kraus maffei press used for sale

Key data: 600 t

Max Tool length: 3000mm Max Tool Width: 2000mm Min Tool Height: 500mm Total Tool Weight: 20,000kg Max Closing Speed: 400 mm/sec

Injection unit Krauss Maffei size 700 complete with screw cylinder 50 mm Ã?, complete with all valves and servo motor

warehouse no.: 501284 manufacturer: KRAUSS MAFFEI Typ: Saeule Nr. 6400007 year of construction: new Column for pressure intensifier match to the machine size Krauss Maffei KM 110 and KM 125. Total there are 6 columns available, they are brand new and unused. Overall length 1138 mm, piston diameter 140 mm, rod diameter 95 mm. Krauss Maffei Order No. 6400007 detailed description: Column for closing side of size KM 110 and KM 125 are to check the dimensions drawings with exact measurements available.

used spare part IMM - Column warehouse no.: 501285 manufacturer: KRAUSS MAFFEI Typ: Saeule year of construction: neu Column for intensifier match the machine size Krauss Maffei 501285 There are a total of 6 columns available, they are brand new and unused. Total length 965 mm, diameter 124 mm piston, piston rod diameter 85 mm.

- Krauss Maffei MC3 EK 200 EUR 450 - Krauss Maffei MC3 KR 103 EUR 450 - Krauss Maffei MC3 LV 200 + LVR 10 EUR 600 - Krauss Maffei MC3 PR 201 EUR 450 - Krauss Maffei MC3 PR 202 EUR 450 - Krauss Maffei MC3 PV 200 EUR 450 - Krauss Maffei MC3 EPR10 EUR 250 - Krauss Maffei MC3 EPR11 EUR 200 - Krauss Maffei MC3 VU100 EUR 200 - Krauss Maffei MC3 KMV2 EUR 250 - Krauss Maffei MC3 CPU100 EUR 250 - Krauss Maffei MC3 BT100 EUR 250 - Krauss Maffei MC3 IA100 EUR 200 - Krauss Maffei MC3 IE200 EUR 200 - Krauss Maffei MC3 GDC EUR 300 - Krauss Maffei MC3 EPR20 EUR 250 - Krauss Maffei MC3 FD100 EUR 350

Berstorff Three Roll Calender Manufacturer: Krauss Maffei Berstorff 2650mm wide x 650mm (26”) diam. Effective working width 2600mm (Roller Head Die Width) Rolls Configuration: ‘I’ shape Rolls Type: Peripherally Drilled Drive: Right Hand Transmission: Direct Drive by Cardan Shafts Motors: 3X 75 KW, 2600 RPM, 50 Hz Nip Adjustment: Hydraulic (Berstorff patented) Fixed roll: Roll 2 (middle roll) Adjustable roll: Roll 1 and 3 (upper and lower roll), Max Roll gap is 80 mn Cross axis: Roll 1, 2 and 3, Hydraulic operated, max. 25 mm Pre-loading & Roll Bending: Available Rolls Speed: Variable, 0.5-10 m/ min Bearings: Antifriction Roller Bearings Electricals/ Controls: PLC Complete with motor and controls Year 2009

Key data: 500 , 30

Krauss Maffei KM 50 / 160 C2 Operating hours approx. 47,500 Core train Operational data collection (function uncertain, was not used by us) Various power connections Screw diameter D=30mm Condition: good / Ready to use without funnel

Manufacture Krauss Maffei Type KM 350-1900C2 Year prod../ no. manufacture 2001/354332 Diameter of screw mm 60 Shot volume g 700 Presure bar 2420 Clamping force kN 3500 Mould fixing platen size mm 1060 x 1095 Distance between tie bars mm 710 x 710 Mould height - max. mm 380 Opening stroke mm 920 Max odległość pomiędzy płytami mm 1600 Control MC 4 Weight kg 16.000 Additional Hydraulics cores - 4 pcs. // Bottle with ntrogen

