kw used for sale

Electric Hardening Furnace Fabr. PEDE Type M 3 / SFabr. -No: 1075 Com. -No: 5875 Year 1987Max. Temperature: 1200 °Internal dimensions approx: 280 x 200 x 700 mmOutside dimensions approx: 980 x 1100 x 970 mmElectricity requirement: 13 kWPower connection: 380 V / 50 HzWith- Timerused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

CNC press brake make LOTZE type PZ 150Machine -No: 20327455 built in 1982 only 3200 operating hoursTechnical specifications:max.pressing force: 150 tmax.working length: 4500 mmTable width: 350 mmStand passage: 4000 mmInstallation height: 500 mmThroat: 200 mmTable height: 900 mmOpening width: 490 mmTable under the floor: 580 mmmot.backgauge: 5 - 1000 mmDownward speed idle max .: 100 mm / IUpward speed: 68.2 mm / lPress speed: 7.5 mm / lDrive power: 12.5 kWDimensions: 5400 x 2000 x 3500 mmWeight approx: 16000 kgwith- CNC control Cybelec DNC 70 (faulty) Control was retrofitted or converted in 1993- Universal die 90 x 90 divided, 4000 mm long- divided deer foot tool 4000 mm long, height 165 mm- Foot switch with two-hand release- Floor machineused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data ...

Hydraulic press brake make HM type JONO 20.075Machine -No: 1143, built in 2002Press force: 75 tWorking length: 2000 mmStop length: 180 mmWorking speed / down: 10 mm / sWorking speed / high: 19 mm / sHydraulic motor: 11 kWSupply voltage: 3x400 VAC / 50 Hz + N + PEControl voltage: 24 VAC + 24 VDCMax. Pressure: 180 barOil quantity: 125 lWeight: 5.5 tExternal dimensions: 2340 x 2205 x 1965 mmWith- Control SIEMENS SIMATEC OP 7xa0xa0xa0 for X + Y- shared reef foot tool- Univ. die- Footswitchused, in very good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Zinc melting furnace RAUCH ZSO 450 BMasch. -No: 70112/836597 Year of construction 1997Technical specifications:Max. Temperature: 450 degreeHeating output: 96 kWWeight approx: 1300 kgWith- 1 control cabinet- ZFB conveyor belt including drop chuteusedPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

CNC press brake make BEYELER type MZ 30 / 1550Machine -No: 59009 / 2817 built in 1990Technical specifications:Press force: 30 tBending length: 1550 mmDistance between columns: 1400 mmTable width: 80 mmStand projection: 205 mmInstallation height: 340 mmTable height: 890 mmInfeed speed: 130 mm/sec.Working speed: 11 mm/sec.Stroke:140mmDimensions L x W x H: 2150 x 1250 x 1750 mmTotal power requirement: 3.0 kWWeight approx.: 1.7 tWith- Defective control Euro II- cpl. upper and lower toolused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Hardening furnace make NABER type 8 / LFabr. -No: 62604 built in 1984Technical specifications:Max. Temperature: 1260 ° CInternal dimensions approx. W x D x H: 700 x 900 x 1200 mmDrive power: 27 kWWith- Controller C8usedPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Hydraulic press brake make EHT type APN 80Machine -No: 20377, built in 1970Max. Pressing pressure: 80 tTable length: 3550 mmTool length: 3550 mmDistance between the stands: 3050 mmStand projection: 250 mmRam stroke hydraulic: 100 mmPush stroke mechanical: 80 mmDrive power of the high-pressure pump: 11 kWDrive power of the gear motor: 0.75 kWPressure in the retraction system: 120 - 150 atüNitrogen loading in the accumulator: 80 atmContent of accumulator: 10 lContent of the oil tank: 280 lOil quality Hydraulic oil: 3 ° E at 50 ° COperating voltage three-phase: 380 volts, 50 HzControl voltage: 220 voltsDrive power: 12 kWWeight approx: 9550 kgExternal dimensions: 3565 x 1680 x 2700 mmusedPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer ...

