lackierkabine24de used for sale

Manufacturer: Dete Vorwärmgerät für Lack, Type: 32Ex 1 R, Year: 2000, FREETEXT2: 3,5 Kw, FREETEXT3: Ex geschütz, FREETEXT4: Regelbar Temperatur, Year :2000

degree: 1200 length: 2250 mm width: 1450 mm depth: 2000 mm pan capacity: 320 Kg / Al capacity: 840 u/F total power requirement: 102 kW weight of the machine ca.: 3,5 t dimensions of the machine ca.: m NEW GOODS with manufacturer guarantee ORIGINAL PACKAGED Melting electric tilting furnace PTS 970 /12 Technical parameters Mark: PTS 970/12 Max. temperature: 1200 °C Recommended range of operating temperatures: 650-1000 °C (in crucible) Capacity: 840 kg of Al Crucible type Noltina or equivalent: TBNS 800 Capacity of crucible: 320 l External dimensions (w x h x d): 2250 x 2450 x 2000 mm Melting output: 250 kg of Al alloys/h Heating power input: 102 kW Weight: 3500 kg Protection: 200/3 Voltage: 3/N/PE 400/230 V AC 50 Hz Protection can vary depending on the accessories chosen (at additional cost). The melting output values specified in the table are the maximum values. They are achievable if  ...

degree: 1200 length: 2250 mm width: 1450 mm depth: 2000 mm pan capacity: 320 Kg / Al capacity: 840 u/F total power requirement: 102 kW weight of the machine ca.: 3,5 t dimensions of the machine ca.: m NEW GOODS with manufacturer guarantee ORIGINAL PACKAGED Melting electric tilting furnace PTS 970 /12 Technical parameters Mark: PTS 970/12 Max. temperature: 1200 °C Recommended range of operating temperatures: 650-1000 °C (in crucible) Capacity: 840 kg of Al Crucible type Noltina or equivalent: TBNS 800 Capacity of crucible: 320 l External dimensions (w x h x d): 2250 x 2450 x 2000 mm Melting output: 250 kg of Al alloys/h Heating power input: 102 kW Weight: 3500 kg Protection: 200/3 Voltage: 3/N/PE 400/230 V AC 50 Hz Protection can vary depending on the accessories chosen (at additional cost). The melting output values specified in the table are the maximum values. They are achievable if  ...

degree: 1200 length: 2250 mm width: 1450 mm depth: 2000 mm pan capacity: 320 Kg / Al capacity: 840 u/F total power requirement: 102 kW weight of the machine ca.: 3,5 t dimensions of the machine ca.: m NEW GOODS with manufacturer guarantee ORIGINAL PACKAGED Melting electric tilting furnace PTS 970 /12 Technical parameters Mark: PTS 970/12 Max. temperature: 1200 °C Recommended range of operating temperatures: 650-1000 °C (in crucible) Capacity: 840 kg of Al Crucible type Noltina or equivalent: TBNS 800 Capacity of crucible: 320 l External dimensions (w x h x d): 2250 x 2450 x 2000 mm Melting output: 250 kg of Al alloys/h Heating power input: 102 kW Weight: 3500 kg Protection: 200/3 Voltage: 3/N/PE 400/230 V AC 50 Hz Protection can vary depending on the accessories chosen (at additional cost). The melting output values specified in the table are the maximum values. They are achievable if  ...

degree: 1200 length: 2250 mm width: 1450 mm depth: 2000 mm pan capacity: 320 Kg / Al capacity: 840 u/F total power requirement: 102 kW weight of the machine ca.: 3,5 t dimensions of the machine ca.: m NEW GOODS with manufacturer guarantee ORIGINAL PACKAGED Melting electric tilting furnace PTS 970 /12 Technical parameters Mark: PTS 970/12 Max. temperature: 1200 °C Recommended range of operating temperatures: 650-1000 °C (in crucible) Capacity: 840 kg of Al Crucible type Noltina or equivalent: TBNS 800 Capacity of crucible: 320 l External dimensions (w x h x d): 2250 x 2450 x 2000 mm Melting output: 250 kg of Al alloys/h Heating power input: 102 kW Weight: 3500 kg Protection: 200/3 Voltage: 3/N/PE 400/230 V AC 50 Hz Protection can vary depending on the accessories chosen (at additional cost). The melting output values specified in the table are the maximum values. They are achievable if  ...

