kw used for sale

Twist drill grinding machine make WERKÖ type SWB 4Machine -No: 702 built in 1988Max. Grinding range: 0.3 - 4 mmMax. Drill length: 90 mm4 point angles: 90/118/130/140 °Bevel angle: 0 - 27 °Connected load: 0.25 kWPower connection: 380 V / 50 HzExternal dimensions: 420 x 550 x 450 mmWeight approx: 35 kgused, in very good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

4-way comb. Section steel shears make PEDDINGHAUS type Peddimaster 28/40 HMachine -No: 4421050787006Technical specifications:FLAT STEEL SHEARSFlat steel with little deformation up to: 300 x 10 mmor: 250 x 10 mmor: 200 x 11 mmor: 75 x 15 mmKnife cutting length: 300 mmWorking height: 830 mmPROFILE STEEL SHEARSShear cross section max .: 1300 mm²Infinitely adjustable stroke: 10 - 26 mmL-steel 90 ° cut up to: 80 x 8 mmL-steel 45 ° cut up to: 50 x 6 mmRound steel: 29 mmSquare steel: 25 mmWorking height: 1088 mmNOTCHERSquare notcher sheets up to: 8.0 mmL-steel up to: 60 x 6 mmU-steel in the flange: 50 x 25/60/65 mmI-steel in the flange: 80/100 mmNotch width / notch depth: 42/55 mmHOLE PUNCHPunching force: 280 kNInfinitely adjustable stroke: 10 - 26 mmholes with punching table: 27 in 8 mmU-steel in the flange: 65 - 200 mmU-steel / I-steel in the web: 80 - 260 mmPunch projection: 305 mmWorking ...

Twist drill grinding machine make SCHANBACHER type S 3-50Machine -No: 80 1018Technical specifications:Grinding range: 3 - 50 mmPoint angle: 90 - 140 °adjustable clearance angle and relief grindingGrinding wheel dimensions: 175 x 32 x 20 mmGrinding wheel drive: 380 V, 0.25 kWGear motor for swivel movement in the machine framebuilt-in: 0.12 kWDimensions approx .: 600 x 850 x 1200 mmWeight approx: 120 kgused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Twist drill grinding machine make WERKÖ type SWB 4Machine -No: 327 built in 1978Technical specifications:Max. grinding range: 0.3 - 4 mmMax Drill Length: 90mm4 point angles: 90/118/130/140°Relief angle: 0 - 27°Connection value: 0.25 kWPower connection: 380 V / 50 HzExternal dimensions: 420 x 550 x 450 mmWeight approx.: 35 kgusedPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

4-fold combined profile steel shears make PEDDINGHAUS type Peddimaster 80/110, built in 1993Technical specifications:FLAT STEEL SHEARS:500 x 18 mm:400x19mm:300x22mm:200x25mmKnife length: 510 mmPROFESSIONAL STEEL SHEARSAngle steel 90°: 120 x 13 mm:150x100x12mmAngle steel 45°: 100 x 10 mmRound bar: 45 mmSquare steel: 40 mmSQUARE NOTCHSheets up to: 13 mmLatch width: 65 mmNotch depth: 85 mmHOLE PUNCHPunching force: 80 tProjection: 510 mmStroke continuously adjustable: 10 - 30 mmHoles: 30 in 20 mm:27 in 20mmGENERAL MACHINE DATANumber of strokes: 22 / 16 h/minOil filling: 80 lDrive power: 7.5 kWWeight approx.: 2450 kgExternal dimensions approx.: 1990 x 850 x 1890 mmwith- stop table- 2 footswitches- Rectangular notcher- large lot of punches and matricesused, in very good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment. ...

