krauss used for sale

Krauss KM 1000-5700 M Injection Moulding Machine The machine is not in used after the maintenance was done 3-4 years ago.Plastic parts (some gaskets and O-rings) will need to be overhauled due to waiting time. Last service history: It was stated that there was a problem with the injection ratio. It has been reported that there is no electricity to the proportional valve. The electronic card has been sent to the service. In the service check, we were told that the card was working without any problems. To sum up, it needs some maintenance

Description: working hours: approx. 41041 hrs. 3axis robot serial number: 2112257 IMM type: Thermoset IMM serial number: 51019359 clamping force: 160 tons production type: reflector screw type: BMC screw diameter: 35 mm barrel capacity: 115 cm3 max. spec. injection pressure: 1488 max. stroke opening: 950 mm max. mould thickness: 950 mm min. mould thickness: 300 mm tie bars distance horizontal: 520 mm tie bars distance vertical: 520 mm locating ring size FH: 200 mm locating ring size MH: 200 mm max. ejector stroke: 75 mm max. ejector layout: 205 mm QMC type: manual total installed power: 80 kW  , please also have a look at the video of this machine Approx. Onsite Dimension. (l x w x h): 1,800 x 4,600 x 3,100 mm, weight approx.: 11,700 kg

Description: Travel paths , X 900 mm, Y 1800 mm, Z ,2500 mm, C 0 to 90° pneumatic Including enclosure 1400 x 2400 x 2100 mm Conveyor belt 590 x 2540 mm, height-adjustable Approx. Onsite Dimension. (l x w x h): 4,500 x 1,500 x 3,000 mm, weight approx.: 550 kg

Description: closing force: ,1200 kN auger diameter: ,35 mm ejection stroke: ,160 mm batch volume: ,61,09 cm3 injection speed: ,288,6 cm3/s injection pressure: ,2429 bar Approx. Onsite Dimension. (l x w x h): 6,000 x 1,700 x 2,000 mm, weight approx.: 9,700 kg

- Krauss Maffei MC3 EK 200 EUR 450 - Krauss Maffei MC3 KR 103 EUR 450 - Krauss Maffei MC3 LV 200 + LVR 10 EUR 600 - Krauss Maffei MC3 PR 201 EUR 450 - Krauss Maffei MC3 PR 202 EUR 450 - Krauss Maffei MC3 PV 200 EUR 450 - Krauss Maffei MC3 EPR10 EUR 250 - Krauss Maffei MC3 EPR11 EUR 200 - Krauss Maffei MC3 VU100 EUR 200 - Krauss Maffei MC3 KMV2 EUR 250 - Krauss Maffei MC3 CPU100 EUR 250 - Krauss Maffei MC3 BT100 EUR 250 - Krauss Maffei MC3 IA100 EUR 200 - Krauss Maffei MC3 IE200 EUR 200 - Krauss Maffei MC3 GDC EUR 300 - Krauss Maffei MC3 EPR20 EUR 250 - Krauss Maffei MC3 FD100 EUR 350

CNC control, control panel, control panel, control unit, card slot, control cards, MC3 control, plug-in cards, circuit boards -Manufacturer: Krauss Maffei, MC3 control of plug-in cards, printed circuit boards from injection molding machine -Power Supply / Converter: Elba euro module PCD 315 CP -Insert card: Krauss Maffei KR100 -Plug-in card: Krauss Maffei PV104 -Insert card: Krauss Maffei LV100 2 pcs. -Installation card: Krauss Maffei EK200 -Insert card: Krauss Maffei EK100 -Plug-in card: Krauss Maffei SP400 -Installation card: Krauss Maffei PR200 -Individual components: see photos -Price / sale: complete -Dimensions: 485/270/320 mm -Weight: 12.9 kg

warehouse no.: 501284 manufacturer: KRAUSS MAFFEI Typ: Saeule Nr. 6400007 year of construction: new Column for pressure intensifier match to the machine size Krauss Maffei KM 110 and KM 125. Total there are 6 columns available, they are brand new and unused. Overall length 1138 mm, piston diameter 140 mm, rod diameter 95 mm. Krauss Maffei Order No. 6400007 detailed description: Column for closing side of size KM 110 and KM 125 are to check the dimensions drawings with exact measurements available.

