24432 offers

maximum number of results exceeded > 1000
please refine your search

Category: 103: milling machines
New in: 1977
Price: request quote
Location: Land-de DE 64720 Michelstadt
Seller: Alfred Feldmann Werkzeugmaschinen

X: 1390 mm Y: 729 mm Z: 670 mm Table size: 700 x 2000 mm Speed range: 31.5 to 1600 rpm Spindle retainer: SK 50 Quill stroke: 200 mm Control: Heidenhein TNC 355 Total power: 20 kW Machine weight: 17500 kg Dimensions (W x D x H): 4.6 x 3.6 x 3.6 m Condition: good, ready for use Accessories: approx. 40 holder, angular head

Category: 1200: machines and plants for process engineering
New in: used
Price: request quote
Location: Land-nl NL Barneveld The Netherlands
Seller: Foeth

Make Typhoon, No 89TY223-2, New 1989, Floorspace 0,45x0,45 M, Stirrer on stand (1x), Material stainless steel , Shaft length 600mm, Sizes stirring head dia. 88mm, Number of stirrers on shaft 1, Motor 0,55 KW, 220/380 Volt, Speed mixing shaft 1400 Rpm, Mounted on support , Adjustable height , Total height 1,5 MSTIRRERSMIXERS > STIRRERS What you can expect from Foeth: ?Machine is in working condition ?At a reduced price compared to new ?Ready for shipping to any destination worldwide ?You are welcome to inspect the machine in Barneveld, The Netherlands. Visit our website FOETH dot COM for many more machines!

Category: 101: boring mills and machining centers
New in: new
Price: 8.820 €
Location: Land-de DE 58515 Lüdenscheid, Stüttingshauser Ringstr. 39
Seller: WTS Maschinenhandels KG

Thread cutting device Freischneiden Setup Drilling depth shut off programmable Drilling depth and speed display - digital Thread cutting device M30 (depending on elevation) R1 spindle speed with continuous transmission speed series 100-2000 1 / min R2 spindle speed with continuous transmission speed range 70-1400 1/min Drilling capacity 35/40 mm Spindle MK 4 Drilling depth 160 mm Throat depth 300 mm Usable surface (pivoting) 590 x 450 mm Feed 0-300 mm / min stepless Table height with rack and pinion Machine dimensions (W x D x H) 610 x 850 x 1920 mm Motor three-phase 400 V pole changing bar 1,5/3,0 kW Weight 420 kg Including drilling package consisting: taper mandrel, Chuc ...

Category: 1200: machines and plants for process engineering
New in: used
Price: request quote
Location: Land-nl NL Barneveld The Netherlands
Seller: Foeth

Make Donati srl Calcio (IT), Type PVC/R2, Mach.No. NTP 700/520, Elevator belt , Material mild steel , Belt material plastic , Belt width 530mm, Belt length 5200mm, With carriers , Carrier height 50mm, With side guides /brushes, With motor 1,5 KW, 220/380 Volt, Mounted on frame , Floorspace 7,0x1,2 MCONVEYOR BELTSCONVEYOR SCREWS > CONVEYOR BELTS What you can expect from Foeth: ?Machine is in working condition ?At a reduced price compared to new ?Ready for shipping to any destination worldwide ?You are welcome to inspect the machine in Barneveld, The Netherlands. Visit our website FOETH dot COM for many more machines!

Category: 101: boring mills and machining centers
New in: new
Price: 5.890 €
Location: Land-de DE 58515 Lüdenscheid, Stüttingshauser Ringstr. 39
Seller: WTS Maschinenhandels KG

Drilling depth and speed display - digital Thread cutting device M30 (depending on elevation) R1 spindle speed with continuous transmission speed series 100-2000 1 / min R2 spindle speed with continuous transmission speed range 70-1400 1/min Drilling capacity 35/40 mm Spindle MK 4 Drilling depth 160 mm Throat depth 300 mm Usable surface (pivoting) 590 x 450 mm Feed by hand Table height with rack and pinion Machine dimensions (W x D x H) 610 x 850 x 1920 mm Motor three-phase 400 V pole changing bar 1,5/3,0 kW Weight 420 kg Including drilling package consisting: taper mandrel, Chuck, Vice and T - Groove set. DELIVERY: free House including packaging NOT THE RIGHT MACHINE ...

Category: 1200: machines and plants for process engineering
New in: used
Price: request quote
Location: Land-nl NL Barneveld The Netherlands
Seller: Foeth

Make Donati srl Calcio (IT), Type PVC/R2, Mach.No. NTP 700/522, Elevator belt , Material mild steel , Belt material plastic , Belt width 540mm, Belt length 6000mm, With carriers , Carrier height 50mm, With side guides , With motor 1,5 KW, 220/380 Volt, Mounted on frame , Floorspace 6,3x1,1 MCONVEYOR BELTSCONVEYOR SCREWS > CONVEYOR BELTS What you can expect from Foeth: ?Machine is in working condition ?At a reduced price compared to new ?Ready for shipping to any destination worldwide ?You are welcome to inspect the machine in Barneveld, The Netherlands. Visit our website FOETH dot COM for many more machines!

Category: 401: filling machines
New in: 2001
Price: request quote
Location: Land-tr TR 43100 Kutahya, Adnan Menderes Bulv. Balikli Mah.Hicret sk.P.Hamit
Seller: Ozbek Machinery Trade

FOR SELL ! Used Waldner Yogurt Filling Machines Machine is working condation. One of the machines is 160 cap, and the vedeo is attached. This machine is filling between 750g and 1500g 118 Cap. Pictures of the 118 cap machine are attached. 350 to 500. Machines are not servos. Each machine has a format The information of WALDNER brand filling machines used in the yogurt section is as follows; Askt it for videos for machines Brand name WALDNER DOSOMAT-1 Model: Dosomat 10.3 Machinery No: 1972 Manufacture of year : 2001 Machine weyt : 2100 Kg Capacity : 4000 cup / h ( It may vary according to the package) Electrical: 230 / 400V 50Hz, 7.5kW Weather: 6 bar ...