Electric annealing furnace make NOLZEN type WS 20/19/45Machine -No: 3191 built in 1972Technical specifications:max.temperature: 650 °Internal dimensions: 200 x 190 x 500 mmElectrical consumption: 3.6 kWPower connection: 380 V / 50 HzExternal dimensions approx .: 600 x 700 x 1200 mmWith- Temperature display / timerused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Punching machine make RASTER type HR 15/300 SL-4 SMachine -No: 101985 built in 1985Technical specifications:Punching force: 15 tCutting capacity at 40 kg: 375 mm²Smallest/largest table-ram distance: 245 / 275 mmSmallest/largest distance table-ram guide: 135 / 165 mmClamping table area: 500 x 500 mmDrop Hole: 350100mmRam area: 490 x 200 mmRam stroke small/large: 10 - 30 mmMax. ejector travel: 20 mmmax. ram adjustment: 50 mmNumber of connecting rods: 1Number of strokes of the machine: 200 - 2000 strokes/minDrive power: 10 kWMachine dimensions approx.: 1800 x 1800 x 2400 mmDimensions of control cabinet approx.: 1200 x 1000 x 1800 mmDimensions reel approx.: 1200 x 800 x 1600 mm:Weight machine approx.: 3000 kgWeight control cabinet approx.: 280 kgwith- separate control cabinet- Control panel- various toolsused, in good conditionPrice on request.Delivery: ex warehouse or location free loading ...

Electric annealing furnace make NOLZEN type WL 20/19/50Machine -No: 3241Technical specifications:max.temperature: 1150 °Internal dimensions W x H x D: 210 x 190 x 500 mm:Electrical consumption: 9.5 kWPower connection: 380 V / 50 HzExternal dimensions approx. 1050 x 610 x 1630 mmWith- underframe- temperature displayusedPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Eccentric press make RUHRMANN type ASR 45Ser. -No: 14326 Year 1996Press force: 45 tRam adjustment: 100 mmadjustable stroke: 20 - 200 mmPusher strokes: 40 - 160 per minuteTable size: 900 x 800 mmPlunger surface: 600 x 400 mmlargest distance table - ram: 800 mmInstallation height: 790 mmDiarrhea hole: 400 x 600 mmMax. Tool weight: 500 kgMotor power: 7.5 kWWeight approx: 7800 kgExternal dimensions approx: 1400 x 1600 x 3100 mmWith- Control Siemens Simatic OP 7- transverse shaft- swiveling control panel- Electric control cabinetused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Electrode heater make KÜPPERSBUSCH type SET 10Machine -No: 1937 built in 1980Technical specifications:Internal dimensions approx: 230 x 250 x 470 mmControl voltage: 220 VPower: 2.0 kWExternal dimensions approx .: 410 x 370 x 690 mmusedPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Eccentric press fabr. HELMERDING type PEP 12/15 BMasch. -No: 831184, year of construction 1988Technical specifications:Nominal force: 12 tMax. Ram stroke: 60 mmThroat: 160 mmTable surface area: 315 x 400 mmAdjustment of the ram: 40 mmMax. Strokes: 180 rpm.Ram area: 100 x 125 mmDrive power: 1.1 kWWith- 2 hand release- foot switch- separate control cabinet- Ortlinghaus additional brake and hydr. Multi-plate clutch- according to UVVused in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Bar loader make Fabr. IEMCA type AS 325/32Machine -No: 87041309 Year 1987Rod sizes from: 3-25 mmBar length max .: 3210 mmMagazine capacity (eg 30 x 10 mm): 300 mmFeed rate: 200-600 mm / sec.Drive power: 1.0 kWWeight approx: 530 kgOutside dimensions approx: 4470 x 460 x 1500 mmused, in very good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Eccentric press MABU type 12 TFprobably built in 1984Technical specifications:Pressing force: 12 tStroke adjustment: 6 - 60 mmTable size: 380 x 270 mmDiarrhea: 100 mmBear size: 120 x 100 mmInstallation height: 210 mmThroat: 145 mmDrive power: 1.1 kWExternal dimensions approx: 800 x 900 x 1750 mmWith- pneum. Friction clutch Control BA 1.1 for with / without movable protection Movable security not available!- height adjustable table- foot switch- stroke counterused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Engine with flexible shaft make SUHNER type Rotofero DKM4Mash. -No: 2409677 speeds: 850 - 12000 rpm.Drive power: 0.73 kWPower connection: 380 V / 50 HzWith- fixed base- flexible shaft 1500 mmused, in very good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Eccentric press make HEILBRONN type EPT 6Fabr. -No: 4869, built in 1986Technical specifications:Pressure force: 6.3 tThroat: 130 mmTable size: 320 x 240 mmThrough hole in the table: 80 mmTable height: 800 mmMax. Installation height: 155 mmRam surface: 128 x 180 mmSlide adjustment: 30 mmStroke adjustment: 6 - 60 mmStroke rate: 180 H / minDrive power: 0.5 kWDimensions approx: 1000 x 1000 x 1800 mm mmWeight about: 500 kgWith- flywheel drive- Two-handed disengagement- Manual inlays 11062/11064- foot switch- Two-hand and single stroke- separate control cabinetused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Pre-assembly device make VOSS type P 70Best. -No: 991070 Machine -No: 170 Year Nov. 1989for pre-assembly of cutting rings on pipes from AD 6 - 42 mmand for mechanical pre-assembly of the flared cone and collar ringsPipe size to be machined: 6 - 42 mmMax. Pressure capacity up to: 250 barDrive power: 0.3 kWPower connection: 220 V, 50 HzDimensions L x W x H: 500 x 550 x 210 mmWeight approx: 65 kgWith- Underframe- various accessoriesused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Hydr. Furnace pipe pulling machine make SCHNEIDERYear of construction 1994Working range: 60 - 220 mmWorking stroke: 120 mmElectricity requirement: 0.75 kWDisplacement of the tube counterholder: 750 mmPower connection: 380 V / 50 HzOutside dimensions approx: 2000 x 750 x 1570 mmWith- 14 pulling tools: 60; 70; 80; 90; 95; 100; 120xa0xa0 130; 140; 150; 170; 180; 200; 220 mm- Manual operation- Automatic mode- Two-hand releaseused, in very good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Eccentric press make MÜLLER type ExP 60 SV/HKMachine -No: 6030790Technical specifications:Max. pressing force: 60 tProjection: 280 mmInstallation height: 360 mmTable surface: 750 x 560 mmDrop Hole: 300200mmTable adjustable: 160 mmRam area: 380 x 200 mmPlunger adjustability: 60 mmRam strokes per minute: 110Plunger adjustable: 10 - 90 mmMotor power: 4.0 kWWeight approx.: 3950 kgwith- Control SIEMENS Simatic OK 27- hydraulic clutch- adjustable table- Two-hand disengagement- straightening unit- Roller feed- Safety device according to UVVused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Motor with 2 flexible shafts make BIAX type MBPMash. -No: 8/1113/39Engine speed: 900/2200 /: 4600/9000 rpm.Drive power: 0.55 kWWith- 2 flexible waves- Underframeused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Hydraulic drawing press make CAME Panasonic Matsushita type THB 120 x 100Model no 1882 year of construction 1996Max. Press force: 125 tRetraction force: 20 tCompressive force of the die cushion: 70 tRetraction force of the die cushion: 37 tOil pressure of the press: 210 barOil pressure of the die cushion: 140 barTable size: 1300 x 1000 mmPassage: 1600 x 1200 mmInstallation height: 1300 mmRam stroke: 900 mmOil filling: 1300 lRapid traverse from max.: 300 mm / sCylinder diameter: 224 mm + 2 x 112/80Cylinder Tissue Diameter: 310/180/310/250 mmWeight of the upper tool max.:2300 kgDrive power: 45 kWDrive Power Cushion: 22 kWDimensions L x W x H approx .: 4,000 x 3350 x 5400 mmWeight approx. 31 tWith- heated intermediate plate- Holding device- Photocell manufacturer SICK- Two-hand operation- UVV regulations according to 89/392 EEC- CE clampprevious use:Deep drawing of slit masks for the pictur ...

