kuhl used for sale

Air-cooled liquefaction kit Bitzer without compressor,Type LH135/F302H, New, Base plate with condenser and collector

Belt/ozilierend swiveling Roll in the table

Motor data -1/1.9 HP -710/1420 RPM -380 Volt -3.7/3.8 amps

Make: LDF LONGONI, plug-in ready Height: 190 cm - with integrated refrigeration unit, refrigerant R404A - with shelf (5 pcs.)

Storage tanks outside marbled for wine, water, fruit juice, schnapps with cooling jacket 1.000 liters NEW! Measurement und weight: Diameter: 920 mm Total height: 2150 mm Cylinder height: 1500 mm Material: V2A - AISI 304, 1.4301 Surface Upper body: V2A= 304, inside IIID outside marbled Cylinder tank: V2A=304, inside IIID, outside marbled Lower bottom: V4A=316, IIIC=2B marbled Upper body: Conical top 1 x ventilation and exhaust connection DN50 2 x crane eyes Cylinder tank: 2 x ladder hook 1 x manhole 444 x 312 mm pulled out to the front, can be swiveled with bracket and holder 1 x sample valve DN 15 (on extra charges) 1 x level indicator with bar and scale 1 x immersion socket for temperature (on extra charges) 1 x thermometer digital (on extra charges) 1 x clear outlet DN 50 with butterfly valve, with lid (on extra ch ...

Copying fraes machine Kuhlmann Type GM 1-2 Machine in very good condition. Optional: very extensive access at an additional cost Zubehoer s/he/sheers, milling spindles, sub-machines for circular copying, written fonts, fraesstichel with quick-change device, copy spin, Radient template for radii in 0.5mm rising, clamping devices, Stencils and much more! Special price Tool cabinets milling spindle spindle grasses engraving fonts brass copper table

Storage tanks outside marbled for wine, water, fruit juice, schnapps with cooling jacket 2.000 liters NEW! Measurement und weight: Diameter: 1110 mm Total height: 2650 mm Cylinder height: 2000 mm Material: V2A - AISI 304, 1.4301 Surface Upper body: V2A= 304, inside IIID outside marbled Cylinder tank: V2A=304, inside IIID, outside marbled Lower bottom: V4A=316, IIIC=2B marbled Upper body: Conical top 1 x ventilation and exhaust connection DN50 2 x crane eyes Cylinder tank: 2 x ladder hook 1 x manhole 444 x 312 mm pulled out to the front, can be swiveled with bracket and holder 1 x sample valve DN 15 (on extra charges) 1 x level indicator with bar and scale 1 x immersion socket for temperature (on extra charges) 1 x thermometer digital (on extra charges) 1 x clear outlet DN 50 with butterfly valve, with lid (on extra cha ...

Storage tanks outside marbled for wine, water, fruit juice, schnapps with cooling jacket 3.000 liters NEW! Measurement und weight: Diameter: 1110 mm Total height: 3650 mm Cylinder height: 3000 mm Material: V2A - AISI 304, 1.4301 Surface Upper body: V2A= 304, inside IIID outside marbled Cylinder tank: V2A=304, inside IIID, outside marbled Lower bottom: V4A=316, IIIC=2B marbled Upper body: Conical top 1 x ventilation and exhaust connection DN50 2 x crane eyes Cylinder tank: 2 x ladder hook 1 x manhole 444 x 312 mm pulled out to the front, can be swiveled with bracket and holder 1 x sample valve DN 15 (on extra charges) 1 x level indicator with bar and scale 1 x immersion socket for temperature (on extra charges) 1 x thermometer digital (on extra charges) 1 x clear outlet DN 50 with butterfly valve, with lid (on extra c ...