Key data: 1100 , 198 , 40

Manufacturer: Krauss Maffei Type: KM 110 - 520 C2 Year of construction: 2003 Control: MC 4 Closing force: 1100 kN Closing type: Hydraulish Tie bar spacing: 470 mm x 470 mm Plate size: 745 mm x 770 mm Tool height: min 300 mm Opening distance: 600 mm Plate spacing max.: 900 mm Screw: 40 mm Lifting volume: 217 ccm Injection weight PS: 198 gram HP Injection pressure: 2377 bar general Engine: 18.5 kW Heating: 13 kW Dimensions: 4.5 m x 1.5 m x 2.2 m Weight: 6000 kg Screen text: German / English Additional equipment Robot interface Core train: x1 Accu

clamping force: 4200 kN injection volume: 572 - 1716 cm³ screw diameter: 90 mm platen size: 1040 x 1040 mm closing stroke: 620 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

USED KRAUSS MAFFEI HZ 630 PH CENTRIFUGE REF.: C6486 General characteristics: Manufactured by KRAUSS MAFFEI Model HZ 630 Ph Technical characteristics: Basket diameter 630 mm Max. rotational speed 2400 rpm

RECONDITIONED KRAUSS MAFFEI KM 125 ATEX CENTRIFUGE REF.: C3553 Vertical basket bottom discharge reconditioned centrifuge with scraper on inertia plate with 4 dampers discs type ZPVL 25-45.6 Type KM 125 manufactured by KRAUSS MAFFEI. AISI 316L wetted parts. General characteristics: Manufactured by KRAUSS MAFFEI Model KM 125 Type Vertical basket bottom discharge centrifuge with scraper Material Stainless steel 316L Weight 6400 kg Technical characteristics: Download Por el fondo con rascador Basket diameter 1.250 mm Height basket 650 mm Max. load 650 kg Useful load 500 dm3 Max. rotational speed 900 rpm Engine 37 kW - 50 cv

USED KRAUSS MAFFEI HZ 63 SI CENTRIFUGE REF#: C6483 General characteristics: Manufactured by KRAUSS MAFFEI Model HZ 63 Yes Caractéristiques techniques : Densité admissible du produit : 1250 kg/m3. Température du produit : 50 ºC Technical characteristics: Basket diameter 630 mm Max. rotational speed 2400 rpm

We can offer a Krauss Maffei injection moulding machine, manufactured in 2017, short time working, like new one, serious buyer contact us. We have many brands, models,years machines, tell me what you need seriously!

USED KRAUSS MAFFEI SZ 92 PUSHER CENTRIFUGE

USED KRAUSS MAFFEI SZ 92 PUSHER CENTRIFUGE

Key data: 500 , 77 , 30

Manufacturer: Krauss Maffei Type: 50 - 220 C Built: 2001 Control: MC4 Closing force: 500 kN Tie bar distance: 321 mm x 321 mm Plate size: 540 mm x 540 mm Tool installation height: min 200 mm Opening distance: 350 mm Plate spacing max.: 550 mm Screw: 35 mm Lifting volume: 101 ccm / 92 gram HP Spray pressure: 1488 bar General Engine: 11 kW Heating: 9 kW Dimensions: 3.3 m x 1.3 m x 1.8 m Weight: 2500 kg Screen text: English / English Additional equipment Core pull x1 Air valve x1 Accu Hot runner control

Manufacturer: Krauss Maffei Type: KM 650-3500-700 CZ Year of construction: 2007 Control: MC 4 Clamping unit: Clamping force: 650 t Opening distance: 1150 mm Tool installation height min.: 600 mm plate spacing : 1750 mm Tie bar distance (h x v): 1100 x 900 mm Panel dimensions (h x v): 1510 x 1370 mm Centering (nozzle ejector plate): 200 / 200 mm 1.Injection unit: Screw diameter : 80 mm Injection weight in hp. Max. : 1400 g Displacement: 1543 cc Injection pressure: 2205 bar 2. Injection unit: Screw diameter: 45 mm Injection weight in polystyrene: 278 g Displacement: 305 cm³ Injection pressure: 2,336 bar Accessories: 2 x Air valve 16-fold cascade 3 x core pull on BWAP 3 x core pull on FWAP 20 x hot runner control units Robot interface: Euromap 67 Metrics: Total weight: 34,500 kg Total size L x W x H: 7.8 x 2.5 x 2.5 m Operating hours: 45400 h  ...