Category: 1200: machines and plants for process engineering
New in: used
Price: request quote
Location: Land-nl NL Barneveld The Netherlands
Seller: Foeth

Make DMN-WESTINGHOUSE, Type AL 250 2D, No RVNL136780, New 2014, Rotary valve , House material stainless steel , Rotor material stainless steel , Rotor diameter 250mm, Rotor width 310mm, Inlet dia.250mm, Inlet flange sizes 406x250 stc.350, Outlet dia.250mm, Outlet flange sizes 406x250 stc.350, Daylight 450mm, With motor 1.1 KW, 219-241/380-420Volt, Rotor speed 25 rpm, Outer laying bearings , Air purged sealings , Capacity 19 Ltr/rev, Floorspace 1.2x0.6 M, Total height 0.45 MROTATING VALVESROTARY VALVES > ROTATING VALVES What you can expect from Foeth: ?Machine is in working condition ?At a reduced price compared to new ?Ready for shipping to any destination worldwide ?You are welcome to inspe ...

Category: 101: boring mills and machining centers
New in: 2015
Price: request quote
Location: Land-de DE 71706 Markgröningen, Dornierstr. 20
Seller: Wolfgang Finken GmbH

GENERAL Project No.: 904986 Number: 1 PCs. Manufacturer: CHIRON Type: DZ 15 FX Magnum high speed Control: Siemens 840 D solutionline Year of constr.: 2015 State of preservation: second-hand machine Stories about: 1-2 layers DESCRIPTION MILLING Travel in X 630 mm Travel in Y 400 mm Travel in Z 360 mm Maximum rapid traverse in X/Y/Z 75/75/75 m / min Maximum acceleration in X/Y/Z 0.7/1.0/1.2 g Direct measuring system X/Y/Z Tool holder HSK 63 Maximum speed milling spindle 12000 1/min Maximum power with ED 10-40 / 100% 37/17 kW Maximum torque at ED 10-40 / 100% 180 nm Vertically arranged 2 PCs. spindle/n Spindle distance 400 mm Chain-type tool magazine 2 Ã? 2 ...

Category: 1200: machines and plants for process engineering
New in: used
Price: request quote
Location: Land-nl NL Barneveld The Netherlands
Seller: Foeth

Make DMN-WESTINGHOUSE, No 148765/2A 20DV AX, Rotary valve for air transport , House material stainless steel , Rotor material stainless steel , Rotor diameter dia.175mm, Rotor width 200mm, Inlet dia.180, Inlet flange sizes 315x175 stc.270mm, Outlet dia.65mm, Outlet flange sizes 140x65 stc.120mm, Daylight 340mm, With motor 0.75 KW, 230/400Volt, Rotor speed 48 rpm, Outer laying bearings , Air purged sealings , Capacity 5.5 Ltr/rev, Floorspace 1.1x0.35 M, Total height 0.35 MROTATING VALVESROTARY VALVES > ROTATING VALVES What you can expect from Foeth: ?Machine is in working condition ?At a reduced price compared to new ?Ready for shipping to any destination worldwide ?You are welcome to inspect ...

Category: 101: boring mills and machining centers
New in: 2015
Price: request quote
Location: Land-de DE 71706 Markgröningen, Dornierstr. 20
Seller: Wolfgang Finken GmbH

GENERAL Project No.: 904987 Number: 1 PCs. Manufacturer: CHIRON Type: DZ 15 FX Magnum high speed Control: Siemens 840 D solutionline Year of constr.: 2015 State of preservation: second-hand machine Stories about: 1-2 layers DESCRIPTION MILLING Travel in X 630 mm Travel in Y 400 mm Travel in Z 360 mm Maximum rapid traverse in X/Y/Z 75/75/75 m / min Maximum acceleration in X/Y/Z 0.7/1.0/1.2 g Direct measuring system X/Y/Z Tool holder HSK 63 Maximum speed milling spindle 12000 1/min Maximum power with ED 10-40 / 100% 37/17 kW Maximum torque at ED 10-40 / 100% 180 nm Vertically arranged 2 PCs. spindle/n Spindle distance 400 mm Chain-type tool magazine 2 Ã? 2 ...

Category: 1200: machines and plants for process engineering
New in: used
Price: request quote
Location: Land-nl NL Barneveld The Netherlands
Seller: Foeth

Make DMN-WESTINGHOUSE, No 148765/2A 20DV AX, Rotary valve for air transport , House material stainless steel , Rotor material stainless steel , Rotor diameter dia.175mm, Rotor width 200mm, Inlet dia.180mm, Inlet flange sizes 315x175 stc,270mm, Outlet dia.65mm, Outlet flange sizes 140x65 stc.120mm, Daylight 340mm, With motor 0.75 KW, 230/400Volt, Rotor speed 48 rpm, Outer laying bearings , Air purged sealings , Capacity 5.5 Ltr/rev, Floorspace 1.1x0.35 M, Total height 0.35 MROTATING VALVESROTARY VALVES > ROTATING VALVES What you can expect from Foeth: ?Machine is in working condition ?At a reduced price compared to new ?Ready for shipping to any destination worldwide ?You are welcome to inspe ...