Groove milling machine make BUSCH type NF 1Machine -No: 1/494 built in 1963Projection: 200 mmSpindle length: 250 mmTable size: 250 x 610 mm4 spindle speeds: 380-1500 rpm.Drive power: 9.8 kWExternal dimensions: 1050 x 900 x 1800 mmused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

5-fold combined profile steel shears with notching device and hole punchMake MUBEA type HIW 550/510Machine -No: HIW550/510/94 built in 1999Technical specifications:Flat steel scissors: 350 x 13 mmAngle steel shears L-steel 90°: 140 x 13 mmL-steel 45°: 70 x 7 mmSteel bar shears round/ square: 45 / 42 mmNotch: 10 mmPunching force: 55 tProjection: 510 mmpunches: 30 in 16 mmInfinitely variable punch stroke: 0 - 60 mmNumber of strokes of the punch at 20 mm path: 42 strokes / minDrive power: 5.5 kWWeight approx.: 1600 kgused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Horizontal slotting machine manufactured by HENNING type S 302Masch. -No: 13663 built in 1996Technical specifications:Max. Groove width: 16 mmStroke length: 220 mmDrive power: 1.1 kWPower connection: 380 V / 50 HzExternal dimensions approx: 1100 x 500 x 1200 mmused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Hydraulic punching machine make PEDDINGHAUS type hydraulics 1000 NMachine -No: 4206879484010, year of construction 1984Printing capacity: 100 tStroke infinitely adjustable: 10 - 100 mmStrokes per minute: 80 - 34Projection: 510 mmWorking height: 1074 mmInstallation height: 440 mmpunched: 39 in 20 mmor with optional equipment: 65 in 12 mm: 90 in 8.5 mm: 130 in 6.0 mmOil filling: 150 lRated power: 15 kWWeight approx: 4,4 tExternal dimensions approx L x W x H: 1954 x 1000 x 2250 mmWith- Coordinate template table for workpiecesxa0xa0 up to 500 x 1000 mm- Swivel bracket- Ball support table- a lot of accessoriesused, from an operational resolution, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for ...

Vertical shaping machine manufactured by RAVENSBURG type S 200Technical specifications:Large stroke of the ram: 200 mmRam adjustment: 200 mmRound table diameter: 440 mmThroat: 410 mmGroove width max: 32 mmHeight between table and ram guide: 370/470 mmLongitudinal table displacement: 375 mmCross table displacement: 350 mm4 lifting speeds: 33/49/75/110 H / min6 feeds, lengthways per slide stroke: 0.03 - 0.3 mmacross per ram stroke: 0.07 - 0.7 mmround per ram stroke at 100 mm diameter: 0.05 - 0.5 mmDrive power: 3.0 kWDimensions approx: 1000 x 1600 x 2200 mmWeight: 2000 kgWith- Round dividing tableused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Ma ...

Hydraulic punching machine make PEDDINGHAUS type Hydraulik 1000Masch. -No: 4207873785003, year of construction 1985Printing power: 1000 KNStroke infinitely adjustable: 10 - 100 mmNumber of strokes: 34 - 80 1 / minDischarge: 760 mmInstallation height: 500 mmDrive power: 380 V / 15 kWpunches e.g. up to: 31 mm Ø in steel: 25 mmwith special punch saddle e.g. up to: 58 mm Ø in steel: 13 mmxa0xa0xa0xa0xa0xa0xa0xa0xa0xa0xa0xa0xa0xa0xa0xa0xa0xa0xa0xa0xa0xa0xa 0xa0xa0xa0xa0xa0xa0xa0xa0xa0xa0xa0xa0 e.g. up to: 90 mm Ø in steel: 8.5 mmWeight approx: 3600 kgOutside dimensions approx. W x H x D: 1200 x 2450 x 1900 mmused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. W ...

