l beh 3000 used for sale

FAS roller conveyors 3000-710-650 RA2403 Further information Manufacturer: FAS Type: Roller conveyor Year of manufacture: unknown Condition: good (used) Available conveyor lengths (FL): 3000 mm, 5000 mm, 6000 mm, 7000 mm, 8000 mm, 9000 mm, 10000 mm, 11000 mm, 12000 mm, 13000 mm, 14000 mm, 15000 mm, 16000 mm, 17000 mm, 18000 mm, 19000 mm, 20000 mm, 21000 mm Roller width (RB): 650 mm Nominal/outer width (NB): 710 mm Roller pitch: 62,5-125 mm variable Drive types: center drive Gewicht Fördergut: bis 30 kg Optionally available e.g: frequency inverter for steples speed control Supports Side guides Price: net plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg Features: Electric data: 380-400 condition: good (used) Conveying length in mm: 20000, 13000, 11000, 21000, 3000, 5000, 6000, 7000, 8000, 9000, 10000, 12000, 14000, 15000, 16000, 17000, 18000, 19000 Nominal / outsi ...

FAS roller conveyors 3000-510-450 RA2402 Further information Manufacturer: FAS Type: Roller conveyor Year of manufacture: unknown Condition: good (used) Available conveyor lengths (FL): 3000 mm, 5000 mm, 6000 mm, 7000 mm, 8000 mm, 9000 mm, 10000 mm, 11000 mm, 12000 mm, 13000 mm, 14000 mm, 15000 mm, 16000 mm, 17000 mm, 18000 mm, 19000 mm, 20000 mm, 21000 mm Roller width (RB): 450 mm Nominal/outer width (NB): 510 mm Roller pitch: 62,5-125 mm variable Drive types: center drive Gewicht Fördergut: bis 30 kg Optionally available e.g: frequency inverter for steples speed control Supports Side guides Price: net plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg Features: Electric data: 380-415 condition: good (used) Conveying length in mm: 21000, 11000, 13000, 2000, 3000, 5000, 6000, 7000, 8000, 9000, 10000, 12000, 14000, 15000, 16000, 17000, 18000, 19000 Nominal / outsid ...

Size: 720 x 1020 mm Impression: 300 Mio. Equipments: Plate Cylinder Cocking blanket wash up device: autom. SAPC semi automatic plate changer Grafix Digitronic powder device wash device for impression cylinders Mitsubishi Delta Dampening Refrigeration & Recirculation System Non-Stop Feeder IPC II Intelligent Press Control high speed separator

Key data: 870 mm, 3000 mm

Turning length: 3000 mm Turning diameter: 870 mm above bed 560 mm over cross slide Weight between tips: 3,600 kg without bezel 4,400 kg with 1 bezel 5,600 kg with 2 bezels Spindle speed: 0 - 900 rpm Spindle bore: 162 mm Control: Fagor Equipped with: - Extra jaw chuck on the rear side of the main spindle - 1 fixed bezel Ø420 mm - 1 rotating bezel - 4-jaw chuck Ø800 mm - 3-jaw chuck Ø 400 mm - 10 tool containers - Coolant and chip container at the rear - Machine documents Country of origin: Spain Motor power: 30 kW Machine weight: 9,000 kg Machine LxWxH: 5.1 x 2.4 x 2.0 mtr.

Fully Automatic Ergonomic Car Platform CEIT FTS CEIT 3000 AFR | 2019 Variant F N02 Maximum movement speed 0.75 m/s, maximum undercarriage weight 3000 kg, crawler weight 375 kg, maximum tractive force 1000 N, operating voltage 36 V=, power 1200 W (unused) Automatic Ergonomic Car Platform CEIT FTS CEIT 3000 AFR Year: 2019 QUANTITY 5 PIECES

Max. cutting height: 100mm, saw blade diameter: 250-400mm, bore: 30mm, carriage length: 2600mm, motor power: 5.5kW, length: 3100mm, width: 2400mm, height: 1500mm, weight: 770kg. On-site inspection is possible.