Hammering and reducing machine make KROLLMANN type HM-0V / 2RMachine -No: 80-8620 Year 1980Solid material: 6.0 mmPipes: 15 mmTool length: 45/60 mmEngine power: 3.0 kWWith- 2 rotating toolsused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Hydr. Double Column Press Fabr. KINDSMÜLLER Type KP 50 EMachine -No: 355, built in 1972Printing capacity max.:50 tStroke of the pistons: 400 mmRam speed before: 40 mm / secRam speed back: 85 mm / secPiston diameter: 120 mmTable size: 635 x 455 mmPassage between the uprights: 750 mmInstallation height: 740 mmTank capacity: 150 lDrive power: 4 kWExternal dimensions: 1200 x 1100 x 2400 mmWith- Two-hand releaseused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Aluflex tube making machine make AEROTECHNIK type MFR 500Fabr. -No: 2/6275630 Year 1992possible pipe dimension: each diameterpossible lengths: infiniteThickness of the metal foil: 0.08 mmDIN designation of the produced pipe: 24146Drive power: 1.1 kWDimensions L x W x H approx: 1200 x 1000 x 1300 mmWith- pre-coiled aluminum tape until Drm. 500 mm- also for VA and Alu- flexible aluminum tubeused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Pipe expanding machine make UNKNOWNPipe size up to: 155 mmNumber of pipe jaws: 6Size of the segments: 113/125/130/135/140/155 mmPipe length max .: 1000 mmDrive power: 1.4 kWOutside dimensions approx: 600 x 2200 x 1000 mmusedPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Hydraulic single column press make HENSELER type PYE 6,3 x 200 SMachine -No: 136 built in 1969Compressive force: 6.3 tPressure force on: 3.5 tRam speed from: 120 mm / sec.Ram speed to: 220 mm / sec.Projection: 200 mmStroke: 315 mmPiston diameter: 80 mmInstallation height: 500 mmTable height: 800 mmTable surface: 380 x 420 mmTable hole: 100 mmPusher bore: 32 x 60 mmOil filling: 120 lOutside dimensions approx: 650 x 1100 x 2100 mmDrive power: 4.0 kWWith- Two-hand release- Press time adjustment- Pressure control- Hand lever operation- pneumatic hold-down- Speed control by hand lever in setup modeused, despite the year of construction in very good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your  ...

