kunz used for sale

Table clamping area: 350 x 700 mm x-path: 500 mm y-way: 320 mm z-way: 400 mm Spindle holder: SK 40 Spindle speeds: 30 - 2500 rpm Operating voltage: 380 V Total power requirement: 2.2 kW Space requirement: 1500 x 1500 x 1800 mm Weight: approx. 1700 kg

Manual tool change Tools with PU scraper Machine including a wide range of round, square, slotted hole and cutting tools including tool presetter the stop rails are manually adjusted and clamped on the table using a scale embedded in the table, the stroke is triggered by a foot pedal fully hydraulic Punching pressure: 200 kN Colour: grey/blue Total power requirement:16 A Projection: 450 mm Punching capacity max.: Punching diameter 105 mm Max. stroke length: 0 - 35 mm Working area: 450 x 800 mm Table size: 1300 x 650 mm Strokes per min.: 150 strokes/min Connected load: 6 kVA Motor power: 5.5 kW Dimensions: 1400 x 1300 x 1700 mm Weight: 2400 kg Machine Number: 69

Diesel combined heat and power plant, CHP, generator set, power generator used DIETER KUNZLER GmbH Generator K-EA-3ST-PAR-SYN-M 500 kVA 400/231 V Synchronous 3x 362 A 50 Hz Mtu 12 V 183 AA 31 MERCEDES OM 424 225 kW 1500 rpm Dimensions unit: approx. 2500 x 1200 x 1500 mm, control cabinet approx. 2400 x 500 x 2000 mm Changes and errors in the technical data, information and prices as well as prior sale reserved.

Cross support, cross support, cross table, cross-sliding table -Manufacturer: Kunzmann, top head from milling machine type UFV 600 -Dimensions: 530/420/H730 mm -Weight: 80 kg

Cross support, cross support, cross table, cross sliding table, cover plate -Manufacturer: Kunzmann, 2 pcs. Cover plates from milling machine type UFV 600 -Price/Sale: complete -Dimensions each: 263/161/H38 mm -Weight: 9.7 kg

Counter bearing, bearing block, pillow block, bearing for milling machine, upper support -Dovetail: 11 by 94 mm 16 mm high -Drawing: in the photos -Dimensions: 730/160/H110 mm -Weight: 28 kg

Diesel combined heat and power plant, CHP, generator set, power generator used DIETER KUNZLER GmbH Year: 1991 Generator 250DMED 250 kVA 400/231 V 3x 362 A 50 Hz Mtu 12 V 183 AA 31 MERCEDES OM 424 225 kW 1500 rpm Container dimensions: approx. 6000 x 2500 x 2500 mm Changes and errors in the technical data, information and prices as well as prior sale reserved.

This 5-axis KUNZMANN WF 650 5AX was manufactured in 2025. It features a maximum spindle speed of 12,000 rpm and a tool magazine capacity of 40 tools. The machine has an impressive X-axis travel of 650 mm, Y-axis travel of 500 mm, and Z-axis travel of 450 mm. If you are looking to get high-quality machining capabilities, consider the KUNZMANN WF 650 5AX vertical machining centre we have for sale. Contact us for further details.

x-travel: 600 mm y-travel: 400 mm z-travel: 400 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Heidenhain TNC 310 cnc control electronical hand wheel coolant device Technische Daten: Längsweg (X-Achse) / X-travel longitudinal 600 mm Querweg (Y-Achse) / Y-travel cross 400 mm Senkrechtweg (Z-Achse) / Z-travel vertical 400 mm Werkzeugaufnahme / spindle taper SK 40 Drehzahlbereich / spindle speed range 60-3700 UpM Vorschub / feed 0-2000 mm/min. Eilgang längs + quer / rapid feed x/y 5 m/min. Eilgang senkrecht / rapid feed z 4 m/min. Antriebsleistung gesamt / drice capacity 7 kW Gewicht ca. / weight ca. 2000 kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding. The data for this ad was created with ModulMWS - the softwa ...