Manufacturer: Rollgang angetrieben für Lackstrasse, Working length mm: 950, Working widht mm: 1300, Total hight mm: +/- 980, Frequency converter: yes, Total hight mm: +/- 980, Engine power kW: ca.0,5, Feeding speed min-max m/min: 10-25, Working hight adjustable mm: yes, Manufacturer: Rollgang angetrieben für Lackstrasse, Working widht mm: 1300, Total hight mm: +/- 980, Roller pitch mm: 150, roller diameter: 45, Feeding speed min-max m/min: 10-25, Working widht mm: 1300,

Hitachi LaChrom Elite L 2455U Ultra DAD Hitachi LaChrom Elite 2455Z Diode Array Detector, Measuring range 190-900 nm Standard measuring cell 3.2 μl Automatic wavelength calibration

Lachnit conveyor technology mobile jack for 200 litre meat container, name: EDESTAHL-LIFT-KIPPMASCHINE, Type: 300 S, Serial number: 4561, Year of manufacture: 2017, Cross weight: 900 kg, 400 V, 50 Hz, 3.3 kW, Load capacity weight: 350 kg, Lifting height: 3650 mm, Overall dimensions: 1600 mm x 1100 mm x 3260 mm. 97cfg3mbu Although the tilt height is over 3000 mm, the machine can be retracted, so that you can drive through doors into other rooms with a height of 1950 mm. Lachnit is the only one who does this.

Lachnit conveyor technology mobile jack for 200 litre meat container, name: EDESTAHL-LIFT-KIPPMASCHINE, Type: 300 S, Serial number: 4561, Year of manufacture: 2017, Cross weight: 900 kg, 400 V, 50 Hz, 3.3 kW, Load capacity weight: 350 kg, Lifting height: 3650 mm, Overall dimensions: 1600 mm x 1100 mm x 3260 mm. 97cfg3mbu Although the tilt height is over 3000 mm, the machine can be retracted, so that you can drive through doors into other rooms with a height of 1950 mm. Lachnit is the only one who does this.

Lacfer CR2-E250 rebuilt lathe. Distance between centers: 1.500mm. Swing: 530mm. Swing over carriage: 320mm. Swing in gap: 740mm. 16 speeds. (18-1.600rpm). Main motor power: 10hp. Spindle bore: 60mm. Equipped with universal chuck. Equipped with steady rest. CE certificate for european used machines.

Reference Num.: 3344 Brand: Laconda Type: 620 Available: directly Status: In production Location: Deutschland Equipment: - 7 Stationen - Heft-, Falz-, Schneideaggregat Theisen Bonitz

Lachnit Fördertechnik tilting device for pallet boxes, type: 322 Z/S, serial number: 4810, year of construction: 2019, 400 V, 3 Ph, 50 Hz, 6.4 A, load capacity: 1000 kg, gross weight: 2800 kg, inlet dimensions: 1240 mm x 1080 mm x 1000 mm, tilting height: 1300 mm, overall dimensions: 3250 mm x 2180 mm x 4330 mm. Tilting height can be changed up to 2000 mm.