Category: 101: boring mills and machining centers
New in: 2014
Price: request quote
Location: Land-de DE 71706 Markgröningen, Dornierstr. 20
Seller: Wolfgang Finken GmbH

GENERAL Project No.: 904988 Number: 1 PCs. Manufacturer: CHIRON Type: DZ 15 FX Magnum high speed Control: Siemens 840 D solutionline Construction year: 2014 State of preservation: second-hand machine Stories about: 1-2 layers DESCRIPTION MILLING Travel in X 630 mm Travel in Y 400 mm Travel in Z 360 mm Maximum rapid traverse in X/Y/Z 75/75/75 m / min Maximum acceleration in X/Y/Z 0.7/1.0/1.2 g Direct measuring system X/Y/Z Tool holder HSK 63 Maximum speed milling spindle 12000 1/min Maximum power with ED 10-40 / 100% 37/17 kW Maximum torque at ED 10-40 / 100% 180 nm Vertically arranged 2 PCs. spindle/n Spindle distance 400 mm Chain-type tool magazine 2 à...

Category: 1200: machines and plants for process engineering
New in: used
Price: request quote
Location: Land-nl NL Barneveld The Netherlands
Seller: Foeth

Make DMN-WESTINGHOUSE, No 148765/2A 20DV AX, Rotary valve for air transport , House material stainless steel , Rotor material stainless steel , Rotor diameter dia.175mm, Rotor width 200mm, Inlet dia.180mm, Inlet flange sizes 315x175 stc.270mm, Outlet dia.65mm, Outlet flange sizes 140x65 stc.120mm, Daylight 340mm, With motor 0.75 KW, 230/400Volt, Rotor speed 48 rpm, Outer laying bearings , Air purged sealings , Capacity 5.5 Ltr/rev, Floorspace 1.1X0.35 M, Total height 0.35 MROTATING VALVESROTARY VALVES > ROTATING VALVES What you can expect from Foeth: ?Machine is in working condition ?At a reduced price compared to new ?Ready for shipping to any destination worldwide ?You are welcome to inspe ...

Category: 101: boring mills and machining centers
New in: 2007
Price: request quote
Location: Land-de DE 71706 Markgröningen, Dornierstr. 20
Seller: Wolfgang Finken GmbH

GENERAL Project No.: 904998 Number: 1 PCs. Manufacturer: SW (Swabian machine tools) Type: BA W06-22 Control: Siemens 840 D Year of manufacture: 2007 State of preservation: second-hand machine Stories about: 2-3 layers DESCRIPTION MILLING Travel in X 600 mm Travel in Y (875) 600 mm Travel in Z 500 mm Maximum rapid traverse in X/Y/Z 100/100/100 m / min Maximum acceleration in X/Y/Z 12/10/20 m / s2 Feed force in the X/Y/Z 10000/10000 / 2 Ã? 5000 N Direct measuring system X/Y/Z/A(U)/C1(C2)/W1(W2) Linear actuator x/Y/Z Tool holder HSK-A 63 Maximum speed milling spindle 17500 1/min Maximum power with ED 10-40 / 100% 35/26 kW Maximum torque at ED 10-40 / 100% 80 ...

Category: 1200: machines and plants for process engineering
New in: used
Price: request quote
Location: Land-nl NL Barneveld The Netherlands
Seller: Foeth

Make JONGERIUS (screw), Type E-102, New 1993, Horizontal conveyor screw , Material stainless steel , Length (total) 2700mm, Pitch 120mm, With hopper , Inlet (2x) dia.200mm, Outlet dia.150mm, Motor 2.2 KW, 220/380Volt (15-76rpm), Outlet height 1000mm, With covers , Mounted on frame , Floorspace 3,6x1,9M, Total height 3,5 M, Weight 1300 KGHORIZONTAL CONVEYOR SCREWSCONVEYOR SCREWS > HORIZONTAL CONVEYOR SCREWS What you can expect from Foeth: ?Machine is in working condition ?At a reduced price compared to new ?Ready for shipping to any destination worldwide ?You are welcome to inspect the machine in Barneveld, The Netherlands. Visit our website FOETH dot COM for many more machines!

Category: 102: lathes
New in: 2017
Price: request quote
Location: Land-de DE 71706 Markgröningen, Dornierstr. 20
Seller: Wolfgang Finken GmbH

GENERAL Project No.: 905001 Number: 1 PCs. Manufacturer: Gildemeister Type: CTV 250 Control: Siemens 840 D SlimLine Year of constr.: 2017 State of preservation: second-hand machine Machine a (hours): 7,600 Spindle a (hours): 4,900 DESCRIPTION TURNING Axes X/Y/Z/C Maximum turning length 200 mm Maximum swing over bed cover 350 mm Maximum Chuck diameter 250 mm Max speed main spindle 5000 1/min Maximum performance main spindle in ED 10-40 / 100% 25 kW Maximum torque of main spindle in ED 10-40 / 100% 280 NM Main spindle spindle passage 57 mm Spindle diameter in front bearing spindle 120 mm Spindle flange size main spindle 170 h 5 Axes on the main spindle unit X/Z/C  ...

Category: 1200: machines and plants for process engineering
New in: used
Price: request quote
Location: Land-nl NL Barneveld The Netherlands
Seller: Foeth

Make Flottweg GmbH Vilsbiburg (DE), Type Z 73, No 910670, Decanter , Material stainless steel , Screw diameter +/- 720mm, Screw length 3100mm, Inlet dia.100mm, Motor Tromel 45 KW, 400 Volt, With variable speed drive , Hydraulic drive , With hydraulic unit , Motor 22 KW, 400 Volt,, Max. rotor speed 2340 rpm, Floorspace 5,0x2,5 M, Weight 1000KGDECANTERSCENTRIFUGES > DECANTERS What you can expect from Foeth: ?Machine is in working condition ?At a reduced price compared to new ?Ready for shipping to any destination worldwide ?You are welcome to inspect the machine in Barneveld, The Netherlands. Visit our website FOETH dot COM for many more machines!