Storage tanks outside marbled for wine, water, fruit juice, schnapps with cooling jacket 5.100 liters NEW! Measurement und weight: Diameter: 1610 mm Total height: 3260 mm Cylinder height: 2490 mm Material: V2A - AISI 304, 1.4301 Surface Upper body: V2A= 304, inside IIID outside marbled Cylinder tank: V2A=304, inside IIID, outside marbled Lower bottom: V4A=316, IIIC=2B marbled Upper body: Conical top 1 x ventilation and exhaust connection DN50 2 x crane eyes Cylinder tank: 2 x ladder hook 1 x manhole 444 x 312 mm pulled out to the front, can be swiveled with bracket and holder 1 x sample valve DN 15 (on extra charges) 1 x level indicator with bar and scale 1 x immersion socket for temperature (on extra charges) 1 x thermometer digital (on extra charges) 1 x clear outlet DN 50 with butterfly valve, with lid (on extra ...

Storage tanks outside marbled for wine, water, fruit juice, schnapps with cooling jacket 6.150 liters NEW! Measurement und weight: Diameter: 1600 mm Total height: 3650 mm Cylinder height: 3000 mm Material: V2A - AISI 304, 1.4301 Surface Upper body: V2A= 304, inside IIID outside marbled Cylinder tank: V2A=304, inside IIID, outside marbled Lower bottom: V4A=316, IIIC=2B marbled Upper body: Conical top 1 x ventilation and exhaust connection DN50 2 x crane eyes Cylinder tank: 2 x ladder hook 1 x manhole 444 x 312 mm pulled out to the front, can be swiveled with bracket and holder 1 x sample valve DN 15 (on extra charges) 1 x level indicator with bar and scale 1 x immersion socket for temperature (on extra charges) 1 x thermometer digital (on extra charges) 1 x clear outlet DN 50 with butterfly valve, with lid (on extra cha ...

Storage tanks outside marbled for wine, water, fruit juice, schnapps with cooling jacket 7.800 liters NEW! Measurement und weight: Diameter: 1800 mm Total height: 3650 mm Cylinder height: 3000 mm Material: V2A - AISI 304, 1.4301 Surface Upper body: V2A= 304, inside IIID outside marbled Cylinder tank: V2A=304, inside IIID, outside marbled Lower bottom: V4A=316, IIIC=2B marbled Upper body: Conical top 1 x ventilation and exhaust connection DN50 2 x crane eyes Cylinder tank: 2 x ladder hook 1 x manhole 444 x 312 mm pulled out to the front, can be swiveled with bracket and holder 1 x sample valve DN 15 (on extra charges) 1 x level indicator with bar and scale 1 x immersion socket for temperature (on extra charges) 1 x thermometer digital (on extra charges) 1 x clear outlet DN 50 with butterfly valve, with lid (on ext ...

Storage tanks outside marbled for wine, water, fruit juice, schnapps with cooling jacket 10.250 liters NEW! Measurement und weight: Diameter: 2060 mm Total height: 3650 mm Cylinder height: 3000 mm Material: V2A - AISI 304, 1.4301 Surface Upper body: V2A= 304, inside IIID outside marbled Cylinder tank: V2A=304, inside IIID, outside marbled Lower bottom: V4A=316, IIIC=2B marbled Upper body: Conical top 1 x ventilation and exhaust connection DN50 2 x crane eyes Cylinder tank: 2 x ladder hook 1 x manhole 444 x 312 mm pulled out to the front, can be swiveled with bracket and holder 1 x sample valve DN 15 (on extra charges) 1 x level indicator with bar and scale 1 x immersion socket for temperature (on extra charges) 1 x thermometer digital (on extra charges) 1 x clear outlet DN 50 with butterfly valve, with lid (on extra  ...

