kombi used for sale

pressure:15 t stroke:160 mm weight of the machine ca.:330 kg Oil tank capacity:10 l

cross-section width:: 100 mm cross-section heigth:: 40 mm feed:: 2 - 999.999,9 mm Condition: new, Specification: Impact knife cutting machine CC-600/40 for hoses and profiles - contact length: 600 mm - product diameter: 40 mm - belt width: 100 mm - Tractive force: 400 N to 800 N - Drive: 2 drives upper and lower belt - Conveyor belt speed: 100 m/min - Drive feed, cutting motor: Servo drives - Cutting capacity with blade max.: 4,000 1/min - Connected load: 3.5 kW - Dimensions L/H/B: 1,900 x 1,650 x 960 mm - Weight approx.: 580 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Baguette Long Scooter Kemper FR Kombi - Baguette long scooter from Kemper - Model FR COMBI - Stainless steel clad - with outlet table - can be driven on castors - 400 Volt 50Hz

Flame cutting machine, torch, oxy-fuel cutting machine, cutting torch, welding torch, hand cutting torch, welding set -Manufacturer: Zinser, Burner set in a metal box -Burner sizes: No. 00 to No. 4 (max. 9 mm) -Cutting torch: A -Accessories: see pictures -Dimensions case: 320/200/H65 mm -Weight: 2.8 kg

BAQUETTE MACHINE

width: 900 mm depth: 450 mm height: 1800 mm weight: 0,152 t High quality professional tool cabinet. This cabinet consists of two separate boxes that are mounted on top of each other can be. Both cabinets are 90 cm. high, 90 cm. wide and 45 cm deep. Both shelves are adjustable in height and can hold 150 kg each Shelves are loaded. The drawer cabinet is equipped with 6 drawers of 100 mm height. One Drawer is 200mm high. Max. load per drawer is 100kg. All drawers are centrally locked. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Used cable pelletizing system for mixed and stranded cables. The machine has been overhauled and equipped with new tools. The turbine was re-mounted and the control panel was replaced. In addition, the material inlet control has been activated so that the machine can be used automatically. The hourly output depends on the cable up to approx. 250 kg/hour when using a 5 mm sieve insert. The attached video shows the system in combination with the dosing tank and plastic loading. These components can be supplied as an option. It is operated via a 63 amp connection at 400 V. The power consumption is 28 kW. The plant can be visited and tested at our premises. More information at infoRecyclinganlagen.info

with computer control Band width: approx. 63cm Band length: 75cm extendable on one side to 110cm Different belt speeds Roll gap 0.5-45mm with trawl net and knitting board Machine completely stainless steel - Ribbons new - Tested and cleaned

Inv. Num. : 8441 Type: KOMBI 1000 Producer: Reckermann Generated: Parameters: Work table length: 1370 mm Work table width: 400 mm X-axis travel: 1000 mm Y-axis travel: 350 mm Travel Z axis: 450 mm

Flame cutting machine, torch, oxy-fuel cutting machine, cutting torch, welding torch, hand cutting torch, welding set -Manufacturer: Auka Rhöna, burner set in a tin box -Burner sizes: 2-4 / 4-6 / 6-9 mm -Cutting torch: -Accessories: see pictures -Dimensions case: 450/190/H55 mm -Weight: 2.9 kg

A complete combined gravure/immersion roller system for Chadwick wallpaper rolls is available. Working width: approx. 560mm, substrate: paper/fleece, gravure printing process: water-based, printing units: 7, technical output: 180m/min, realistic output: 140m/min, production output: approx. 13000-15000 rolls/24h. 1) Windmöller & Hölscher 892C unwinder, year of manufacture: approx. 1970s. 2) 7x Chadwick gravure printing units. 3) Under-paper unwinding and gluing station. 4) Lenze pulling station. 5) 2x Saueressig cold embossing stations, year of construction: 1986/1989. 6) 2-section continuous dryer, total length: approx. 8m. 7) Double roller cooling station. 8) Web monitoring system WV-Star 500, year of construction: 2016. 9) Aligning and cutting system Saueressig 200440Y, inscription: G9, year of construction: 1989. 10) Ritter automatic roller machine. 11) Turning station Saueressig 20 ...