Category: 102: lathes
New in: 2017
Price: request quote
Location: Land-de DE 71706 Markgröningen, Dornierstr. 20
Seller: Wolfgang Finken GmbH

GENERAL Project No.: 905002 Number: 1 PCs. Manufacturer: Gildemeister Type: CTV 250 Control: Siemens 840 D SlimLine Year of constr.: 2017 State of preservation: second-hand machine Machine a (hours): 6,300 Spindle a (hours): 4,400 DESCRIPTION TURNING Axes X/Z/C Maximum turning length 200 mm Maximum swing over bed cover 350 mm Maximum Chuck diameter 250 mm Max speed main spindle 5000 1/min Maximum performance main spindle in ED 10-40 / 100% 25 kW Maximum torque of main spindle in ED 10-40 / 100% 280 NM Main spindle spindle passage 57 mm Spindle diameter in front bearing spindle 120 mm Spindle flange size main spindle 170 h 5 Axes on the main spindle unit X/Z/C T ...

Category: 1200: machines and plants for process engineering
New in: used
Price: request quote
Location: Land-nl NL Barneveld The Netherlands
Seller: Foeth

Make Flottweg, Type Z73-4 /451, No 910669, Decanter , Material stainless steel , Screw diameter +/- 720mm, Screw length 3100mm, Inlet 100mm, Motor Trommel 45 KW, 400 Volt, With variable speed drive , Hydraulic drive , With hydraulic unit , Motor Schroef 22KW, 400 Volt, Max. rotor speed 2340 rpm, Floorspace 5,0x2,5 M, Weight 10000KGDECANTERSCENTRIFUGES > DECANTERS What you can expect from Foeth: ?Machine is in working condition ?At a reduced price compared to new ?Ready for shipping to any destination worldwide ?You are welcome to inspect the machine in Barneveld, The Netherlands. Visit our website FOETH dot COM for many more machines!

Category: 101: boring mills and machining centers
New in: 2010
Price: request quote
Location: Land-de DE 71706 Markgröningen, Dornierstr. 20
Seller: Wolfgang Finken GmbH

GENERAL Project No.: 905003 Number: 1 PCs. Manufacturer: SW (Swabian machine tools) Type: BA W06-22 Control: Siemens 840 D Year of construction: 2010 State of preservation: second-hand machine Stories about: 2-3 layers DESCRIPTION MILLING Travel in X 600 mm Travel in Y (875) 600 mm Travel in Z 500 mm Maximum rapid traverse in X/Y/Z 100/100/100 m / min Maximum acceleration in X/Y/Z 12/10/20 m / s2 Feed force in the X/Y/Z 10000/10000 / 2 Ã? 5000 N Direct measuring system X/Y/Z/A(U)/C1(C2)/W1(W2) Linear actuator x/Y/Z Tool holder HSK-A 63 Maximum speed milling spindle 17500 1/min Maximum power with ED 10-40 / 100% 35/26 kW Maximum torque at ED 10-40 / 100% 8 ...

Category: 1200: machines and plants for process engineering
New in: used
Price: request quote
Location: Land-nl NL Barneveld The Netherlands
Seller: Foeth

Make unknown, New unknown, Floorspace 4,6x0,7 M, Vertical conveyor screw (1x), Tube-model , Material stainless steel , Diameter ± 240mm, Length 3400mm, Inlet dia. 150mm, Outlet ± dia. 250mm, Motor 4,0 KW, 220-240/380-415 Volt, Screw speed ± 114 RpmVERTICAL CONVEYOR SCREWSCONVEYOR SCREWS > VERTICAL CONVEYOR SCREWS What you can expect from Foeth: ?Machine is in working condition ?At a reduced price compared to new ?Ready for shipping to any destination worldwide ?You are welcome to inspect the machine in Barneveld, The Netherlands. Visit our website FOETH dot COM for many more machines!

Category: 708: refrigeration engineering
New in: 2009
Price: request quote
Location: Land-nl NL Mijdrecht, The Netherlands
Seller: VRT International B.V.

HELPMAN THOR-A 524-7 Product number: M19-2276 Cooling capacity: 21.9 kW Number of fans: 2 Lamella distance: 7 mm Defrost: Glycol Refrigerant: CO2/R744 Rated voltage: 400 Volt Engine power: 2 x 3.2 kW Dimensions: 2550 x 1200 x 1100 mm Weight: 255 kg Year of construction: 2009 Units in stock: 8 piece (s) Price: request a quote Very neat Helpman CO2 evaporator with 2 EC fans and glycol defrosting circuit. Listed capacity in an evaporation temperature of-4 ° c and 6 k.

Category: 1200: machines and plants for process engineering
New in: used
Price: request quote
Location: Land-nl NL Barneveld The Netherlands
Seller: Foeth

Make Donati srl Calcio (IT), Type PVC/R2, Mach.No. NTP 700/523, Elevator belt , Material mild steel , Belt material plastic , Belt width 500mm, Belt length 10500mm, With motor 1,5 KW, 220/380 Volt, Floorspace 11x0,6 MCONVEYOR BELTSCONVEYOR SCREWS > CONVEYOR BELTS What you can expect from Foeth: ?Machine is in working condition ?At a reduced price compared to new ?Ready for shipping to any destination worldwide ?You are welcome to inspect the machine in Barneveld, The Netherlands. Visit our website FOETH dot COM for many more machines!