Universal milling and drilling machine KUNZMANN WUF5/3 with Heidenhain ND 780 Built in 1989 in good condition. Technical data WUF5/3: Position indicator Heidenhain ND 780 The ND 780 position indicator is particularly suitable for use on milling, drilling and turning machines with up to three axes. Router table: Clamping surface 850x350 mm Clamping grooves 5 Groove width 14H7 mm Groove spacing 63 mm Workspace: Longitudinal (X-axis) 490 mm Transverse (Y-axis) 310 mm Vertical (Z-axis) 400 mm Max. distances: Top of the table up to Horizontal spindle centre 40 – 420 mm Top of the table up to Vertical head lower edge 350 mm Milling spindle: Tool holder SK40 Horizontal speeds 40 – 2500 min-1 Vertical speeds 40 – 2500 min-1 Quill stroke 60 mm Vertical head can be swivelled on both sides + - 90° Feed rate 1000 mm/min Rapid traverse 4000 mm/m ...

x-travel: 600 mm y-travel: 400 mm z-travel: 400 mm total power requirement: 7 kW weight of the machine ca.: 1.8 t required space: 2.3x2x2 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Universal tool milling machine KUNZMANN WF 4/3 With 3 axes Heidenhain digital display Year of construction: 1996 Travels: X 400 Y 320 Z 400 Speed range: 40 – 2550 rpm With the following accessories: Rigid angle table 800 mm x 360 mm clamping surface Mechanical handwheels for X, Y, Z axle Hydraulic tool clamping Automatic central lubrication pump for X, Y, Z axis Machine light 4-Piece Machine Shoes Coolant system Operating instructions THE MACHINE WAS ONLY USED FOR APPRENTICESHIP TRAINING THE MACHINE IS IN GOOD CONDITION

X-axis: 500 mm Y-axis: 400 mm Z-axis: 400 mm Table dimensions: 700 x 425 mm Spindle Exception: SK 40 Spindle speeds: 1 - 4000 rpm. Spindle stroke: 60 mm Equipped with: - ISO tool holders - Coolant system -Operating instructions Country of origin: Germany Motor power: 5 kW Machine LxWxH: 200 x 200 x 200 cm Machine weight: 2000 kg

surface area: 1200 x 600 ( x 500 ) mm no. of flutes: 9 groove width: 14 / x 62,5 mm total power requirement: 0 kW weight of the machine ca.: ? t Packing: Holzkiste 1400850700 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Table clamping surface: 750 x 450 mm Travel x/y/z: 600/400/600 mm Spindle mount: SK 40 ISA small/large distance table/spindle: 90/690 mm Spindle speeds: 50 - 8000 rpm Number of tool locations: 24 pieces electr. Connection: 380 V, approx. 15 kVA kW Space requirement: 2500 x 2500 x 2800 mm Weight: 3200 kg

surface area: 800 x 425 mm no. of flutes: 6 groove width: 14 mm table length: 800 mm table width: 425 mm table load: 0,3 t total power requirement: kW weight of the machine ca.: 0,34 t dimensions of the machine ca.: 0,80,60,6 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

This 3-axis KUNZMANN WF 4/3 was manufactured in 1998. It features a travel of 400 mm in the X, Y, and Z axes, with a table size of 650 x 350 mm and a maximum table load of 250 kg. The spindle speed reaches up to 2,500 rpm, providing efficient machining capabilities. If you are looking to get high-quality vertical machining capabilities, consider the KUNZMANN WF 4/3 vertical machining centre we have for sale. Contact us for further details.