Inv. Num. : 8609 Type: 1600 KOMBI Producer: NESSAP Generated: Parameters: Control system: NESSAP Software: WRYKRYS Work table length: 3000 mm Work table width: 1500 mm Minimum sheet thickness: 0.5 mm Maximum sheet thickness when cutting: 100 mm Plasma Source: Cebora 160A Cutting speed: 12 m/min

x-travel: 600 mm y-travel: 250 mm z-travel: 350 mm total power requirement: 5,5 kW Universal Production and Toolroom Milling Machine The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

hydraulic track marker, tramline control, drag coulter with trailing harrow, filling stairs, 12 cm row spacing / 34 coulters, with Unia Ares 400 short combination: 2 row height-adjustable tines, 1 cross kill roller, fifth wheel coupling system Weiste, Working width: 400, Year of construction: 1

General SKU354T1373 MakeSchroder Kombinator TypeVEMK 01/108-350 No.11/4053-1-182757 Year of construction2002 LocationBarneveld Main Features MaterialStainless steel Volume1.8 Ltr. Motor3 KW Specified Features - Scraped surface heat exchanger Mixercheck Capacity1,8Ltr. Scraped surface heatexchangers MaterialStainless steel 1.4571 (316Ti) General Floorspace1,7x0,65m Total height1,7m Weight380kg CEcheck Extra information Extra Specificationsthe interior is peg mill-based. this machine has been used for margerine / fat operating pressure: 25bar maximum temperature: 90°C capacity: 50-150kg/h used for post-treatment of grease. emulsifier / homogeniser OintmentsStarchGreen FridayCosmeticsFood additivesSugarScraped surface heat exchangersConfectioneryBeveragesBiopharmaceuticalAPIOils & fatSchröderIndustries > Pharmaceutical > OintmentsIndustries > Food & Feed > StarchGre ...

General SKU299X419 LocationBarneveld MakeCoperion Werner &: Pfleiderer GmbH Stuttgart Sizes Screw diameter120 mm Main Features Motor310 KW Inlet diameter200 mm L/D15 Specified Features - Double screw extruder Double screw extrudercheck Screw diameter120 mm L/D15 Co-rotatingcheck Electric heating4 Water coolingcheck DC-motor310kW, 440V, 1780rpm With variable speed drivecheck Screw speed365rpm Feeding with hoppercheck Feeding with metering screwSide feeder MaterialNitriding Steel 1.8550 General TypeKP-120/250 KombiPlast Compounder Mach.No.20493087 Year of construction2004 With switchgear(as is) Weight± 22.000 kg Extra SpecificationsComplete line with side-feeder, discharge screw and partially control cabinetinfo compounder:Krupp Werner &:amp: Pfleidere GmbHtyp: D315 EXTSingle screwscrew dia: 250 mmscrew lengte:1500 mm.screw van be heatedL/D: 6screw speed: 4,7 ...

General SKU311P700 MakeSchröder&:Co Maschinenfabrik (DE) LocationBarneveld Main Features MaterialStainless steel Motor2.2 KW Specified Features - Scraped surface heat exchanger Scraped surface heat exchanger:Cooler: Number of stages:1 Cylinder sizes+/- dia.80mm x350mm Max. temperature-20 degr.C. Inletdia.25mm (product), dia.25mm (Glycol) Outlet:missing:: Motor2,2 KW, 220/380 Volt With variable speed drivecheck With variable speed drivecheck MaterialStainless steel General No.23-232 Year of construction1984 Mounted on framecheck Mounted on wheelscheck With switchgearcheck Floorspace1,4x0,7 M Total height1,3 M Weight150 KG Extra information Extra Specificationscylinder size: dia. 80 mm x 350 mm OintmentsStarchGreen FridayCosmeticsFood additivesSugarScraped surface heat exchangersConfectioneryBeveragesBiopharmaceuticalAPIOils & fatSchröderIndustries > Pharmace ...