An ultrasonic welding system with two Telsonic TSP-3000-1P, cabin, generators and documentation is available. Welding force: 2500N, table dimensions: 420x415mm, height adjustment: 250mm, stroke: 100mm, control: Siemens SIMATIC PANEL, length: 762mm, width: 854mm, height: 1316mm, weight: 130kg. On-site inspection is possible.

Welding force: 2500N, table dimensions: 420x415mm, height adjustment: 250mm, stroke: 100mm, control: Telsonic MPS-4, connected load: 4000W, length: 459mm, width: 854mm, height: 1315mm, weight: 130kg. With SICK C4000 safety light curtains, cabin and documentation. On-site inspection is possible.

Load Weight Shelf: 28000 kg Loading weight per level: 2000 kg Number of load levels: 2 x 7 Stk. Recommended material length: 6000 mm Column width: 3000 mm Shelf height: 2440 mm dimensions: 3,7 x 2,55 x 2,4 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 3000 mm Working width: 360 mm Wheel width: 360 mm roll diameter: 60 mm : 900 kg height adjustment: 650 - 1100 mm weight of the machine ca.: 0,050 t dimensions: 3,1 x 0,45 x 0,6 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

rated capacity: 3,0 KW rated current: 16/8,3 Ampere output voltage: 2 x 230AC / 1 x 12DC V tank capacity: 12 l engine output: 7,0 PS weight of the machine ca.: 45 Kg dimensions of the machine ca.: 0,68 x 0,58 x 0,54 m Exhibition machine The Hyundai HHY3000F is a powerful and reliable 3 KW generator. A durable and energy efficient 212CC 4-stroke engine. (7 HP, type R210) reliable backup power for home, office or small workshops. 2 x 230 volt. (16A) AC output and 1 x 12 volt. (8,3A) DC output. With automatic voltage regulators. (exhibition machine) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

impact length: 3000 mm Weight of Material maxium: 300 Kg/m Wheel width: 350 mm roll diameter: 60 mm work height adjustable: 840 - 950 mm weight: 117 kg length in width: 620 mm length in total: 3400 mm Roller conveyors including stop system. Stable execution. are available from 2 to 6 meters in length. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 2200 mm table width: 1500 mm stroke height: 1900 mm weight max. in kg: 3000 kg total power requirement: 1,5 kW stroke speed - idle stroke upwards: 55 sek. stroke speed - idle stroke downwards: 30 sek. connected load frequency: 400 V weight of the machine ca.: 0,650 t dimensions of the machine ca.: 2,2 x 1,5 x 0,3 m The hydraulic lifting tables are electrically driven and operated. Have a contact strip for safe lowering operation. Wide applicability for workshops, assembly departments, loading pits, etc. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

measuring length: bis 3000 mm Tube length: 3280 mm numbers of toolholders: 4 : Rohr galvanisch Verzinkt dimensions: 3,3 x 0,3 x 0,2 m The length measuring system is available for retrofitting existing roller conveyors in lengths from 2 to 6 meters. The running rail made of rectangular tube 60 x 30 x 3. The steel measuring tape is self-adhesive. The magnifying glass with 6x magnification makes it easier to adjust the settings precisely desired length. Danger: This is just the stop system without roller conveyor! The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

welding current: max. 300 A open-circuit voltage: 55 - 76 V connected load frequency: 400 V weight: 150 kg Dimensions (LxWxH): 900 x 400 x 900 mm Accessories for inert gas welding machine: Hose package 4m. Earth cable 4m Accessories for inert gas welding machine: Hose package 4m. Ground cable 4m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Roller conveyor length: 3000 mm Weight of Material maxium: 300 Kg/m Wheel width: 350 mm roll diameter: 60 mm work height adjustable: 840 - 950 mm weight: 95 kg length in width: 620 mm length in total: 3000 mm Roller conveyors without stop system. Stable execution. are available from 2 to 6 meters in length. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