Vertical slotting machine make WMW Meuselwitz type StS 400Serial no. 4178.20.61, built in 1961Technical specifications:Stroke: 400 mmRound table diameter: 850 mm6 ram strokes: 18 - 56 / minCutting speed: 2 - 70 m / minFeed per cut: 0.14 - 1.4 mmConnected load: 9 kWExternal dimensions L x W x H: 2800 x 2000 x 3300 mmWeight: 6200 kgwith- swivel headused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Grooving machine make RAUSCH type RS 1/800Year of construction 1964Clearing power: 1.0 tStroke: 800 mmMax. Groove width: 20 mmMax. Tool length: 1000 mmClearing speed: 3.0 m / min.Return speed: 6.0 m / minTable size: 320 x 220 mmDrive power: 1.5 / 3.0 kWWeight: 340 kgExternal dimensions approx: 700 x 600 x 1500 mmWith- several guide sleevesused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Vertical broaching machine make RAUSCH type RS 3/1000Fabr. -No: 3289536, year of construction 1980Traction: 3 tStroke: 1000 mmMax. Groove width: 20 mmMax. Tool length: 1200 mmClearing speed: 3 m / minReturn speed: 6 m / minDrive power: 1.7 kWDimensions L x W x H: 540 x 720 x 1460 mmWeight approx: 250 kgWith- several guide sleeves- 1 set of broaches 4/6/8/10/12/14 mmused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Grooving machine Fabr. RAUSCH Type SR 10 PFabr. -No: 599 built in 1958Traction: 10 tStroke length: 1000 mmTable surface: 500 x 400 mmTable passage: 200 mmTool length: 1200 mmMachine table height: 1500 mmDrive power: 4 kWStand area: 1400 x 800 mmusedPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Hydr. 4-fold combined profile steel shears make MUBEA type KLSH 550Make -No: 0155682757250Technical specifications:Capacity of the flat steel shears: 200 x 20 / 400 x 16mmCutting length: 400 mmPerformance of the profile steel shears:L-steel: 120 x 13 mmor: 130 x 90 x 12 mmRound bar: 35 mmSquare steel: 32 mmU steel: U 160Hole punch performancePressure capacity: 50 tStroke:50mmpunches :30 in 15 / 28 in 16 mmProjection: 320 mmPerformance of the release devicetriangle notcher:L + T - iron: 75 x 8Notch depth: 80mmLatch width: 40 mmGeneral data of the machineDrive power: 7.5 kWDimensions L x W x H: 1160 x 550 x 1840 mmWeight approx.: 1.1 tused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for yo ...

Groove broaching machine make HENNING type RW 1000Fabr. -No: 20020, built in 1982Technical specifications:max.groove width: 10 mmmax.drawing length: 1000 mmDrive power: 0.75 / 1.1 kWDimensions approx .: 1600 x 430 x 1000 mmused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Copy and coordinate nibbling machine make TRUMPF type CN 701Machine -No: 1118Technical specifications:Horizontal projection: 1550 mmWorking area: 1250 x 1300 mm: 1250 x 2000 mmSmallest section of a circle for copy nibbling: 12 mmsmallest circular diameter with internal circular guidewhen shearing: 56 mmsmallest circular diameter with internal circular guidewhen nibbling: 65 mmstepless stroke rates: 350-1400 H / minWorking height: 1020 mmDrive power: 2.2 kWExternal dimensions approx .: 2900 x 950 x 2130 mmWeight approx: 2125 kgWith- lots of accessoriesused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Universal punch make EDEL type VM 40/350Machine -No: 24735456 Year of construction 1976Punching force: 40 tProjection: 350 mmStrokes per minute: 60Punches: 24 in 12or: 50 in 6Klinkleistung: 100 x 100 in 5 mmDrive power: 2.2 kWWeight approx: 1100 kgOutside dimensions approx: 780 x 1300 x 1750 mmWith- Rectangle - Notecards (currently furnished)- Tool carrier for punching out punch 68 mm- many punching tools- Footswitchused, despite the year of construction in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Steel bar shear Fabr. MUBEA-Matic type KFMAV 1300Machine -No: 42982L-profile: 30 x 3 to 180 x 18 mmU-profile: 40 x 4 to 220 mmI-profile: 80 - 220 mmI-PE: 80 - 220 mmFlat iron: 5 x 230 to 180 x 30 mmRound profile: 80 mmSquare profile: 70 mmConnected load: 11 kWExternal dimensions: 2200 x 1000 x 2500 mmused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Bendless automatic lathe make INDEX type E 60Fabr. -No: E 6072107 Year 1972largest material passage: 60 mmChuck diameter: 136 mmmax. thread diameter: M 30 / M 24Speed range: 134 - 2420 rpm.Working distance: 80 mmRapid traverse path: 50/62 mmlargest longitudinal path: 80 mmDistance quill to collet: 60 - 230 mmFeed infinitely variable: 5 - 3400 mm / minDrive power: 5.5 kWDimensions L x W x H: 1510 x 850 x 1500 mmWeight approx. 2000 kgWith- bar feed- various change wheels- hydr. Power Chucks- long turning device- Copy machine Fabr. SauterusedPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