Offer 24103 Specifications: - Working range of the axes - X / Y / Z 450 / 400 / 420 mm - Table size 850 x 250 mm - Max. distance from spindle to table 400 mm - Working spindle speeds horizontal 30 - 1275 rpm - Working spindle speeds vertical 66 - 2840 rpm - Feeds X – Y and Z axis - Rapid traverse - Drive 400 V / 3.2 kW - Space requirement approx. W 1400 x H 1800 x D 1400 mm - Weight approx. 1400 kg

Machine like new from the laboratory x-travel 400 mm y-travel 320 mm z-travel 400 mm Control Heidenhain TNC124 Table size 650 x 350 mm Tool holder SK 40 Spindle speeds 0-4,000 rpm Quill stroke 60 mm Vertical head swivel 90 degrees Total power requirement 5.0 kW Machine weight approx. 1.3 t Space requirements approx. 2.00 x 2.00 x 2.00 m

Deburring of sheet metal edges using rotating stainless steel brushes up to sheet thickness 6 mm

Machine comes from the Daimler Benz technical center X 650 mm Y 500 mm Z 450 mm Table size 1,100 x 600 mm Table load 450 kg Speed range 6,500 rpm Spindle holder SK 40 WZ changer 24-fold Control Siemens 840 D Total power 20 kW Machine weight 5500 kg Bm9zrnafs87 Space requirement (W x D x H) 2.3 x 3.1 x 2.3 m Condition very good

Malzmühle Fa. Künzel Type 16/16 2 reels Malt hopper with scales Shotgun - 1.5 KW Built in 1994

Kunzmann WF4/3 - Universal milling machine - Heidenhain position display - Stepless feed in all axes - Rapid traverses in all axes - Hydraulic tightening system - Rigid angle table - Electrical central lubrication - Coolant device - Workplace lighting - Machine feet - Year of construction 1995 Specifications - Mount: SK40 - Speed range (infinitely variable): 40 - 2550 rpm - Travel X/Y/Z: 400 / 320 / 400 mm - Feed X/Y/Z: 0 - 2000 mm/min - Quill stroke vertical: 60 mm - Dimensions WxHxD: approx. 1600 x 1850 x 1350 mm - Weight: approx. 1500 kg

Tool diameter: mm sanding disc diameter: mm Motor output: 5 kW total power requirement: kw Weight: 1.500 kg Overall size: mm Control: cnc The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

2 x milling machines Kunzmann WF 650 BJ 2005

x-travel: 450 mm y-travel: 200 mm z-travel: 465 mm total power requirement: 2,6 kW weight of the machine ca.: 1.2 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Univ. NC Tool Milling Machine KUNZMANN Type WF 3/4Masch. No. 341020 Year of construction 1998Travel distances X: 400 mm Y: 320 mm Z: 400 mmTable size 650 x 350 mmSpindle holder SK 40Spindle speed 40 - 2500 rpm. Feeds X, Y and Z axis 0 - 1000 mm/min. infinitely variableRapid traverse X, Y axis 4000 mm/min. Rapid traverse Z-axis 3000 mm/min. Quill adjustment vertical 60 mmDrive power Spindle motor 3 KWnet connection 400 volts, 50 Hz- CNC line control Heidenhain TNC 124- Spindle speed via 2 gear stages and

x-travel: 400 mm y-travel: 350 mm z-travel: 400 mm turning speed range: 1 - 4000 U/min spindle taper ISO: 40 table surface area: 650 350 mm Control: Heidenhain TNC 124 total power requirement: 3 kW weight of the machine ca.: 1,2 t dimensions of the machine ca.: 2 2 2 m Equipment: Electronic handwheel Tool cabinet The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

CNC Vertical Machining Center "KUNZMANN BA 1000 SK" With track control Heidenhain iTNC 530 Year of Make: 2013 Travels: X 1020 Y 620 Z 920 Speed range: 1 – 14,000 rpm infinitely variable With the following accessories: Rigid angle table 1200 mm x 610 mm clamping surface NC Attachment Rotary Table WALTER 0 500 mm B Axis Swivel Head (Torque Drive) + 30 / - 120 degrees Vertical tool changer with 40 magazine positions ( SK 40 ) 3 D Probe Heidenhain Electronic handwheel Fixed full protective cladding with interior lighting IKZ plant Coolant Setup Oil mist extraction Chip conveyor Operating instructions

