread pitches: 0.5-14 mm electrical connection: 380 V, approx. 7.5 kW space: 1550 x 3100 x 1250 mm weight: approx. 3500 kg hardly used and therefore well-preserved bed lathe
used
Tip height: 107 mm top width: 350 mm circular diameter: bed 200 mm spindle bore: 25 mm taper tailstock: 2 MK spindle speed: 35 - 3500 rpm feeds: longitudinal and mm/U thread pitches plan: 0.2-3 mm electrical connection: 380 V, approx. 2.2 kW space: 600 x 1300 x 1230 mm weight: 850 kg
used
digital display swingdiameter over bed 800 mm swingdiameter over slide 600 mm distance between center 2000 mm spindle speed750 1 / min multifix tailstock
new
TH 3309 Control and spindle lathe Fixed bezel D = 19-70 mm Revolving bezel D = 16-50 mm LED machine lamp Reduction sleeve MK 3 / MK 5 Motor protection switch Emergency stop foot operated Engine: 400V 1, 5 kW 50 Hz Tip height 156 mm Top width 830 mm Spindle speed 60 - 2000 min-1 16 levels Spindle cone MK 5 Spindle bore D = 38 mm Weight 430 kg Dimensions Lxwxh: 1685 x 745 x 1320 mm G & PIECES 3402030
new
Made in Italy machine according to DIN 8606 Tip height: 260 mm Turning diameter over bed: 520 mm Swing over carriage: 300 mm Centre distance: 1500 mm Bed width: 400 mm Spindle bore: 82 mm Spindle nose: Camlock 8 " Spindle speeds: (24) 9-1600 rpm (option 11-2000 U/min) Engine output: 5.5 kW (option: 7.5 kW) feed Z-axis: (93) 0.028 6.43 mm / Rev Feed x axis: (93) 0.012 2.73 mm / Rev Thread, metric: (54) 0.5-224 mm Thread, Witworth: (55) 72 - 1/8 TPI Thread, module: (54) 0.5-112 mm Thread, Diametral Pitch: (54) 64 - 1/4 D.P.. Cross slide Lxw: 650 x 230 mm Transversal carriage stroke: 340 mm Upper carriage Lxw: 350 x 150 mm Upper carriage stroke: 150 mm Tailstock Quill diameter: 85 mm Tailstock Quill stroke: 200 mm Tailstock taper: MK 5 Weight: 3,100 kg Facilities: -Movement of the tailstock pneumatically supported -Acceptance Protocol according to DIN 8605, ...
new
Made in Italy machine according to DIN 8605: lathe with increased accuracy. Tip height: 215 mm Turning diameter over bed: 430 mm Swing over carriage: 240 mm Top width: 1,000 mm Bed width: 290 mm Spindle bore: 52 mm Spindle nose: Camlock 6 " Spindle speeds variable: 6 Spindle speeds: 60-2,000 rpm S6/S1 engine power: 4 kW (option: 5.5 kW) feed Z-axis: (38) 0.05 - 1.88 mm / Rev Feed x axis: (38) 0.02 1,084 mm / Rev Thread cutting, metric: (30) 0.45-20 mm Thread cutting, Witworth: (35) 80-1 3/4 TPI Thread cutting, module: (25) 0.25-10 mm Thread cutting, Diametral Pitch: (30) 160-3 1/2 D.P.. Cross slide Lxw: 370 x 190 mm Transversal carriage stroke: 240 mm Upper carriage Lxw: 275 x 115 mm Upper carriage stroke: 120 mm Tailstock Quill diameter: 60 mm Tailstock Quill stroke: 135 mm Tailstock taper: MK 4 Weight: approx. 2,000 kg Facilities: -Infinitely variable ...
used
Precision lathe with cycle automatic Make: Hamlet Model: E 70 x 2000 Year of construction: 1997 For food and feed shaft machining Technical data: Workspace Turning length: 2000 mm Swing over bed: 720 mm Swing over cross slide plan: 430 mm Displacement of the plan slide: 410 mm Bed width: 480 mm 3prpek3uq Spindle nose ACC. to DIN 55027: size 11 Spindle diameter in front bearing: 150 mm Spindle bore: 106 mm Inside taper of the main spindle: 112 metric Control: Siemens 805 Spindle gearbox newly stored according to the manufacturer ca. 2.500 EUR
used
Made in Italy Peak: 300 mm Rotary diameter over bed: 600 mm Rotary diameter via sled: 380 mm Peak: 1,500 mm Bed width: 400 mm Spindle bore: 82 mm Spindle nose: Camlock 8 " Spindle speeds: (12) 16-1200 U/min Engine power: 9.2 kW (special equipment/standard: 7.5 kW) Reprimor Z-axis: (93) 0.028-6.43 mm/U Feed X-axis: (93) 0.012-2.73 mm/U Thread, metric: (54) 0.5-224 mm Threads, Witworth: (55) 72-1/4 x8 TPI Thread, module: (54) 0.5-112 mm Threads, Diametral Pitch: (54) 64 -1/4 D.P. Crossleigh hub: 340 mm Oberslitten hub: 150 mm Riding stock pinol diameter: 85 mm Riding stove pinol stroke: 200 mm Ridstock cone: MK 5 Weight: About 3,200 kg Facilities: -3-axis digital display -Step-by-step speed adjustment -Automatic lubrication of the management railways -LED lighting -Micrometer bed strike -9.2 kW engine instead of 7.5 kW -Quick change holder system mul ...