ISO refrigerated container 20ft standard box, manufactured to ISO 1496-1 Type: 22R1 State - used and processed (on request new paintwork at an extra cost!) - Current PTI check - CSC approval - ready for immediate use Visit of our offered containers is possible at any time on site! Color Pure white RAL 9010 TECHNICAL DATA - Dimensions on the outside: (L x W x H) 6,058 x 2,438 x 2,591 mm - Dimensions inside: (L x W x H) 5,412 x 2,292 x 2,300 mm - Volume: 36.5 m3 - Weight: 2.88 t - Payload: 21.12 t - Temperature range: -25°C to +30°C - Refrigeration carrier: R134a - Power: 6-10 kW/h (indicative! Real values depend on several factors.) - Cooling unit: Carrier Streamline (2006 built), 380-460 V, 50-60 Hz, 5-pin plug/CEE 32A - Transportable and crane-capable - PTI check (= Pre Trip Inspection) function check - CSC safety approval SPECIAL USE / CONVERSION (on  ...

Technical data: - Edge grinding machine for edge processing on - welded boxes, cabinets, safes, etc. - Control SIEMENS for clocks + oscillation - max. grinding height approx. 1200 mm - Grinding belt dimension 100 x 2240 mm - Grinding belt speed 12 + 24 m/s - Grinding unit swivelling - 2 magnetic clamping plates - Mot. Grinding dust extraction - Pneumatic connection 6 bar - Drive 400 V - Space requirement approx. W 2500 x H 2000 x D 2000 mm - Weight approx. 1500 kg

Cooling cell with quail cooling motor Year of construction 2011 Coolant: R134a 2207 Height: 250cm Width: 90cm depth: 225cm

Cold room with two doors for blast freezer and freezer. Panel thickness 100mm Mass: Length 600 cm. Width 300 cm. Height 260 cm. Contact: Coman Teofil Phone: +436641838175 E-mail: infofrigocom.at

Features Volume 40000 L Material V2A (AISI 304) 1.4301 Vertical design Last Use Food Number of feet 4 Total height 7500 mm Height 5800 mm Diameter width 2800 mm Surface inside 2B=IIIC ground Surface marbled on the outside Description Topsoil: Clapper bottom 2 crane eyes Threaded welding nozzle DN 100 central to DN 40 Threaded Socket DN 50 Fermentation valve DN 50 Check valve DN 50 Sprinkler ring Tank cylinder: Level indicator with bar and scale and standpipe valve DN15 Manhole 420x320 mm Sample tap DN 15 Ladder hook at the top Dip shank sleeve for temperature display Downward-swept CIP cable with DN 40 vent line with DN 50 connection thread Clear drain with angled seat valve DN 50 Cooling line CIP Ball Underbody: Clapper bottom Forward-drawn floor bead with angled seat valve DN 50 and outlet pipe DN 50 with flange 4 calotte feet, heigh ...

VAKONA energy-saving cooling tumbler ESK 850 STL-B Year of Make: 2017 Equipment: – Container, machine cabinet and frame made entirely of stainless steel – Machine fixed – Touch screen control for operation in manual and automatic operation – Storage space for up to 99 recipes with freely programmable parameters: total, working and break time, rotation speed, Temperature, vacuum height, ventilation intervals, container position and container swivel operation – Rotational speed of the arm infinitely variable from 3-18 rpm – Direct cooling system with powerful cooling unit, heat exchanger in double-jacketed tank made entirely of stainless steel – Vacuum system including high-performance vacuum pump, fully automatic, programmable ventilation cycles, – sterile filters for disinfection of ventilation air, hygienic automatic water separator – electric infinitely ...

For sale is a used long belt sander (The machine is in the preliminary stage, photo is of a similar machine) Manufacturer: Kuhlmeyer Model: ZBS Year of Make: 2003 Working Area: 3,000x800mm Band size: 9,000x100mm Included: Grinding table height-adjustable, 5-axis workpiece handling device, swap shelf and a supply of belts If you have any further questions, please call or write to us!