 Sheeting Machine Seewer Rondo Manufacturer : Seewer Rondo Type : Syn 603 Model : Kombi 613 Details see picture

Straightening machine, wire straightening machine, unwinder, straightening machine combination, pay-off reel, wire unwinder, double reel, reel, pay-off reel, motor-driven reel for wire processing, punch, eccentric press, hydraulic press, punching machine, motor reel, winding roll, unwinder, wire unwinder -Wire straightening machine: decoiler-straightener combination -Type:not visible -Note: without documentation -Engine: Fukota 1.5 kW -Straightening rollers: for Ø 20 mm, see photos -Receiving rollers: Ø 152/215 x 1330 mm -Total dimensions: 3040/2450/H2525 mm -Weight: 2080 kg

x-travel: 1000 mm y-travel: 450 mm z-travel: 450 mm table surface area: 1370 x 400 mm number of T-slots: 5 Stck. spindle turning speed range: 32 - 1500 U/min : mm/min feeds Z-axis: mm/min tool taper: SK 50 total power requirement: 7,0 kW weight of the machine ca.: 3,1 t dimensions: 2,1 x 1,7 x 1,9 m Milling machine with - Heidenhain TNC 135 - Rapid traverse - Milling head with hydraulic tool cutting - Coolant system - Central lubrication The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

used sheeter Seewer Rondo Kombi 614, overhauled, Masch.-Nr. 0617 01

Bread Roll Line Combi WP Multimatic MUS Selecta Modular V60 Combi Year of Make: 2016 Condition: repaired, ready for immediate use Operating hours: 12,200 h Dough divider and rounder, type: Multimatic MUS 5-row 3/4/5-row, combined roll line for the production of shaped rolls and long rolls, sliced and uncut Working width: 600 mm Weight range: 35-85 g (piston diameter: 50 mm) Hourly output: 6000 pieces Fermentation time: 12 min Stamp unit for emperors, braids, pressed rolls, etc. Green operation without proofer with direct deduction possible (e.g. for Berliners) Performance

x-travel: 1.000 mm y-travel: 340 mm z-travel: 450 mm table:: 1.300 x 400 mm spindle taper ISO: 40 SK turning speeds: 32 - 1.400 U/min spindle stroke: 80 mm total power requirement: 7,5 kW Features: - Universal console milling machine with HEIDENHAIN digital display - Mechanical tool clamping - Cooling system - Various SK 40 tool holders - Machine documentation in German The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Control: Heidenhain TNC 355 x-travel: 1.000 mm y-travel: 400 mm z-travel: 450 mm surface area: 1.300 x 400 mm feed range: 1 - 6.000 mm/min number of spindle speeds: 60 - 3.600 U/min vertikal number of spindle speeds: 30 - 1.800 U/min horizonta spindle taper: SK50 vertical and horizontal milling possible: Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 720 mm y-travel: 220 mm z-travel: 450 mm table surface area: 1000x310 mm weight of the machine ca.: 1.500 kg dimensions of the machine ca.: 2000x1200x1800 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

General SKU291Y495 MakeSchröder TypeVC 01/106-400 No.11/3686-01-160076 Main Features MaterialStainless steel Motor2.2 KW Surface0.157 m2 Specified Features - Scraped surface heat exchanger Scraped surface heat exchangercheck Number of stages:1 Heating surface0,157 m² Cylinder sizesø 110 x 455 mm Inletø 25 mm Outletø 25 mm Motor2,2 kW (415 V, 940 rpm) Speed138—1085 rpm MaterialStainless steel 1.4571 (316Ti) General Year of construction1998 LocationBarneveld Floorspace0,5 x 1,8 m Total height0,85 m Weight300 kg Extra information Extra SpecificationsPin-RotorCap. 30-100 kg OintmentsStarchGreen FridayCosmeticsFood additivesSugarScraped surface heat exchangersConfectioneryBeveragesBiopharmaceuticalAPIOils & fatSchröderIndustries > Pharmaceutical > OintmentsIndustries > Food & Feed > StarchGreen FridayIndustries > Chemical > CosmeticsIndustries > Food & Feed  ...