CNC laser cutting machine make AMADA type LC 2415 A3Year of construction 2004Technical specifications:Medium format: 2500 x 1250 mmLaser power: 4.0 kWConnected load: 65 kVAWeight approx .: 6.7 tOperating hours: 35000Turbo booster changed in 2017used, in very good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Single spindle lathe make INDEX type ER 25Mash. -No: 25751408max. workpiece passage Drm.:25 mmxa0xa0xa06-edge: 21 mmxa0xa0xa0Square: 16 mmmax. workpiece feed p. Circuit: 70 mmmax. thread diameter: M 16 / M 14Speed range: 14 - 5750 rpm.Number of automatically switchable speeds: 4Number of overdrive speeds: 26Number of slow speeds: 234Turret diameter: 120 mmTool holder cone: 3/4 Turret processing: 60 mmDistance collet - Turret: 60 - 150 mmFeed rate infinitely variable: 16 - 2800 mmFeed rate continuously variable: 40 - 7000 mm / minRapid forward / backward: 10/25 m / minSwitching time: 0.75 sCross slide travel: 44 mmLongitudinal adjustment of the upper slide: 20 mmContinuous feed of the cross slide: 5 - 1000 mm / minDriving power: 4 kWDimensions L x W x H: 1900 x 1020 x 1650 mmWeight approx: 1650 kgWith- 8-fold revolver- 2 vertical parting carriages- 2 horizontal cut-off slidesused, in very ...

CNC punching and nibbling machine make TRUMPF type Trumatic 180 WFabr. -No: 202008, built in 1980Punching force: 205 kNCutting force: 180 kNWorking size 1000 x 2000 mm (with repositioning 3000 mm)Stroke length: 15 mmNumber of strokes in continuous operation: 280Max. Sheet thickness: 6 mmPower consumption: 5.5 kWMax. Positioning speed: 45 m / min paraxial60 m / min simultaneouslyNibbling speed: 5.5 m / minFeed per stroke: 20 mm at 280 rpmwith the ram running: 5 mm at 420 rpmAccuracy sma. programmable distance: 0.01 mmxa0xa0xa0xa0xa0xa0xa0xa0xa0xa0xa0xa0xa0xa0xa0xa0xa0xa0xa0Entry tolerance: + - 0.1 mmxa0xa0xa0xa0xa0xa0xa0xa0xa0xa0xa0xa0xa0xa0xa0xa0xa0xa0Positioning width: + - 0.03 mmElectric connection: 20 kVAWeight of the machine (without accessories): 8 tWith- CNC control TRUMPF micro 5 TC- automat. Tool changer Type 9053H1 No. 355- separate control panel- separate control cabinetused, i ...

Single-spindle automatic turret make TRAUB type TK 30Machine -No: 159 built in 1979Clamping diameter DIN 6343 up to: 30 mm11 spindle speeds: 400 - 4000 rpm.Crosswise support front / rear: 43/43 mmDrive power: 4.5 / 6.3 kWWeight approx: 1800 kgOutside dimensions approx: 1800 x 900 x 1600 mmWith- Cross support- Copying device- star turretused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Program controlled lathe type TRAUB type TF 60/140Machine -No: 194 Year 1976Max. Bar passage: 60 mmMax. Chuck: 120 mmMax. Clamping diameter: 130 mmSwinging diameter: 190 mm21 spindle speeds: 21 - 2000 rpm.switchable speeds: 4 right 2 leftSled trails: 125 mm along: 70 mm acrossinstalled power: 14 kWWith- Copying device- sweeping device- hydr. tensioning device- bar feed- 2 vertical slides- 2 horizontal slides- collet set- Three-jaw lathe chuckused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

CNC lathe fabr. SCHERER-FEINBAU type SNC 80Machine -No: 8079 Year 1995Distance between centers: 350 mmCircumference diameter over bed: 320 mmCircumference diameter over support: 160 mmPath Z + X: 250 mmSpindle mount: DIN 55021 / A 3Speed range up to: 6000 rpm.Feed infinitely variable: 0.1 - 10000 mm / min.Rapid traverse: 10 m / min.Quill stroke: 125 mmDrive power: 7.0 kWWeight approx: 2.0 tOutside dimensions approx: 2100 x 1500 x 1900 mmWith- Siemens control 810 T- power chuck- Linear turret with 4 tool holders- Cooling deviceused, in very good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Cycle controlled lathe make METOSA type UD 260 CH x 1500Machine -No: 42194 built in 2001Center height: 260 mmTip width: 1500 mmCircumferential diameter: 475 mmCircumference diameter over bed: 530 mmCircumferential diameter over cross slide: 315 mmBed width: 350 mmSpindle bore: 80 mmSpindle mount: DIN 55027/8Discharge range: 0 - 2500 rpm.Feed range: 0 - 7000 rpm.Rapid traverse area: 10 m / min.Drive power: 15 kWWeight approx: 3.1 tOutside dimensions approx: 4120 x 1600 x 1800 mmWith- Three-jaw lathe chuck- Quick change tool holder with several inserts- CNC control FAGOR 8055/55 / TCLocation Staufenberg, little usedPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machi ...