KOPPENS MACHINEFABRIEK BV FRYER, TYPE BRN 3000/700 Technical features: Machine number: BRN 3000/700-994 Voltage / frequency: 380v, 3 ph, 50hz, 23.09 a, 9.7 kw Weight: 2940 kg Heated by thermal oil Prepared with fire extinguisher system S/s mesh belt, belt width: 700 mm Total dimensions: 6500mm x 1800mm x 2380mm

A complete packaging and palletizing line for buckets is available. 1) Vollenda 2VNES2-6-E bucket filling machine, year of manufacture: 2009, bucket formats: 2kg-5kg, filling capacity 2kg/5kg: 1200/800 buckets/h. 2) Palletizer Ehcolo EPL 160, year of manufacture: 2009, empty pallet magazine positions: 15, max. pallet dimensions X/Y/Z: 800mm/1200mm/1500mm, palletizing capacity 2kg/5kg pails: 800/1200 pails/h. 3) Wrapping machine Robopac Rotoplat 3000HD, year of construction: 2009, max. rotation speed: 12 rpm, max. wrapping height: 2400mm, power: 11kW, weight: approx. 1400kg. Documentation available. On-site inspection is possible.

A ViscoTec volumetric filling machine for filling and dosing low to high viscosity products is available. Filling quantity range: 50ml-20000ml, filling capacity: 25l/min, product contact materials: stainless steel 1.4571, machine dimensions X/Y/Z: approx. 1550mm/550mm/750mm, weight: approx. 200kg. Documentation available. On-site inspection is possible.

Production capacity: 2x120kg, inlet connection (liquid phase): 22mm/RWS22, outlet connection (gas phase): DN50 PN25, optional (unregulated gas phase): RWS28, vent line (safety release): RWS22, separator drain: RWS12, connected load: 40kW, output: 3000kWh. Machine dimensions X/Y/Z: approx. 1900mm/1600mm/400mm. Documentation available. On-site inspection is possible. The machine is unused and still in its original packaging.

Two Rothstein and Plast Service conveyors are available. 1) Inclined conveyor Rothstein RO80 3000x300, year of construction: probably 2005, length: 3000mm, width: 300mm, max. load: 7kg/m, rated power: 0.18kW. 2) Ascending conveyor Plast Service. On-site inspection is possible.

table length: 3000 mm table width: 1500 mm table height: 200 mm weight of the machine ca.: 1,6 t The Professional 750 4-280040.PD 3000x1500x200 mm table has a diagonal hole arrangement on the table top and a parallel hole arrangement in the 50 mm grid on the sides. The holes have a diameter of 28 mm. The table has a material thickness of about 24.5-27 mm and is made of high quality steel S355J2 + N. Grid lines at intervals of 100 mm make it easier for you to set up your device. The welding tables are provided with scale as standard. Including 6x feet basic equipment 650 Article no. 280858.X The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 3000 mm table width: 1500 mm table height: 200 mm weight of the machine ca.: 1,6 t The table Professional Extreme Article no. 4-280040.X7 2400x1200x200 mm has a hole arrangement in the 100 mm grid on the table top and a parallel hole arrangement in the 50 mm grid on the sides. The holes have a diameter of 28 mm and the table has a material thickness of about 24.5-27 mm. The table top is made of hardened tool steel. The low-loaded sidewalls are still made of steel S355J2 + N for cost reasons. Grid lines at intervals of 100 mm make it easier for you to set up your device. The welding tables are provided with scale as standard. Including 6x feet basic equipment 650 Article no. 280858.X The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 3000 mm Working width: 400 mm Wheel width: 400 mm roll diameter: 60 mm number of rolls: 12 Stck. work height max.: 810 - 910 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: 760 mm turning length: 3000 mm swing diameter over bed slide: 520 mm centre height: 380 mm reus: 17 (7,5 - 1015) U/min tail stock: MK6 quill stroke: 225 mm diameter of quill: 105 mm spindle bore: 132 mm feed: längs 0,039 - 18 mm/min feed: quer 0,02 - 9 mm/min total power requirement: 15 kW weight of the machine ca.: 4700 kg dimensions of the machine ca.: 4900 x 1650 x 1650 mm - Coolant device - Machine light - Chip back wall - Spindle protection - Lathe chuck protection - Tool holder protection - Interchangeable gears Special equipment - 3-jaw chuck Ø 250 mm type 3204/ DIN6350, BISON - MULTIFIX quick-change holder type B, including 4 tool holders - 3-axis digital display DRO Newall - Foot pedal with brake function CE The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

