kuhl used for sale

Ground precision ball screw, D40 mm, 1200 mm, Kuhn, new As good as new in original packaging! The high quality part comes from a spare parts warehouse of a mechanical processing of a large car manufacturer, is completely as new and in the original packaging. Attention: We have many, in stock, high quality ball screws in different versions in the diameters 32, 40, 50, 63 and 83mm. Please have a look at our website of IPV GmbH. Ball screw, Ke.Nr. 16000855, Sp.Nr. 5830, D40, 1200 mm, Fa. Kuhn Ball screw diameter 40 mm, Pitch 10 mm, Length of thread 1015 mm Length of ball screw nut 70 mm, Max. total stroke 945 mm, Total length of the spindle 1200 mm Diameter for coupling with motor 20 mm Diameter bearing seat A 25 mm, Diameter bearing seat B 30 mm Functional guarantee! We cannot provide a conventional guarantee and warranty for second-hand parts. However, we give you  ...

Ground precision ball screw, D63mm, 1730mm, Kuhn, new As good as new in original packaging! The high quality part comes from a spare parts warehouse of a mechanical processing of a large car manufacturer, is completely as new and in the original packaging. Attention: We have many, in stock, high quality ball screws in different versions in the diameters 32, 40, 50, 63 and 83mm. Please have a look at our website of IPV GmbH. Ball screw, Ke.Nr. 14000988, Sp.Nr. 2471+17, D63, 1730 mm, Fa. Kuhn Ball screw diameter 63 mm, Pitch 10 mm, Length of thread 1455 mm Length of ball screw nut 143 mm, Max. total stroke 1312 mm, Total length of the spindle 1730 mm Diameter for coupling with motor 38 mm Diameter bearing seat A 45 mm, Diameter bearing seat B 45 mm Functional guarantee! We cannot provide a conventional guarantee and warranty for second-hand parts. However, we give y ...

The original part is a main and KO extruder from Kuhne built in 2006, the system was extended in 2010 by an additional extruder from the SML (coating unit). Plant description: COEX cast film line with additional coating unit. The main plant is equipped with a co- and a main extruder. The coating unit with a main extruder. Processing of thermoplastics in a processing range of 90-300°C. The system can be operated with the following combinations: • Main unit (CoEx system) with coating unit • Main unit (CoEx system) without coating unit • Only coating unit with unwinding unit for carrier film For operation in the various combinations, the corresponding additional units are switched on or off. Possible layer structures: Main plant: - Monofilm with release film if required - 3-layer film (A-B-A) with release film if required Coating: - Monofilm on carrier material if req ...

Deze extruder lijn van Kuhne staat bij Plastima Used Machinery in de machineopslag. De machine komt uit 2008 en verkeerd in prima staat. Merk: Kuhne GmbH Model: K 60E - 33D Typen schroef: enkelschroef Bouwjaar: 2008 Schroef Ø: 600mm L/D-verhouding: 33 Hoogte cyclinder: 425 mm Bls Ud Dou Etygevycep Kegelhoogte: 325 mm Total height: 750 mm

This 3-axis KUHLMEYER Fasen Fix 4.1-1500 grinding machine was manufactured in 2012. It is designed for precision grinding applications, offering robust performance and reliability. If you are looking to get high-quality grinding capabilities, consider the KUHLMEYER Fasen Fix 4.1-1500 machine we have for sale. Contact us for more information.

This KUHNE KS45-24D compounding extruder was manufactured in 2006. Ideal for processing a variety of materials, it offers robust construction and reliable performance. Consider the opportunity to buy this KUHNE KS45-24D compounding extruder. Contact us for more information.

Kuhse control cabinet for CHP incl. breaker 800A

Designed for COEX- castfoil production with additional coating unit. The extrusion part of the line has 2 extruders; the coating unit has 1 extruder. Processing of thermo plastics in a temperature range of 90-300°C. Different combinations of production are possible: - main unit (CoEx) with coating 
 - main extruder (CoEx) without coating 
 - coating processing over winding unit on an existing base film 
 For production in the different described combinations you can lock the not necessary equipment parts. 
 POSSIBLE LAYER STRUCTURES: Main extruder: - Mono film if necessary with tensilized film 
 - 3- layer film (A-B-A) if necessary with tensilized film 
Coating unit: 
 - mono film on excisting base film if necessary with second tensilized film Unwind diameter: max. 1.000 mm Allowed roll/bobbin weight: max1.500kg MAIN EXTRUSION UNIT To ...