Inv. Num. : 4024 Type: M 4040-CNC Producer: LACH-DIAMANT Produced: 1998 Parameters: Travel X-axis: 210 mm Travel Y-axis: 240 mm Travel Z-axis: 400 mm Tool diameter: 400 mm Tool holder: ISO 50/SK 50 Machine weight: 1750 kg It is used for sharpening diamond tools (PCD) for the furniture industry. Accessories: Saw blades up to average 600 mm Shaft heads

Hitachi LaChrom L 7485 Fluorescence Detector Excitation 200-850 nm Emission 250-900 nm Autozero analytical flow cell

Manufacturer: Lackaufheizer EX Ausführung, Year: 2000, FREETEXT1: geeignet für 200 Liter Fässer, FREETEXT2: Heizung Elektrisch, FREETEXT3: fahrbar auf Rolle, FREETEXT4: Durchmesser 650 mm, FREETEXT5: Höhe 1000 mm, Year :2000

Hitachi LaChrom Elite Ultra HPLC -L 2160U Gradient Pump with Degasser max. pressure 600 bar, max flow 5 ml/min -L-2200 U Autosampler/cooling -L2455U DAD/Diode Array Detector -L2350 Colcom/Column Furnace for 4 HPLC Columns Second L 2160U pump on request Price: VB

LACHNER DGA 900 TOP DIGITAL with digital display Battery operated (6x Mignon 1.5V) Resolution: 0.1 degrees 2 stop flaps 1 stop extension Universal fastening system Fits almost any sliding table saw Instruction manual available

Lach Dia 2100 mini Year 2010 Technical data: Tool diameter max.400mm Profile width max. 70mm

Swing: 530mm. Swing over carriage: 320mm. Distance between centers: 2000mm. Spindle: 60mm. Equipped with chuck. Equipped with DRO Fagor. Motor power: 10cv.

Universal parallel lathe Useful length: 2000mm Turning radius: 260mm Ø 60 mm bar pitch, 16 speeds from 18 to 1.600 rpm. With protections ATTENTION! POSSIBLE MACHINE CONNECTED TO 220V THREE-PHASE. VERIFY!

Machine for the production and grinding of diamond tools.

max. speed: 8000 /h serial no.: L9-270 max. paper size: 490 x 340 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bushing cut-off diameter range 6,5 mm number of dies 8 number of stations (incl. cut off) 9 cutting length 6-10 mm output - pieces/min 150

: . max. swing diameter: 460 mm hollow: 66 mm digital: . multifix: . centre distance: 1000 mm feed:: . weight of the machine ca.: 1,8 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed:530 mm turning diameter over slide rest:320 mm turning length:2000 mm center height over bed:275 mm speeds:18 - 1600 U/min spindle bore:60 mm bed width:430 mm engine output:17 kW weight:2700 kg spindle taper:7 dimensions of the machine ca.:5,5 x 1,40 x 1,75 m - 3-chaw chuck Röhm D = 350 mm - tool holder system - approx. 10 pcs. tool holder - workpiece wheigt between centers 500 kg - many accessories in 2 pcs. tool cabinets

1 Somavis T 8 K lace pinching machine 1 Somavis T 8 L lace pinching machine Built in 1983 maximum diameter is 6 mm maximum shaft length is 80 or 100 mm Output: 200 - 600 pieces per minute Both machines are in good condition

Transformer, transformer, three-phase transformer TRAFOBAU SCHUSTER LAC-2967 7,5 mH 33 A spare part for milling machine MAHO MH600E ! used ! Dimensions: 130 x 130 x 220 mm

Food hose, 2 pieces CONTINENTAL CONTITECH Lactopal® L DN50 x 8 mm 1x Length: 1.3 m 1x Length: 5.0 m Operating pressure: -0.8 - 16 bar Operating temperature: 20 - 80 °C Material ( core ): NBR, white Article consists of a food hose length 1.3 m and a food hose length 5.0 m New ! Dimensions ( packed ): 950 x 950 x 230 mm