new
Tip width: 700 mm Tip height: 150 mm Circulation diameter over bed: 300 mm Bed width: 180 mm Spindle bore: 38 mm Mounting in the spindle bore: MK 5 Speed range, infinitely variable: 30 - 450 / 150 - 3000 rpm Range of longitudinal feeds: (14) 0.07 - 0.65 mm/U Area of plan feeds: (11) 0.03 - 0.12 mm/U Metric threads: (18) 0.2 - 3.5 mm Inch Thread: (21) 8 - 56 Gg/1" Pinole path: 85 mm Pinole holder: MK 3 Engine power S1 100%: 1.5 kW / 400 V Motor recording power S6 40%: 2.2 kW / 400 V Machine dimensions (W x D x H): 1380 x 640 x 500 mm Weight approx.: 235 kg without base Delivery: - Digital display - 3-jaw chuck PO3-160 mm steel version - Feed flange 160 mm - Solid grain tips - Interchangeable wheels - Quick-release steel holder size 20-2 with 2 straight inserts - Slip clutch - Micrometer longitudinal stop - Plan sled with top support - Frequency inverter ...
used
1 x L+Z lathe Colchester Mascot 1600/600 Built: c.1975 Very stable lathe. Ideal machine for locksmiths or agricultural machine mechanics. Technical data: Turning diameter over crimson: 710 mm Turning diameter over bed:432 mm Turning diameter via support:267 mm Turning length: 1,000 mm Spindle speeds:20 - 1600 rpm Spindle bore:76 mm Drive motor:5.6 kW Feeds: 0.6 - 10 mm/u Metric threads: 40 (0.4 - 14 mm incline) Machine weight approx.:2000 kg Room requirements approx.:l:2.65 x w:1.1 x h:1.6 m Accessories: 3 - Jaw lining UVA 310 mm 4 Set of change jaws Bfraed8ae0 Tripan quick-change system 4 x Interchangeable holder running counter tip in tailstock (MK 5) Countertip in spindle Alternating wheels Manual Mudguard complete documentation The machine can be inspected at our warehouse in Reichenbach under electricity.
used
No. 4620: 1 gebr. Guide and pull spindle lathe Fabr. BOLEY, Type 5 LZ, Arb.-Ber.: SpH 130 x 500 mm, Other: Spindle speeds: in 22 stages 28 - 2550 min-1 Space requirement: 1.5 x 0.9 x 1.25 m Weight ca 800 kg
used
Description Universal lathe suitable for tooling, fixture construction, training and mould making Peak height: 180mm Speed:25-2000 rpm Technical data Built in 2015 Speed 25-2000 rpm Peak height 180mm (360mm) Peak width 1000mm Spindle passage 38mm Reitstock MK 3 Total power requirement 4 KW Weight 880kg Connection 50 Hz 3x 380V
new
Stepless guide and pull spindle lathe TC 250 V Peak height: 250 mm Circulation diameter via slide: 350 mm Orbital diameter in the croation: 695 mm Tip width: 1500 mm Spindle nose: DIN 55029, Camlock, size 6 Bed width: 305 mm Cross slide path: 272 mm Upper slide path: 155 mm Spindle bore: 80 mm Speed range, infinitely variable: (3) 30 - 2200 rpm Whitworth Thread: (45) 2 - 72 TPI Metric Thread: (39) 0.2 - 14 mm Diametral Thread: (21) 8 - 44 D.P.I Module Thread: (18) 0.3 - 3.5 module Longitudinal feeds: 0.04 - 1.00 mm/U Flat feeds: 0.02 - 0.50 mm/U Engine power: 5.5 kW Dimensions LxWxH, approx.: 2900 x 1175 x 2040 mm Weight, approx.: 2,200 kg characteristics: - Toolmaker accuracy - Stepless speed control (3 pre-level steps) - Finely-balanced main spindle - Stable machine bed with hardened and ground guides - One-piece cast base - Adjustable precision cone roll ...