RECONDITIONED KRAUSS MAFFEI KM 125 ATEX CENTRIFUGE REF.: C3553 Vertical basket bottom discharge reconditioned centrifuge with scraper on inertia plate with 4 dampers discs type ZPVL 25-45.6 Type KM 125 manufactured by KRAUSS MAFFEI. AISI 316L wetted parts. General characteristics: Manufactured by KRAUSS MAFFEI Model KM 125 Type Vertical basket bottom discharge centrifuge with scraper Material Stainless steel 316L Weight 6400 kg Technical characteristics: Download Por el fondo con rascador Basket diameter 1.250 mm Height basket 650 mm Max. load 650 kg Useful load 500 dm3 Max. rotational speed 900 rpm Engine 37 kW - 50 cv

CNC control, control panel, control panel, control unit, card slot, control cards, MC3 control, plug-in cards, printed circuit boards -Manufacturer: Krauss Maffei, MC3 control plug-in cards circuit boards from injection molding machine -Temperature controller card: Gossen Pantatherm DS 4 3 pieces -DC-DC converter: Elba euro module PCD 54 CP on plug-in board: Krauss Maffei AN 100 -Prop.amplifier: Bosch 0 811 405 015 / 0 811 405 002 / 0 811 405 099 - Plug-in card: Krauss Maffei SK201 -Individual components: see photos -Price/sale: complete -Dimensions: 480/215/H270 mm -Weight: 4.8kg

KRAUSS MAFFEI KM 110-520 C1 injection moulding machine was built in Germany in 2003. The machine used in production plants produces top-quality plastic products using the injection moulding method, which involves feeding a plastic material of sufficient plasticity into an injection mould, which is then clamped with a high force of 110 tonnes. To ensure the highest possible operating efficiency and productivity, the machine uses reliable components, such as a powerful screw with a diameter of 45 mm and an ejector with a force of 22 kN. The KRAUSS MAFFEI KM 110/520 C1 injection moulding machine weights 6000 kg. Technical data of the KRAUSS MAFFEI KM 110-520 C1 injection moulding machine - mould clamping force: 110 t (1100 kN) - mould opening force: 7 t (70 kN) - injection volume: 275 cm3 - injection capacity: 159 cm3/s - injection pressure: 1878 bar - injection weight: 250 g - p ...

Product: injection molding machine Rubric: injection moulding machines Make/model: Krauss Maffei KM 320-1900 C3 Year of construction: 1999 Krauss Maffei injection moulding machine Type: KM 320-1900 C3 control: MC4 year: 1999 Clamping unit Clamping force t 320 Gap mm: 920 Holm dimension mm: 710 x 710 min/max height mm: 380 Plate size: 1060 x 1095 Injection unit Screw diameter mm: Gr 70 injection weight: 954 Injection volume cm m³: 1048 Spray pressure bar: 1778 Dimensions and weights Dimensions Lxwxh m: 6.75 X 2.15 X 2.4 machine weight kg: 16,300 Miscellaneous C3 SYSTEM EUROMAP 12 interface

Make/model: Krauss Maffei KM 450-3500 C3 Year of construction: 2004 Krauss Maffei injection moulding machine Type: KM 450-3500 C3, ACCU control: MC4 year: 2004 Clamping unit Clamping force t 450 Gap mm: 1170 Holm dimension mm: 900 x 800 min/max height mm: 480 Plate size: 1270 x 1230 Injection unit Screw diameter mm: 80 Injection weight gr: 1544 Injection volume cm m³: 1754 Spray pressure bar: 2205 Dimensions and weights Dimensions Lxwxh m: 7.98 x 2.35 x 2.55 machine weight kg: 26,000 Miscellaneous C3 system EUROMAP 12 interface

This Krauss Maffei PX 121-540 injection moulding machine was made in the year 2017. It is equipped with a Krauss Maffei MC6 control unit. The machine has a clamping force of 1200 kN and screw diameter of 40 mm.

used spare part IMM - Column warehouse no.: 501285 manufacturer: KRAUSS MAFFEI Typ: Saeule year of construction: neu Column for intensifier match the machine size Krauss Maffei 501285 There are a total of 6 columns available, they are brand new and unused. Total length 965 mm, diameter 124 mm piston, piston rod diameter 85 mm.