Copying fraes machine Kuhlmann Type GM 1-2 Machine in very good condition. Optional: very extensive access at an additional cost Zubehoer s/he/sheers, milling spindles, sub-machines for circular copying, written fonts, fraesstichel with quick-change device, copy spin, Radient template for radii in 0.5mm rising, clamping devices, Stencils and much more! Special price Tool cabinets milling spindle spindle grasses engraving fonts brass copper table

PLC control, digital output -Manufacturer: KUHNKE -Type: 653.000.43 -Quantity: 1x power supply unit included -Dimensions: 260/135/H235 mm -Weight: 3.2 kg

For sale is a used long belt sander (The machine is in the preliminary stage, photo is of a similar machine) Manufacturer: Kuhlmeyer Model: ZBS Year of Make: 2003 Working Area: 3,000x800mm Band size: 9,000x100mm Included: Grinding table height-adjustable, 5-axis workpiece handling device, swap shelf and a supply of belts If you have any further questions, please call or write to us!

Manufacturer: Kuhnke Steuerung, FREE TEXT: mit CPU Karte, Free text 1: mit RAM Karte, Free text 2: inkl Einsteckmodule,

Hersteller : Kuhnke Streckenkarte, Spare part from machine: Heesemann, Serial number: 657.452.01,

Hersteller : Kuhnke, Spare part from machine: Heesemann, Type: Schleifmaschine,

Hersteller : Kuhnke Streckenkarte, Spare part from machine: Heesemann, Serial number: 657.452.01,

Hersteller : Kuhnke, Spare part from machine: Heesemann, Control: CECC 75101-801-C064MS-G1A-3G, Serial number: B5282-B1300-G963, Axis card: 140.642.01,

Hersteller : Kuhnke Streckenkarte, Spare part from machine: Heesemann,

Hersteller : Kuhnke Streckenkarte, Spare part from machine: Heesemann, Serial number: 657.452.69,

Hersteller : Kuhnke Siemens Streckenkarte, Spare part from machine: Heesemann, Type: PC 612, Control: B5282-B1300-C963, Serial number: CECC 75101-801-C064MS-C1A-3G, Axis card: 657.452.69,

Hersteller : Kuhnke Streckenkarte, Spare part from machine: Heesemann, Type: 657.451.03,

Hersteller : Kuhnke Streckenkarte, Spare part from machine: Heesemann, Type: Siemens PC 612 C B5282-B1300-C963,

Hersteller : Kuhnke, Spare part from machine: Heesemann, Type: Siemens PC 612 B5282-B1300-C963, Control: 657.452.69, Serial number: CECC 75101-801-C064MS-C1A-3G,

Hersteller : Kuhnke Streckenkarte, Spare part from machine: Heesemann, Type: 657.451.03,

Manufacturer: Elektronikkarte Heesemann Kuhnke Rollensteuerung, Type: für Heesemann Druckbalken signale, FREE TEXT: Rollensteuerung 42444100,

Manufacturer: Kuhnke Steuerung, Type: KUAX 653,

Manufacturer: Kuhnke, Type: KUAX 653, war verbaut inMaschine: Heesemann KSA, Standort: Lahde,

Manufacturer: Kuhlmeyer Model: Double Sandbelt Machine Year of Manufacture: 2019 Condition: Fully Operational Find more here - / Contact us at -

A 13-layer blown film line Kuhne for the production of biaxially oriented high-barrier films is available. Film thickness range: 20µm-80µm, max. film width: 1400mm, max. output capacity: 400kg/h, extruders: 13 units, max. die head pressure: 500bar, flex ring die: 250mm/300mm, calibration tools: 200mm/225mm/250mm/280mm/300mm, yield: 80%-90%. Laminating films: sealing layer thickness: 25µm-35µm, printing layer thickness: 25µm-45µm. Monofilms: shrink lid thickness: 23µm-28µm, AF lid film thickness: 25µm-45µm, top and bottom film thickness: 75µm, balloon film thickness: 25µm-31µm. Documentation available. An on-site inspection is possible.

