127,532 used machines on RESALE, but how to find them? Machine Search
Automatic labeling machine designed for automatic sticking of self-adhesive labels on cylindrical packages (bottles, jars, cans, etc.) and on packages with rectangular cross-section. After equipping the machine with a packaging orientator, it is also possible to label packaging with irregular cross-section (oval, lenticular, etc.) A single label is stuck on cylindrical packages, while flattened packages can be covered with two labels at the same time. The labeller can work independently or cooperate with other devices in the technological line. It is possible to apply alphanumeric characters to the labels by hot printing through the marking foil. Efficiency: depends on the size of the package and label, up to 3000 pcs / h Max packaging dimensions: length - 80 mm, height - 300 mm Maximum dimensions of labels: length - limited by the size of the package, height - 165 mm ...
Gernep labelling machine type Labetta 4 / 3 / 10 640 A year of manufacturing: 2013 capacity: 7.500 bph work direction: right to left rotation: clockwise Stainless steel bottom frame instead off standard carbon steel bottom frame Format parts for: - 33 cl Vichy – Longneck – 30 cl BNR ; Neck, front and back label. - 2 different front label format parts 33 cl longneck; - 75 cl Bierre Belge bottle Corked; Neck, front and back label. Air driven glue pumps replaced by electrical driven glue pumps. Introduction wraparound labeler 2020, less wet glue labels since then. Incidental residual wet glue labels ran still May 2022 (remaining stocks) - machine conserved. Machine still in bottle line for conveyor use only, but stilll able to run. The machine is still in production until the mid of November 2023
Laboratory roller for coating laboratory sheets (sample sheets) and plastics
Y.O.M.: 1999 No.: 900/1 Scraper and Homo speed-controlled Vertical stroke, double jacket, swivel Temperature gauge, Vacuum, Ystral-Turrax Temperature control device GWK Type teco CS 90 Y.O.M.: 2002 Heating capacity: 9 kW Cooling capacity 23 kW, temperature maximum 95°C Dimensions LWH: 1200 x 800 x 1000 mm Weight: approx. 100 kg
Scraper and homogenizer (Ystral) speed-controlled Vertical stroke, double jacket swiveling with heating and vacuum pump on a mobile cart switchgear, timers, etc. Condition very good Dimensions LWH: 700 x 600 x 1900 mm Weight: approx. 150 kg
shaking machine, laboratory sample vibrators, Manufacturer Gerhardt Type Laboshake LS500 Very good condition, ready for immediate use 230 Volt 800 watts Lcqmcmwr
Pulverisette, Analysette, Laboret 03.502 Lab vibrators according to posted photos. With lid and straps, scope of delivery according to photos. Programs: -Inter -Perm -Micro Adjustable Bfukypvbsu
Kosme Hot Melt Labeller Capacity 8 000 b/h
Sidel Flexible SL90 F8564T/Sm with Cold Glue 8/8/130 S3/E3 Equipped with 3 Cold Glue Modules for front and back body and neck labels on round glass bottles. Bottle min/max height: 150 / 350 mm Bottle min/max diameter: 50 / 100mm Label min/max height: 20 / 120 mm Label min/max length: 20 / 130 mm Speed- Machine will run comfortably 36,000 BPH @ 330ml on Cold Glue . (max speed 72,000)
Used automatic labeling machine for cylindrical packaging, for self-adhesive labels (paper or foil), produced by ETMA, Germany, model R-TB - 150/2000. New: 1995 Marking labels with batch number / expiry date: hot-stamping.
Used labeling machine P.E. LABELLERS model Universal M / S 6T / 540 / 2S-2E Power required: 3kW Required pressure (demand): 5 bar (15 l / min) Capacity: 80 pcs / min (jars - 1 format) The device allows labels to be applied to the front and back of the package. The device is equipped with one type of format. When using other formats, it is possible to cover jars of 0.3-0.9 liters. The device has a buffer sensor for jars that are fed into the labeller. A cold label gluing system is used.
Labeler prepared for 3x adhesive labels with hot melt (front/back/safety tab). The labeller was overhauled in 2021 by the manufacturer Gernep, including new electrics according to CE standard. The labeller is equipped for the glass type DTO80. The labeller was in operation for about 200 hours after the overhaul.
Servo Driven Labeller Mfc.: Gernep Built: 2017 Overhauled in 2020 2 cold glue stations for back and front + neck label 1 format for Steinie 3 formats long neck and Appo 33 cl back - front - neck (1 format)
1 IBELUS laboratory HT beaker dyeing machine, type LABIbelus 12 Infra Red, with 1 set of 12 high temperature beakers, maximal dyeing temperature 140º C, dye cycle controller IBELUS type IL-720
1 FERRUM laboratory hydro extractor, maximal loading capacity 2 Kg, 2800 rpm
Wet Glue Labeling Machine Gernep Labetta Built in 1999 Round Runner Type 3/2/6 BR Chest, neck - back label Bottle Type 0.33 + 0.50 + 0.70 + 1.00L Glass Bottle 5,000 bph Running direction left - right Clockwise
Labelling machine for labelling various packages or products such as boxes, bags, cartons. - Specifications Labeller: Label width: 15-130mm, or customized | product dimensions: L(50-250)xW(80-300)xH(0.1-30)mm, customized adaptations possible | max. speed of the machine in neutral: 100 cycles/minute | power: 1kW, 220V | machine dimensions: L2000xB600xH1750mm | weight: 250kg. Module for hot stamping for BBD, batch number etc. optionally available. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.
Labelling machine for labelling various packages or products such as boxes, bags. - Specifications Labeller: Label width: 20~210 mm, Label height: 20~314 mm | product dimensions: L(40-400)xW(40-300)xH(0,2-120) mm | max. speed of the machine in neutral: 120 cycles/minute | accuracy: ?1 mm | power supply: 220V, 50Hz | machine dimensions: L2130xW760xH1300mm | weight: 185kg. Module for hot stamping for BBD, batch number etc. optionally available.. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.
Fully automatic sticker labelling machine for a wide range of products and packaging (cartons, boxes, beverage multipacks such as sixpacks and many more). The labeller can be easy integrated into any line, in principle, by adding it to a conveyor belt, for example. The labelling unit is adjustable in the height. The labelling unit is controlled by a PLC and operated by a touch screen. - Specifications: label length: 6-250mm | label width (backing paper width): 20-150mm | inner diameter of the label roll: 76mm | max. outer diameter of the label roll: max. 240mm | label precision: ?1 mm | max. speed of the machine in neutral: 150 cycles/minute | power: 220V, 50Hz/60Hz | machine dimensions approx.: L950xW900xH1480mm | weight: 70kg. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new ...
Fully automatic paper labelling machine with PLC control or touch switch knob control, photoelectric device, variable speed motors and conveyor chain. - Specification: label length: max. 300mm | label width: max. 120mm | max. speed of the machine in neutral: 83 cycles/minute | power: 220V, 50Hz/60Hz, 1.75kW | machine dimensions: approx. L2440mm?W1000mm?H1300mm | weight: approx. 800kg. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.
Fully automatic paper labelling machine for applying labels on both sides (back and front). PLC controlled or touch switch knob control, photoelectric device (LEUZE sensor), variable speed motors and conveyor chain board. - Specification: label length: 10-250mm | label width: 10-150mm | bottle diameter: customized | label core diameter: 76mm. max. label roll diameter: 300 mm. Label precision: ? 1mm | max. speed of the machine in neutral: 150 cycles/minute | power: 220V/380V, 50Hz/60Hz, 750W | machine dimensions: L2400mm?W1500mm?H1400mm | weight: 400kg. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are po ...
Fully automatic labeller for small vials, ampules or other cylindrical products made of glass or plastic. The labeller has a magazine with a capacity of approx. 200 vials or ampules (depending on their diameter), which are transported separately to the labelling unit between conveyor rollers. After labelling, the products are discharged via a small chute. The labeller is PLC controlled and operated by a touch screen. The separator, the roller conveyor belt and the labelling unit are driven by servo motors, each with its own drive. So, the labeller can be optimally adjusted to your requirements. 3-line ribbon printer for e.g. date printing, batch number, BBD, included. - Specifications: Product diameter: 10-30mm | label length: 10-314mm | label width (backing paper width): 20-130mm | inner diameter of the label roll: 76mm | max. outer diameter of the label roll: max. 280mm | label precisi ...
Fully automatic paper labelling machine with PLC controlled or touch switch knob control, photoelectric device, variable speed motors and conveyor chain board. - Specifications: label length: 250-600mm | Label width: 65-195mm | bottle diameter: 80-190mm | inner diameter of the label roll: 76mm | max. outer diameter of the label roll: 300mm | label precision: ? 1mm | production capacity: max. speed of the machine in neutral: 33 cycles/minute | power: 220V, 50Hz/60Hz | machine dimensions: L2000mm?W900mm?H1500mm | weight: 350kg. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are ...
Fully automatic labeller for bottles, cans, containers. PLC control, operation via touch monitor. Variable speed motors and conveyor chain board. - Specifications: label length: 6-260mm | label width (backing paper width): 10-150mm | bottle diameter25-130mm | inner diameter of the label roll: 76mm | max. outer diameter of the label roll: 300mm | label precision: ? 1mm | production capacity: max. speed of the machine in neutral: 40 cycles/minute | power: 220V, 50Hz/60Hz. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.
Manufacturer: CIMEC Model: Labeling Machine Year of Manufacturing : 2013 Power: 1.5 kW Voltage: 400V Phase: 3 Phase + Neutral + PE (Protective Earth) Frequency: 50 Hz CE Marked: Yes Additional Information: The machine comes with parts compatible with the following bottle formats: - 33cl Long Neck - 50cl Long Neck - 27.5cl Long Neck Find more here - / Contact us at -
Marel concept 500 labelling machine, - top and bottom labelling machine
Mettler Toledo labelling equipment., More information soon.
Mettler Toledo PAS 3012 check-weigher with labeling machine., The labeling had can be electrically moved in all directions for an accurate positioning of the labels., - Max. weight: 6KG, - Min. weight: 0.020KG, - E: 0,001KG, - Rated for 70 packs per minute
Height=1.47 m, Overall length= 1.5 m, Overall width= 1.75 m, Net weight= 40 kg,
1 JAMES HEAL type Wascator FOM 71 MP-Lab Standardised European Washing Machine, approved for IEC and ISO standarts, capacity 7 Kg, power consumption 5,4 KW, voltage 400V, 3N, 50 Hz, material stainless steel, dimensions 740x640x1080 mm, net weight 160 kg, made in Sweden. Machine is in an immaculate condition and looks like new.
A rotary labelling machine for bottles from the manufacturer GERNEP GmbH is offered. Front and back labels, wet glue/cold glue units, self-adhesive units. Inspection by arrangement possible.
This automated label applicator was used for inline labeling of products.
GERNEP Labetta labeling system. Built in 2013 with 11 bottle positions, 3 self-adhesive label dispensers and 2 wet glue label dispensers. Output 6K bottles per hour. Servo plate (also for cans). Self-adhesive formats available: 200ml/ 330ml/500ml/750ml. Wet glue format available: 200 ml other formats can be retrofitted. Incl. treadmill and turntable. For more details, please contact us.
General SKU226P207 LocationBarneveld Make BUCHER-GUYER SA (CH) TypeKHL 50 No.70903 Pressure Working pressure0.51 Bar Main Features Size length500 mm Sizes width500 mm Stroke290 mm Specified Features - Laboratory press Laboratory presscheck Stroke+/- 290mm Upper plate dimensions500x500mm Dimensions lower plate500x500mm Number of platens2 Column presscheck Number of columns:4 Column diameter60mm Electric heated platens(2x)1720watt Platens can be cooledcheck With hydraulic unitcheck Motor2,2 KW, 220/380 Volt Electric capacity18 KW Information Year of construction1979 With switchgearcheck Floorspace2,3x1,4 M Total height2,7 M Weight2600 KG Extra Specificationspressplate size: 500x500 mm press force: 50 Mp press force at 200°C: 5 kp/mm² press force at 250°C: 2,5 k/mm² Technical specs Extra informationindicated size is platen sizeLaboratory pressesBucherP ...
Used Used labeller Cavagnino&Gatti 4.000 bph: Year: 2002 Condition: As Is Used Labelling machine Cavagnino & Gatti Year: 2002 Speed: 4.000 bph Clockwise direction Bottle? s equipment for conical bottle ? 78 diameter 2 adhesive station to apply: Front Back 1 glue station to apply ?I? seal Safety protection Code: EA 84 More details: https://bottlingscout.com
Used Used labeller Ave adhesive 6.000 bph: Year: 1997 Condition: As Is Used labelling machine AVE Year: 1997 Clockwise direction Machine with 8 heads Speed: 6.000 bph ? Nr 3 adhesive station (front ? back ? neck) ? Nr 1 glue station to apply ?l? seal Bottles equipments: ? Bot. Bordonica cl 20 ? diameter 51 ? Bot. Primavera cl 50 ? stintino cl 50 ? diameter 63 ? Bot. Bordolese cl 70 ? diameter 73 ? Bot. Mestrino cl 100 ? diameter 87 ? Bot. Monovitigno of cl 70 shaped 60?100 ? Bot. Borgognotta cl 70 ? diameter 81 ? Bot. Marilina cl 70 ? diameter 84 ? Bot. Vermouth cl 70 ? diameter 71 ? Bot. Ampolla cl 50 ? diameter 102 ? Bot. Aspect (balck) cl 70 ? diameter 82 ? Bot. Amaretto cl 70 shaped100x61 Safety protections Code: EA 86 More details: https://bottlingscout.com
Used Used labeller Cavagnino&Gatti 5.000 bph: Year: 2008 Condition: As Is Used labeller CAVAGNINO&GATTI 9T 3S Year: 2008 Speed: 5.000 bph Direction: Counterclockwise 9 heads 3 adhesive stations Safety protections Code: EA 438 More details: https://bottlingscout.com
Used Used labeller P.E. 4.500 bph: Year: 1998 Condition: As Is Used labeller P.E | 8T adhesive Year: 1998 Speed: 4.500 bph Direction: Counterclockwise 8 heads Nr.3 adhesive stations Nr. 2 cold glue stations Safety protections Code: EA 448 More details: https://bottlingscout.com
Used Used labeller Sacmi Opera 400 OPP Roll-fed: Year: 2003 Condition: As Is Used labeller Sacmi Opera 400 OPP Roll-Fed Year: 2006 Speed: 50.000 Bph Direction: Counterclockwise Model: Line Lc Number of heads: 32 Bottle formats: 0.5L PET Dimension minimum and maximum for the bottles: ? 42-70 mm Height 150-370 mm Dimension minimum and maximum for labels: lenght 138-234 mm Height 30-175 mm Safety protections Code: EA 575 More details: https://bottlingscout.com
Used Used labeller Cavagnino&Gatti 10.000 bph: Year: 1999 Condition: As Is Used labeller Cavagnino&Gatti Year: 1999 Speed: 10.000 Bph Model: CG84CLR/20/2HPS Direction: Clockwise Number of heads: 20 Number of stations: 3 cold glue stations 2 adhesive stations (need to be reconditioned) Type of application: Front label Back label DOCG Bottle formats: 0.375, 0.750l bordolesi, borgognotte and 1.5 l Safety protections Code: EA 628 More details: https://bottlingscout.com