Cycle controlled lathe make WEMAS type HITURN 320Machine -No: 24 built in 1999Turning diameter over bed 320 mmTurning diameter over cross support 150 mmTip width 800 mmSpindle bore 50 mmCone in the spindle - metric 60Motor power at 1500 rpm 7.0 kWSpindle speed rangeControl system Heidenhain 1st row 0 - 1000 rpm. 2nd Row 20 - 4000 rpm.X-axis diameter of the lead screw 20 mmLeadscrew pitch 5 mmMax. Stroke 190 mmRapid feed 7500 mm / minMax. Feed force 3000 NAccuracy of repeated position adjustment 0.008 mmY-axis diameter of lead screw 25 mmLeadscrew pitch 5 mmMax. Stroke of the support carriage : 750 mmRapid feed : 8000 mm / minMax. Feed force 5000 NAccuracy of repeated position adjustment 0.008 mmTool head Multifix Bmax diameter of the steel 25 x 25 mmtailstockPinhole diameter 65 mmQuill stroke 125 mmCone of the quill Morse 4Dimensions 2160 x 1594 x 1875 mmWeight approx 2150 kgWith- HEIDEN ...

CNC lathe make VDF BOEHRINGER type VDF 315 C-UFabr. -No: 1117.7007-26 built in 1989Technical specifications:max. swing diameter: 550/520 mmmax.working lengthways: 450 mmMax.processing lengthways on the drum turret: 280 mmTurning length: 2000 mmSupport path Z: 2227 mmSupport path X: 435 mmSpindle bore: 78/103 mmSpindle mount: DIN 55022/8Infinitely variable speed range: 16 - 2500 rpm.max.torque of the main spindle: 1600/2240 NmFeed speed: 0.1 - 10000 mm / min.Rapid feed: 10 m / min.Feed force: 15 kNNumber of tool stations: 12Switching time: 1 / 1.8 sec.Hydraulic pressure: 60 barDrive power: 43 kWDimensions without chip conveyor approx: 6000 x 2400 x 2400 mmWeight approx: 14.2 twith- three-jaw chuck 400 mm dia.- Drum turret 12 stations of which 6 with driven tools speed 60 - 2500 rpm.- CNC control Siemens Sinumerik 880 T- many tool holders- chip conveyor- Forkhardt power chucksusedPrice on ...

CNC lathe make MONFORTS type DNC 5Year 1995 with C-axis and driven tool stationsCircumference diameter: 560 mmNumber of revolvers: 2Travel distance Z1 / Z 600/600 mmTravel X1 / X 260/260 mmMax. Spindle distance: 1460 mmSpindle passage: 85 mmSpindle flange: A8 / A8feed drivesRapid traverse Z1 / Z 15/15 m / minRapid traverse X1 / X 12/12 m / minFeed force Z1 / Z 11900/11900 NFeed force X1 / X 6600/6600 NNumber of revolvers: 2Number of tools per turret: 12Straight shank: 40 mmTurning tool shank: 25 x 25 mmSpeed range: 5 - 4000 rpm.Drive power: 18/24 kWWith:- CNC control SIEMENS 840 C- C axis- 2 tool turrets with driven tool stations- without driven tools- 2 opposite spindles- 1 set of tool holders- Chip conveyorSingle-layered run!usedPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors except ...