KRAUSS MAFFEI KM 110-520 C1 warehouse no.: 503020 manufacturer: KRAUSS MAFFEI type: KM 110-520 C1 controller: MC4 year of construction: 2003 technical data clamping unit clamping force: 1100 kN distance between tie bars h:: 470 mm distance between tie bars v:: 470 mm size of mould plates h: 745 mm size of mould plates v: 770 mm min. mould height: 300 mm max. open daylight: 900 mm opening stroke: 600 mm ejector stroke: 150 mm ejector force: 22 kN centering diameter of moving platen: 125 mm centering diameter of fixed platen: 125 mm weight of mould: 1485 kg technical data injection unit screw diameter: 40 mm swept volume: 217 ccm injection pressure: 2377 bar screw length: 23 l/d screw speed: 307 min plasticising rate: 22 g/s PS injection rate into the open: 126 g/s PS number of heating zones: 5 measures & weight measures of machine lxbxh: 4.4m x 1.5 ...

USED KRAUSS MAFFEI HZ 630 PH CENTRIFUGE REF.: C6486 General characteristics: Manufactured by KRAUSS MAFFEI Model HZ 630 Ph Technical characteristics: Basket diameter 630 mm Max. rotational speed 2400 rpm

USED KRAUSS MAFFEI HZ125 CENTRIFUGE REF.: C6484 General characteristics: Manufactured by KRAUSS MAFFEI Model HZ 125 Technical characteristics: Basket diameter 1250 mm Max. rotational speed 1220 rpm

USED KRAUSS MAFFEI HZ 63 SI CENTRIFUGE REF#: C6483 General characteristics: Manufactured by KRAUSS MAFFEI Model HZ 63 Yes Caractéristiques techniques : Densité admissible du produit : 1250 kg/m3. Température du produit : 50 ºC Technical characteristics: Basket diameter 630 mm Max. rotational speed 2400 rpm

Krauss-Maffei SPA 12/25 RP Manufacturer: Krauss-Maffei Type: SPA 12/25 RP Type: Hydraulic power pack Complete plant closure, wide range of mezzanine floors, pallet racks, shelving racks, paternosters. High-quality industrial machines, lathes, grinding machines, hand machines More items - new and used - can be found in our shop! International shipping costs on request!

Fully hydraulic closing system, MC 4 control system with color monitor, integrated control panel and built-in disc drive. 1 complete plasticizing system for thermoplastics with a screw diameter of 45 mm - Levels for the foundation of the Nolato machine - Hydraulic blockade of reverse rotation of the auger - Hydraulic auger drive with standard speed - SVO open nozzle in 2-piece design (nozzle body with screw-in nozzle). - A device for sorting good and defective parts. Pneumatic pendulum. Pendulum speed approx. 3 sec. Free-standing device under the machines discharge shaft. Including electrical standard connector and software (Pos. 42.42). - Single pneumatic valve on the movable mold clamping plate for the blowing function (1 piece of 3/2 separating valve with 1 magnetic coil). Control to choose between road/time or time/time. Possibility to manually set the flow using 1 thrott ...

Krauss Maffei KM 2000-17200 MX Injection Molding Machine Krauss Maffei robot - LR 500 Year of production - 2007 Hydraulic-mechanical double-plate locking system with 4 pressure cushions and 4 locking units on the movable plate. PV - adjustment of the injection unit. MC 5 - PC - (Pentium) control system with TFT colour monitor, integrated control panel and USB data carrier. Plasticizing system Complete plasticizing system for thermoplastics with HPS-AT screw diameter 150 mm TECHNICAL DATA Clamping unit - mould clamping force: kN 20000 - mould opening force: kN 1400 - Dimensions of the mounting plate (H x V): mm 2650 x 2400 - Clearance between columns (H x V): mm 1870 x 1620 - mould opening stroke: mm 2800 - mould height (min-max.): mm 800 – 1700 - Opening width: mm 3600 - ejector stroke: mm 400 - ejector force: kN 400/200 Injection Unit - screw diameter: mm 150 Cetb ...