General SKU291Y496 MakeSchröder TypeVK 01/60-400-F No.11/3686-01-160044 Year of construction1998 Main Features MaterialStainless steel Motor3 KW Surface0.05 m2 Specified Features - Scraped surface heat exchanger Scraped surface heat exchangercheck Number of stages:1 Heating surface0.05 m² Cylinder sizesø 50 x 300 mm Inlet25 mm Outlet25 mm Motor3 kW (380 V, 940 rpm) With variable speed drivecheck Speed225—1770 rpm MaterialStainless steel 1.4571 (316Ti) General LocationBarneveld Floorspace0,6x1,8 m Total height0,85 m Weight300 kg CEcheck Extra information Extra SpecificationsWiper-bladesOintmentsStarchGreen FridayCosmeticsFood additivesSugarScraped surface heat exchangersConfectioneryBeveragesBiopharmaceuticalAPIOils & fatSchröderIndustries > Pharmaceutical > OintmentsIndustries > Food & Feed > StarchGreen FridayIndustries > Chemical > CosmeticsIndustries ...

A CNC universal bed-type milling machine is offered. Table setup area: approx. 1300mm, operating hours: approx. 100h, spindle hours S1: 54h, program run time: 159h, control: HEIDENHAIN TNC 320, operating voltage: 400V, total rated current: 50A, fuse rating: 63A, spindle speed: 32-1400rpm, control: HEIDENHAIN TNC 320. Equipped with full enclosure, coolant system, work area lighting, chip guard. Weight: approx. 5000kg, overall dimensions X/Y/Z: approx. 3910mm/2700mm/2800mm. Inspection by prior arrangement is possible.

x-travel: 100 mm y-travel: 200 mm z-travel: 450 mm taper ISO: SK 40 turning speeds: 22 - 1400 U/min total power requirement: 7,5 kW weight of the machine ca.: 2,6 t dimensions of the machine ca.: 1,8 x 2 x 1.85 m 3-axis digital readout - Rapid traverse - Documentation The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Vietmac PL-84 Wide Belt Sander/Combi Working width 1100mm Working height 3-160mm Number of generators 1 Agregat combi Grinding unit blowing Main motor with a power of 8.8/11kw Feed speed adjustable by variator

Horizontal and vertical milling machine; including manual vise jaw width 1550 mm; equipped with Heidenhain VRZ 750 electronic X-, Y-, Z-axis readout; central lubrication; including approximately 20 different SK 40 collet holders, of which with various tools including drills / mills; including 2 tool drawer cabinets with 6 and 8 drawers including various contents; Auction-ID: A1-50476-3

Milling machine with - Heidenhain TNC 135 - Rapid traverse - Milling head with hydr. Tool spacing - Coolant system - Central lubrication x-travel 1000 mm y-travel 450 mm z-travel 450 mm Table clamping surface 1370 x 400 mm Number of T-slots 5 pcs.Spindle speeds 32 - 1500 rpm Tool holder SK 50 Total power requirement 7.0 kW Machine weight approx. 3.1 t Dimensions L x W x H 2.1 x 1.7 x 1.9 m Condition: functional Auction-ID: A7-51438-409

. The Kombi version can accommodate 9 people and is therefore ideally suited for shuttle services, taxi companies, group transport, but also for camper conversions or as a spacious family car. The 2.0 TDI diesel engine is the beating heart of these cars and offers an excellent balance between power, traction and fuel consumption. Whether you choose direct use, export abroad or a project such as a motorhome conversion, the T6 Kombi offers endless possibilities. We hereby offer our Volkswagen Transporter T6 Kombi from 2018. This car is perfectly maintained starts and drives excellently and is equipped with the powerful 2.0 TDI diesel engine with 150 hp and manual gearbox. The car meets the Euro 6b emission standard, which means that you can enter most low emission zones in Belgium and Europe without any problems for years to come. The car is registered as a 9 seater but currently there are ...

Fehrenbach Kombi 1.40 m flail mower with grass collection container (Used machine) • Manufacturer: Fehrenbach Maschinenfabrikation GmbH • Type: Estate 1.40 m • Machine type: Flail mower with grass collection container • Working width: 1.40 m • Machine No.: 08-31974-2022 • Weight: 560 kg • Knives: EM51 fine-cut flail knife • Tractor attachment Equipment: • Integrated grass collection container • Fine-cutting flail mower deck • PTO drive • Three-point mount • Hydraulic actuation of the collection tank • Hydraulic cylinder • Hydraulic hoses with plug-in couplings • Large tailgate / emptying flap • Two viewing windows on the collection container • Back-up roller • Protective cover for drive • Stop and adjustment options on the three-point block Condition: • Used but well-maintained condition • Signs of wear and tear due ...