CNC Lathe Fabr. VDF BÖHRINGER Type 180 CmYear of construction 1996Turning length: 500 mmMax. Circulation diameter: 330 mmMax. Turning diameter: 250 mmSpindle bore: 78 mmSpeed range: 50 - 4500 rpm.Spindle mount: DIN 55026/6Max. Torque: 800 NmFeed rate: - 10000 mm / minRapid traverse speed: 15 m / minDrilling force: 10 kNDrive power: 53 kWWith- CNC control SINUMERIK 840 C- Drum revolver with 12 tool holders- 6 positions with driven tool positions- 4 powered tools- many tool holders 40 mm- Bar feeder SIEMCA MO 4.6 / 4musedPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

CNC lathes make SPINNER type TC 65 CMachine -No: 050023 built in 1996Technical specifications:Distance between centers :600 mmSwing diameter over bed: 400mmMax. turning diameter: 310 mmAdjustment path X-axis: 200 mmAdjustment path Z-axis: 500 mmAdjustment path Q-axis: 500 mmC-axis adjustment range:360°max. rapid traverse: 20 m/min.Feed: 0 - 15 m/min.Main spindle passage: 65 mmMax. spindle speed: 4000 rpm.Counter spindle passage: 26 mmMax. spindle speed: 6000 rpm.Quill diameter: 80 mmQuill stroke: 100 mmNumber of turret stations: 16-foldMain spindle motor: 14 kWTotal connection value: 20 kWWeight approx.: 4500 kgDimensions approx.: 1700 x 2200 x 1700 mmwith- Control Siemens 820 T- 16-fold revolver- counter spindle- C axis- 8 powered tools- Parts catcherused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment. ...

Mechanic Lathe Fabr. WEILER Type MDU WMachine -No: 12401 Year 1971Center height: 125 mmMax. Circumference diameter over bed: 260 mmMax. Circumferential diameter over slide: 140 mmMax. Tip width: 500 mmSpindle bore: 28 mmSpindle speeds: 160-1800 rpm.Drive power: 1.1-1.2 kWWeight: 400 kgOutside dimensions: 1300 x 600 x 1200 mmWith- Cranksupport- Collet device with draw tube and colletsused, from operational resolutionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Short Bed Mechanic Lathe Fabr. PRÄWEMACenter height: 125 mmdistance between centres: 300 mmBed length: 550 mmBed width: 140 mm8 spindle speeds: 180 - 2000 rpm.Spindle bore: 25 mmDrive power: 2.2 kWWith- Four-jaw lathe chuck 160 mm- Quick change tool holder with several insertsused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Table universal lathe make Fabr. SEE type RAPIDMachine -No: 3264Center height: 125 mmSpindle bore: 36 mmSpindle cone: MK 5infinitely variable spindle speeds: 465 - 4200 rpmTable mounting surface: 300 x 265 mmSupport longitudinal path: 100 mmSupport cross travel: 125 mmDrive power: 0.37 kWPower connection: 380 V / 50 HzDimensions (H x W x D): 850 x 500 x 1250 mmWeight approx:200 kgWith- Underframe- Three-jaw chuck 125 mmused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Multi-turn lathe make HAHN & KOLB type TORNOMAT 2Masch. -No: 668273 Year 1973Working area hexagonal: 3 - 36 mmWorking area 4-edge: 3 - 24 mmhydr. Feed per revolution: 0 - 0.5 mmRapid traverse: 3.7 m / min.Switching time: 1.0 sec.Speed of the rotor: 250/355/450 rpm.Speed of the spindle: 2250/3200/4050 rpm.Drive power: 2.2 / 1.5 kWWeight approx: 1.25 tOutside dimensions approx: 670 x 1530 x 1220 mmWith- Electric control cabinet- Accessories and tool cabinet complete with content- Cabinet with collets- conveyor beltused, in very good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Prec. Revolving Lathe (Post-Lathe) make WEILER type RDU 38Masch. -No: 2371/1287 built in 1973Center height: 125 mmMax. Circumference diameter over bed: 260 mmMax. Circumferential diameter over cut-off carriage: 125 mmTop width: 380 mmSpindle passage: 38 mmSpindle mount: DIN 800 A12 spindle speeds: 125-2800 rpm.Drive power: 0.9 kWDimensions L x W x H: 1300 x 600 x 1200 mmWeight approx: 400 kgWith- Collet device- Parting support- 6-fold revolver tailstock- additionally flanged collet chuck Nannxa0xa0 with 16 collets up to 35 mm diameterused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Mechanic lathe made by FEINBAU type PM 1 FMasch. -No: 1437 Year of construction 1960Technical specifications:Spindle passage: 23 mmTip height: 110 mmDistance between centers: 160 mmlargest swing diameter over bed: 220 mmlargest swing diameter over cross support: 110 mm3 spindle speeds: 700/1400/2800 rpm.Drive power: 0.22 / 0.3 / 0.5 kWWeight approx: 75 kgWith- Lever support- Lever tailstockused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Mechanic lathe make WEILER type Primus MD / GMachine -No: 2728-1Technical specifications:Distance between centers: 430 mmCenter height: 120 mmTurning diameter over bed: 195 mmTurning diameter over cross slide: 135 mmCircumferential diameter over bed: 250 mmBed width: 155 mm18 spindle speeds: 60 - 3000 rpm.Spindle bore: 23 mmDrive power: 1.2 / 1.5 kWDimensions: 1200 x 650 x 1330 mmWeight: 340 kgwith- three-jaw chuck- Multifix steel holderused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Mechanic lathe make WEILER type Primus MD / GMachine -No: 2729-1Technical specifications:Distance between centers: 430 mmCenter height: 120 mmTurning diameter over bed: 195 mmTurning diameter over cross slide: 135 mmCircumferential diameter over bed: 250 mmBed width: 155 mm18 spindle speeds: 60 - 3000 rpm.Spindle bore: 23 mmDrive power: 1.2 / 1.5 kWDimensions: 1200 x 650 x 1330 mmWeight: 340 kgwith- three-jaw chuck- Multifix steel holderused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Post turning machine make FEINBAU type PM 1-HUBFabr. -No: 3473Tip width: 165 mmTop height: 110 mmgr. circulation diameter over bed: 220 mmover cross slide: 110 mmSpindle bore: 23 mm3 spindle speeds by directly on theSpindle drive motor: 690/1380/2850 rpm.Drive motor 380 V,: 690/1380/2850 rpm.: 0.22 / 0.37 / 0.5 kWSpace required: 400 x 830 x 1170 mmWeight: 160 kgused, from a service release, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Pipe and flange lathe make WISCH type RA 8-36Mash. -No: 9-3430light construction site machineTurning diameter: 80 - 400 mmClamping diameter: 80 - 365 mmminute Clamping length: 190 mmTool speeds: 11.3 / 22.6 rpm.Radial feed: by hand / by camMax. Travel: 95 mmFeed rates: 0.166 / 0.33 mm / rev.Axial feed: by handMax. Travel: 55 mmMax. Turning length for external turning work: 40 mmMax. Turning length for internal turning: 30 mmDrive power: 0.8 / 1.2 kWSupply voltage: 380 V / 50 HzDimensions approx L x W: 775 x 760 mmHeight above center (without carrying hook): 210 mmHeight below center: 320 mmTotal height: 530 mmWeight approx: 74 kgused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your q ...