This used Krauss-Maffei KM 300-1400-390-3-CZ, manufactured in 2003, comes fully equipped with new operation-specific software, updated hydraulic plans, and precision injection units for enhanced performance. Key features include a comprehensive electrical installation, a detailed locking unit, a robust machine bed design, and a state-of-the-art cooling system. Additionally, it includes a hydraulic ejector system and transport lock for safety and reliability. Operating instructions are available in Spanish and German. Seize the opportunity to buy this Krauss-Maffei KM 300-1400-390-3-CZ injection moulding machine for top-notch manufacturing efficiency. Contact us for more information.

Key data: 1600 kN

Krauss Maffei KM 160-750 CX with the Sepro Industrial Robot SDR 22S robot / hybrid machine / operating hours: approx. 34,000 h in automatic mode Year of construction: 2014 Injection unit: Screw diameter: 45 mm Spray weight: 289 g Injection pressure: 2336 bar Dosing volume: 318 ccm Clamping unit : Clamping force: 160 t Tie bar spacing: 520x520 mm Size of clamping plates: 820x845 mm Ejector: hydraulic Clamping unit: hydraulic Control: MC6 - Touchscreen Additional equipment: Very good technical condition Hybrid machine: high-speed, energy-saving and very quiet Operating hours: approx. 34,000 h in automatic mode Euromap 67 Robot Interface Air valve x 2 Hydraulic core pull x 1 Control with hot runners Injection unit hardened - Bimetal Main motor of the machine - servo motor driven by inverter - energy saving Machine with cylinder / battery with compressed nit ...

Key data: 1100 kN

Krauss Maffei KM 110-700 C2 Year of construction: 1998 Injection unit: Screw diameter: 45 mm Spray weight: 278 g Injection pressure: 2336 bar Dosing volume: 305 cc Clamping unit: Clamping force: 110 t Tie bar spacing: 470x470 mm Size of clamping plates: 745x770 mm Ejector: hydraulic Clamping unit: hydraulic Control: MC IV Additional equipment: Machine in very good technical condition Euromap 12 Robot Interface Air valve x 1 Hydraulic core pull x 1 Hot runner control x 12 Injection unit hardened - Bimetal Parallel Movements Proportional valve on the injection unit – precise injection Machine with cylinder / battery with compressed nitrogen (extra charge for fast working) The machine was regularly serviced by the authorized service Krauss Maffei in Switzerland Metrics: Weight: 6200 kg Length/Width/Height: 4.66x1.51x2.19 m Drive: Pumps/motor: 18.5 ...

Key data: 350 kN

Krauss Maffei KM 35-55 CX / machine in very good technical condition Year of construction: 2008 Injection unit: Screw diameter: 18 mm Injection weight: 18 g Injection pressure: 2500 bar Dosing volume: 20 ccm Clamping unit : Clamping force: 35 t Tie bar spacing: 320x320 mm Size of clamping plates: 540x540 mm Ejector: hydraulic Clamping unit: hydraulic Control: MC V - Touchscreen Additional equipment: Machine in very good technical condition Euromap 67 Robot Interface Air valve x 2 Hot runner control x 6 Injection unit hardened - Bimetal The machine was regularly serviced by the authorized service Krauss Maffei in Germany It is possible to change the screw diameter for fi 20 mm, 22 mm Metrics: Weight: 2600 kg Length/Width/Height: 3.50x1.40x1.70 m Drive: Pumps/motor: 11 kW Heating capacity: 3.78 kW Total power: 14.78 kW All offered machines are st ...