Krauss-Maffei SPA 12/25 RP Manufacturer: Krauss-Maffei Type: SPA 12/25 RP Type: Hydraulic power pack Complete plant closure, wide range of mezzanine floors, pallet racks, shelving racks, paternosters. High-quality industrial machines, lathes, grinding machines, hand machines More items - new and used - can be found in our shop! International shipping costs on request!

Stock No. 2680 1x partially overhauled and functionally tested Compounding extruder double screw, co-rotating intermeshing Segmented screws and cylinder barrel (water cooled) Screws 2x 64 mm - 40 L/D Screw speed up to 1200 rpm-1 Drive 482 kW-DC Gearbox Flender safety coupling atutomatik 3x degassing venting ports ( vacuum pump optional for extra charge ) 2x side feeding dosing extruder type ZSFE 50 twin screws with dm 48.5 mm with 4 kW each, speed up to 800 rpm.-1 Control cabinet with Siemens HMI Touch OPTIONAL at extra cost: 1) Screen-pack-changer changer 2) Vacuum pump 3) Pelletizing: ST strand, - WRG waterring or - UWP underwater pelletizing system 4) Granulate classifying sieve 5) gravimetric loss-in-weight blender / dosing system 6) Material conveying 7) Big-bag filling station 8) Start-up by our technicians Visit to our factory in Wuppertal.  ...

Krauss Maffei PET Machine with Milk neck finish mold 27.5G 48cav 450-4500 CS PET 450Ton year 2010 Mold 27.5Grams 38mm Milk neck finish (requires attention) 48 cavities 25sec cycle Can be inspected

Power supply, power converter, power supply unit, switching power supply, MC3 controller -Manufacturer: Krauss Maffei, power supply unit from injection molding machine -Type: NT 100 -Dimensions: 260/140/H130 mm -Weight: 5 kg

Berstorff 6inch (150mm) Strainer Extruder Manufactured by: Krauss Maffei Berstorff Model: GE 150 K Screw Diameter: 6"/150 mm L/D Ratio: 6 Speed: Variable, up to 45 rpm Motor: 90 KW, 1500 RPM Transmission: Direct Drive, 3 steps reduction Gear Reduction Ratio: 33:1 Year 2009

Key data: 1300 kN, 40 mm

Stock No.: 503267 Manufacturer: KRAUSS MAFFEI Type: KM 130-380 CX Control: MC5 Year of construction: 2007 Hours: 48294 h Clamping force: 1300 kN Holm dimension v: 525 mm Holm h: 525 mm Plate size h: 820 mm Plate size v: 845 mm Min. installation height: 300 mm Plate dread max.: 900 mm Aperture travel: 600 mm Screw diameter: 40 mm Displacement: 201 ccm Spray pressure: 1860 bar Machine dimensions LxWxH: 5.7m x 1.6m x 2.1m Total Weight: 7800KG Equipment On-screen text German CEE socket 16A Core hoist hydraulic 2x Air valve 1x Air valve 2x Machine with water battery Machine without material hopper Machine without suction conveyor Levelling elements Interface EUROMAP 67 Interface for coloring device Selection Unit

Inv. Num. : 5875 Type: KM 300-1400 C1 Producer: Krauss Maffei Created: 2001 Parameters: Laser ON: 70,000 h Clamping force: 300 t Screw diameter: 60 mm Injection capacity: 679 cm³ Injection mass: 618 g Min. height of clamping plate: 995 mm Min. width of clamping plate: 1050 mm Distance between uprights (horizontal): 630 mm Distance between uprights (vertical): 630 mm Ejector stroke length: 200 mm Maximum spraying pressure: 2000 bar Pump power: 45 kW Opening the mold: 820 mm Machine length: 6000 mm Machine width: 2100 mm Machine height: 2400 mm Injection weight: 12,500 kg Equipment: Robot Getecha Aschaffenburg GL 5 (built in 2001)