Heat exchanger, cooling coil, cooling pipe, cooling spiral -Heat exchanger: cooling coil with fins -Dimensions: see photos -Material: aluminum -Transport dimensions: Ø65 x 365 mm -Weight: 0.5 kg

Miwe controller for TLK NK cleaned Year of manufacture 2001

Manufacturer: Kuhlmeyer Model: Double Sandbelt Machine Year of Manufacture: 2019 Condition: Fully Operational Find more here - / Contact us at -

New stem radiator for large engines Dimensions : 180 x 900 x 2000 mm Weight : 500 Kg. With fan wheel

Boring head, spindle head, drill head, grooving head, grooving head, spindle drilling head, boring head, spindle tool, peeling drill, cutting head -Slicing drill: drill head cutting head with coolant device -Drill diameter: 62 mm -Intake: MK4 -Dimensions: 740/76/107 mm -Weight: 5.4 kg

Boring head, spindle head, drill head, grooving head, grooving head, spindle drilling head, boring head, spindle tool, peeling drill, cutting head -Slicing drill: drill head cutting head with coolant device -Drill diameter: 70mm -Intake: MK5 -Dimensions: 825/65/70 mm -Weight: 18 kg

Three older milling machines are available. 1) CNC vertical center Bridgeport VMC 1000/22, year of manufacture: 1999, travel X/Y/Z: approx. 1020mm/510mm/500mm, table dimensions X/Y: approx. 1150mm/490mm, max. table load: 900kg, tool holder: SK40, tool positions: 22, speed: 6000rpm. Machine dimensions X/Y/Z: approx. 2850mm/2200mm/2750mm, weight: approx. 3900kg, control: Heidenhain TNC 410P. 2) CNC engraving and milling machine Kuhlmann Prokomat 25S, year of manufacture: 1991, travel X/Y/Z: approx. 700mm/600mm/300mm, table dimensions X/Y: 720mm/700mm, portal clearance X/Y: 800mm/400mm, feed: 6m/min, machine dimensions X/Y/Z: approx. 1600mm/1600mm/2400mm, weight: approx. 1600kg. Documentation available. An on-site inspection is possible. Individual sale possible.

throat: ca. 300 mm stroke: ca. 200 mm pressure capacity max.: 35 t die cushion hydr. pressure/stroke: 15 t total power requirement: 5,6 kW weight of the machine ca.: ca 2,5 t dimensions of the machine ca.: 1 x 0,9 x H 2,4 m m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

DMG MORI Kühlmittelanlage 980 l | 40-80 barYear of manuf. : 2018 Control : Sonstige ____________Description:In General:Manufacturer:DMG (Bürener Maschinenfabrik)Year of manufacture:2018Total number of pumps:5High-pressure pumps:2 (40 and 80 bar)Filter:Paper belt filterTank capacity:approx. 980 l

Process air cooler/ chiller/ chiller, air-cooled, Type: TAEevo Tech 251 P3 – 49.7 kW MTA S.p.A. TAEevo Tech 251P3 are air-cooled compact water chillers suitable for outdoor installation (-5°C to +46°C). Including crank tray heating, phase monitoring, buffer tank 350 ltr. and built-in P3 Circulation pump. Cold water outlet temperatures from -10°C to +30°C are adjustable. Cooling capacity kW 49.7 Cold water temp. Exit/Entry (°C): 7 / 12 Volume flow (m³/h) 8.48 Available pump pressure (bar) 2.61 Ambient temperature (°C) 32, Refrigerant R 410A, Electrical data: Voltage V 400, frequency Hz 50, phases Ph 3, Max. power consumption (kW) 27 Max. current (A) 46 Starting Current Circuit (A) 144 Protection class: IP54 Dimensions: Length (mm) 2250, Width (mm) 866, Height (mm) 2054, Weight (kg) 998 Connection Rp 2 " Price: on request in Euro (plus VAT from Ne ...

10,500 litre RIEGER mash tank with cooling coils Features: Volume 10500 L Material No. V2A Total height 3400 mm Overall length 4350 mm Cylinder length 2300 mm Diameter 2200 mm permissible. Operating overpressure 2 bar Operating temperature 30 °C Description: Material: Material: V2A - AISI 304 Surface: outside and inside 2B =IIIC Marbled front Top: - Threaded nozzle DN 50 – position center - 2 crane eyes - Manhole 410 mm round Tank cylinder: - With paddle with scraper, with cooling integrated in the paddle - with manhole 420 x 320 on the side - With tasting tap DN 20 - With dipping shaft sleeve with sensor - with airlock DN 50 - with large outlet slide with gear rod with outlet chute with ball valve DN 80 - With clear drain ball valve DN 65 Underbody: - with 4 feet Special features:  ...