Manufacturer: Olaer Parts: Euro-Hydro - Brook Compton 3 Phase Cooler Matrix Maximum Static working pressure: 21BAR Maximum dynamic working pressure: 14 BAR (Tested according to ISO/DIS 10771-1 Heat transfer allowance: +-6% Maximum fluid temperature in the cooler matrix: 120 Celsius degrees Maximum Cooling capacity: 160kW Fluid compatibility Mineral oil: HL/HLP Oil/water emulsion: HFA/HFB Water Glycol: HFC Phosfatester: HFD-R Material Cooler matrix: Aluminium Fan housing: Steel Fan blades/hub: Glass fibre reinforced polypropylene/aluminium Fan guard: Steel Other parts: Steel Surface treatment: Electrostatic powder coated 3Phase Motor Insulation class: F Rise of temperature: B Protection class: IP55 1Phase Motor Insulation class: B Rise of temperature: B Protection class: IP 44 3Phase Motor LAC 004 Rated voltage: 230/400 50/60 Hz Insulation class: ...

Description: - Edge profiling, sanding and painting system - Serial number 03083 - Total installed power 117 KW - Working width from 200 mm up to 2500 mm - Workpiece thickness from 6 mm up to 80 mm - Minimum workpiece length 90 mm - Adjustable feed speed from 5 m/min up to 44 m/min - Power of the feed motors: 7.50 KW and 0.75 KW - Power of the machine opening motor 1.50 KW - Machine equipped identically on both sides with 9 units on each side: - 1 - Milling unit: adjustable in depth, height and inclination, motor 7.50 KW-6000 rpm - 2 - Milling unit: adjustable in depth, height and inclination, motor 4 KW-3000 rpm - 3 - Fine milling unit: upper and lower motor with 1.80 KW-12000 rpm each, tiltable up to 45° - 4 - Belt sanding unit: motor 2.20 KW-940 rpm, swiveling, height and depth adjustable, with pneumatic sanding pad - 5 - Belt sanding unit for upper bevel: Motor 1.10 KW-930 rpm, swiv ...

Make : Lutro Built: 1991 Dimensions: 5.0 m x 12.1 m x 4.8 m (LW approx. WxLxH) Supply ceiling : Filter ceiling all-surface Lamps on top: 2 x 7 pcs recessed luminaires with 4 x 58 W each Lamps on the side: 2 x 3 pcs recessed luminaires with 4 x 58 W each Drive-in side: 5-leaf gate 4.7 m x 4.5 m (approx. WxH) Escape door: 0.65 m x 1.95 m (approx. WxH) Exit side: 5-leaf gate 4.7 m x 4.5 m (approx. WxH) Escape door: 0.65 m x 1.95 m (approx. WxH) Rusting: 2 x 12 pcs. 600 x 840 mm, support rod 600x60x4 mm Heating : Oil burner, 523 kW Supply unit: 45,000 m3/h; 2 x 7.5 kW motor Exhaust unit: 45,000 m3/h; 2 x 7.5 kW motor Dry temperature: 80 degrees C Piping : supply and exhaust pipes, deflector hood, air intake bow Electrics : Control cabinet Location : Room Lörrach Sales price: € 29,990,- net, from location without dismantling This plant is already sold. We will p ...

Checks the level of liquids using X-ray and checks to see whether has no plastic or metal cap.

Paint casting machine, paint casting machine, paint casting station -Paint casting machine -Manufacturer: Burkle -Max. Casting width: 1290 mm -Adjustable casting gap: via handwheel with display -hydraulic: height adjustable -without: paint pump -Dimensions: 2100/800/H1450 mm -Weight: 386 kg