B&A REF: 9023 TON: 80 SHOT WEIGHT: 140 SCREW DIAMETER: 35MM STROKE VOLUME: 183CM3 INJECTION PRESSURE: 2429AR PLATEN SIZES: 560 X 510MM DBTB: 420 X 370MM MIN MOULD HEIGHT: 150MM MAX MOULD HEIGHT: 400MM MOULD OPENING STROKE: 350MM MAX DAYLIGHT: 750MM EJECTOR STROKE: 150MM CONTROLS: MC 6 CORE PULLING: 2 AIR VALVES: 2 HEATING CAPACITY: 14.2W ROBOT INTERFACE: EUROMAO 67 ROBOT: GEIGER TECNOMATIC SCREW DRIVE: ELECTRIC HOT RUNNER: 12 ZONES

Key data: 500 kN, 25 g/PS, 18 mm

Cleaned, checked, repaired machine, ready for production. 50 tons clamping force, 320x320 column spacing. 18 screws, 25 cm3 injection volume. 1 core puller, 1 air circuit. The display language is German or English. The manual is in German. The machine is in very good condition, it can be inspected during operation. A video of his farm was also made. Check out our other ads.

B&A REF: 9053 TON: 80 SHOT WEIGHT: 183 SCREW DIAMETER: 40MM STROKE VOLUME: 201CM3 INJECTION PRESSURE: 1860AR PLATEN SIZES: 670 X 670MM DBTB: 420 X 420MM MIN MOULD HEIGHT: 250MM MOULD OPENING STROKE: 500MM MAX DAYLIGHT: 750MM EJECTOR STROKE: 150MM CONTROLS: MC5 CORE PULLING: 1 AIR VALVES: 1 MOTOR: 15 HEATING CAPACITY: 8.12KW ROBOT INTERFACE: EUROMAP 67 SCREW DRIVE: HYDRAULIC

Key data: 2500 kN, 618 g/PS, 60 mm

Krauss Maffei 250-1400CX Injection Molding Machine with Robot and Gas Boost (225) Item number: 225 Availability: In stock Year of Make: 2016 Brand: KRAUSS MAFFEI Specifications Injection weight: 618 g Injection flow: 848 cc/s Clamping force: 2,500 kN Screw diameter: 60 mm Spray pressure: 2005 bar Tiebar spacing: 630x630 mm Clamping plate size: 1135x1180 mm Tool installation height min.: 330 mm Plate spacing max: 1150 mm Control: MC6 Language: German Power: 70 kW Hours: 23170 h Weight: 15000 kg Dimensions: 6.5x2.3x2.3 m Funnel: No Core Pull: Yes Euromap: Yes Air Valve: Yes Heating Ducts: Yes Gas storage: Yes

2016 KRAUSS MAFFEI 110-380 CX Injection molding machine Machine was functional before conservation, for reuse is neccesary aditional checks and possible repair activities. Find more here - / Contact us at -

2008 KRAUSS MAFFEI 650-1000-520 CZ Injection moldin machine Missing electrical and mechanical parts. Find more here - / Contact us at -

Key data: 800 kN, 45 mm

KRAUSS MAFFEI KM 80-750 CX Stock No.: 503569 Manufacturer: KRAUSS MAFFEI Type: KM 80-750 CX Control: MC6 Year of Make: 2012 Operating hours: 34000 h Technical data closing page Clamping force: 800 kN Wooden dimensions h x v: 420 x 420 mm Panel size h x v: 670 x 670 mm Min. installation height: 250 mm Max. installation height: 500 mm Plate spacing max.: 750 mm Opening travel: 500 mm Ejector stroke: 150 mm Ejector force: 23 kN Centering of movable plate D: 125 mm Centering of fixed plate D: 125 mm Tool weight: 1000 kg Technical Data Spray Side Screw diameter: 45 mm Displacement: 318 cc Spray pressure: 2336 bar Screw length: 22 l/d Screw speed: 355 min Outdoor injection flow: 143 g/s PS Number of heating zones: 5 Dimensions & Weight Machine dimensions LxWxH: 4.5m x 1.5m x 2m Total Weight: 3900KG Equipment Screen text German Core pull hydraulic 1x M ...