Process air cooler/ chiller/ chiller, air-cooled, Type: TAEevo Tech 251 P3 – 49.7 kW MTA S.p.A. TAEevo Tech 251P3 are air-cooled compact water chillers suitable for outdoor installation (-5°C to +46°C). Including crank tray heating, phase monitoring, buffer tank 350 ltr. and built-in P3 Circulation pump. Cold water outlet temperatures from -10°C to +30°C are adjustable. Cooling capacity kW 49.7 Cold water temp. Exit/Entry (°C): 7 / 12 Volume flow (m³/h) 8.48 Available pump pressure (bar) 2.61 Ambient temperature (°C) 32, Refrigerant R 410A, Electrical data: Voltage V 400, frequency Hz 50, phases Ph 3, Max. power consumption (kW) 27 Max. current (A) 46 Starting Current Circuit (A) 144 Protection class: IP54 Dimensions: Length (mm) 2250, Width (mm) 866, Height (mm) 2054, Weight (kg) 998 Connection Rp 2 " Price: on request in Euro (plus VAT from Ne ...

12,500 litre RIEGER mash tank with cooling coils Volume 12500 L Material No. V2A Total height 3700 mm Total length 3500 mm Cylinder length 2400 mm Diameter 2250 mm permissible. Operating overpressure 2 bar permissible. Operating temperature 30 bar Description Material: Material: V2A - AISI 304 Surface: outside and inside 2B =IIIC Marbled front Top: - Threaded nozzle DN 50 – position center - 2 crane eyes - Manhole 410 mm round Tank cylinder: - With paddle with scraper, with cooling integrated in the paddle - with manhole 420 x 320 on the side - With tasting tap DN 20 - With dipping shaft sleeve with sensor - with airlock DN 50 - with large outlet slide with gear rod with outlet chute with ball valve DN 80 - With clear drain ball valve DN 65 Underbody: - with 4 feet Special features:  ...

Table size: 3000 x 1000 mm Drive power: 4.0 kW Sanding belt speed: 8 – 25 m/s Table height adjustment: 0 – 630 mm Sanding belt lengths: 9000 mm Space requirement: 4750 x 2300 mm Machine height: approx. 2500 mm Compressed air: 6 bar Features: -Two sanding belts for pre-sanding and finishing sanding -Triangle guide of the straps for a clear view and freedom of movement -Pneumatic abrasive belt clamping with ball guides -Adjustable belt speed -Tilting of the sanding belts up to 90° -Self-centering abrasive belt -Pneumatically opening belt channels -Manual workpiece movement in 3-axis -Each axle with brake or lock -Vacuum tension for the workpieces

For DMG HSC 75

Technical details Manufacturer: Friedli Type: Complete pelletizing plant Contract number: 714169 Fabrication number: F3148 Configuration: - Gruber hammer mill - Screw conveyor to conditioner - Stainless steel material conditioner - Starch dosing hopper with screw feeder - Stainless steel intermediate silo (500 l) - Aeration system - SC 200 S dosing screw (Ø200 mm) - Variable-speed 1.5 kW dosing motor - La Meccanica CLM 304 LC pellet press - Ring die system with forced feed - 45 kW press motor - V-belt drive with slip monitoring - 2 new press rollers + 1 reground set - 1 new die + 1 reground die (Ø304 mm, 6 mm holes) - Automatic lubrication system - Cooling screen with dust extraction - Fan and cyclone with rotary valve - Scraper conveyor - Pellet storage silo - Automatic bagging machine (1.5–25 kg) - Flintec weighing system - Bag sealing machine - Klockne ...