kw used for sale

Steam degreaser Fabr. RFT Cleaning and filter technology Type CLEAN MASTER CM 200-0 NTwith control program RDEP 60 for S 5 100 UTechnical specifications:Working space:Length: appro:. 2200 mmWidth: approx: 890 mmHeight: approx: 1150 mmDesorption temperature: approx: 80 - 180 degreesSteam level - Temperature: approx: 50 - 100 degreesSpraying device approx: 10 secondsP max: 14 kWL x W x H approx.: 4500 x 2100 x 1800 mmWeight: approx: 2500 kgWith- Control program RDEP 60 for S 5 100 Uused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Rapid radial drilling machine make GENKO type ATB 30 SYear 1972Drilling capacity i. ST 60:25 mmDrilling assets i. ST 60:32 mmSpindle mount MK 3Quill stroke 150 mmDistance spindle / base smallest/biggest 620 / 1800 mmRadial arm adjustable vert. 1180 mmMovement horizontally on carriage mot.: 1900 mmMovement of the boom hor. 600 mmBoom rotatable by 360 °Spindle head tiltable on both sides up to 45 °14 spindle speeds 22 - 1920 rpm.3 aut. Feeds 0.1; 0.2; 0.3 mm / rev.Drive power 1.5 kWWeight approx 1.5 tExternal dimensions approx 3350 x 700 x 2800 mmWith- aut. feed- hydr. central locking- Tapping device- motor stroke movement- central hydr. clamping- motorized travel = 1900 mm on base carriageused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be ple ...

Rapid radial drilling machine make VOLZ (ADRIASTROJ) type BRB-32FMachine -No: 4/97/12 built in 1997Technical specifications:Drilling capacity in St: 3 - 32 mmDrilling capacity in Gg: 3 - 40 mmThread cutting in St: M2 - M32Thread cutting in Gg: M2 - M33Morse taper: MK 4Quill stroke: 180 mmmin. Distance spindle / column: 380 mmSwiveling the boom: 360 °min./max. Distance table / spindle: 115/625 mmClamping surface: 1050 x 400 mmInfinitely variable spindle speeds: 12.5 - 3150 mm6 automatic feeds: 0.04 - 0.4 mmMotor power: 4.0 kWWeight approx: 2200 kgExternal dimensions approx .: 1900 x 1200 x 2200 mmWith- cooling device- Electromagnetic clutch- brake motorused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are alw ...

Metal cleaning plant make MAFAC Ernst Schwarz type P 100.50 DApparatus number 90056 804, year of construction 1990for cleaning production parts and toolsWorking space depth: 445/237 mmLength x width: 1000 x 500 mm:Capacity: 290 lExhaust air volume flow: 1000 m3 / hVolume flow pressure: approx. 4 l / min, 0.1 barCapacity: 200 kgPneumatic connection: 4 - 6 barElectric connection: 380 V, 50 HzDrive power: 0.9 kWWeight approx: 360 kgExternal dimensions L x W x H: 1300 x 1295 x 970 mmUse of chemical solvents with a flash point above 55 ° C(Stable in hazard class A III VbF) or lower explosion point VEP above 40 ° CAttention: This device is not explosion proofWith- Sheet steel interiorused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if yo ...