A new CNC plasma cutting machine MicroStep including air plasma power source Hypertherm, nesting program and Aigner filter system is available. 1) CNC plasma cutting machine MicroStep MasterCut Compact, year of manufacture: 2023, processing dimensions X/Y: 3000mm/1500mm, machine dimensions X/Y: approx. 4350mm/2650mm, weight: approx. 3100kg, plasma source: Hypertherm Powermax 45 XP, control: MicroStep iMSNC, operating hours: approx. 2588h. 2) Plasma cutting and gouging unit Hypertherm Powermax 45 XP, max. material thickness: 25mm, max. cutting speed: 500mm/min. 3) Aigner filter system, weight: approx. 500kg. Documentation available. On-site inspection is possible. Expected to be available from the end of 2025.

Complete sample system for a water production plant to do 3.000 cycles per hour. Including Blow Molding Machine (with 4-cavity blow molding machine, air compressor, air dryer group, chiller, blow mould), Bottle Feeding Table, Automatic Rinsing/Filling/Capping Machine, Cap Feeding Machine, Lamp Inspection Box, Drying Device, Automatic Label Shrinker Machine, Code Spraying Machine, Automatic Wrapping Machine, Conveyor System. Way of production: Bottle blowing > bottle rinsing > bottle filling > bottle capping > lamp inspection > labelling > thermo shrinking > code spraying > wrapping. - Specifications: 3000 cycles/h (at 500ml) | bottle volume: 350-1500ml | PET bottles | standard 28/30mm PET caps | 1500 liter of water filling /hour | 500 liter of water for rinsing per hour, gravity filliing, 24 bottles in a multipack. - Specification depending on final layout and customized combination of m ...

Auger dosing unit for powder. Dosing by rotating auger. - Specifications: filling range: 5-3000g | filling hopper capacity: 50 liters | hopper with side opening | stainless steel 304 design | power supply: 220~415V | power consumption: 1.4kW. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

Vacuum conveyor with electric vacuum pump. - Specifications: capacity: 3000-4000kg/h (with max. 5m conveying distance) |housing: stainless steel 304 | required compressed air: 0.6 MPa | air consumption: approx. 60L/min | power supply: 220V | power consumption: 7.5kW. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

Mobile fine dust filter, with fan 3000 cbm/h and 20 m2 cartridge filter with jet cleaning, as good as new condition

table length: 3000 mm table width: 2000 mm table load: 200 t total power requirement: kW weight of the machine ca.: 8 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 3000 t chamfer lenght: 14000 mm distance between columns: 10500 mm Control: CYBELECCNC 7000 m. Grafik table width: 1000 mm stroke: 1300 mm min./max.distance between table and ram: 1800 mm controlled axis: Y1, Y2, X1, X2 total power requirement: kW weight of the machine ca.: mind. 465 t dimensions of the machine ca.: 14600 x 4200 x 7200 mm - throat depth: 700 mm - controlled axes: Y1, Y2, X1, X2 - Dimensions (length x width x height): - Foundation depth for table: 3400 mm - Foundation depth for stand: 1700 mm - Dimensions of the individual components for transportation: - Table: 14020 x 4270 x 910 mm, weight approx. 125 tons - Top section: 15240 x 4060 x 910 mm, weight approx. 120 tons - 2 side stands: 7620 x 3550 x 1530 mm, weight approx. 90 tons each - Lower tool: 15240 x 1220 x 1220 mm, weight approx. 40 tons - 2 pcs. Container 40” for cylinder, electrics and various attach ...