Used Used labeller Cavagnino&Gatti 2.500 bph: Condition: As Is EA 632 | LABELLER CAVAGINO&GATTI Year: N/A (completely overhauled by C&G in 2010) Speed: 2.500 Bph Direction: Clockwise Capsuler PVC Without distributor Number of heads 4 Numero of stations: 3 Nr.2 adhesive stations Nr.1 Cold glue station Application: front Back Collar Additional ironing on exit Without accumulation table Safety protections Code: EA 632 More details: https://bottlingscout.com
Used Used labeller Kosme 4.000 bph: Year: 2003 Condition: As Is USED LABELLER KOSME Year: 2003 Speed: 4.000 Bph Direction: Clockwise Number of heads: 8 Number of cold glue stations: 3 Type of application: Front label Back label Collar Additional ironing on exit Safety protections Code: EA 627 More details: https://bottlingscout.com
Used Used labeller P.E. Rollmatic 12.000 bph: Year: 2009 Condition: As Is EA 635 | LABELLER P.E ROLLMATIC 12T | 12.000 BPH Year: 2009 Speed: 12.000 bph Direction: Counterclockwise 12 heads Subitale formats: 1.0 LT | 1.5 LT Label: Wrap-around | OPP hot melt Safety protections Code: EA 635 More details: https://bottlingscout.com
Used Used Labeller 9T CE 5.000 bph 2018: Year: 2018 Condition: As Is Year: 2018 Speed: 5000 BPH Direction: Clockwise Electric carousel regulation 9 plates with electronic cams 4 station agganciabili 2 cold glue station 2014, reconditioned 3 station carrellate 2016, reconditioned for adhesive non-stop label 1 station carrellata 2016, reconditioned for adhesive label Optical centering setup Safety protection Code: EA 672 More details: https://bottlingscout.com
PLASTIMAC LAB EXTRUDER, for blown film, suitable for testing granulate, 25 mm screw diameter, 70 mm diam. die, 500 mm collection frame, 7,5 Hp drive, complete wuth supporting structure, (corona treatment+small printer can be sold separately if required), installed power - used power in work: about 60-65% : 7,5 Hp, working width: 500 mm, conditions: good
BLOWN FILM LAB EXTRUDER, suitable for testing granulate, 25 mm screw Ø 25 L/D, 60 mm diam. die, 500 mm. pull off, 350 mm collection frame, 7,5 kW drive, complete with tower, nips and rolls, control panel, production rate 10 kg/h, installed power - used power in work: about 60-65% : 7,5 kW, working width: 350 mm, conditions: checked
LAB FILM EXTRUDER BETOL 2525, for testing granules, single screw extruder, screw Ø 25 mm, blown film die head 60 mm., 3,0 kw d.c. motor and drive., 4 heating zones on barrel., 2 die head heating zones, cooling on screw and throat, calibration cage, nips and rolls, tower, 500 mm wide double collection frame, control panel, type: lab extruder
Machine is in very good condition and swing-top bottles can also be driven 0.5l Bracket 0.5l Euro 0.33l Longleg
For sale is a labeling machine from the manufacturer Gernep. The machine was completely overhauled in 2021 and was only rarely used afterwards. Currently, the machine does not have the unit for back labeling installed, but it would be available if required. Technical data: Manufacturer: Gernep Model: Labetta 4/3/8 Year: 2001 Capacity: 8,000 bph Bottle type: Euro bottle - Control: Siemens S7, machine is frequency controlled via a FU - Inlet/outlet: left/right Please inquire for further data.
For sale is a labeling machine from the manufacturer Gernep. The machine was completely overhauled in 2021 and was only rarely used afterwards. Currently, the machine does not have the unit for back labeling installed, but it would be available if required. Technical data: Manufacturer: Gernep Model: Labetta 4/3/8 Year: 2001 Capacity: 8,000 bph Bottle type: Euro bottle - Control: Siemens S7, machine is frequency controlled via a FU - Inlet/outlet: left/right Please inquire for further data.
maximum number of results exceeded
please refine your search