: neu : 2024 : 1682 : prompt, Zwischenverkauf v : Bulgarien : 43490 € : 882.85 € : 1 : 600 mm : 2000 mm : 300 mm : 80 mm : 400 mm : 400 mm : 8 : 90 M : 21 : 20 - 2000 1/min : 120 : 0.04 - 12 mm/U : 0.02 - 6 mm/U : 64 : 0.5 - 120 mm : 60 - 1/4 Gänge/ : 0.125 - 30 : 315 mm : 130 mm : 90 mm : 5 MK : 230 mm : 7.5 kW : 3600 mm : 1250 mm : 1400 mm : 3110 kg driven by conventional gearbox 3-axes digital readout Fagor 40i quick change toolpostAmestra Multisuisse type C with 4 holders (3 square, 1 round) 3-jaw chuck Bison3204/DIN6350, Ø 250 mm spindle dead center four way rapid traverse device electromagnetic brake longitudinal stop for 1 position coolant equipment full length rear splash guard leadscrew and shaft protection safety guard for the chuck toolholder guard levelling bolts and plates quick release tailstock low voltage machine lamp operating manual machine according to ",CE&q ...

: neu : 2023 : 1675 : prompt, Zwischenverkauf v : Bulgarien : 21070 € : 431.94 € : 1 : 325 mm : 1000 mm : 165 mm : 32 mm : 190 mm : 200 mm : 5 : 4,5 M : 12 : 85 - 2.000 1/min : 48 : 0.006 - 1.77 mm/U : 0.003 - 0.885 mm/U : 0.1 - 28 mm : 75 - 2,5 Gänge/ : 0.1 - 1.75 : 4 - 70 : 150 mm : 95 mm : 40 mm : 3 MK : 100 mm : 2.2 kW : 2150 mm : 950 mm : 1350 mm : 770 kg driven by manual transmission 3-axes digital readout Fagor 40i quick change toolpostAmestra with 4 holders (3 square, 1 round) 3-jaw chuck Bison 3204/DIN6350, Ø 160 mm spindle dead center coolant equipment full length rear splash guard leadscrew and shaft protection safety guard for the chuck toolholder guard levelling bolts and plates quick release tailstock low voltage machine lamp operating manual machine according to ",CE", incl. following optional equipment: 1 lenght stop FURTHER TURNING LENGTHS ON REQUEST The d ...

: neu : Bulgarien : 40800 € : 828.24 € : 500 mm : 1500 mm : 250 mm : 72 mm : 300 mm : 400 mm : 8 : 80 M : 21 : 20-2000 1/min : 120 : 0.04 - 12 mm/U : 0.02 - 6 mm/U : 64 : 0.5 - 120 mm : 0.125 - 30 : 315 mm : 130 mm : 90 mm : 5 MK : 230 mm : 2950 kg driven by manual transmission 3-axes digital readout quick change toolpostAmestra with 4 holders (3 square, 1 round) 3-jaw chuck Bison 3204/DIN6350, Ø 250 mm spindle dead center longitudinal stop for 1 position coolant equipment full length rear splash guard leadscrew and shaft protection safety guard for the chuck toolholder guard levelling bolts and plates quick release tailstock low voltage machine lamp operating manual machine according to ",CE", FURTHER TURNING LENGTHS: turning length1.000 mm € 39.720,- turning length2.000 mm € 42.390,- turning length3.000 mm € 46.740,- turning length4.000 mm € 51.830,- turning l ...