Krauss Maffei KMD120 extruder - efficient - year of manufacture 2002 - Screw diameter: 120 mm parallel - L/D: 23 - capacity: 600 - 700 kg/h - the scope of general renovation in 2011 carried out in our company - new AC 90 kW motor, controlled by a new vector inverter - new control cabinet equipped with new heaters, new housings, new fans, - new thermoregulation cabinet equipped with SSR + new regulators - new plasticizing system, - number of heating zones: cylinder (5), connector (1), head (3) - reducer after reconditioning - drive synchronization system: extruder, dispenser - equipped with a pressure and temperature sensor. -Dimensions; length x width x height = 530160170cm + hopper - Extrusion axis 1200mm

Manufacturer Krauss Maffei Type KM 800-8000 MC Control MC4 Built in 1999 Closing unit Closing force t 800 Opening path mm 2000 Holm size mm 1120 x 1000 Installation height min/max mm 600/1100 Plate size 1600 x 1510 Spraying unit Screw diameter mm 130 Spray volume cm3 6172 Spray weight gr 5617 Spray pressure bar 1296 Dimensions and weights Dimensions LxWxH m 10.6 x 2.9 x 2.4 Machine weight Kg 47000 Other robot core pulls

Manufacturer Krauss Maffei Type KM 250-1200 B Control MC 3 Built in 1990 Closing unit Closing force t 250 Opening path mm 820 Holm size mm 630 x 560 Installation height min/max mm 330 Plate size 900 x 830 Spraying unit Screw diameter mm 60 Spray volume cm3 678 Spray weight gr 610 Spray pressure bar 1778 Dimensions and weights Dimensions LxWxH m 8.28 x 2.24 x 2.35 Machine weight Kg 12600 Other

Manufacturer Krauss Maffei Type KM 200 - 620 B Control MC 3 Built in 1989 Closing unit Closing force t 200 Opening path mm 750 Holm size mm 560 x 500 Installation height min/max mm 300 Plate size 830 x 770 Spraying unit Screw diameter mm 50 Spray volume cm3 377 Spray weight gr 339 Spray pressure bar 1638 Dimensions and weights Dimensions LxWxH m 7.10 x 1.70 x 2.30 Machine weight Kg 9500 Other 2 x Core pulls 3 x Air valves robot interface

Krauss Maffei Type: KM 140-700 C3 Sprinter, with IML Robot Control: MC 4 Built: 2000 Closing unit Clamping force t: 140 Holm size mm: 470 x 470 Installation height min/max mm: 300 plate size: 745 x 770 Spraying unit Screw diameter mm: 50 Spray weight gr: 346 Spray volume cm3: 377 spray pressure bar: 1892 Dimensions and weights Dimensions LxWxH m: 4.8 x 1.8 x 2.2 Machine Weight Kg: 6800 Other with IML Robot 2 Cover, Euromap 12

Krauss Maffei KM 450-2700 C3 Clamping force 450 Ton Distance between columns : 900 mm x 800 mm Number of working hours : 55.000

Krauss Maffei EX 160/180 injection molding machine Year of production 2012 Clamping force 160 tons Screw diameter 22 mm. (Possibility of replacing the screw up to a diameter of 35 mm.) Number of hours worked: 20,068 h

Krauss Maffei hose pouring machine type: KM 110-700 C1 control: MC 4 construction year: In 1998 Schliesseinheit Schliesskraft t: 110 cross-beam measures mm: 470 installation height min / max. mm: min 300 record sizes: 745 x 770 hose unity snail diameter mm: 50 hose weights gr: 343 hose volumes cm?: 377 hose pressure cash: In 1892 mass and weights dimensions LxBxH m: 4.6 x 1.4 x 2.1 machine weights kg: 7000 other 2 x nuclear train, accumulator, new hydraulic tubes, Hydromotor anew. Heisskanal 4 zones

Krauss Maffei KM90/50-190 CD injection molding machine The machine was working in a CD production line

Injection moulding machine Krauss Maffei KM200-1400C1 Clamping force 200 Ton Distance between columns : 550 cm x 550 cm

Krauss Maffei hose pouring machine type: KM 650-4350 BM, with Robo control: MC 3 construction year: In 1993 Schliesseinheit Schliesskraft t: 650 opening ways mm: In 1750 cross-beam measure mm: 1000 x 900 installation heights min / max. mm: 600 record size: 1430 x 1350 hose unity snail diameter mm: 85 hose weights gr: In 1965 hose volumes cm?: 2195 hose pressure cash: In 1993 mass and weights dimensions LxBxH m: 12.5 x 2.50 x 2, 3 machine weights kg: 35.000/12.000 other Neureder robot

