135,697 used machines on RESALE, but how to find them? Machine Search
The blow moulding stations are new and have never been used.
Type: 6B R1, beading for bearings of 20-100 mm diameter. Workpiece height: Max. 50 mm, Sheet thickness: Max. 0.5 mm.
Thyssen Krupp model GK270NC Banbury type internal mixer, 4 wing tangential rotors, Year of manufacture: 2003 Latest Continental design chamber! Hydraulic hopper + power pack. Body and hopper only in good condition. Unidrive gearbox and motor can be quoted for if required (same centres as 11D or F270).
used
hydraulic concrete steel Benders Krupp Futura B 703 steel bending machine with accessories and complete instructions Tech. Data performance table - steel 50-55 kp/mm2 Diameter 22 mm - 6 bars per bending, 28 mm-4, 32 mm 3,. Mtfgtw 50 mm 2 speed 4-12 / min Operation - with control or manual, operating dial - HAND - machine with possibility of 3 bending angle set - every page - 3 links + 3 right complete documentation, operating instructions much accessories more info upon request You can edit, flat, round steel accessories - various bending rollers, bolts, reducing roll, Overarm and the machine has device for Pipes. Bulk 2.3 x 1 x 1 m, Btto 1500 kg
Transfer press KRUPP PST-A 160 built in 1980. Technical data of the KRUPP PST-A 160 press: - nominal pressure: 160 tons - cutting force grade 1: 400 KN - force between stands: 1200 KN - number of working steps including cutting stage: 11 - distance between stands: 200 mm - slider stroke: 210 mm - drawing depth: 70 mm - range of jumps, infinitely adjustable: 15-75 / min. - production range of jumps with repeatability of its setting: 25-75 / min. - number of actuation movements: 15-25 / min. - a usable work resource for a jump in the range of 25-75 strokes per minute. : 20,000 J - maximum load on a single step: 500 KN - maximum load of a single step using inserts: 630 KN - maximum width of the tape: approx. 340 mm - maximum diameter of the cut: 120 mm - minimum diameter of the pattern: 30 mm - distance between stands: 2450 mm - height of tool building at the lower posi ...
Wire electrode, welding wire, welding wire, flux-cored wire -Manufacturer: Krupp, shielding gas wire electrode CrNi 19 9 -Type: NOVONIT 4316 Ø 0.8 mm -Dimensions: Ø 300/100 mm -Total weight: 15.4 kg
PET stretch blower, incl. Preform silo, conveyor, sorter and feed, up to 6000 bottles/hour, 6 stations, 0.2 - 3.0 litre, technically / optically good condition. Available at an additional cost: compressor system, mould cooler and moulds.
PET plug-in / blow era 10 blowing stations, capacity: approx. 8,000 - up to 10,000 bottles / hrs. Volume: 0.2 - 3.0 litre, incl. preform silo and steep conveyor and feeder.
Boring head, spindle head, drill head, plunge drill head, plunge head, spindle drill head, boring head -Recording: SK50 Minimum bore diameter: 95 mm -Max. bore diameter: 115 mm -Suitcase -Dimensions: 400/170/H140 mm -Weight: 12 kg
Ready-mix Concrete Plant, Concrete Mixing Plant Used Tower complex make Krupp Year of construction 1969 – Control engineering originally by Pfister Waagen Augsburg -Control currently from Dorner Electronic Complete system consisting of: Main tower steel structure by Krupp Multi-chamber silo 1 control room 1 Mixer THZ 3000 (Teka) Year of production 1980 Control engineering originally by Pfister Waagen Augsburg 1 mixer approx. THZ 1500 or THZ 2250 1 Single component silo with screw conveyor on steel frame 4-component silos with screw conveyors on steel frame 1 Sand Filling Elevator 1 steam boiler 1 Residual concrete preparation ( washing screw ) Changes and errors in the technical data, specifications and prices as well as prior sale reserved.
Boring head, spindle head, drill head, plunge drill head, plunge head, spindle drill head, boring head -Recording: SK50 Minimum bore diameter: 100 mm -Max. bore diameter: 120 mm -Suitcase -Dimensions: 350/170/H135 mm -Weight: 12 kg
Inv. Num. : 8150 Type: PDqV 4-500 Producer: KRUPP Created: 1972, GO 2008 Parameters: Compressive force: 500 t Table length: 3000 mm Table width: 1800 mm Distance between frame walls: 3100 mm Maximum stroke rate upper table: 11 1/min Ram stroke: 850 mm Adjustment of the ram: 350 mm Main motor power: 75 kW Machine weight: 158000 kg According to the GO in 2008, the press was in operation for a maximum of 100 hours. In the years 1972–2008, the press was operated in two shifts.
table length: 2200 mm table width: 115 mm table load: 600 t weight: 3 t : 2 : The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
width: 1000 mm weight: 88 kg height: 390 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
length: 880 mm weight: 60 kg height: 320 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Manufacturer: Krupp - Type: 4 - Inlet size: 630 x 355 mm - With Electrical motor
Manufacturer: Krupp - Type: 6 - Inlet size: 1.000 x 630 mm - With Electrical motor - Crusher is sandblasted and painted
Single column - eccentric press KRUPP type PEKRD 125 hMasch. No. 2861 Year of construction 1977Compressive force 125 ton. Projection 400 mmTable size 950 x 750 mmPlunger area 800 x 540 mmTable opening 100 x 250 mmStroke adjustment 8 to 160 mmPlunger adjustment 100 mmInstallation height largest stroke at the top max. 550 mmStroke rate 60 strokes/min. Table height above floor 800 mmEngine power 10 kWNetz connection 380 Volt, 50 Hz- Hydraulic overload in the plunger- Compressed air clutch-brake combination ORTLINGHAUS-
OVERHAULED - Size: 1.600 x 2.000 mm - With Electrical motor and springs.
plate width: 2500 mm plate depth: 4000 mm plate height: 345 mm no. of flutes: 11 : 2 weight of the machine ca.: 7000 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
A Friedrich Krupp flanging and grooving machine is available. Usable length: 390mm, min. container body diameter: 85mm, max. sheet thickness: 0.4mm, flywheel speed: 75rpm, weight: approx. 1000kg. An on-site inspection is possible.
Blow Molding Machine Krupp Model Blowmax 20 20 Cavities Capacity approx. 35,000 W/H Construction year 2007
loading area: mit Untergestell weight: 125 kg length: 900 mm height: 350 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: . length: 2200 mm plate width: 1500 mm plate height: 880 mm : : Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
plate width: 2000 mm plate depth: 3500 mm plate height: 270 mm weight: 5,5 t Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: Krups A100 : . Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
plate width: 2.000 mm plate depth: 3.000 mm plate height: 600 mm weight of the machine ca.: 6 t : : Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
plate width: 1.400 mm plate depth: 1.600 mm plate height: 310 mm weight of the machine ca.: jeweils 2,5 t 2 available: Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
plate width: 500 mm plate depth: 800 mm plate height: 50 mm no. of flutes: 6 weight of the machine ca.: 140 kg Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 100 t throat: - mm stroke: 8 - 116 mm total power requirement: 8 kW weight of the machine ca.: 7,5 t dimensions of the machine ca.: ca. 2,5 x 2,5 x 3,5 m No. 0778 Single-column eccentric press 1000 kN Stroke adjustment 8-116 mm, stroke rate 65/min, ram adjustment 80mm, Space requirement2.1x 1.7 x 3.1 m, Weight approx. 7500 kg Stand tiltable, 10°/20°/30° Working area: table 800 x 560 Drive: 8 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