Metal Lathe make COLCHESTER Type Master 2500 / 165x1000Fabr. -No: MCH No 5/0009/07505, year of construction 1979Tip width: 1000 mmTop height: 165 mmTurning diameter over bed: 335 mmTurning diameter over cross slide: 210 mmSpindle bore: 40 mm16 spindle speeds: 30 - 2500 rpm.39 metric thread pitches: 0.2 - 14 mm45 Whiteworth thread pitches: 2 - 72 tip18 module thread pitches: 0.3 - 3.521 diametrical pitch thread pitches: 0 - 44 DPLongitudinal feeds: 0.03 - 1.0 mmFeed rates: 0.015 - 0.5 mmDrive power: 3.7 kWExternal dimensions: 1985 x 890 x 1195 mmWeight approx: 890 kgWith- 3- jaw chuck diameter 200 mmused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWA ...

Metal Lathe Fabr. WEILER Type Condor VSMasch. -No: 9127 built in 1979 with preselectionCenter height: 155 mmTip width: 800 mmGr. circulation diameter over bed: 320 mmxa0xa0xa0 via support slide: 170 mmSpindle bore: 38 mmMounting taper of the tailstock quill: MK 317 spindle speeds: 12 - 2800 rpm.60 feeds along: 0,037 - 1,253 mmxa0xa0xa0 plan: 1/2 of the longitudinal feeds35 metric thread pitches: 0.35 - 12 mm40 inch thread: 45 - 2 Gg / 25 module thread: 0.2 - 4 module32 diametrical pitch threads: 5 - 90 DPDrive motor: 380 V, approx. 3 kWDimensions L x W x H: 700 x 1830 x 1260 mmWeight approx: 815 kgWith- compl. electrical device- Lighting- Coolant device- Quick change tool holder Multifix m. morexa0xa0 steel holders- Three - jaw chuck Forkhardt 200 mm Drm.- Tool cabinet with contentused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net a ...