Cutting Mill Fabr. TRIA Type 32/20 JMYear 2005Technical specifications:Milling chamber opening: 320 x 200 mmNumber of stator / rotor blades: 3/2Rotor diameter: 180 mmStandard sieve: 5.0 mmProduction capacity approx: 40 60 kg / hPower 400V: 3.0 kWRotor speed approx: 280 1 / min:Weight: 320 kgused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Hydraulic single column press make WMW ZEULENRODA type PYE 160 S 1Machine -No: 057-007 / 38 built in 1974Max. Press force: 160 tRetraction force: 34 tRam stroke: 500 mmProjection: 360 mmInstallation height: 800 mmSpeed from: 0.2 m / min.Speed at: 0.125 m / min.av. Working speed: 92 mm / sSpeed at: 125 mm / sTable size: 900 x 630 mmBear area: 750 x 450 mmTable height: 800 mmOperating pressure: 160 kp / cm³Connected load: 17 kWDimensions L x W x H: 1250 x 2200 x 3650 mmWeight approx: 7 tWith- stroke limitation- Two-hand releaseused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Cutting Mill Fabr. TRIA Type 32/20 JMMachine -No: 83304602M Year 2005Technical specifications:Milling chamber opening: 320 x 200 mmNumber of stator / rotor blades: 3/2Rotor diameter: 180 mmStandard sieve: 5.0 mmProduction capacity approx: 40 60 kg / hPower 400V: 3.0 kWRotor speed approx: 280 1 / minWeight approx: 320 kgused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Hydr. High-speed single-column press Fabr. DUNKES type HZS 40Machine -No: H 77-581, built in 1981Press force: 40 tOperating pressure: 270 barStroke: 150 mmInstallation height: 400 mmOutreach: 280 mmRapid traverse: 400 mm / sec.Rapid traverse to: 400 mm / sec.Pressing under full load: 14 mm / sec.Table height: 820 mmTable surface: 600 x 515 mmDiarrhea hole in the table: 100 mm Drm.Drive power: 7.5 kWWeight: 3.1 tOil filling: 230 lExternal dimensions: 850 x 1200 x 2390 mmWith- Cutting impact damping- Safety 2-hand control- self-holding with rapid traverse shutdown- Electric return stroke limitation- Setup tip circuit- Fully automatic workflow- Emergency stop switch- stepless force preselection- graduated Adj. mech. depth stop- Switching in the lower stroke rangexa0xa0xa0 Lift and time changeoverxa0xa0xa0 Lift and pressure changeover- separate hydraulics for drawing cushionsused, in good co ...