Category: 101: boring mills and machining centers
New in: 2009
Price: request quote
Location: Land-de DE 71706 Markgröningen, Dornierstr. 20
Seller: Wolfgang Finken GmbH

GENERAL Project No.: 905004 Number: 1 PCs. Manufacturer: SW (Swabian machine tools) Type: BA W06-22 Control: Siemens 840 D Year of manufacture: 2009 State of preservation: second-hand machine Stories about: 2-3 layers DESCRIPTION MILLING Travel in X 600 mm Travel in Y (875) 600 mm Travel in Z 500 mm Maximum rapid traverse in X/Y/Z 100/100/100 m / min Maximum acceleration in X/Y/Z 12/10/20 m / s2 Feed force in the X/Y/Z 10000/10000 / 2 Ã? 5000 N Direct measuring system X/Y/Z/A(U)/C1(C2)/W1(W2) Linear actuator x/Y/Z Tool holder HSK-A 63 Maximum speed milling spindle 17500 1/min Maximum power with ED 10-40 / 100% 35/26 kW Maximum torque at ED 10-40 / 100% 80 ...

Category: 1200: machines and plants for process engineering
New in: used
Price: request quote
Location: Land-nl NL Barneveld The Netherlands
Seller: Foeth

Make unknown, Vessel dia. 400x500mm, Extra Specifications Equipped with paddle stirrer, Motor 0,11 KW, 220/380 Volt variable speed drive, Dim. 0,7x0,4 M, Height 0,8 M , Mixer Stirring vessel for granulate (1x), Material stainless steel , Inlet 2x dia. 100mm, With switch, Capacity 50 Ltr, Outlet 150x120mm (sliding valve)MISCELLANEOUS MIXERSMISCELLANEOUS > MISCELLANEOUS MIXERS What you can expect from Foeth: ?Machine is in working condition ?At a reduced price compared to new ?Ready for shipping to any destination worldwide ?You are welcome to inspect the machine in Barneveld, The Netherlands. Visit our website FOETH dot COM for many more machines!

Category: 102: lathes
New in: 1996
Price: request quote
Location: Land-de DE 71706 Markgröningen, Dornierstr. 20
Seller: Wolfgang Finken GmbH

GENERAL Project No.: 905005 Number: 1 PCs. Manufacturer: TRAUB Type: TNC 65 DGY Control: Traub TX 8F Year of construction: 1996 (2011) State of preservation: second-hand machine Machine a (hours): 18,500 Stories about: 1 layers DESCRIPTION TURNING Maximum turning diameter 300 mm Maximum turning length 450 mm Maximum swing over bed cover 480 mm Maximum Chuck diameter 175 mm Max speed main spindle 5600 1/min Maximum performance main spindle in ED 10-40 / 100% 18.5 kW Main spindle spindle passage 65 mm Spindle flange size A6 main spindle Axes on the main spindle unit C Hollow clamping cylinder to the main spindle Maximum rotation speed 5600 1/min spindle Maximum p ...

Category: 1200: machines and plants for process engineering
New in: used
Price: request quote
Location: Land-nl NL Barneveld The Netherlands
Seller: Foeth

Make Belovo Engineering Belgie, No 04 46, Spray dryer , Material stainless steel , Drying tower dia. 1000mm, Cylindrical height 70mm, Conical height 1000mm, Outlet dia.50mm, With nozzle atomiser , Air heating (electric) 15000 watt, 400 Volt, With cyclone , Cyclone sizes dia.190mmxx 500mm, With dust filter , Filter surface 560x560mm, With fan , Motor 2,2 KW, 220/380/ Volt, Mounted on frame , Floorspace 2.7x1,4 M, Total height 2.3 M, Weight +/- 500 KGSPRAY DRYERSDRYERS > SPRAY DRYERS What you can expect from Foeth: ?Machine is in working condition ?At a reduced price compared to new ?Ready for shipping to any destination worldwide ?You are welcome to inspect the machine in Barneveld, The Nethe ...

Category: 101: boring mills and machining centers
New in: 2001
Price: request quote
Location: Land-de DE 71706 Markgröningen, Dornierstr. 20
Seller: Wolfgang Finken GmbH

GENERAL Project No.: 905006 Number: 1 PCs. Manufacturer: STAMA Type: MC 531 / S Control: Fanuc 18i M Year of construction: 2001 State of preservation: second-hand machine Stories about: 1 layers DESCRIPTION MILLING Travel in X 1600 mm Travel in Y 400 mm Travel in Z 350 mm Maximum rapid traverse in X/Y/Z 45/45/45 m / min Maximum feed speed in X/Y/Z 10/10/10 m / min Maximum acceleration in X/Y/Z 3/7/12 m / s2 Feed force in the X/Y/Z 7000/7000/12000 N Direct measuring system X/Y/Z Tool holder HSK 63 Maximum speed milling spindle 9000 1/min Maximum power with ED 10-40 / 100% 48/14 kW Maximum torque at ED 10-40 / 100% 154/45 nm Spindle diameter in front bearing 65 m ...

Category: 1200: machines and plants for process engineering
New in: used
Price: request quote
Location: Land-nl NL Barneveld The Netherlands
Seller: Foeth

Make Donati srl Calcio (IT), Type PVC/R2, Mach.No. NTP 700/519, New 2013, Elevator belt , Material mild steel , Belt material plastic , Belt width 540mm, Belt length 4000mm, With carriers , Carrier height 50mm, With side guides /brushes, With motor 1,5 KW, 230/400 Volt, Floorspace 4,6x1,1 MCONVEYOR BELTSCONVEYOR SCREWS > CONVEYOR BELTS What you can expect from Foeth: ?Machine is in working condition ?At a reduced price compared to new ?Ready for shipping to any destination worldwide ?You are welcome to inspect the machine in Barneveld, The Netherlands. Visit our website FOETH dot COM for many more machines!