turning diameter: 720 mm turning length: 3.000 mm control: FAGOR 8055 TC/B turning diameter over bed: 470 mm spindle bore: 92 mm spindle nose: DIN-55027-11 spindle diameter: 150 mm spindle drive: 17 / 20,5 kW total power requirement: 28 kW weight of the machine ca.: 5,7 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: 1050 mm turning length: 3000 mm control: OSP 300 SA-H travel -x axis: 1080 mm travel -z axis: 3215 mm travel -y axis: -330 +330 mm b-axis: -30 ~210 - 0,001 ° spindle turning speed range: 14 - 1500 U/min spindle hollow: 185 mm power capacity - milling spindle: 37 / 22 / 15 kW Spindle drive motor main spindle: 45 / 37 kW rapid travel x/y/z: 40 / 40 / 30 mm/min C-axis turning speed: 100 U/min max. tool length: 600 mm max. tool diameter: 135 / 300 mm max. tool weight: 30 kg total power requirement: 81,3 kVA weight of the machine ca.: 43 to dimensions of the machine ca.: 9,75x3,55x3,61 m Equipment: - CNC control Okuma OSP P 300 SA-H - NC tailstock - Milling spindle 40 - 10,000 rpm, 37/22/15 kW - Touch setter - Coolant through the spindle - Chip conveyor - Hydraulic steady rest SMW K6.1 (215 - 510 mm) - 3-jaw chuck 15’ approx. 16920h switch-on hours and 9633h automatic ope ...

T-slot Table 3000 x 135 x 430 mm Thickness: 430 mm Length: 3000 mm Large: 1350 mm Weight: 5 ton With (1) -- Without (2) nuts: 7 t-slots

T-slot Table 3000 x 1350 x 430 mm Thickness: 430 mm Length: 3000 mm Large: 1350 mm Weight: 5 ton With (1) -- Without (2) nuts: 7 t-slots

For sale: AXA VSC 1 3000 M Vertical CNC machining center built in 1986 For sale is a vertical CNC machining center of the type AXA VSC 1 3000 M from 1986. The machine is designed for the precise machining of medium-sized to large workpieces and is suitable for both single part production and series production. It is characterised by its robust design, stable travelling column structure and reliable control technology. Specifications Travel X Y Z approx. 1820 mm 450 mm 480 mm Table size approx. 1900 x 450 mm Spindle speed up to approx. 8000 revolutions per minute Machine weight approx. 5500 kg Construction of the travelling column with fixed machine table Cooling Internal Cooling IKZ with Chip Conveyor Condition: used, functional, ready to be demonstrated, energized Particularities Solid machine design ideal for precise roughing and finishing Good access to the worksp ...

Name: AC Servo Motor Manufacturer: FANUC (Japan) Type: Model αM9/3000, A06B-0163-B010#0001 Country: Japan Short description: FANUC model αM9/3000 compact AC servo motor with a rated power of 1.8 kW, 3000 rpm, voltage 161 V, 3-phase, with integrated encoder. Typical black housing body with red junction box. Robust design for industrial CNC machines. Used condition, mechanically in order, with visible signs of wear

Name: AC Servo Motor Manufacturer: FANUC (Japan) Type: Model αM6/3000, A06B-0162-B110#0001 Country: Japan Short description: FANUC model αM6/3000 compact AC servo motor with a nominal power of 1.4 kW, 3000 rpm, voltage 144 V, 3-phase, with integrated encoder. Typical black housing body with red junction box. Robust design for industrial CNC machines. Used condition, mechanically in order, with visible signs of wear. Price excludes VAT.