Manufacturer Krauss Maffei Model KM 350-1650 B1 Year 1995 Located in Turkey Machine can be seen in working condition 350 Ton

Injection moulding machine Krauss Maffei KM200-750CX Machine is in good condition Clamping force 200 Ton

injection molding machine KRAUSS MAFFEI EX 160/180 injection molding machine Number of hours worked: 20,068 2012

Krauss Maffei injection moulding machine Type: KM 650 / 8000 BM control: MC 3 year: 1992 Clamping unit Clamping force t 650 Gap mm: 1150 Holm dimension mm: 1000 x 900 min/max height mm: 600 / -. Plate size: 1430 x 1350 Injection unit Screw diameter mm: Gr 115 injection weight: 4345 Injection volume cm m³: 4830 Spray pressure bar: 1656 Dimensions and weights Dimensions Lxwxh m: 13.1 x 3.1 x 2.4 machine weight kg: 52,000

Krauss Maffei KMD 130-23 extruder Capacity : 1 Ton per hour Suitable for granule

Krauss Maffei KMD 2-110 PVC Extruder Machine Hourly capacity : 450-600 KG PLC Control

Krauss Maffei injection moulding machine Type: KM 800 / 4350 BM, with Neureder robot control: MC 3 year: 1993 Clamping unit Clamping force t 800 Gap mm: 1245 Holm dimension mm: 1000 x 900 min/max height mm: 705 /. Plate size: 990 x 1380 injection unit Screw diameter mm: 85 Injection weight gr: 1965 Injection volume cm m³: 1820 Spray pressure bar: 2185 Dimensions and weights Machine weight kg: 38,000/12,000 Other 2 core pull, Neureder robot system

KRAUSS MAFFEI KM 80-220 C1 2002 , screw 35 mm clamping force 80 ton in production

Krauss Maffei injection moulding machine Type: KM 280-1400 C3 control: MC 4 year of construction: 2002 Clamping unit Clamping force t 280 gap mm: 820 Holm dimension mm: 630 x 630 min/max height mm: 330 Plate size: 995 x 1050 injection unit Screw diameter mm: Gr 60 injection weight: 617 Injection volume cm 3: 678 spray pressure bar: 2007 Dimensions and weights Dimensions Lxwxh m: 6.1 x 2.2 x 2.3 machine weight kg: 14,200 Miscellaneous 1 core pulling robot interface battery Highspeedmachine

Krauss Maffei injection moulding machine Type: KM 650-3500 C2 control: MC 3F built: 1997 Clamping unit Clamping force t: 650 gap mm: 1150 Holm dimension mm: 1000 x 930 min/max height mm: 600 / 1750 Plate size: 1510 x 1370 injection unit Screw diameter mm: 90 injection weight gr: 2605 Injection volume cm 3: 1777 spray pressure bar: 1742 Dimensions and weights Dimensions Lxwxh m: 10 x 2.8 x 2.7 machine weight kg: 35,000 Miscellaneous Core pull 4 EUROMAP 12

Used Krauss Maffei 150-700 C1 Injection moulding machine From 1998 Without robot Machines is functional and in production, can be seen anytime by appointment. PDF attached.

Used Krauss Maffei 280-1900 C3 Injection moulding machine From 2000 Equipped with Wittmann robot W631-0386/2003 Machines is functional and in production, can be seen anytime by appointment. PDF attached

Krauss Maffei injection moulding machine Type: KM 320-1400 C3 control: MC4 year: 2000 Clamping unit Clamping force t: 320 gap mm: 920 Holm dimension mm: 710 x 710 min/max height mm: 380 Plate size: 1060 x 1095 injection unit Screw diameter mm: 60 injection weight gr: 617 Injection volume cm 3: 678 spray pressure bar: 2007 Dimensions and weights Dimensions Lxwxh m: 6.8 x 2.2 x 2.4 machine weight kg: 16,300

Krauss Maffei LRX-S 150-0956 X-axis dimension 900 mm Y-axis dimensions 1400 mm Z axis dimension 2500 mm Lift capacity 15 kg C-steering axles Servo drive