Table Universal Nachdrehmaschine Make SEE type RAPIDCenter height: 125 mmSpindle bore: 36 mmSpindle cone: MK 5infinitely variable spindle speeds: 465 - 4200 rpmTable mounting surface: 300 x 265 mmSupport longitudinal path: 100 mmSupport cross travel: 125 mmDrive power: 0.37 kWPower connection: 380 V / 50 HzWeight approx: 100 kgDimensions approx: 850 x 400 x 350 mmWith- without base- Three-jaw chuck 125 mm- 4-fold steel holderused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Table Universal after Lathe Fabr. SEE Type RAPIDCenter height: 125 mmSpindle bore: 36 mmSpindle cone: MK 5infinitely variable spindle speeds: 465 - 4200 rpmTable mounting surface: 300 x 265 mmSupport longitudinal path: 100 mmSupport cross travel: 125 mmDrive power: 0.37 kWPower connection: 380 V / 50 HzWeight approx: 100 kgDimensions approx: 850 x 400 x 350 mmWith- without base- Three-jaw chuck 125 mm- clamping clawused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Metal Lathe Make COLCHESTER Type Master 2500Fabr. -No: MCH No 5/0007/05812, built in 1977Tip width: 635 mmTop height: 165 mmTurning diameter over bed: 335 mmTurning diameter over cross slide: 210 mmSpindle hole: 40 mm16 spindle speeds: 30 - 2500 rpm.39 metric pitches: 0.2 - 14 mm45 Whiteworth thread pitches: 2 - 72 tip18 module thread pitches: 0.3 - 3.521 diametral pitch thread pitches: 0 - 44 DPLongitudinal feeds: 0.03 - 1.0 mmFlat feeds: 0.015 - 0.5 mmDrive power: 3.7 kWExternal dimensions: 1985 x 890 x 1195 mmWeight approx: 855 kgused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Metal turning machine make LIEBER type SS / VO / EVYear of construction 1974 with movable upper bed and electrical preselection controlTechnical specifications:Center height: 500 mmTip width: 2500 mmTurning diameter over bed: 1000 mmTurning diameter over cross slide: 750 mmSwing diameter in the crank: 1650 mmCamber length infinitely adjustable: 0 - 1500 mmSpindle bore: 101 mm12 spindle speeds: 6 - 600 rpm.Bed width: 640 mmBed slide guide length: 1020 mmSlide gate width: 350 mmUpper support width: 250 mmUpper support path: 250 mm132 longitudinal feeds: 0,051 - 4,876 mm / min.132 flat feeds: 0.027 - 2.688 mm / min.Gewindevorschübe: 66metric threads: 0,785 - 24 mmWW thread: 1.5 - 46 Gg / 1 Tailstock: MK 6Motor power: 15 kWExternal machine approx: 5000 x 2200 x 2300 mmWith- sliding bed- electrical preselection control- Faceplate Drm. 1600 mm- Leadscrew is missingusedPrice on request.Deliver ...

Metal lathe make MYFORD type Super 7Technical specifications:Distance between centers: 330 mmTip height: 84 mmBed width: 76 mmSpindle bore: 15.5 mmTurning diameter over support: 98 mmInfeed per division: 0.02 mm12 spindle speeds: 25 - 2150 mmThread pitches metric: 0.2 - 3.5 mmThread pitches inch: 8 - 28 Gg / 1 Feeds: 0.1 - 0.25 mm / rev.Fine feeds: 0.009 - 0.004 mmDrive power: 0.9 / 0.52 kWWeight approx: 53 kgExternal dimensions approx: 910 x 660 x 400 mmWith- Four-jaw lathe chuck- Set of change gears- steel holder- drill chuck- mitl. Center point- Tapered roller bearings in the main spindleused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machi ...