: gebraucht : 1991 : 1681 : ca. 2 Wochen ab Auftragse : Bulgarien : 7900 € : 1 : 580 mm : 2000 mm : 285 mm : 72 mm : 380 mm : 400 mm : DIN55022, Größe 8 : 80 M : 11,2 - 2000 1/min : 0.04 - 3 mm : 255 mm : 140 mm : 75 mm : 5 MK : 200 mm : 7.5 kW : 3550 mm : 1250 mm : 1630 mm : 3450 kg 3-axes digital read out RSF 3-jaw chuck Forkardt Dm. 315 mm steady rest 4x steel holder gap bed type chuck protection machine lamp coolant equipment operating manual in German WITH FOLLOWING DEFECT: the clockwise rotation does not engage, so the hand lever must remain held The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : Bulgarien : 49390 € : 1002.62 € : 630 mm : 2000 mm : 315 mm : 103 mm : 430 mm : 400 mm : 11 : 120 M : 21 : 12,5 - 1250 1/min : 120 : 0.04 - 12 mm/U : 0.02 - 6 mm/U : 0.5 - 120 mm : 60 - 1/4 Gänge/ : 0.125 - 30 : 240 - 1 : 315 mm : 90 mm : 90 mm : 5 MK : 230 mm : 11 kW : 3310 kg driven by manual transmission 3-axes digital readout quick change toolpostAmestra with 4 holders (3 square, 1 round) 3-jaw chuck Bison 3204/DIN6350, Ø 315 mm spindle dead center longitudinal stop for 1 position coolant equipment full length rear splash guard leadscrew and shaft protection safety guard for the chuck toolholder guard levelling bolts and plates quick release tailstock low voltage machine lamp operating manual machine according to ",CE", FURTHER TURNING LENGTHS: turning length1.000 mm € 46.620,- turning length1.500 mm € 47.600,- turning length3.000 mm € 53.540,- turning ...

: gebraucht : 1999 : 1676 : prompt, Zwischenverkauf v : Spanien : 10500 € : 1 : 335 mm : 750 mm : 165 mm : 42 mm : 175 mm : 250 mm : DIN55022-5 Nr. 4 : 60-2000 (9) 1/min : 0.05 - 0.75 mm/U : 0.025 - 0.375 mm/U : 0.5 - 7.5 mm : 60 : 245 mm : 120 mm : 48 mm : 3 MK : 140 mm : 2.2 kW : 1900 mm : 850 mm : 1485 mm : 880 kg 3-Jaw chucks Röhm Dm. 300 mm 4-fold steel holder with 4 inserts Chuck protection Cranking length 120 mm Sliding rotary guard with integrated machine lamp Rear chip splashboard Cooling equipment Lead screw and draw screw cover Foot brake User Manual in English COMPLIES WITH GERMAN UVV &, AUSTRIAN AMVO The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: gebraucht : 2020 : 1658 : prompt, Zwischenverkauf v : Bulgarien : 26500 € : 1 : 400 mm : 1000 mm : 200 mm : 52 mm : 235 mm : 320 mm : 6 : 6 M : 12 : 50-2.240 1/min : 80 : 0.015 - 0.6 mm/U : 0.0075 - 0.3 mm/U : 40 : 0.25 - 7.5 mm : 120 - 4 Gänge/ : 0.0625 - 1.875 : 16 - 480 : 235 mm : 110 mm : 50 mm : 4 MK : 100 mm : 4 kW : 2750 mm : 1100 mm : 1600 mm : 1540 kg driven by manual transmission 3-axes digital readout Fagor 40i quick change toolpostMultifix Type Bwith4 holders (3 square, 1 round) 3-jaw chuck Bison 3204/DIN6350, Ø 200 mm spindle noseNr. 6 DIN 55027 four way rapid traverse device spindle dead center coolant equipment 1 pce. flange plate for lathe chuckØ 200 mm 1 adapter sleeve full length rear splash guard leadscrew and shaft protection safety guard for the chuck toolholder guard levelling bolts and plates quick release tailstock low voltage machine lamp operating manual  ...

: neu : Bulgarien : 71220 € : 1431.52 € : 760 mm : 3000 mm : 380 mm : 132 mm : 520 mm : 560 mm : 11 : 140 M : 17 : 7,5 - 1015 1/min : 150 : 0.039 - 18 mm/U : 0.02 - 9 mm/U : 0.5 - 180 mm : 60 - 1/6 Gänge/ : 0.125 - 45 : 410 mm : 150 mm : 105 mm : 6 MK : 225 mm : 15 kW : 4470 kg driven by conventional transmission 3-axes digital readout quick change toolpostAmestra type Multifix with 4 holders (3 square, 1 round) 3-jaw chuck Bison3295/DIN6350, Ø 400 mm spindle dead center four way rapid traverse device foot pedal brake longitudinal stop for 1 position coolant equipment full length rear splash guard leadscrew and shaft protection safety guard for the chuck toolholder guard levelling bolts and plates quick release tailstock tailstock quill reducer mechanized movement of tailstock low voltage machine lamp operating manual machine according to ",CE", FURTHER TURNING LENGTHS: tu ...

: neu : 2022 : 1672 : prompt, Zwischenverkauf v : Bulgarien : 33100 € : 671.93 € : 1 : 1 : 400 mm : 1000 mm : 200 mm : 52 mm : 235 mm : 320 mm : 6 : 6 M : 12 : 50-2.240 1/min : 80 : 0.015 - 0.6 mm/U : 0.0075 - 0.3 mm/U : 40 : 0.25 - 7.5 mm : 120 - 4 Gänge/ : 0.0625 - 1.875 : 235 mm : 110 mm : 50 mm : 4 MK : 100 mm : 4 kW : 2750 mm : 1100 mm : 1600 mm : 1540 kg driven by manual transmission 3-axes digital readout Fagor 40i quick change toolpostMultisuissewith4 holders (3 square, 1 round) 3-jaw chuck Bison 3204/DIN6350, Ø 200 mm spindle noseNr. 6 DIN 55027 four way rapid traverse device spindle dead center coolant equipment 1 pce. flange plate for lathe chuckØ 200 mm 1 adapter sleeve full length rear splash guard leadscrew and shaft protection safety guard for the chuck toolholder guard levelling bolts and plates quick release tailstock low voltage machine lamp operating manual mach ...

: gebraucht : 1685 : prompt, Zwischenverkauf v : Schweden : 6400 € : 1 : 400 mm : 1500 mm : 195 mm : 52 mm : 270 mm : 12 : 30 - 1300 1/min : 3,3 / 4 kW : 2600 mm : 800 mm : 1300 mm : 1100 kg 4-jaw chuck Röhm Dm. 200 mm quick change toolpost with 3 holder live centre does not comply with German UVV and Austrian AMVO no operating manual The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: gebraucht : 2015 : 1686 : ca. 2 Wochen ab Auftragse : 22800 € : 1 : 330 mm : 1000 mm : 167 mm : 38 mm : 210 mm : 12 : 40 - 2500 1/min : 16 : 0.03 - 1 mm/U : 0.2 - 14 mm : 2 - 56 TPI Gänge/ : 190 mm : 92 mm : 42 mm : 3 MK : 110 mm : 2,2 kW : 1900 mm : 1000 mm : 1550 mm : 685 kg 3-axis digital read out Newall 4-jaw chuck Bison diameter 160mm with inside and outside jaws Quick-change tool post with 1 hold Coolant device Chuck protection Steel holder protection Lead screw cover Machine light Manual brake Operating manual in German with EC declaration of conformity The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

For the environmentally friendly removal of paint and varnish from smooth wooden surfaces such as stairs, doors and windows. Suitable for working with untreated wood. Due to lateral blades, it is suitable for processing rebates. Infinitely variable adjustment of the milling depth. Die-cast aluminium gear housing for optimal heat dissipation and long service life. Reversible HM chisels usable on four sides for a long tool life. Extraction option by connecting an all-purpose vacuum cleaner. • Milling cutter diameter 80mm • Axial milling depth 0-0.3mm • Radial milling depth 0.15mm

Long belt Sanders for intermediate lacquer sanding Technical data: Grinding width: max 2,300 mm, min. 200 mm Workpiece height 8-200 mm 1.Schleifbandmasse 100-120 mm x 9000 mm 2.Schleifbandmasse 150 mm x 9000 mm Pressure plate tape measures 10 x 7280 mm Speed 4-12.5 m / min Suitable for intermediate lacquer sanding Grinding motor power kW 10/16 Total power: 20 kW Machine dimensions approx. B 4590 x L 2344 x H 1640 mm Engine weight 2150 kg