Centering Machine - KUHN KAZ 80-2 -Max. workpiece diameter / round 80mm -Max. workpiece diameter / square 60mm -Centering Length - Endless -Clamping unit with self-centering vice -Spindle drive 1.8 KW -Drill chuck -Chip tray -Connection cable -Forklift insertion for transport Dimensions: LxWxH 1.7x0.7x1.4 meters / Weight 600 kg

Belt/ozilierend swiveling Roll in the table

Motor data -1/1.9 HP -710/1420 RPM -380 Volt -3.7/3.8 amps

Technical data: - Edge grinding machine for edge processing on - welded boxes, cabinets, safes, etc. - Control SIEMENS for clocks + oscillation - max. grinding height approx. 1200 mm - Grinding belt dimension 100 x 2240 mm - Grinding belt speed 12 + 24 m/s - Grinding unit swivelling - 2 magnetic clamping plates - Mot. Grinding dust extraction - Pneumatic connection 6 bar - Drive 400 V - Space requirement approx. W 2500 x H 2000 x D 2000 mm - Weight approx. 1500 kg

Timing relay, reverse power monitor, relay, heating current monitoring, contactor, semiconductor contactor, contactor -Type: KPW 20 5/1A 400V -Price: per piece -Number: 4x available -Weight: 0.7 kg

In 2020, the machine was extensively overhauled for 7000 €. Proof available. Processes: - Chamfering 60° - Longitudinal turning up to a maximum of 40 mm - Centering drilling Workflow fully automatic: - Tensioning, feeding to - Rapid traverse forward - Work feed - Dwell time for cutting - Rapid traverse back - Relax, feed on Specifications: workpiece diameter approx. 80 mm workpiece diameter 6kt-SW 70 mm min. workpiece diameter round and 6kt 10 mm min. workpiece length 450 mm Speed range infinitely variable Level I/Stage II = 51-306/102-612 Electrical equipment 220/380 V, 50 Hz Motor power main motor kW 1.3/1.8 Engine power Coolant motor kW 0.07 Required air pressure 6-8 bar Weight approx. 520 kg Dimensions: L 1520 mm x W 610 mm x H 1350 mm Roller conveyor

Hersteller : Simenskarte, Type: 6 ES 5921-3WB13, Control: Siemens, Serial number: 548.226.7102,

throat: ca. 300 mm stroke: ca. 200 mm pressure capacity max.: 35 t die cushion hydr. pressure/stroke: 15 t total power requirement: 5,6 kW weight of the machine ca.: ca 2,5 t dimensions of the machine ca.: 1 x 0,9 x H 2,4 m m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

KUHN HR 304 D + SITERA 330-20 E – Drill combination (new machine, YOC 2023) For sale is a new KUHN rotary harrow drill combination consisting of HR 304 D and SITERA 330-20 E. KUHN HR 304 D Power Harrow • Working width: approx. 3.00 m • Overall width: 3.12 m • Rigid frame, multiplex gearbox • PTO speed: 540 / 750 / 1000 rpm • 10 rotors, FAST FIT quick-change tines • Working depth: 3–25 cm (up to 31 cm with long tines) • Overload protection with tripping • Three-point hitch cat. 2 or 3 • Max. tractor power: 190 hp • Min. tractor power: 80 hp • Weight: approx. 1,035 kg • Attachment for seed drill KUHN SITERA 330-20 E seed drill • Year of construction: 2023 • Working width: 3.00 m • Transport width: 3.00 m • Number of rows: 20, row spacing: 15 cm • SEEDFLEX 1000 seed drill (double discs) • HELICA volumetric rotary dosing  ...

Kuhn Vari Master 153 – 5 coulter fully reversible plough (new machine) For sale is a new Kuhn Vari Master 153 – 5 coulter fully reversible plough. General data • Machine type: Plow • Manufacturer: Kuhn • Model: Vari Master 153 • Year of construction: 2023 • Available: immediately • Condition: New machine • Weight: 1,815 kg • Max. permissible Tractor power: 225 hp Technical equipment • 5 flock • Working width: 2.5 m • Working width per share: 30–50 cm hydraulically adjustable • Cutting width adjustment hydraulic • Solid sheet body • Body distance: 102 cm • Frame height: 80 cm • Lower link quick coupling / support axle Ø 60 Cat. II • Trunnion Ø 120 mm • Front frame 700 × 150 mm / rear 150 × 150 mm • Stone protection • Disc Six Ø 500 mm serrated • Pre-peeler ZRL • Shock-absorbing jockey wheel 690 × 32 ...