Manufacturer KRAUSS MAFFEI Type KM 200-700 C1 M. Year 2005 • Dimensions(LxWxH) 5600x1900x2200 • Weight 11000 kg Injection molding machines are used for manufacturing parts from different plastics in a wide range of colors, shapes and sizes. Processing of thermosetting plastics involves transforming the initial material in the machine into a plastic state by heating it and injecting it under pressure into a closed shape (mold) and removing it from the mold after a cooling phase. Find more here - / Contact us at -

2008 KRAUSS MAFFEI 650-1000-520 CZ Injection moldin machine Machine was functional before conservation, for reuse is neccesary aditional checks and possible repair activities. Find more here - / Contact us at -

2008 KRAUSS MAFFEI 650-1000-520 CZ Injection moldin machine Machine was functional before conservation, for reuse is neccesary aditional checks and possible repair activities. Find more here - / Contact us at -

2008 KRAUSS MAFFEI 420-700-520 CZ Injection moldin machine Machine was functional before conservation, for reuse is neccesary aditional checks and possible repair activities Find more here - / Contact us at -

2008 KRAUSS MAFFEI 175-520-390 CZ Injection moldin machine Machine was functional before conservation, for reuse is neccesary aditional checks and possible repair activities Find more here - / Contact us at -

The Stanzeinrichtung CutStar V2 XL is a stamping and punching machine designed for industrial applications. With its robust build and advanced technology, this machine is ideal for precise cutting, shaping, and forming operations. Weight: 12600 kg Dimensions (L x W x H): 3220 mm x 2750 mm x 3600 mm Connection Voltage: 25 kW Operating Pressure Hydraulic (Max/Min): 140 bar / -- bar Operating Pressure Pneumatic (Max/Min): 10 bar / -- bar Operating Voltage: 230/400 V Frequency: 3 x 400 V / 50 Hz Find more here - / Contact us at -

The Stanzvorrichtung TrimStar 250kN is a high-performance stamping machine designed for precision and efficiency in manufacturing processes. This machine is tailored for heavy-duty applications, particularly in the automotive industry. Hydraulic Pressure: - Max Pressure: 180 bar - Operating Pressure: 150 bar Power: 25 kW Operating Frequency: 50 Hz Connection Voltage: 3 x 400 V Full Hydraulic System Installation Dimensions (L x W x H): 4700 mm x 2790 mm x 4850 mm Weight: 18,000 kg Find more here - / Contact us at -

We offer a Milling Machine Routing Star V that is an ideal choice for automotive component machining and other high-precision tasks. We have four machines available from different years ( 2012, 2014, 2017) Technical Data: Dimensions (L x W x H): 5600mm x 2990mm x 2950mm Weight: 8000 kg Power Rating: 12 kW Connection Power: 3 x 400 V, 50 Hz Hydraulic Working Pressure: Max (bar not specified) Pneumatic Working Pressure: Not specified Table Size: 1400mm x 700mm Table Type: Rotating Table Number of Robots: 2 Tool Changer: Yes Find more here - / Contact us at -

Description with hoist it changes molds

Key data: 5000 kN, 80 mm

KM 500/2700C2 Specifications Closing page: Clamping force: 5000 kN Wooden dimension h x v: 900 x 800 mm Min. installation height: 480 mm Plate spacing max.: 1650 mm Centering: 200 mm Tool weight: 7900 kg Splash Side: Screw diameter: 80 mm Capacity: 1433 cc Spray pressure: 1829 bar Equipment: MC 4 Control Core moves: 2+2