This 3-axis KUNZMANN WF 4/3 was manufactured in 2001. It features a vertical spindle with a swiveling head, CNC-controlled X, Y, and Z axes, and a spindle taper of SK40. The spindle speed ranges from 0 to 4,000 rpm with rapid traverse rates up to 1,000 mm/min on all axes. Consider the opportunity to buy this KUNZMANN WF 4/3 universal machining centre. Contact us for more information about this machine.

Description with frequency converter and preset counter Machines No. 55661

Description Grieser & Kunzmann Wellendingen mobile, infinitely height-adjustable and rotatable roller table GUK RT-35 built in 1993 – overhauled -Inclined roller ruler for arch alignment -Speed adjustable -Inlet width 350mm -Power supply 220V

Description mobile 2nd folding unit GUK FA 52-4 but there is only 1 folding bag built-in ! Built in 1987 mobile, previously used on endless cutter Böwe 310 – noise protection device – cutting device high-performance cutting system Böwe 310

This 3-axis KUNZMANN BA1400 was manufactured in 2017. It features a powerful 28 kW motor and a Heidenhain TNC 640 control unit. The machine has a table size of 1400 x 710 mm and can handle a maximum workpiece weight of 1500 kg. If you are looking to get high-quality machining capabilities, consider the KUNZMANN BA1400 vertical machining centre we have for sale. Contact us for further details.

cutting capacity: 2,5 mm mm throat: 750 mm round blank diameter max.: ca. 1500 mm weight of the machine ca.: ca. 800 kg includes on set of new replacement tools The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

This 3-axis KUNZMANN WF9 CNC was manufactured in 1999. It features a reliable Heidenhain TNC 410M control system, ensuring precision and efficiency in operations. If you are looking to get high-quality machining capabilities, consider the KUNZMANN WF9 CNC vertical machining centre we have for sale. Contact us for further details.

This 6-roller mill from Künzel Maschinenbau GmbH is a reliable and powerful solution for malt grinding in breweries. With a capacity of up to 3 tons per hour of coarse grind, it is well suited for medium to high throughput operations. The mill is powered by a 7.5 kW motor running at 1450 rpm and delivers consistent and efficient grinding results. The system comes complete with a grist container and grist transport, making it a ready-to-use solution for integration into existing brewhouse systems. Our team at VBW Asset Trade will be happy to answer your questions., Additional title: 6 roller mill, Capacity: 3 t/h coarse grist, Rotation per minute of the motor: 1450 1/min, Power: 7,5 kW motor capacity, Features: 6 roller , Periphery: grist case, grist transport

CNC Machining Center Kunzmann WF 650 Control: Heidenhain iTNC 640 Year of Make: 2015 Internal Machine No: 67 Travels: X-axis 650 mm Y-axis 500 mm Z-axis 450 mm Rotary table C-axis: Ø 400 mm Swivel range A-axis: +120/-95° C-axis rotation range: 360° Mount: SK 40 DIN69871 Tool magazine: 40-fold Spindle speed: 1 – 12,000 rpm Spindle swivel range: +5 / -92° - Coolant system - IKZ - Electronic handwheel HR 510 FS - Chip auger

Technical data: Manufacturer: Kunzmann Type: WF4 CNC Year of Make: 1999 Control: Heidenhain TNL 410 Travel: X 400 mm Y 320 mm Z 400 mm Working spindle Speed: 0 – 4,000 rpm Work table Dimensions L/W: 650 x 350 mm Tool/movement Tool holder: SK40 Quill stroke: 60 mm Dimensions and weight Dimensions: approx. 2,500 x 1,800 x 2,000 mm Weight: 1,800 kg Condition Condition: Used Functional: Tested and fully functional