Category: 102: lathes
New in: 2002
Price: request quote
Location: Land-de DE 71706 Markgröningen, Dornierstr. 20
Seller: Wolfgang Finken GmbH

GENERAL Project No.: 905007 Number: 1 PCs. Manufacturer: Gildemeister Type: TWIN 65 RG2 Control: Siemens 840 D powerline Year of construction: 2002 State of preservation: second-hand machine Machine a (hours): 69.200 Spindle a (hours): 34.100 DESCRIPTION TURNING Maximum turning diameter 200 mm Maximum swing over bed cover 250 mm Maximum Chuck diameter 250 mm Max speed main spindle 5000 1/min Maximum performance main spindle in ED 10-40 / 100% 37/25 kW Maximum torque of main spindle in ED 10-40 / 100% 390/270 NM Main spindle spindle passage 65 mm Spindle diameter in front bearing spindle 120 mm Spindle flange size main spindle 170 h 5 Hollow clamping cylinder to t ...

Category: 1200: machines and plants for process engineering
New in: used
Price: request quote
Location: Land-nl NL Barneveld The Netherlands
Seller: Foeth

Make Mikropul gmbh, Type ACM-10, Mounted on frame , With switchgear , Grinder Classifier system, Material stainless steel , Grinding room size dia. 310mm, Fixed hammers , With grinding track , Inlet dia. 50mm, Feeding with rotating valve , Motor 7,5 KW 380 Volt , 1,1 KW 220/380 Volt, Floorspace ± 3,3 x 2,2 M, Total height 2,7 M, Weight ± 1600 KG, Extra Specifications 1x ventilator Van Tongeren kennemer type S395/3/4800 11KW, 400/690 Volt, 1x dosing screw dia. 225mm 0,37 KW, 220/380 Volt, 1x dustcollector Donaldson TDP675 230 Volt, 1x cyclonefilter :Van Tongeren kennemer type AC850/3.0, 1x cabinet. + OVERHAULED +SIZE REDUCTION MILLSGRINDERS > SIZE REDUCTION MILLS What you can expect from F ...

Category: 101: boring mills and machining centers
New in: 1996
Price: 23.000 €
Location: Land-fr FR 67500 HAGUENAU, 20 RUE AMPERE
Seller: SOCIETE FIMOTEC

M machine type machining center - universal make MATEC type 30 L year 1996 control type CNC storage Switzerland origin state of Baden - Württemberg delivery time upon request of freight basis EXW P Technical details x trail 2000 mm y way 420 mm z trail 500 mm control HEIDENHAIN TNC 407 table dimensions 2500 X 630 mm slot number 7 T-18 H8 grooves 100 mm speed range mm T - slot distance 6000 RPM power at 40% / 100% ED 30 / 17 KW torque at 40% / 100% ED 190 / 120 NM Feed x/y/z 30 m/min tool length of 350 mm max tool weight of Max 10 kg tool diameter 70 mm tool diameter with free Nebenpl. 130 mm tool holder SK 40 tool magazine with 36 seats total power 45 kW machine weight 10 tons of spac ...

Category: 1200: machines and plants for process engineering
New in: used
Price: request quote
Location: Land-nl NL Barneveld The Netherlands
Seller: Foeth

Make Hosokawa Micron bv, Type Cyclomix 250, No 6668601000, New 2002, Powder turbo mixer , Material stainless steel , Capacity 250 Ltr, Inlet dia. 230mm,, Top connections dia. 100mm, 2x dia.55mm, Outlet dia. 230mm, Working pressure 0,95 Bar, With jacket 26 Ltr, Working pressure 3 Bar, Glands air purged mechanical seal, Motor 22 KW, 400/690 Volt, Speed mixing shaft 20 - 250 rpm, Mounted on frame , Floorspace 2,5x1,3 M, Total height 2,3 M, Weight 2000 KG, Extra Specifications excl.uitloopschuifPOWDER TURBO MIXERSMIXERS > POWDER TURBO MIXERS What you can expect from Foeth: ?Machine is in working condition ?At a reduced price compared to new ?Ready for shipping to any destination worldwide ?You a ...

Category: 901: tractors
New in: used
Price: request quote
Location: Land-at AT Texing
Seller: Karner & Dechow Industrie-Auktionen Ges.m.b.H.

last off Code: DL-367DR registration: 25.04.2014 elapsed. Hours of operation: 500,6 performance: 74, 9kW displacement: 4. 400ccm test badge: 4/2017 drive type: diesel maximum speed: Motornr.: Perkins 4-cylinder, turbo-diesel 4.4 l type, variant, version: T-L1/T1 003SP / - FIN: 10STG00495 equity / total weight: 3.843/6.000kg Facilities: 4 course, div. control panels, air conditioning, front and rear license Launcher, additional lighting, tray plateau, div. storage compartments, front hydraulic Lesnik PREDNJA HIDRAVLIKA SHL 24, year 2014, Powershiftgetriebe with load speed, power shuttle on the steering wheel is switchable, 32/32-speed transmission 3 DW rule hydraulic control units in the re ...

Category: 1200: machines and plants for process engineering
New in: used
Price: request quote
Location: Land-nl NL Barneveld The Netherlands
Seller: Foeth

Type UM-44 E, No unknown manufacturingtag is missing, Mounted on frame , Cutter , Material stainless steel , Capacity 44 Ltr, Diameter 490 mm, Depth 270 mm, With scraper (motor 0,75 KW, 220.380 Volt -37 Rpm), Can be tilted , Working pressure vacuum, With jacket , Working pressure unknown, Max. temperature unknown, Motor , Floorspace 1,3x1,1 M, Total height 1,8 M, Weight 400 KGCUTTERSGRINDERS > CUTTERS What you can expect from Foeth: ?Machine is in working condition ?At a reduced price compared to new ?Ready for shipping to any destination worldwide ?You are welcome to inspect the machine in Barneveld, The Netherlands. Visit our website FOETH dot COM for many more machines!

Category: 102: lathes
New in: 2017
Price: request quote
Location: Land-cz CZ 61600 Brno, Králova 279/9
Seller: KAXIMA International, s.r.o.

Manufacturer MAZAK Year 2017 Mazatrol smart control system Maximum swing diameter of 580 mm Chuck size 8" Bar passage 51 mm Centering spindle axis 1 020 mm MAIN SPINDLE Max speed 4000 U / min Motor power 11.0 kW Maximum torque 131 NM Number of stations on the drum revolver 8 Driver 25 mm Bohrstangenschaftdurchmesser max 32 mm Indexing time (a step) 0.20 s Rapid traverse (x) 30 m / min Rapid traverse (Z axis) 30 m / min Range (X-axis) 140 mm Range (Z axis) 305 mm Content of the cooling container 160 L Performance (30 minutes load) 20,16 kVA Power consumption (continuous) 20.2 kVA ACCESSORIES Transformer type Setting tools Ankerpads 8-position drum head (bolt typ ...

Category: 1200: machines and plants for process engineering
New in: used
Price: request quote
Location: Land-nl NL Barneveld The Netherlands
Seller: Foeth

Make Rucon ventilatoren Harderwijk (NL), Type VCM 631 N4, No 04.6484, Mach.No. 131829/004/4404, Material mild steel , Motor 26,35 KW, 440 Volt, Capacity 7000 m3/h, Floor space 1,4x1,4 M, Total height 1,4 M, Weight 430 KGMISCELLANEOUSMISCELLANEOUS > MISCELLANEOUS What you can expect from Foeth: ?Machine is in working condition ?At a reduced price compared to new ?Ready for shipping to any destination worldwide ?You are welcome to inspect the machine in Barneveld, The Netherlands. Visit our website FOETH dot COM for many more machines!

Category: 101: boring mills and machining centers
New in: new
Price: 8.100 €
Location: Land-de DE 58515 Lüdenscheid, Stüttingshauser Ringstr. 39
Seller: WTS Maschinenhandels KG

Thread cutting device Freischneiden device drilling depth shut off programmable drilling depth and speed display - digital thread cutter M24 (gradient-dependent) variable speed 125-2000 1 / min drilling capacity 25/30 mm spindle MK 3 drilling depth 125 mm projection of 280 mm-usable desk space (pivoting) 420 x 340 mm Feed 0-300 mm / min stepless adjustable anvil with rack machines dimensions (W x D x H) 520 x 820 x 1900 mm motor three-phase 400 V pole changing bar 1.5 / 2 kW weight 300 kg including drilling package, which includes: taper mandrel, Chuck, Vice and T - Groove set. Option: spindle stop and chip fracture module 690 EUR delivery: free House including packaging not the right mac ...

Category: 1200: machines and plants for process engineering
New in: used
Price: request quote
Location: Land-nl NL Barneveld The Netherlands
Seller: Foeth

Make Rucon ventilatoren Harderwijk (NL), Type VCM 631 N4, No 04.6484, Mach.No. 131892/003/4404, Material mild steel , Motor 26,5 KW, 440 Volt, 60 Hz, Capacity 7000 m3/h, Floor space 1,4x1,4 M, Total height 1,4 M, Weight 430 KGMISCELLANEOUSMISCELLANEOUS > MISCELLANEOUS What you can expect from Foeth: ?Machine is in working condition ?At a reduced price compared to new ?Ready for shipping to any destination worldwide ?You are welcome to inspect the machine in Barneveld, The Netherlands. Visit our website FOETH dot COM for many more machines!

Category: 102: lathes
New in: 2018
Price: request quote
Location: Land-cz CZ 61600 Brno, Králova 279/9
Seller: KAXIMA International, s.r.o.

Manufacturer: MAZAK Year of construction: 2018 Machine control: Mazatrol SmoothC CNC Bed 250 mm (universal) Maximum spindle rotation speed 4000 min-1 Main spindle power 11 kW Main spindle feed 8 "by Chuck B 218A0615 (51 mm round) Standard accessories: Transformer type SD memory interface (1 port) + (1 port) USB interface setting tool Tool holder set (6) Coasters for anchoring 8-position drum head (bolt type)

Category: 1200: machines and plants for process engineering
New in: used
Price: request quote
Location: Land-nl NL Barneveld The Netherlands
Seller: Foeth

Make Hüttlin Coating-Technik GmbH Steinen, Type Butterfly HB-750, No HUE-100794, New 1994, Coating installation Film coating line (1x), Material stainless steel (304), Batch size 200-600 KG, Pan diameter 2070mm, Pan depth 1560mm, In-/Outlet dia. 700mm, Motor ± 9,2 KW, 400 Volt, With frequency controller , Pan speed ± 1,5-15 Rpm, With electric heating (210 KW), With fan (2x), Motor 7,5 KW, 380 Volt + 15,0 KW, 400/690 Volt, With air filter (2x) DCE Unimaster, Type UMA-454 V, With spraying arm , With dosing pump make Walther Trowal, Mounted on frame , With switchgear , Floorspace 3,7x2,3 M, Total height 3,2 M, Weight 5000 KGCOATING PANSCOATING PANS > COATING PANS What you can expect from Foe ...

Category: 101: boring mills and machining centers
New in: new
Price: 7.990 €
Location: Land-de DE 58515 Lüdenscheid, Stüttingshauser Ringstr. 39
Seller: WTS Maschinenhandels KG

Thread cutting device Freischneiden Setup Drilling depth shut off programmable Drilling depth and speed display - digital Thread cutter M20 (depending on elevation) variable speed of 125-4000 U/mon in two stages, stage change of belt apportionment. Drilling capacity 25/30 mm Spindle MK 3 Drilling depth 125 mm Projection 280 mm Usable surface (pivoting) 420 x 340 mm Feed 0-300 mm / min stepless Table height with rack and pinion Machine dimensions (W x D x H) 520 x 820 x 1900 mm Motor three-phase 400 V pole changing bar 0.9 / 1.45 kW Weight 300 kg Including drilling package consisting: taper mandrel, Chuck, Vice and T - Groove set. Option: spindle stop and chip fracture m ...

Category: 1519: attachments and spare parts
New in: 2002
Price: 17.500 €
Location: Land-nl NL Oudenbosch
Seller: DPX Power BV

; Gross weight [kg]: 1300; Accessories: 50Hz / 60Hz, 380V / 440V

Category: 101: boring mills and machining centers
New in: new
Price: 5.175 €
Location: Land-de DE 58515 Lüdenscheid, Stüttingshauser Ringstr. 39
Seller: WTS Maschinenhandels KG

ear-deep and speed display - digital thread cutter M20 (gradient-dependent) variable speed 125-4000 U/Mon in two stages, stage change of belt apportionment. Drilling capacity 525/30 mm of thread cutting capacity (depending on elevation) M20 spindle MK 3 drilling depth 125 mm projection of 280 mm-usable table surface (pivoting) 420 x 340 mm Feed rate of hand table height with rack machines dimensions (W x D x H) 520 x 820 x 1900 mm motor three-phase 400 V pole changing bar 0.9 / 1.45 kW weight 275 kg

Category: 103: milling machines
New in: 1989
Price: request quote
Location: Werk
Seller: SK Maschinen-Service GmbH

x-travel: 900 mm y-travel: 500 mm z-travel: 500 mm table-size: Ø 500 mm spindle taper ISO: 40 spindle turning speed - stepless: 20-5000 U/min voltage: 380 V CNC-control: HEIDENHAIN TNC 355 quill stroke: 90 mm spindle drive: 11,5 kW weight of the machine ca.: 4,1 t dimensions of the machine ca.: 3,15 x 2,8 x 2 m Control: Heidenhain TNC 355 with automatich tool changer 10-fold

Category: 103: milling machines
New in: 2016
Price: request quote
Location: Land-cz CZ 62700 Brno, Tu?anka 104 Tu?anka 104
Seller: Herr Radek Procházka

Control HEIDENHAIN... TNC 620 Clamping table surface... 1800 x 700mm X axis... 1600mm Y axis... 750mm Z axis... 900mm Maximum table load... 3000kg ISO 50 Spindle speed... 0-4000 RPM Power of main engine... 20/30kW Magazine places... 24 Feed... 10000mm / min Rapid traverse axis X... 16m / min Rapid traverse axis Y... 16m / min Rapid traverse axis Z... 12m / min The weight of the machine... 13000kg In very good condition, possible to try out under power.

Category: 103: milling machines
New in: 1970
Price: request quote
Location: Tönisvorst
Seller: SK Maschinen-Service GmbH

max. wheel diameter: 400 mm gear width: 300 mm max. module: 6 min. module: table diameter: 400 mm table hole: 80 mm diameter of hob: max. 160 mm cutter length max.: 160 mm distance workpiece - pinion type cutter max.: 300 mm distance workpiece - pinion type cutter min.: 30 mm spindle taper MT: 4 hob turning speeds: 80 - 500 U/min axial-feeds: 0,4 - 4,9 mm/U radial feeds: 0,1 - 1,22 mm/U tangential feed: 0,17 - 2,1 mm/U total power requirement: 17 kW weight of the machine ca.: 4,6 t dimensions of the machine ca.: 2,9 x 1,8 x 2,2 m change gears: counterstay swivelling

Category: 103: milling machines
New in: 2006
Price: request quote
Location: Land-de DE 47800 Krefeld, Am Sonnenhof 16
Seller: Asset-Trade - Bewertung & Vermarktung

Used DMG DMU 50 Evolution linear - 5 axis machining center universal NEW spindle ! Control HEIDENHAIN iTNC 530 Technical specifications: Travels x-way 500 mm y-way 450 mm z-way 400 mm Swivel range B: 108 ° Turning range C: 360 ° Rapid traverse 24 m / min Feed force 4.8 kN Feed rate 1 - 24,000 mm / min main spindle Speed range: 20 - 18,000 rpm Drive power: 35/25 kW Max. Torque: 30 Nm Table clamping surface 500 x 380 mm Max. Table load 200 kg T-slots 5x 14 x 63 mm Tools Number of tool positions 30 pos.

Category: 102: lathes
New in: 1994
Price: request quote
Location: 89312 Günzburg
Seller: Ralf Schmeißer Werkzeugmaschinen

turning diameter over bed: 320 mm turning diameter over slide rest: 198 mm turning length: 650 mm turning speed range: 20 - 3000 U/min feeds - longitudinal: 0,02 - 0,63 mm/U feeds - cross: 0,32 x Längsvorschub mm/U 3-jaw-chuck diameter: max.165 mm centre height: 160 mm spindle bore: 40 mm spindle head: 55027 Motor power: 2,4/ 3 kw voltage: 400 V : 4 kw weight: 700 kg range L-W-H: ca. 1600 - 900 - 1390 mm Mechanic: very good: Optical condition: very good: The machine can be viewed under current.: 89 160 1588 380 V - 50 Hz colour: green accessories: 3 axis Heidenhain digital display VRZ 773 Multifix tool holder Size A with 6 inlets punch point - revolving (new) punch point - fix Bison ...

You didn't find your wanted machine? send wanted inquiry to all dealers (no registration necessary)