used
Machine details Stock number 1105-03330 Machine type guide and pull spindle lathe Make ERNAULT-SOMUA Type Cholet 550 Year of construction 1990 Control type conventional Storage location FRANCE Country of origin France Delivery time immediately Freight base EX WORK price Technical details Turning diameter over bed 550 mm Turning diameter via support 500 mm Turning length 1100 mm Tip height 250 mm Spindle bore 52 mm Inner cone 136 Spindle speeds 32-1800 rpm Feeds - bed slide / lengthwise 0.05-07 mm/w Feeds flat slide 0.033-0.45 mm/min Total power requirement 13 kW Weight of the machine ca. 2,3 t Space requirement approx. 2870 x 940 x 1400 m Information accessories: PARAT steel holder 4 STUCK 3 bake lining dia 250mm 2 AXIS DIGITAL
used
Maximum diameter to turn on the bench 2,110 mm Maximum diameter to turn on trolley 1,600 mm Maximum distance between platforms 12,830 mm Spindle hole diameter 155 mm Cone on spindle no. 120 metric Cone on spindle (with reduction) no. 6 clamps Cone on the counterpoint (6-bit reduction) no. 120 metrics Maximum stroke of the counterpoint 400 mm DSeed from the tool support plane to the axis of the 80 mm centers Main engine power 100 HP Spindle speed from 0.9 to 90 rpm with continuous variation Longitudinal feed no. 36: 0.2 to 12.8 Transverse advances No. 36: 0.1 to 6.6 Metric fillets #26: 1 to 42 Whitwoth fillets #17: 0.5 to 11 Quick forwards Maximum permissible load on the tips 50-60 ton Refrigerant liquid system
used
Peak height 2,600 mm Point distance 10,000 mm Closed bench 2,000x6,000 mm To be completed with CNC
used
Height tips 220 mm Useful length 1,000 mm 42 mm bar pass
used
Equipped with no. 03 guides Overhauled with: guide grinding, CN conversion, new electrical and hydraulic system, hydraulic self-centering installation, shaving conveyor; CN Fagor 8055 Numerical Control – BT Maximum turnerable diameter 1800 mm 3-grife hydraulic self-centering with a diameter of 1450 mm with tightening force 30 Ton with 30 bar clamp L max turnerable 3000 mm Spindle engine power 110 Kw Maximum rotation speed 180 rpm Fast value axles 4000 mm/min M3/M4 Spindle Rotation Inversion Possibility 4 speed ranges Hydraulic counterpoint Maximum capacity of workpiece on counterpoint 12500 Kg It is currently possible to work details of up to 3000 mm length but the extension pallet is available to be able to work details up to 8 m in length. (un revised); Machine installed and working
used
Max length 8,000 mm Maximum turning diameter above wagon 1,250 mm Max vault over guides 1,650 mm Maximum turning diameter under spindle 2,000x700 mm Displayed – two axes
used
Platò diameter: 1300 mm Used lathe in good condition, available unless sold.
used
IN THE RETROFITTING PHASE Height tips 900 mm Point distance 7,000 mm Turnerable diameter on the bench 1,850 mm Turnerable diameter on trolley 1,350 mm Turnerable diameter on recess 2,150 mm Bench width 1,000 mm Bar passage diameter 206 mm ASA A1 15" spindle attachment Top speed 300 RPM Diameter of the tank counterpoint 220 mm Row stroke counterpoint 450 mm Withworth threads - metrics - diametrics - module Weight allowed between tips without lunettes 15 ton Weight allowed between tips with a 20-ton bezel
used
Height tips 300 mm Distance between tips 4,000 mm Spindle speed (16) 15-1,500 rpm Bar pass 105 mm Engine power 15 HP displayed with ELBO system
used
peak heights: 250 mm point distance: 1500 mm bar pass: 105 mm
used
Maximum turnerable diameter: 1040 mm Turning diameter above the wagon: 620 mm Maximum workable length: 5200 mm Spindle power: 40 kW CNC ECS Optical line measurement system Maximum flow between tips: 10 tons Machine complete with chip evacuator, 4-position hydraulic turret, safety shelters in compliance and spindle 3-jaw hydraulic self-centering AUTOBLOCK; Various accessories available (tool case, stretchers, lunettes...) EC 2018 remarking possibility
used
Code 0782 Description Centerlathe Make A.I. Hembrug Model DR - 133 Serial No. DR 133 / F 4018 Year 1970 Distance between centers 750 mm Swing over bed 270 mm Swing over gap xxx mm Swing over crossslide 150 mm Spindle bore 35 mm Number of spindle speeds 28 Spindle speeds 18 – 3550 rpm Feeds Longitude and cross Motor power 3 kW – 380 Volts Thread cutting Metric, W.W., Modul and D.P. Accessoiries 3 chuck 2 x RSF DRO Condition Machine is in normal condition.