Kuhn Vari Master 123 – 5 coulter fully reversible plough (demonstration machine) For sale is a Kuhn Vari Master 123 demonstration machine – 5 coulters of fully reversible plough in very neat condition. General data • Machine type: Plow • Manufacturer: Kuhn • Model: Vari Master 123 • Type: VM1234E/5T102 • Year of construction: 2024 • Weight: approx. 1,195–2,570 kg • Number of shares: 5 • Condition: Demonstration machine Technical equipment • Solid sheet body • Hydraulic cutting width adjustment (Vari system) • Serrated disc corner • Pre-peeler • Training wheel • Stone protection • Mounted Reversible Plough • Hydraulic plough rotation Condition • Optical condition: very well maintained (demonstration machine) • Technical condition: perfect Powerful 5-coulter full reversible plough with Vari system for flexible  ...

UHN BPR 280 – Flail mower (new machine, year 2025) For sale is a new KUHN BPR 280 flail mower, manufactured in 2025. Robust construction for grassland, arable farming and set-aside areas. Technical data Manufacturer: KUHN Model: BPR 280 Year of Make: 2025 Working width: approx. 2.80 m Net weight: approx. 990 kg Mounting: Three-point Cat. II PTO drive Made by NOBILI for KUHN (Made in Italy) Equipment & Features Robust mulch housing with reinforced construction Large-dimensioned rotor with flail piece Height-adjustable back-up roller Side skids Front and rear protection with rubber skirts Solid bearing and drive unit Hydraulic side offset Maintenance-friendly design CE compliant Ideal for Grassland maintenance, stubble cultivation, catch crops, set-aside areas Contact Now Kristina Kreimer – Surplex / TBAuctions k.kreimer@tbauctions.com Phone: +4 ...

KUHN mounted plough type QR 65, equipped with 5 bodies in 16 inches. Robust machine, ideal for classic agricultural work. Equipped with a hydraulic turning system. Overall condition correct for its age. Presence of surface rust due to storage, but sound structure. Bases and mouldboards still usable. Stored under cover. Features Brand: KUHN Model: QR 65 Number of bodies: 5 Width: 16\" Type: Reversible Plow Hitch: 3 points Control: Hydraulic Auction-ID: A3-43507-33530

KUHN ESPRO 6000 R – Pneumatic seed drill (new machine, YOC 2023) Powerful 6 m seed drill for efficient sowing using mulch and no-till methods. High area performance with precise seed placement. Technical data • Manufacturer: KUHN • Model: ESPRO 6000 R • Year of construction: 2023 • Working width: 6.00 m • Transport width: 3.00 m • Number of rows: 40 • Row spacing: 15 cm • Tank volume: 3,500 l • Weight with seed harrow: approx. 8,000 kg • Filling height: approx. 2.50 m • Working speed: 7–17 km/h • Required tractor power: 200–350 hp • Hydraulics: 2 × PE + 1 × free return • Electrical: 7-pin plug Technology & Equipment • Crossflex seeding elements with hydraulic coulter pressure and sowing depth adjustment • Offset seed discs • 48 machining discs in 2 rows • 20 tire packers (900 × 215) • Central, volumetric  ...

KUHN GMD 3125 F-FF – front mower Technical data Manufacturer: KUHN Model: GMD 3125 F-FF Year of Make: 2020 Working width: approx. 3.10 m Cultivation: Front Attachment Multi-disc mower deck Weight: approx. 1,100–1,200 kg (according to the nameplate) Facilities Incl. drive shaft Hydraulic relief Foldable side guards Protective tarpaulin with warning signs Robust cutter bar construction Cutting height adjustment via sliding plate Condition Visual condition: good, usual signs of wear Technical condition: functional Wear according to the year of manufacture Ideal for professional grassland management and high area output. Contact Now Kristina Kreimer – Surplex / TBAuctions k.kreimer@tbauctions.com Phone: +49 151 55771219 Auction-ID: A7-45490-31

Belrecolt Kuhn Rotary Harrow HRB 302 D Cage Roller Hydraulic linkage Erased traces Teeth 25% Good Auction-ID: A3-43510-33155

For DMG HSC 75

Works perfectly Auction-ID: A3-43507-36546

Works perfectly Auction-ID: A3-43507-36983

Auction-ID: A1-45188-53