Control Okuma OSP-P300 SA Rotary diameter. [mm] 650 Turning length [mm] 1000 Main spindle: Motor spindle technology Speed 4,200 rpm Power 22 kW Torque 427 Nm Spindle bore 91 mm Hollow clamping cylinder 86 mm C-Axis High Accuracy Package Chuck SMW KNCS-N 275-86 K8 Sub-spindle: Motor spindle technology Speed 5,000 rpm Power 22 kW Torque 420 Nm Spindle bore 80 mm Hollow clamping cylinder 77 mm C-Axis High Accuracy Package Chuck SMW BHD-FC 210-52-3 Tool carrier X/Y/Z/B: Milling spindle technology Speed 12,000 rpm Power 22 kW Torque 120 Nm Tool holder HSK 63 Y-axis 250 mm (+/- 125 mm) B-axis 240° Tool magazine: Number of stations 80 Equipment / Accessories: Displacement measuring systems directly in X/Y/Z axis (glass scales) Chip disposal chip conveyor Coolant supply IKZ system, 70 bar Coolant temperature control Deltatherm E4 Chip flushing work area ...

Technical data for the shelf: Shelving system: SSI Schaefer Type: R 3000 The scope of delivery includes: Shelves, used Material colour: sendzimir galvanised Total width: approx. 1,295 mm Total depth: approx. 790 mm f. Stand depth: approx. 800 mm Height: approx. 40 mm Number of beams: 02 pieces Weight / piece: approx. 12.82 kg Currently available in stock: 1338 pcs. Your contact persons in our company: Mr.: Andre Evering Sir: Mario Klöver Mr.: Falk German General information about the article: This item is only available for pickup. An additional desired transport or a shipment of this item is associated with additional costs, which will be charged separately depending on the delivery location or scope of delivery.

Transnorm belt conveyor hinged belt diverter 3000x1120x1000 RA2286 Technical data: Conveyor length (NL): 3000 mm Belt body (NB): 1120 mm Belt width (GuB): 1000 mm Overall height/transfer height (BH): 1050 mm +100 mm adjustment range Minimum transfer height: 500 mm Maximum transfer height: 1600 mm Basic dimensions: 3000x1300 mm Tilt height difference: 1100 mm Conveying speed (v m/s): 1.5 m/s Lifting/lowering speed: 1.8 s /1.2 s Drive: Nord geared motor Electrical data: Conveyor belt motor: 50Hz V380-500, kW 1.5 / S1 Tilting motor: 50Hz V220/400, kW 3.0 / S1 Idler pulley (UR): Ø = 80/120 mm Drive drum (AT): Ø = 82 mm Year of construction: 2020 Optionally available: Frequency converter for stepless speed control Prices net plus ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg Features: Construction year: 2020 condition: new Conveying length in mm: 3000 Nominal / outside w ...

Key data: 3000 mm, 1000 mm, 1245 mm

Pair of cast iron angle plates Height: 3000 mm Width: 1000 mm Depth: 1245 mm Weight: 3 T / unit

Haeusler VRM-HY-N - 3000 x 20 mm CNC Number of rolls: 4 Roll capacity cold: 3000 x 20 mm Pre-bending : Yes

: 2000 mm Working width: 400 mm Wheel width: 400 mm roll diameter: mm : kg height adjustment: 750 - 1100 mm weight of the machine ca.: 0,80 t dimensions: 2,0 x 0,55 x 1,0 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Reversible prism, 1-piece die block for die bending machineBending tool for press brakeReversible prism with 6 different prismsPrism size 30 mm with 3 mm radius for 90, 40 mm with 4.5 mm radius for 90 50 mm with 4 mm radius for 90, 18 mm for 90, 10 mm for 90 12 mm for 45Dimension 90 x 88 mmPrism length 3000 mmWeight 147 kgGood condition; used

turning diameter: 720 mm turning length: 3000 mm centre height: 360 mm spindle bore: 106 mm turning speed range: 1 - 1800 U/min tailstock quill taper MT: 6 workpiece weight max.: 3800 kg total power requirement: 36 kW weight of the machine ca.: 6100 kg dimensions of the machine ca.: 4800 x 2450 x 2000 mm CNC lathe - cycle controlled The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.