Small cutting mill make DREHER type S 15/20 LFabr. -No: K11776 built in 2004Rotor diameter 150 mmWorking width 200 mmRotor cutting bars 3Statorschneidleisten 2Insertion opening H x W 300 x 200 mmPower at 10 mm sieve 50 kg / h.Motor power 2.2 kWWeight approx. 230 kgWith- CE marking- electrical safety interlockused, in very good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Hydraulic toggle quick spindle striking press make HILU HILLER & LUTZType KNP 100 C machine -No: 1712 built in 1988Press force: 100 tWork distance from UT: 8 mmStrokes per minute: 70Ram stroke max.:0 - 120 mmRam adjustment: 80 mmInstallation height: 480 mmDischarge: 450 mmTable surface: 800 x 810 mmPlunger surface: 700 x 400 mmDiarrhea opening in the table: 200 mmAnvil plate: 200 x 50 mmDrive power: 18.5 kWDimensions L x W x H approx: 1200 x 1800 x 3000 mmWith- UV for manual inlay work- Footswitchvery little used, in very good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Generators Fabr. KNURZ Type (D + E) 5BSAFMachine -No: 5698 Year 08/1990Engine power: 6.2 kWEngine Type: gasoline engineNumber of cylinders: 1Working method: two-stroke / OttoFuel: mixture / 2-stroke 25Speed: 3000 rpm.Generator power: 4.0 kWVoltage: 400V / 3 / 230VWeight approx: 114 kgExternal dimensions approx: 800 x 500 x 600 mmWith- 3 junction boxes 220 V- 1 connection box 380 Vused, very little usedPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Tumbling riveting machine make THIELICKE type WN 4Machine -No: 7291Max. Stroke: 40 mmCompressive force at 6 bar: 4 kNAir consumed up to 10 mm stroke: 0.4 lTable size: 175 x 245 mmDischarge: 160 mmMotor power: 0.55 kWDimensions L x W x H: 500 x 270 x 820 mmused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Hydraulic straightening press make MAE type S 16 RHTechnical specifications:Press force: 16 tRetraction force: 57.7 kNWorking pressure: 204 barRam speed, down: 25 mm/sRam speed, up: 68 mm/sStroke: 200mmInstallation height: 550 mmProjection: 190 mmTable depth: 320 mmTable width: 480 mmTable height: 750 mmTank volume: 120 lPump flow rate: 11.6 l (min.Tappet bore: 32mmDrive power: 5.5 kWExternal dimensions L x W x H: 1400 x 700 x 2070 mmweight approx.used, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Wobble riveting machine make THIELECKE type WN 4Mash. -No: 144369Technical specifications:Max. Stroke 40 mmCompressive force at 6 bar 4 kNAir consumed up to 10 mm stroke 0.4 lTable size 175 x 245 mmDischarge 160 mmMotor power 0.55 kWDimensions L x W x H 500 x 270 x 820 mmused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

horizontal hydraulic straightening and bending press make KUNKEL type P 32Year of construction 1993Technical specifications:Maximum working pressure: 32 tinfinitely variable from: 0 - 32 tStroke of the pressure tools: 200 mmClear width pressure tool - anvil: 300 mmCasters:4including 2 rollers on extendable barswith outer distance: 3000 mmExternal dimensions approx. H x W x D: 1160 x 1200 x 1400 mmDrive power: 5.5 kWPump capacity: 280 kg/cm2Weight approx.: 1400 kgused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Sheet metal straightening machine make SCHLEICHER type RMC 6-40-96 / 300Machine -No: 5185/1411, built in 1994Bandwidth: 50 - 300 mmSheet thickness: 0.4 - 0.5 mmDrive power: 1.7 kWWith- 3 pairs of straightening rollers- 1 pair of feed rollers- Loop control- Contact pressure of the feed rollers adjustable- Remote control for setup modeused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Straightening machine make SCHLEICHER type RML 6-53 / 96-300Machine -No: 3378/1135, built in 1985Bandwidth: up to 300 mmSheet thickness: 0.5 - 1.5 mmDrive power: 1.5 kWWith- 4 sets of straightening rollers- 1 feed roller- R + L run- Automatic / manual- Belt speed infinitely adjustableused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Hydraulic four-roll plate bending machine Fabr. Haeusler type VRM HY 2000-6Machine number: 1186-1968, built in 1968Max. Working width approx. 2040 mmMax. Druchgang approx: 2100 mmMax. Sheet thickness with bend: 6 mmUpper and lower roller diameter each approx: 250 mmSide roller diameter approx.: 200 mmStroke of rollers approx. Each: 220 mm2 working speedsTotal drive power approx: 18 KWWorking height approx: 1300 mmSpace required: L 5450 x D 1900 x H1930 mmWeight approx: 10500 kgWith:- Both side rollers with mot. delivery for bending + conical bending- hydr. Folding bearing for removing the sheet metal- Slip clutch- Right-left purchase- separate control panelused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are ...