Clamping force: 2500kN, clear tie bar distance: 630mm/630mm, opening stroke: 1150mm, min. mold installation height: 330mm, screw diameter: 60mm, specific injection pressure: 2000bar, max. stroke volume: 670cm³, connected load: 74kW, control: MC4. Machine dimensions: 5700mm/2200mm/2300mm, machine weight: 12.5t, operating hours: 47,572h. Available from February 2025, including special accessories, Krauss Maffei LRX-S 100, 8x hot runner control points, 4x core pull, blow-out unit, pressure accumulator, hydraulic tie-bar pulling device, energy-saving circuit, ALS interface, 20mA interface and color dosing device interface. On-site inspection is possible, documentation available.

A total of 8 partly dismantled Krauss Maffei injection molding machines are available. 1) Krauss Maffei 175-520-390 CZ, year of manufacture: 2008. 2) Krauss Maffei 650-1000-520 CZ, year of manufacture: 2008. 3) Krauss Maffei 110-380 CX, year of manufacture: 2016. 4) Krauss Maffei 420-700-520 CZ, year of manufacture: 2008. 5) Krauss Maffei 650-1000-520 CZ, year of manufacture: 2008, missing electrical parts. 6) Krauss Maffei 650-1000-520 CZ, year of manufacture: 2008. 7) Krauss Maffei 850-1400-1000 MX Z, year of manufacture: 2012, missing electrical and mechanical parts. 8) Krauss Maffei 110-380 CX, year of manufacture: 2016, missing electrical parts. All injection molding machines include robots from Kuka, Krauss Maffei, Sar, or Sepro. On-site inspection is possible.

Flange diameter: 160mm, clamping force: 1600kN, tie bar distance: 520mm/520mm, min. mold diameter: 350mm, min. mold installation height: 300mm, opening stroke: 650mm, platen distance: 950mm, ejector stroke: 150mm. Screw diameter: 45mm, injection pressure: 2336bar, stroke volume: 318cm³, nozzle radius: 15mm, injection volume: 134cm³, injection weight: 289g. Machine dimensions X/Y/Z: approx. 4900mm/1600mm/2200mm, weight: approx. 7400kg, operating hours: approx. 71187h. The machine has an unknown defect. Documentation available. An on-site inspection is possible.

Two rolling mills for thermosetting plastics are available. 1) 2x identical rolling mills Berstorff (Krauss Maffei), year of construction: 1959, drive wheel renewal: 2000, working width: 1200mm, roll diameter: 400mm. 2) Big bag frame with electric chain hoist. 3) Suction blower. 4) Engelsmann screening plant. 5) Glass fiber dosing devices. 6) Conveying units, control system and screws. 7) Krauss Maffei test laboratory roller for color determination. Without shredding units. Documentation available. On-site inspection is possible.

Key data: 1250

KRAUSS MAFFEI 125 T Reference: 125-460 C1 Condition: good Technical Specifications: Clamping force: 125 T / 1250 KN Tie bar spacing: 470 x 470 mm Mold thickness (Min/Max): 300 - 600 mm Platen dimensions : 770 x 750 m Opening stroke: 580 mm Injection weight : 195 gr Injection pressure: 2112 bar Screw diameter: 40 mm L/D ratio: 20 Interface robot EUROMAP 12 Dimensions & Weight: Weight: 4 100 kg Overall dimensions (L x W x H): 4,50 x 1,50 x 2,20 m

Press force: 1100kN, screw diameter: 35mm, injection weight: 140g, stroke volume: 154cm³, injection pressure: 2429bar, max. barrel temperature: 375°C, weight: approx. 8000kg, control: MC 5 3.0, operating hours: 25271h, pump hours: 29098h. Including one linear robot KM LRX 150, travel X/Y/Z: 900mm/1200mm/3000mm, load capacity: 15kg. Documentation available. On-site inspection is possible.

Key data: 3000 kN, 900 g/PS, 60 mm

Injection molding machine Krauss Maffei Km 300 1400 C1 BJ 1998