Tapping machine make VEB Hermann Matern type BSG 5Year 1984Tapping capacity8 spindle speeds: 130 - 1200 rpm.Projection: 340 mmQuill stroke: 40 mmTable size: 370 x 500 mmTable with 3 horizontal T-slotsTable movement up / down manually by handColumn diameter: 120 mmelec. Connection: 220/380 V / 50 HzConnected load: 0.42 kWExternal dimensions:Weight: 270 kgWith:- separate control cabinet with swivel control panel- Emergency stop button- Footrest on the bottom plate- V-belt drive- stepless speeds throughxa0xa0 retrofitted frequency inverter ROfre 899202 E, 0.37 kW- Drill chuck FS 6used, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Metal cleaning plant make BUPI-CLEANER type 5 HFabr. -No: 8022 Year 1980Inside dimension: 1500 x 1500 x 1000 mmBasket size: 1250 x 1250 mmWater content: 300 - 500 lMax. Heating temperature: 70 °Heating time of the car wash approx. 1 hr.Spray pressure: 4.3 barCleaning time approx. 10 - 15 min.Drive power: 7.5 kWHeating power: 9.0 kWDimensions L x W x H: 2000 x 2000 x 2400 mmWith- Time thermostat- Flap door- Access car with 2 basketsused, from an operational resolutionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

2-fold internal thread series drilling machine make WMW type MFIV 4Built in 1988Performance: M 4max thread cutting length through holes / blind holes: 18/24 mmMain spindle stroke: 32 mmmechanical main spindle feeds or thread pitches: 0.25-0.3-0.35-0.4-0,45-0,5-0,6:-0,7-0,8-1 mm / revSpindle speeds rpm: 500-710-1000-1400-2000-2800Drive power per machine: 0.25 kWWith- Leitpatronen- Change wheelsused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Hydraulic fixed angle notching machine make KNUTH type KKM 250.6Machine -No: 124780 built in 2002Technical specifications:max.sheet thickness at 45 kg: 6.0 mmCutting length: 250 mmCutting angle: 90 degreesStrokes per minute: 50Table size: 810 x 750 mmHydraulic oil tank: 40 lDrive power: 4.0 kWExternal dimensions approx .: 900 x 900 x 1150 mmWeight approx: 856 kgWith- foot switch- 2 adjustable angle lengthsused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Tapping machine make FLOTT type TBZ 15 GLFabr. -No: 3217748, built in 1990Technical specifications:Drilling capacity: 5 - 25 mmSpindle: MK 2Thread cutting: M 16Drilling depth: 80 mmProjection: 200 mmColumn diameter: 70 mmStroke: 80 mmTable surface (usable): 200 x 280 mmDistance spindle - table: 160 - 500 mmFeed drilling: by handFeed Thread cutting: with lead screw22 spindle speeds: 80 - 6300 rpm.Motor power: 0.55 / 0.75 kWWeight approx: 225 kgWith- Base cabinet- Lead screw (Leitpatrone)- Cooling device- Setting single clock / continuous cycleused, from an operational resolutionin good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Hydraulic notching machine make INDUMASCH type FA 250/6Year of construction 1995Technical specifications:fixed cutting head:90°Blade length: 250mmCutting capacity mild steel: 250 x 250 x 6.0 mmCutting capacity stainless steel: 250 x 250 x 4.0 mmTable dimensions approx.: 1000 x 790 mmMain Voltage: 380V 50HzDrive power: 3.0 kWApprox. weight: 810 kgDimensions approx.: 1000 x 1200 x 1250 mmwith- Electrical stroke adjustment with digital display- Inside stop- foot switch- automatic cutting gap adjustmentused, in very good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Disinfector - washer-disinfector make MIELE type G 7735 C2Fabr. -No: 12/18303188 built in 1991with Aqua-Purificator G 7749External dimensions L x D x H: 895 x 700 x 820 mmInner dimensions: 540 x 520 x 510 mmelec. Voltage: 380Velec. Power: 8.8 - 9.7 KWWith- microcomputer control unit- Water treatment Aqua-Purificator G 7749used, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Pipe end notching machine make PEDI type Gr. IIITool receiving width: 280 mmmax. pipe diameter 90 °: 90 mmwith notch 45 °: 50 mmCurrently equipped with maximum number of tools: 3 toolsTool size: 50 to 50 mmTool size: 45 to 50 mmTool size: 3/4 to 3/4 Diameter of the eccentric shaft: 70 mmDrive power: 2.2 kWWeight: 750 kgExternal dimensions L x W x H: 800 x 1000 x 1650 mmWith- additional tools:46 to 50 mm, 1 to 1- Footswitchused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Chip centrifuge make STEIMEL type S 4Machine -No: 1.85.054.09 built in 1985Technical specifications:Drum diameter: 400 mmDrum volume: 25 lDrum speed: 1000 rpm.Wall thickness: 8.0 mmMaterial: MST 37/21Output per hour: 12 batchesDrum content weight max.: 50 kgHeating capacity: 4.0 kWExternal dimensions approx .: 900 x 900 x 1400 mmWeight approx: 450 kgwith- 2 additional basketsused, in very good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Wastewater treatment plant / recycling centrifuge make SPALECK type ZM 4Serial -No: 104294 year of manufacture 1999for wastewater treatment from vibratory finishing systemsTechnical specifications:Cleaning performance: 800 l/hDirty water tank: 200 lSludge emptying: manualTotal power: 3.8 kWExternal dimensions L x W x H: 1650 x 650 x 1450 mmwith- CE markingused, in very good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Parts cleaning machine make AUTOP PERKUTE type JET 82 TFabr. -No: 177471 Year 1981Technical specifications:Basket diameter: 785 mmusable height: 630 mmBasket load capacity: 500 kgContainer capacity: 130 lPower of the pump: 2.0 kWHeating power: 6,0 kWPower connection: 380 V / 50 HzWeight approx: 250 kgWith- mobile- Heater- powered basket- Nozzles from above and from the sideusedPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Compressor unit on base plate make KAESER type 3300-GFabr. -No: 55585 built in 1980Technical specifications:Stroke volume flow 3300 l / mineffective delivery 2300 l / minpermissible operating pressure 10 barCompressor speed 1220 rpm.Power requirement 18.5 kWExternal dimensions 1600 x 830 x 870 mmAggregate weight 490 kgWe need space!Special price ex warehouse MörsdorfPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Refrigeration dryer make KAESER type TA 5Machine -No: 1.7917.0 Machine -No: 05527 Year 1995Volume flow: 0.55 m³ / hPressure loss: 0.05 barMax. Operating pressure: 16 bareffective power consumption: 0.28 kWRefrigerant: R 22Quantity: 0.320 kgOperating pressure: 25/16 barPower connection: 220 V / 50 HzOutside dimensions approx: 490 x 630 x 742 mmWeight approx: 80 kgused, in very good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Double piston Compressors Aggregate make BLITZ type GE 550Fabr.-Nr. 78524 year 1993Intake volume: 620 l / mineffective delivery: 550 l / minMax. Printing capacity: 10 barDrive power: 3 kWDimensions L x W x H: 1050 x 400 x 500 mmused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Brush deburring machine, make RSA, type Rasamax MonoMasch. -No: R-M-38/3305 built in 2000Technical specifications:Material thickness from: 1 - 6 mmSheet thickness: up to 6 mmSheet width: 100 to 1,000 mmSheet length: 100 to 1,000 mmSheet shape: sheets with notches, straight cut sheetsMaterials: steel, stainless steel, NEMax. Brush diameter: 250 mmBrush speed: 1500/3000 rpm.Drive power: 1.0 / 1.4 kWPower connection: 380 V, 50 HzDimensions with base: 400 x 500 x 1300 mmWeight approx: 50 kgWith- Base cabinetused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

2-cylinder piston compressor make FLACO type VKAZ 1700 GMasch. -No: 30360000/5700 built in 1997Intake volume: 1718 l / min.effective delivery rate: 1326 l / min.Compressor speed: 950 rpm.Max. Printing capacity: 15 barDrive power: 11 kWExternal dimensions approx: 1400 x 700 x 1000 mmWith- built on base plate- without boilerused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Deburring machine make RSA type Turnamat 2Machine -No: 48-1047 / 96 built in 1996Technical specifications:Workpiece cross-sections: 10 x 10 to 150 x 150 mm2 brush speeds: 1500/3000 rpm.Deburring time: 1 - 5 sec.Drive power: 3.5 / 4.6 kWsuitable for- Steel, VA, aluminum, copper and brass- Deburring by rotating the brush at high speed- Service rotation = circling the brush around the axis of rotation, i.e. continuous change of working direction at low speedused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Piston compressor make Harzer Kompressorenwerke type AHS 1-40 / 70 VFabr. -No: 501530 Year 1980Power: 1.2 MPa ÜPower: 10 m3 / hEngine power: 2.29 kWWeight approx: 95 kgWith:- Unit built on a horizontal boilerused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Deburring machine make RSA type Turnamat 2Machine -No: 048-028908 built in 2008Technical specifications:Workpiece cross-sections: 10 x 10 to 150 x 150 mm2 brush speeds: 1500/3000 rpm.Deburring time: 1 - 5 sec.Drive power: 3.5 / 4.6 kWDimensions approx .: 1200 x 1200 x 1800 mmWeight about: 550 kgsuitable for- Steel, VA, aluminum, copper and brass- Deburring by rotating the brush at high speed- Service rotation = circling the brush around the axis of rotation,i.e. continuous change of working direction at low speedused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Compact compressor make SCHNEIDER type 100 KITTMachine -No: 382 built in 1993Technical specifications:maximum pressure: 15 barSuction capacity: 85 l / min.Filling capacity: 49 lDrive power: 0.55 kWSpeed: 1415 rpm.Tank volume: 2.7LExternal dimensions approx.: 530 x 350 x 2400 mmWeight approx.: 21 kgPower connection: 220 V / 50 Hzused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Tooth edge deburring machine make RAUSCH type GRATOMAT GR 300 HV - HORI - FBMachine -No: 4337, built in 1998milling unit:- Hydropneumatic, retracting with additional pneumatic slidexa0xa0 (110 mm quick-stroke, 50 mm working stroke)Druckluftfrässpindel:- 950 mm rpm- right or left rotationBrush unit:- Retracting hydropneumatically- stroke 0 - 100 mm- 1.1 kW- 2800 rpm- Collet diameter 12 mmClamping unit:- Pneumatic three-jaw chuck SCHUNK diameter 160 mm- Possible use for bevel gear pinion shafts with number of teeth 7 - 11xa0xa0 for top or foot machining in full-stroke modeAir consumption: 600 l / minCurrent type: 400 V / 50 HzTotal power requirement: 5 kWSpace required: 3900 x 2900 x 2600 mmDimensions (LxWxH) approx: 2600 x 1800 x 2400 mmWeight approx: 1880 kgWith- CE marking- Fully automatic brush adjustment- full protection cabinused, in good conditionPrice on request.Delivery: ex wareh ...

Screw Compressor make ECOAIR type STKL 25 B 15Machine. -No: 20242072 year of construction 1990Suction volume: 2000 m³ / hMax. Printing capacity: 10 bareffective delivery: 8465 l / hDrive power: 15 kWDimensions L x W x H: 680 x 1120 x 1060 mmOperating hours: 11740 hoursused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Sheet metal deburring machine make AMADA type DB 610Machine -No: 61000917 built in 1989Technical specifications:Sheet thickness: 0.5 - 6 mmSheet width: max. 610 mmSanding roll dimensions: 630 x 200 mm2 grinding roller speeds: 1270 + 2030 rpm.2 cutting speeds: 18 + 13 m / sec.Passage speed: 2 m / min.Working table height: 780 mmDrive power: 3.7 kWOscillation drive: 0.4 kWConveyor belt drive: 0.2 kWWeight approx: 800 kgExternal dimensions approx .: 1660 x 1700 x 1400 mmused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Screw compressor make BOGE type VLEA 30 R 12Machine -No: 13535 built in 1991Volume flow: 4.9 m³ / min.Max. Compressor pressure: 8.0 barEngine speed: 4960 rpm.Drive power: 30 kWHours: 40,842Outside dimensions approx: 900 x 1400 x 1450 mmused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Finishing machine / trough vibrator make WALTHER TROWAL type TA 1/33050307, built in 1961, rectangular shapeTechnical specifications:Internal dimensions L x W x D: 880 x 550 x 680 mmFilling weight approx .: 330 lSpeed range: 1000 - 1900 rpm.- adjustment via handwheelDrive power: 11 kWExternal dimensions L x W x H: 2600 x 1250 x 1750 mmWeight approx: 2255 kgwith- Rubber coating of the built-up container so far obviously okay- Whetstones in the container- Electric switch box on the machineused, despite the year of construction in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Screw compressor make ATLAS COPCO type GA 310 PACKSer. -No: ABP718625Technical specifications:Output: 4.3 m3 / minMax. Performance: 10 barSpeed: 2925 rpm.Power: 30 kWWith- water separator- Flair / Delair DDA 24 dryer- Running time 44711 hoursused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Motorized beading machine make STÜCKMANN & HILLEN type 462.12Machine -No: RM9211102, built in 2002Roller center distance: 50 mmlargest working depth: 200 mmMax. Sheet thickness: 1.25 mm2 speeds: 4 + 8 m / min.Drive power: 0.6 / 0.75 kWStrim connection: 380 V / 50 HzWeight: 70 kgExternal dimensions: 900 x 220 x 380 mmWith- Geared motor 2 speeds- Footswitch- 1 set of bead rollersused, in very good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Screw compressor make MANNESMANN-DEMAG type RA-110Fabr. -No: 349008/272 built in 1996Technical specifications:Output: 11.3 m³ / min.Speed: 3000 rpm.Installed engine power: 75 kWWeight approx: 1280 kgWith- CE markused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Universal crimping system for tank bottoms or container bottoms of all kindsFabr. ECKOLD type BA 75, year of construction 1976Max. Floor size: 4000 x 4000 mmMax. Material thickness aluminum: 5.0 mm: Steel: 4.0 mm: VA: 3.0 mmHorizontal reach: 2150 mmVertical projection: 1320 mmhydr. Cylinder stroke: 1000 mmMax. Pressure: 110 barMax. Compressive force: 55 kNDrive power: 7.5 kWOutside dimensions approx: 3030 x 1030 x 1410 mmWith- Swiveling extension arm 0 - 200 °- built-in hydraulic cylinder- Flare shape receiving head- turntable- Hydraulic unit- pneum. Lifting and balancing device (Conco-Balancier)- mobile crimping device and pressure tongs type B 75 - 50xa0xa0 Worker 7.5 Mpxa0xa0 Pressure 490 barxa0xa0 Horizontal reach 150 mmxa0xa0 Projection vertical 230 mmxa0xa0 Weight approx. 45 kgThe universal flaring system is suitable for flanging all common tank or container bottoms in round, oval ...

Channel folding machine make RAS type 22.81Mach. -No: 297/5, year of construction 11/1987for producing longitudinal folds on the edges of rectangular and square air ductsTechnical specifications:Sheet thickness max .: 1.0 mmsmallest duct cross-sectionfor sheet metal thicknesses of 0.5 mm to 0.63 mm: 80 x 80 mmfor sheet metal thicknesses of 0.5 mm to 1.0 mm: 100 x 100 mmwith guide carriage: 160 x 160 mmPassage speed about 15 m / minDrive power: 2.2 kWDimensions approx: 6385 x 495 x 1100 mmWeight approx: 650 kgWith- Guardrailsused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Brush Deburring Machine Fabr. RSA Type STL IIIMachine -No: BIII 3-7262, built in 1986for pipes, profiles, solid material and sheetsWorkpiece diameter: UnlimitedBrush diameter: 250 mmBrush width: 60 mmOperating and protection: S 6-60% IP 44elec. Connection: 380VConnected load: 2/3 kWSpeeds by pole-changing motor Engine: 1500/3000 rpm.External dimensions: 650 x 450 x 1150 mmWeight approx: 75 kgused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Brush deburring machine make RSA type ST-No: RG II 48-1902, year of construction 1991for pipes, profiles, solid material and sheetsTechnical specifications:Workpiece diameter: unlimitedBrush diameter: 250 mmBrush width: 60 mm2 speeds thanks to pole-changing motor: 1500/3000 rpm.electr. Connection: 380 V, 2/3 kWSpace requirement: 500 x 650 x 1200 mmWeight approx: 83 kgColor greenWith- base- brushused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Brush deburring machine make RAIMANN type USM 58Machine -No: 219361 Ser. -No: 1068 built in 1989Technical specifications:Brush diameter: 300mmBrush Width: 110mmDrive power: 2.2 kWPower connection: 380V, 50HzDimensions L x W x H: 750 x 600 x 1100 mmApprox. weight: 80 kgwith- Table axially adjustable in height and angleused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Folding former make RAS type 22.15Masch. -No: 35/3 built in 1971Profile height max.: 20 mmMaximum bandwidth: 60 mmNumber of reel stations: 7Sheet thickness at 400 N / mm2 max.: 1.25 mmWorking speed approx: 14 m / minPower requirement: 2.2 kWOperating voltage: 400 V, 50 Hz, 3 Ph.Dimensions approx: 1670 x 480 x 1005 mmWeight approx: 326 kgWith- Rollers for Pitsburghfold 1mm- Sliding fold 0,5 - 1,5 mm width 29 mm- 7 pairs of rollsused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Brush deburring machine make RSA type STLMachine -No: RG III 071628 built in 1990for pipes, profiles, solid material and sheet metalTechnical specifications:Workpiece diameter: unlimitedBrush diameter: 250 mmBrush width: 60 mm2 speeds through pole-changing motor: 1500/3000 rpm.electr. Connection: 380 V, 2/3 kWSpace requirement: 500 x 650 x 1200 mmWeight approx: 83 kgwith- several new replacement wire brushesusedPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Deburring faceting machine make ROLEI type EF 165Mash. -No: 9106005/914Table size: 320 x 120 mminfinitely adjustable facet width: 0 - 10 mmSpeed: 2800 rpm.Drive power: 0.37 kWOutside dimensions approx: 300x350x300 mmPower connection: 380 V / 50 HzWeight approx: 18 kgused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Universal folder former make RAS type 22.15Fabr. -No: 155/6 year 1982Profile height max.: 20 mmMaximum bandwidth: 60 mmNumber of reel stations: 7Sheet thickness at 400 N / mm2 max.: 0.5 - 1.25 mmSheet length: 300 mm - optionalWorking speed approx: 14 - 17 m / minPower requirement: 2.2 kWOperating voltage: 400 V, 50 Hz, 3 Ph.Dimensions approx: 1670 x 480 x 1005 mmWeight approx: 326 kgWith- Snap- Cam standing seamused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Vibratory grinding bell (scouring drum) make Spaleck type PC 10Machine -No: 34425 built in 1974Technical specifications:Filling weight: 1000 kgDrive power: 4.75 kWExternal dimensions: 2500 x 1000 x 1600 mmused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

CNC profiling and cut-to-length line make RAS type 29.17 line 2005serial no. 10/1, year of construction 2001consisting of:a)Sheet metal/strip straightening machine RAS type 26.45, built in 2001Sheet thickness (galvanized sheet steel up to 400N/mm2): 0.5 - 1.25 mmBelt width: 500 - 1500 mmStraightening speed: 0.9 - 15 m/min.Number of straightening rollers: 6 piecesNumber of take-off rollers: 4.8 kWWeight approx.: 2.1 twith movable control panelb)Roll feeder RASBelt width :500 - 1500 mmMax. feed length: 9999.99 mmFeed accuracy per 1000 mm: 0.2 mmDrive power: 1.8 kWWeight approx.: 1250 kgwith curved infeed roller conveyorc)Cut-to-length guillotine shears RAS type 82.16, built in 2001Max. cutting length: 1640 mmMax. sheet thickness: 2.0 mmCutting angle: 1.36°Strokes per minute: 63Stand projection: 100 mmsmallest remaining strip: 35 mmTable height: 750 mmDrive power: 3.0 kWWeight approx.: 950 ...