Straightening machine make SCHLEICHER type RML 6-40-96-300Machine -No: 3668/1178, built in 1986Bandwidth: 50 - 300 mmSheet thickness: 0.4 - 1.5 mmDrive power: 1.5 kWused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Horizontal automatic band saw machine make RÜSCH type AS 300Sawing range up to: 310 mmor: 310 x 310 mmSection length min: 4 mmSection length max: 500 mmCutting speed: 20 - 70 m / min.infinitely adjustableCutting pressure: approx: 2 - 35 kg, infinitely adjustableSaw band dimensions: 4,150 x 27 x 0,9 mmDrive power: 3.0 kWWeight: approx: 1.300 kgFootprint L x W x H: 2000 x 2300 x 1500 mmWith- Pliers feedused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Rolling, feeding and straightening machine make SCHLEICHER type RMS 8 - 53/160 - 1050Year of construction 1985Bandwidth: 250 - 90 mmStrip thickness: 0.5 - 0.8 mmDrive power: 7.7 kWNumber of Straightening Rollers: 8Diameter of straightening rollers: 53 mmWith- loop controlused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

2-column CNC fully automatic bandsaw make MEBA type 430 AMachine -No: 6397 Year 1999Cutting area around 90 °: 430 mmxa0xa0xa0xa0xa0xa0xa0xa0xa0xa0xa0xa0xa0xa0xa0xa0xa0xa0xa0xa0xa0xa0xa 0xa0 flat 90 °: 430 x 430 mmCutting speed stepless: 18 - 95 m / minCutting pressure: 10 - 40 bar - stepless hydr.Saw band: 5800 x 41 x 1.3 mmSaw blade tensioning: hydraulicMaterial feed Single stroke: 0 - 600 mmxa0xa0xa0xa0xa0xa0xa0xa0xa0xa0xa0xa0xa0xa0xa0xa0xa0xa0xa0xa0xa0xa0xa 0xa0xa0xa0xa0xa0 Multiple stroke: 0 - 6000 mmRemaining length manual operation / automatic: 20/70 mmWorking height: 750 mmHydraulic unit: 35 - 40 lCoolant tank: approx. 120 lTotal power requirement: 7 kWDimensions approx: 3100 x 2500 x 2000 mmWeight approx: 3200 kgWith- Control SIEMENS COROS OP 15- hydraulic belt tension- stepless saw blade drive- hydr. Full stroke material tension in front of and behind thexa0xa0 Saw band with m ...

Continuous straightening machine make WEINGARTEN type RA 21Machine -No: 141240 built in 1973Technical specifications:Number of reels: 7Roller diameter: 40 mmstepless speed: 10Passage width: 240 mmDrive power: 1.5 kWused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Horizontal band saw machine make BEHRINGER type HBP 400 AMachine -No: 182171 built in 1982Technical specifications:Working area around: 400 mmSquare working area: 400 x 400 mmstepless cutting speed: 16 - 100 m / min.Material feed length: 800 mmSaw band dimensions: 5800 x 38 x 1.3 mmDrive motor: 5.5 kWTotal power: 7.5 kWWeight approx: 3200 kgDimensions approx: 3000 x 2450 x 1850 mm:with- chip conveyorused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Sheet straightening machine make ARKU type RM 3020 / 21.4Year of construction unfortunately not visible, nameplate not availableTechnical specifications:Sheet width: 200 mmMaterial thickness: 0.5 - 4.0 mmmin. Workpiece dimensions: 50 mmReading the machine setting: 0.01 mmMax. Vertical roller distance: 10 mmNumber of straightening rolls: 21Roll diameter: 30 mmApproximate speed: 3.5 - 20 m / min.Drive power: 4.0 kWExternal dimensions approx.: 1600 x 1500 x 1200 mmWeight approx .: 1284 kgWith- discharge chute- Infeed tableused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Straightening machine make DREHER type RIMA model 1675 BGLOrder -No: A07/395-90 Year 1991Technical specifications:max. belt width 300 mmMinimum belt width 50 mmTape Thickness 0.6 - 2.5mmMaterial strength 400 N/mmBelt speed 5 - 30 m/min.7 straightening rollers diameter 60 mm2 feed rollers diameter 60 mm2 outfeed rollers diameter 60 mmDrive power 5.5 kWDimensions approx. 1200 x 1000 x 1500 mmWith- 3 digital displays- Emergency stop switchused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Thread rolling machine make JW FRÖHLICH type GWZ 24/140Machine -No: 241401016 Year 1984Thread rolling performance: M8 - M24Shaft length: 230 mmNumber of cycles: 20 / min.Operating pressure: 130 barDrive power: 18.5 kWWith- FeedsusedPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools