l beh 3000 used for sale

Bar max: 8 m3/h: 211 KW: 22 V / P / Hz: 400 / 3 / 50 min - 1: 3000 Kg: 465

Bundle/Stream feeders Built in 2001; working condition

This machine is particularly suitable for the processing of electrical waste with PVC and rubber. Diameter range 2 - 115 mm Cutting speed 35 meters per minute Weight 350 kg

Hydraulic press brake. Working length: 3.000mm. Pressing force: 200Tn. Back gauge.

Technical data: -max load capacity 3000 kg -Faceplate cross 1600 x 1600 mm -Faceplate cross extension tubes - faceplate cross mot. adjustable 0-90 / 135 ° - rotation infinitely variable 0,01-4 U/min -Right - + rotation control -Transmission of welding current approx. 500 A -400 V - table height in horiz drive. Position without stand approx. 1200 mm -Table height at horiz. Position with frame approx. 2200 mm -Space requirement approx. B H 1600 x 1200 + 1000 X 2400 mm -Weight approx. 2700 kg

CNC WORKING CENTER type ALBERTI EDIT 3000 composition : 1. boring unit ( axe X and Y ) , vertical nad horizontal independent mandrins 2. vertical router 3. horizontal router CNC 90 by TPA volt. 380/50

Execution: Aggregate type: stationary Execution: Skid frame Technical data engine: Engine manufacturer: MTU Engine: 20 V 4000 G 34 F Engine No.: in production Power: 2590 KW Cooling: Water-cooled Occasion: Electric 24 V DC Speed: 1500 rpm Fuel: Fuel oil EN 590 Technical data generator: Generator manufacturer: Stamford AvK Generator type: Synchronous with AVR Gene. No.: in production Generator power: 3000 kVA Voltage: 400 / 231 Volt Power factor: Cos. - PHI 0.8 Speed: 1500 rpm Switchgear: Execution: Automatic start Functions: Emergency power operation Switch: Generator switch 4 poles Delivery: Built Tank: Execution: Base frame tank with drip pan Content / liter: 2000 Dimensions of the power unit: Width approx. mm: 1.887 Height app ...

Treatment table, as new, for the Piezolith 3000 Lithotripter Wolf

Machine type MIG/MAG welding system Make MERKLE Type RedMIG 3000 D Connection voltage 3 x 400 volts Setting range 25 - 280 amperes Switch-on time 35% ED at 280 amperes 60% ED at 240 amperes Current setting 14 switching stages Cooling transformer by built-in fan Cooling burner gas-cooled Execution of mobile industrial plant with separate DV case Wire feed 4-wheel gearbox DV 26 Hedging 16 Ampere Dimensions L x W x H 940 x 445 x 1,040 mm Weight 140 kg Special accessories VB-cable 1.6 mtr. Long Age 9 months Condition very good, as new Scope of delivery Welding system with the following accessories: 1 piece welding torch SB 307 G, 3 mtr. Long 1 piece ground cable 4 mtr. long, 35 sqmm 1 piece pressure reducer argon with 2 pressure meters 1 roll welding wire D-300 coil, 5 kg 1 can of non-stick spray 1 piece hand shield 1 piece pro ...

TRUMPF TruPunch 3000-1300 (S11) punching machine was built in Germany in 2013. The reliable machine with extensive equipment and modern components offers its user unparalleled precision and accuracy in machining both thick and thin sheet metal. In addition to standard punching and marking, the punching machine also allows fast grooving, surface embossing, forming and chipless threading in stainless steel, structural steel and aluminium. On the machine’s sturdy and welded C” shaped structure, sits a specially designed brush table with integrated balls, designed to facilitate the loading and unloading of workpieces. The use of this type of table prevents scratches and nicks from appearing on the surface of the sheet, which results in a significant increase in the quality of the machining. During the entire production process, the sheet is held rigidly by hydraulic clamps fixed to th ...

EinspannmaÃ?e: 1600 mm x b: 2900 mm frame: 1600 mm x b: 2600 mm â?¢ Pression-Druck by 1T, self-locking, 140 mm â?¢ Versatility - many applications (frame, body, surface gluing) â?¢ Workload - ergonomic posture â?¢ Save time with user-friendly operation â?¢ Frame are bolted and therefore can be disassembled â?¢ Pressing units galvanized G & FE-RPW-3000PL

Type SAXW 63/3000 Producer WMW Meuselwitz Year of manufacture 1979 Parameters 63mm, 3000mm Location Praha CZ Swing 750 mm Distance between centres 3000 mm Max. weight of workpiece 6000 kg Machine suitable for modernisation

Key data: 2400 KW, 3000 kVA, 400 V

ENGINE: MTU 20V4000G63 FREQUENCY (HZ): 50 VOLTAGE (V): 400 POWER: 3000kVA / 2400kW CYLINDERS: 20 STARTING: ELECTRIC CONTROL SYSTEM: SELF-CONTROL FUEL TYPE: DIESEL COOLING: WATER-COOLED WEIGHT: 24500kg DIMENSIONS L/W/HEIGHT (MM): 830029502550 The engines are new, complete including control, diesel tank, exhaust and batteries. Network monitoring, grid feed-in Soundproofed Immediately ready for use. Control: Deep Sea Electronics (DSE) / ComAp Alternator: Leroy-Somer / Stamford Additional: Automatic Transfer Switch (ATS) 63A/100A ABB & Schneider Disconnectors GenCloud Connect with a phone or computer Single-phase valve 50°C-55°C Radiator External Diesel Tank Lubricating Oil Heater Water Heating Dispatch: Worldwide transport including unloading is possible for an extra charge To be able to quote an exact freight price, please send us an inquiry with ...

Key data: 2400 KW, 3000 kVA, 400 V

MODEL: EQ-MTU30002400 ENGINE: MTU 20V4000G63 FREQUENCY (HZ): 50 VOLTAGE (V): 400 POWER: 3000kVA / 2400kW CYLINDERS: 20 STARTING: ELECTRIC CONTROL SYSTEM: SELF-CONTROL FUEL TYPE: DIESEL COOLING: WATER-COOLED WEIGHT: 24500kg DIMENSIONS L/W/HEIGHT (MM): 830029502550 The engines are new, complete including control, diesel tank, exhaust and batteries. Network monitoring, grid feed-in Soundproofed Immediately ready for use. For these sizes, we recommend a parallel system. Control: Deep Sea Electronics (DSE) / ComAp Alternator: Leroy-Somer / Stamford Additional: Automatic Transfer Switch (ATS) 63A/100A ABB & Schneider Disconnectors GenCloud Connect with a phone or computer Single-phase valve 50°C-55°C Radiator External Diesel Tank Lubricating Oil Heater Water Heating Dispatch: Worldwide transport including unloading is possible for an extra charge To be able to q ...

all stainless steel electrically heated 85 kW frying length 3.000 mm belt width 500 mm mechanical lid oil level control Teflon-infeed oil circulation pump filter sediment removal system hoists fire protection total length ± 6.300 mm total width ± 1.500 mm total height ± 3.310 mm

Make: KHS Innopack Type: Guarantee A 1-3000 Built: 1995 Power: 4,200 containers/h at 3 x 4 and 5 x4 bottles/containers with 10 gripper heads (manufacturer specification) and 10 GDB boxes transverse Dimensions: (LxWxH) 4000x2350x2400 Max package dimensions: 3,000 X 440 X 380 mm (LxWxH) Control: S5 Format parts: for 0.25 / 0.5 / 0.7 ltr. GDB Bottles and Boxes Special feature: Format part change with electric pulley Condition: good

suitable for thermal oil heating 9 kW with lower and upper belt with Teflon infeed belt 1.200 mm extra product infeed belt outfeed belt suitable for fire protection suitable for CIP-cleaning frying length 3.000 mm belt width 700 mm adjustable speed oil circulation pump oil level control sediment removal system filter lifting unit with hoists dimensions (l x w x h) : ± 6.850 mm x 2.000 x 3.400 mm

Key data: 3560 mm, 2466 , 1800

Machine type: EVP 3000 Manufacturer: ERBA Power kW: 15 Total volume: 3000 lt. Description: The EVP 3000 vibratory finishing machine from ERBA has a flat work container base without separation. Emptying or separation is carried out via bottom emptying (manual/pneumatic). It has an electrical control cabinet and can be equipped with a fully automatic PLC process control (optional). On request, a reinforced suspension and a reinforced motor can be installed for higher loads. The motor speed can be infinitely variable by means of a frequency converter (optional). The price quoted is net plus the currently valid statutory sales tax and plus freight costs. The pictures can show the system including accessories, which are optionally available and associated with additional costs. The price quoted refers to the basic machine. These are sample photos. The actual appearance and size m ...

Technical data for the shelving system: Shelving system: SSI Schaefer Type: R 3000 Technical data for the installation: Number of rows of shelves: 01 pcs. Shelf length: 1,056 mm Number of fields per row of shelves: 01 pcs. The scope of delivery includes: 02x Shelf stand, used Material colour: sendzimir galvanised Frame profile dimensions: 31 x 60 mm incl. gravel bars and base plates The stands are pre-assembled 2,494 mm high 400 mm deep 02x Shelf, used Designation: ZB 4423 V Material colour: sendzimir galvanised Dimensions: 994 x 400 x 30 mm Weight | Pcs.: approx. 4.65 kg Max. load per shelf 200 kg at the same weight. Distributed load 01x Plinth panel, used for floor length: 994 mm Material colour: sendzimir galvanised Dimensions: C 28 x 22 x 8 x 0.6 mm Weight | Pcs.: approx. 0.51 kg 05x Shelf crossbar, second choice (new) Material colour: sendzimi ...

We offer a highly productive 3D printer for industrial series production Trumpf TruPrint 3000 The 3D printer has already been dismantled by the manufacturer Disassembly logs are available as well as functional logs that prove that the machine was in operation before dismantling All axles are professionally secured The machine can be transported on a normal standard truck Faster to a high-quality 3D component D1. Machine concept The TruPrint 3000 is a universal medium format press with external parts and powder management for industrial production Complex metallic components by means of 3D printing. Through your large construction volume, it offers a high degree of flexibility in terms of Size, number and geometry of each application. Bcu70Qrgxc Specifications TruPrint 3000 Build volume (cylinder) mm x mm Ø 300 x H 400 Processable materials5 - Weldable metals i ...

Manufacturer: Cefla, Type: TR 3000/A-D, Year: 2015, incl.control: yes, Length-width mm: 3000x1300, Programming possible: yes, Length mm: 3000, Working widht mm: 1300, Total hight mm: 900, Conveyor speed m/min: 20, Drive power kW: 0,8, Year :2015

Manufacturer: Cefla, Type: TR 3000, Year: 2015, incl.control: yes, Length-width mm: 3000x1300, Length mm: 3000, Working widht mm: 1300, Total hight mm: 900, Conveyor speed m/min: 20, Drive power kW: 0,8, Year :2015

Year :1997

Servo Electric punching head Large format 3000 x 1500mm With Sheet Master & Duplex carts Year: 2015 Just under 19,000 hours! With tooling

TECHNICAL DATA: Max working length mm: 3100 Min workable length mm: 500 Tilting blade: 0-45 ° Blade diameter max mm: 300 02 Saw aggregates Ø 300 + 02 Scoring aggregates - Ø 120 Central Saw Aggregate Automatic destacking 4-axis numerical control Total electric power KW: 10 Weight Kg: 2200

working lenght 3.050 mm power 60 ton throat deepth 350 mm CNC cybelec nr.02 axes back gauge manual table compensation

Offer 22187 Roller conveyor height-adjustable Specifications: - Height-adjustable roller conveyor with spring support and locking mechanism - With clamping lever - Roller conveyor length approx. 3000 mm -Min. Roller conveyor height approx. 600 mm - Max. roller conveyor height approx. 1100 mm - Roll width outside approx. 280 mm - Roll length 2 x 125 mm each - Roll diameter approx. to max. 100 mm - max. possible number of rolls 10 pcs - 7 pairs of rollers are built-in - Total width of the roller conveyor approx. 500 mm - Total length approx. 3200 mm - Weight approx. 250 kg

PLATE BENDING MACHINE FACCIN - 4 ROLL HYDRAULIC 3000 X 40 MM - MODEL 4HCI3-35/30 YEAR 1990 /2025 PLATE BENDING ROLL LINEAR GUIDEWAYS DOUBLE PINCH PRE-BENDING Machine in good working condition Bending capacity -Plate width : 3000 mm -Rolling plate thickness 40 mm - Prebend thickness 35 mm Rolls dimensions: -Useful length 3050 mm -central rolls upper/lower D 470 mm -side rolls left/right D 420 mm • Hardening of the 4 rolls high strength surface • 3 rolls driven powered with gear unit with hydraulic motor • Conical bending attachment side rolls tiltable to form cones, contrast pad roller type. • Opening front hydraulic drop-end to unload the closed shell. • Variable speed working roll bending rotation hydraulic speed fas ...

complete stainless steel suitable for thermo-oil heating (= 115 kW) Band length 3,000 mm Track width 400 mm Mesh width ± 10 mm Oil pump Level control Insertion tape Executable mechanical lifting device infinitely variable speed Dirt transport suitable for fire protection %, p/o (L x W x H) : ± 5,200 x 1,700 x 3,100 mm

The ASCO CB 3000 conveyor belt is a reliable and versatile solution for transporting a wide range of bulk materials such as sand, soil, gravel, compost, and building materials. With its sturdy construction and 3-meter length, it handles daily use in demanding environments like construction sites, recycling facilities, horticulture, and industrial operations. The CB 3000 offers adjustable belt speed, angle, and length, allowing it to adapt to different tasks and growing project requirements. Its modular design makes it easy to expand when longer distances need to be covered. An integrated operating hours counter helps plan maintenance and monitor usage efficiently. Designed for long service life and minimal upkeep, the ASCO CB 3000 ensures smooth, continuous material flow as part of screening systems or as a stand-alone conveyor. This robust conveyor belt combines flexibility, dur ...

Code 111263 Description Radial drilling machine Make CSEPEL Model RFH 100 / 3000 Serial No. 73089 Year of make 1975 Drilling Cap. in St. 60 / cast iron 100 / 120 mm Spindle taper 6 MK Spindle radius 3500 mm Min/max height spindle / top of base plate 440 – 2100 mm Arm traverse 1260 mm Spindle traverse 400 mm Number of speeds 21 steps Speed range 18 – 1800 rpm Feed range 18 0,0375 – 2,0 mm/rev. Working surface bed plate 3160 x 1550 mm Motor 15 kW – 380 Volts Total power 20 kVA Dimension 4390 x 1550 x 4130 mm (L x W x H) Weight of machine 14.000 kg Accessoiries Box 1000 x 1000 x 500 mm Automatic Clamping Cooling Condition Machine is in good condition

Very high-quality CNC – controlled precision sheet metal bending machine with automatic bending sequence calculation – automatic CNC – controlled double-sided pre-bending – conical bending device, three hydraulically driven rollers (one hydraulic motor per roll), hydraulic linear sub-roll adjustment – hard chrome-plated piston rods – hardened and ground rollers - PILZ® laser protection - BECKHOFF® CNC – control with Ethernet technology and large touch screen - DANFOSS® precision hydraulics – central lubrication system Maximum bending length 2,000 mm Roll diameter 170 mm Smallest weft diameter = 1.1 x the roll diameter The rollers run in bronze plain bearings. Nominal pre-bending performance over the entire bending length at 5 x D = 5 mm for sheet steel/ST40 Nominal bending performance over the entire bending length at 5 x D = 7 mm sheet steel/ST40 Drive power  ...

Hydraulic swivel bending machine - ordering machine (delivery time approx. 10-14 weeks), incl. hydraulic dynamic crowning, touch screen, Pressure regulation of the upper cheek, backgauge (1000mm), goat feet with automatic tool clamping, electr./hydr. Adjustment of the bending cheek -Illustrations similar-

pressure: 140 t chamfer lenght: 3000 mm distance between columns: mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Stocknumber 2010012 Type of machine Pressbrake Make COLLY Type 3000/140 Build in nb Chamfer lenght 3000 mm Pressure 140 ton Stroke 250 mm Throat 310 mm Daylight 520 mm Additional information incl. 1 set of tooling The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Offer 26038 The slab can be viewed at the 02943 Boxberg location by appointment. Technical data approx.: - Plate length approx. 3000 mm - Plate width approx. 2500 mm - Top height without base approx. 350 mm - Top height with base approx. 870 mm - Thickness of the top plate approx. 75 mm - 9 T-slots in table surface length 6000 mm - Center distance of the T-slots in the table surface 250 mm each - Center distance of the T-slots from outer edge 125 mm - T - groove width approx. mm - T - groove depth approx. mm - Space required: L 3000 x D 2500 x H 870 mm - Weight approx. 8000 kg

sheet width: 3050 mm plate thickness: 25 mm distance between columns: mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Very high-quality CNC – controlled precision sheet metal bending machine with automatic bending sequence calculation – automatic, CNC – controlled double-sided pre-bending – conical bending device Roll diameter 350 mm Smallest weft diameter 1.1 x the roll diameter = 385 mm Maximum bending length 3,000 mm Nominal pre-bending performance over the entire bending length at 5 x D = 18 mm for sheet steel/ST40 Nominal bending performance over the entire bending length at 5 x D = 22 mm sheet steel/ST40 Drive power 22 kW Weight 13,500 kg. Three hydraulically driven rollers (one hydraulic motor per roller) - The rollers run in bronze plain bearings Hydraulic linear sub-roller adjustment Hard chrome-plated piston rods Hardened and ground rollers PILZ® Laser Validation BECKHOFF® CNC – Control with Ethernet technology and large touch screen DANFOSS® Precision Hydraul ...

Very high-quality CNC – controlled precision sheet metal bending machine with automatic bending sequence calculation – automatic, CNC – controlled double-sided pre-bending – conical bending device Roll diameter 350 mm Smallest weft diameter 1.1 x the roll diameter = 385 mm Maximum bending length 3,000 mm Nominal pre-bending performance over the entire bending length at 5 x D = 18 mm for sheet steel/ST40 Nominal bending performance over the entire bending length at 5 x D = 22 mm sheet steel/ST40 Drive power 22 kW Weight 13,500 kg. Three hydraulically driven rollers (one hydraulic motor per roller) - The rollers run in bronze plain bearings Hydraulic linear sub-roller adjustment Hard chrome-plated piston rods Hardened and ground rollers PILZ® Laser Validation BECKHOFF® CNC – Control with Ethernet technology and large touch screen DANFOSS® Precision Hydraul ...

Very high-quality CNC – controlled precision sheet metal bending machine with automatic bending sequence calculation – automatic, CNC – controlled double-sided pre-bending – conical bending device Roll diameter 350 mm Smallest weft diameter 1.1 x the roll diameter = 385 mm Maximum bending length 3,000 mm Nominal pre-bending performance over the entire bending length at 5 x D = 18 mm for sheet steel/ST40 Nominal bending performance over the entire bending length at 5 x D = 22 mm sheet steel/ST40 Drive power 22 kW Weight 13,500 kg. Three hydraulically driven rollers (one hydraulic motor per roller) - The rollers run in bronze plain bearings Hydraulic linear sub-roller adjustment Hard chrome-plated piston rods Hardened and ground rollers PILZ® Laser Validation BECKHOFF® CNC – Control with Ethernet technology and large touch screen DANFOSS® Precision Hydraul ...

Electric heating: 28 KW Adjustable air circulation Pneumatically controlled fresh air, exhaust air, and smoke damper Cleaning: foam cleaning Smoke feeding: on customer request Smoking material: wood chips Without the after-burning system Installation dimensions of the machine in cm: Width: 150 Length: 145 Height: 275 Trolley dimensions in cm: 100100200 height Delivery time: 30 working days after advanced payment

Continuous vacuum filler for straight filling and portioning All in one 250 liter hopper with counter arm and reinforced scraper, tipping, and hopper lock Hopper inlet 100 mm diameter Integrated vacuum pump Integrated lift Standard double screw housing Machine dimensions in cm: 200x120x200 Delivery time: 10 working days after advanced payment

planetary gearbox, 582 32 025, n1 3000rpm, i=10,8, 5,7KW, Atlanta, new Please note: This is an original product and not a replica from... Special price If you have a VAT number, we will be happy to issue you with an invoice without VAT. New! - never been used and is completely new, - comes from a spare parts warehouse of a certified production facility, Technical specifications: - 5.7 kW, n1 3000 rpm, i = 10.8 Connection on motor side: - Shaft D40 mm, centring D162 mm, pitch circle D184 z=4 Output side connection: - Bore D24 mm, centring D130 mm, pitch circle D165 mm z=4 Design without additional base plate 6 months warranty We give you 6 months warranty for these goods from the date of invoice. In case of any defect, which is not the fault of the buyer, the goods can be returned. We will refund the buyer only the product price paid to us. Updating in case of  ...

planetary gearbox, 582 32 027, n1 3000rpm, i=10,8, 5,7KW, Atlanta, mint condition Please note: This is an original product and not a replica from... Special price If you have a VAT number, we will be happy to issue you with an invoice without VAT. Mint condition! - never been used and is in mint condition, - comes from a spare parts warehouse of a certified production facility, - has very slight storage marks, no effect on function - The gearbox was open stored and contaminated with oil mist, which was very difficult to clean. Technical specifications: - 5.7 kW, n1 3000 rpm, i = 10.8 Connection on motor side: - Shaft D40 mm, centring D162 mm, pitch circle D184 z=4 Output side connection: - Bore D38 mm, centring D180 mm, pitch circle D215 mm z=4 Design with additional base plate 23mm thick 6 months warranty We give you 6 months warranty for these goods from t ...

planetary gearbox, 582 32 025, n1 3000rpm, i=10,8, 5,7KW, Atlanta, used Please note: This is an original product and not a replica from... Special price If you have a VAT number, we will be happy to issue you with an invoice without VAT. Used! - comes from a spare parts warehouse of a certified production facility, - the part was dismantled from a machine, Technical specifications: - 5.7 kW, n1 3000 rpm, i = 10.8 Connection on motor side: - Shaft D40 mm, centring D162 mm, pitch circle D184 z=4 Output side connection: - Bore D24 mm, centring D130 mm, pitch circle D165 mm z=4 Design without additional base plate Ensuring the function: In order to ensure the functionality of the goods, the buyer must check the goods at the time of acceptance or put them into operation. In case of any defect, which is not the fault of the buyer, the goods can be returned within 2  ...

Washing screw stainless steel, screen basket wash screw, drum sieve, blanching drum used, Manufacturer: WOLFF Type: B 1000/3000 Diameter approx. 1000 mm, Drum length approx. 2800 mm partly stainless steel Drive 0.55 kW Total dimensions approx. 4500 x 1800 x 2200 m. Changes and errors in the technical data and information excepted.

THOFEHRN 3 to Crane Hoist / Wire Rope Hoist Cable winch, incl. control, gearbox + motor, German Crane

Year of manufacture: 2013 CNC Controller: FAGOR 8055TCO Capacity Distance between centers (mm): 3000 Height between centers (mm): 300 Height between centers from the ground (mm): 1200 Grinding diameter (mm): ø 595 Max. workpiece weight between centers (kg): 2000 Max. Workpiece weight with tool (kg): 200 Table (Z-axis) Maximum travel (mm): 3350 Rotating table plate ±5° Feed rate (mm/min): 0.01 ÷ 6000 Minimum programmable increment (mm): 0.001° Grinding carriage (X-axis) Maximum travel (mm): 500 Feed rate (mm/min): 0.01 ÷ 6000 Minimum programmable increment (mm): 0.001° Resolution (mm): 0.0005° Grinding head Left grinding wheel diameter (mm): 600 Peripheral speed (m/s): 45 Workpiece head Spindle speed (rpm): 9 ÷ 250 CM taper: 5 Spindle type: 8" Tailstock Type: Manual handwheel Spindle taper (cm): 6 Maximum spindle travel (mm): 60 Quill diameter (mm):  ...

Pausch X-ray imaging workstation Compact CS 3000 with the following system components Generator Genesis DT_Baujahr 2017 Tube RAD 14 0,6/1,2 Fa. Varian Vertical tripod BS 2000 • Before taking over, all devices or systems have been tested on site for their functionality. • The system is located in our warehouse in Freiberg / Germany. It is packed on pallets, professionally lashed and wrapped with stretch film and can be picked up immediately • You buy the system in "ACTUAL" condition from the warehouse Freiberg (EXW), Saxony, Germany, and advance payment. • The sale takes place as "used", EXW Freiberg, Saxony, Germany, to resellers or dealers despite full functionality without guarantee. • The installation, commissioning and configuration of the system or the system components must be carried out by the manufacturer or by a specialist or technician authorized by t ...