Z-profiling machine make probably SCHECHTL / HEIDT type SZP 250Technical specifications:Working width: 2500 mmSheet thickness St.:0.5 - 1.5 mmSheet thickness VA:0.4 - 1.0 mmSheet thickness aluminium: 0.4 - 1.0 mmRoller distance: 160 mmNumber of profile rollers:15Profiling height: 3 - 7 mmThroughput speed: 20 m/min.Drive power: 2.0 kWWorking height: 890 mmApprox. weight: 880 kgExternal dimensions approx.: 3200 x 1040 x 1290 mmwith- Forward and reverse switch- support table- foot switchused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Mot. Beading machine make RAS type 12.30Masch. -No: 246/9 built in 1973Roller center distance: 68 mmMax. Sheet thickness at 40 kg strength: 1.75 mmMax. working depth: 250 mmWorking speed: 8.8 m / minDrive power: 0.55 kWDimensions L x W x H: 520 x 700 x 1350 mmWeight approx: 200 kgWith- pneum. Delivery of the harmonic- Footswitchused, ready for operationPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Electronic Scissor Lift Fabr. TREPEL Type M-Boy 4Machine -No: 30706872, built in 1985Load capacity: 500 kgOperating pressure max.:160 barTable size: 710 x 600 mmHeight retracted: 470 mmMax. Extension height: 920 mmOperating pressure: 160 barDrive power: 1.1 kWExternal dimensions retracted: 650 x 900 x 470 mmPower connection: 380 V / 50 HzWith- Remote control with 3.0 m cable- freely installable limit switchvery little used, in very good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Beading machine make RAS type 110 MMachine -No: 69/6 built in 1956Technical specifications:Max. sheet thickness: 1.75 mmmaximum projection: 250 mmDrive power: 0.75 kWWith- foot pedalusedPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Wide belt sanding, brush deburring and grinding machine make GRINDINGMASTERType MCSB / B2 1300 make -No: TN 1431-04 built in 1991Working width: 1300 mmBrush size: 1300 x 300 mmSanding belt size: 1900 x 330 mmMax. Material thickness: 150 mmPower of the contact roller: 16 kWPower of the stainless steel brushes with oscillating oscillation: 15 kWPerformance of the stainless steel brushes Mit- u. Counter-oscillation: 15 kWContinuous flow rate: 3 - 18 m / minAir requirement: 70 l / min / 6barDimensions L x W x H approx .: 2200 x 3000 x 2200 mmWeight approx. 2500 kgWith- 3 deburring stations- wet execution- Dryer- FilterfliesanlageusedPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. W ...

Motorized beading machine make GEKATechnical specifications:Roller center distance: 65 mmProjection: 265 mmSheet thickness approx: 1.25 mmExternal dimensions L x W x H: 450 x 600 x 1100 mmMotor power: 0.22 / 0.4 kWMotor speeds: 63/125 rpmWith- Double foot switch- underframe- 1 pair of rollersused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Vertical wet belt grinding machine make MAFAC type V 100Masch. -No: 88174543 Year 1988Sanding belt dimensions: 20-100 x 3500 mmStand projection: 500 mmTable size: 650 x 650 mmWidth of the contact surface: 100 mmBelt speed through polswitchable motor: 12.5 m / sAir pressure: 5-6 barOscillation approx: 0 mmDrive motor 380 V: 21 kWWeight: 430 kgSpace required: 840 x 1180 x 1760 mmwith saucer approx: 2050 mm highWith- Compl. electr. Facility- belt oscillation- pneum. belt tension- Belt filter automat- sep. control cabinet:used, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools