knuth werkzeugmaschinen used for sale

Ref. -No.: 10294 Manufacturer: SCHNEIDER WERKZEUGMASCHINEN Year of construction: 1983 Type of control: CNC Control: Siemens Sinumerik 840 D Storage location: Halberstadt Country of origin: Deutschland Machine-No.: 27.0175 Weight Of The Machine Ca.: 4 t Turret places: 8 Pcs Turning Diameter: 595 mm Turning Length: 3000 mm Bezel diameter (inside): 240 - 490 mm Further information: Tool turret, with 8 holders, with chip conveyor, approx. 300 mm wide, Belt filter system Mayfran, 2 bezels, 1 x for diam. up to 240 mm, 1 x for diam. until about 490 mm

Condition: used, ready for use Year of manufacture: 1998 Control: Siemens 840 C Travel X/Y/Z: 2x600 or 1x1,800 / 425 / 400 mm Main spindle: SK40 / 7,500 rpm / 106 Nm / 14 kW / IKZ Rapid traverse: 40 m/min Tool changer: 36-speed Dimensions W/H/D: 5,100 / 3,000 / 2,900 mm Weight: 9,500 kg

Precision machining center, control Siemens Sinumerik 840 D Solution Line, travels: X-axis 400 mm, Y-axis 500 mm, Z-axis 425 mm, spindle spacing 400 mm, version with 2 independent Z-axes, 5th axis 2-axis direct driven, 2 - work spindles HSK-A63 1-17,500 rpm, drive system torque motor, equipment including: rotary distributor, tension bridge supports, pressure amplifier pneumatic, tool magazine ges. 120 tool positions (2 x 60), pressure changeover hydraulic, clamping hydraulics basic module, high-pressure pump 70 bar, emulsion mist separation system, automatic loading door, air interrogation control, inductive tool breakage control, tool life monitoring, scraper belt conveyor KNOLL 800 K-1/400, cooling lubricant cleaning compact belt filter KNOLL FKA 1200 and much more.

Double-spindle machining centre in 5-axis design Travel x/ y/ z = 600/ 600(975) / 500 mm Number of spindles 2 Spindle spacing 600 mm Rapid traverse 45 m/min Spindle speed up to 17,500 rpm Drive power 38 kW Tool magazine 2 x 72 tool positions Tool holder HSK 63 CNC control Siemens 840D 1 x Tool breakage detection 2 x tension bridge support H75 mm 2 x tension bridges 5th axle Coolant system Knoll, 70 bar 1 x chip conveyor KB1000 1 x Drill Head Indexing 2 x Tool Planing System Control 2 x Upgrade Kit Torsion Compensation A/U Axis

Precision machining center, Siemens Sinumerik 840 D Solution Line control, travels: X-axis 600 mm, Y-axis 630 mm, Z-axis 510 mm, 2 working spines 1-17,500 rpm, torque motor drive system, equipment including: oil distributor for rotary table, pneumatic pressure amplifier, magazine extension 144 tool positions (2 x 72), clamping hydraulics basic module, high-pressure pump 70 bar, emulsion mist separation system, automatic loading door, air query control, inductive tool breakage detection, scraper belt conveyor KNOLL 800 K-1/400, coolant cleaning compact belt filter KNOLL FKA 1200 and much more.

Offered is a rapid radial/column drilling machine. Drilling capacity: up to approx. Ø50mm. Speed range: 58-1275rpm. Thread cutting device: available, outreach: 920mm, machine lamp: available, baseplate/table size X/Y: approx. 1100mm/400mm, T-slots: 2 at the rear left, motor power: approx. 1.5kW without coolant system, machine weight: approx. 1200kg. Inspection under power by arrangement possible.

grinding diameter: ca. 250 mm grinding length: 200 mm centre height: 85 mm total power requirement: kW weight of the machine ca.: 2,5 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel:700 mm y-travel:450 mm z-travel:500 mm total power requirement:23,4 kW weight of the machine ca.:3100 kg dimensions of the machine ca.:3200 x 4000 x 2500 mm tool taper:ISO 40 feeds:0,2 - 0,6 - 0,12 mm/U spindle speeds::20 - 3150 , direkt programmierbar /min feed range:1 - 3000, in B=0,01 - 3 U/min rapid traverse in x-y-z axis:6m/ min, B = 7,6 U/min work table::NC Rundtisch(B-Achse) D=630 mm, 9T-nuten control:CNC432

Table size: 550 x 950 mm traverse path x/y/z: 850/550/550 mm spindle retainer: BT 40 ISA kl. / gr. Table/spindle distance: 100/650 mm spindle speed: 8000 rpm number of tool stations: 24 pièces feeds: x/y 5-10000 / z 5-12000 mm / min rapid traverse: x/y 24 / z 20 m / min spindle drive: 11/15 kW Electr. Supply: 400 V, approx. 20 kVA kW space requirement: 2600 x 2220 x 2700 mm weight: 5200 kg

KNUTH PICO TURN CNC lathe built in 2015 in Germany is the ideal choice for small-scale industries focused on unit and small batch production. Due to its extensive machining capabilities, sturdy design and high productivity, this compact size machine performs excellently in, among others, precision arc turning, threading and longitudinal and transverse workpiece turning. All operations are performed by a powerful spindle with variable speed adjustment between 150 and 1750 rpm. The KNUTH PICO TURN CNC lathe is additionally equipped with, among others, an automatic 4-position tool changer, an intuitive SIEMENS SINUMERIK 808D CNC controller and a 3-jaw chuck with a diameter of 125 mm. The total weight of the machine is 400 kg. Technical specifications of the KNUTH PICO TURN mini metal lathe machine - feed rates in the X/Z axis: 500/250 mm - rapid traverse in the X/Z axis: 2000/1000 mm/m ...

Control Siemens 828 D Travel X/Y/Z 850/550/550 mm Speed 8000 rpm Tool magazine for 24 tools BT40 Table size 950x550 mm

Perfect, used short time. Lead Screw and Feed Shaft Lathe 3-axis position indicator Workpiece length (max.) 1.928 mm Turning diameter over bed 560 mm Turning-Ø over support 355 mm Turning diameter over gap bridge 785 mm Gap bridge length 170 mm Bed width 350 mm Travel X-axis 316 mm Travel Z1-axis 130 mm Swing range of top slide ± 52° Spindle speeds L 25-200 / H 200-1600 1/min Spindle bore 80 mm Spindle mount Camlock D1-8 Spindle taper MT 7 Feed X-axis 0,02 - 0,573 mm/R Feed Z-axis 0,059 - 1,646 mm/R Tapping, metric (47) 0,2 - 14 mm Tapping, diametric (50) 4-112 DP Tapping, module (39) 0,1 - 7 mm Tapping, whithworth (60) 2-112 TPI Tailstock quill diameter 75 mm Tailstock taper MT 5 Tailstock quill stroke 180 mm Tailstock traverse adjustment ± 12 mm Motor rating main drive 7,5 kW Overall dimensions 3,34x1,15x1,46 m Weight 2.720 kg 3-jaw chuck Ø 315 mm 4- ...

We sell on behalf a pipe and profile bending machine of the company Knuth (type KPB 50 ). The condition is AS NEW and has a lot of accessories. Pictures to follow

Knuth UFM 2 Universal Milling Machine Specifications X-axis travel (manual) 800 mm X-axis travel 750 mm travel Y-axis 300 mm travel Z-axis 400 mm Table size 1320x320 mm T-slots 5x14x63 mm Feeds Y-axis travel (8) 20 - 360 mm/min Z-axis travel 600 mm/min Spindle speed (12) 58 - 1800 min-1 Vertical spindle taper SK 40 Distance between spindle tip and table 0 - 400 mm Head rotation 45° Cone of the SK 50 horizontal spindle Drive Main engine power 4 kW Motor power in the Z-axis 0.75 kW Feed motor power 0.55 kW Cooling pump motor 0.09 kW Coolant pump capacity 25 l/min Dimensions and weight Dimensions: 1900x1720x1750 mm Weight 2100 kg More items - new and used - can be found in our shop! International shipping costs on request!

Dear Ladies and Gentlemen, the machine has not run much, it has been treated with care and is fully functional.

Cylindrincal grinding machine, KNUTH RSM 750, interna/external, DRO, This machine can be inspected under power in our warehouse., Mimu Machine Tools, Gussago BS Italy

Key data: 660 mm, 3000 mm, 440 mm

Sine 330/3000 D Well-maintained conventional lathe without mounted lathe chuck but with standard accessories The construction follows the classic design however, is based on a heavy, one-piece cast machine bed. How in the case of heavy lathes here, too, the adhesion between the engine and spindle via a manual Multi-plate clutch. With integrated Features such as the removable bed bridge, rapid traverse and a Taper turning device. WORKSPACE Workpiece length 3000 mm Turning diameter over bed 660 mm Circumferential Ø over support 440 mm Turning diameter without bridge 900 mm Bridge length 320 mm Bed width 400 mm TRAVELS X-axis travel 368 mm Travel Z1 axis 230 mm Swivel range upper slide 45° MAIN SPINDLE Spindle speed 25 1/min - 1600 1/min Spindle bore 105 mm Spindle holder D1-8 RUSH COURSE Rapid traverse X-axis 2000 mm/min Rapid traverse Z-axis 4000 mm/min ...

Offer 25078 Specifications: - Cutting range at 90° around 550 mm - flat 570 x 550 mm - Cutting speed infinitely variable 20 to 100 m/min - Hydr. Raising + lowering the saw frame - Cutting pressure infinitely adjustable 0 to 10 m/min - Material replenishment machine - Stop length 500 mm - Total drive power approx. 400 V / 5.7 kW -Attack - 2 x roller conveyor 1000 + 3000 mm - Space requirement approx. W 3400 x H 2100 x D 1300 mm - Weight approx. 2100 kg

Turning diameter over bed/cross slide: 530mm/280mm, center height: 264mm, center width: 2000mm, bed width: 370mm, speed: 2000rpm, spindle bore: 80mm, tool shank dimensions X/Y: 25mm/25mm, cross slide travel: 300mm, quill diameter: 65mm, quill stroke: 180mm, repeat accuracy: +/-0.008mm. The machine has an electrical problem on the tool head. Documentation available. On-site inspection is possible.

sheet width: 1350 mm plate thickness: 3 mm cutting angle: 1° 30 no. of strokes: 35 Hub/min table height: 850 mm rear stop: 450 weight of the machine ca.: 1200 kg dimensions: ca. 1700 x 1650 x 2000 mm manually operated back gauge 450 mm working lifght included safety gate included The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Offer 24190 Specifications: - Drilling capacity 25 mm - Drilling spindle holder MK 3 - Drilling spindle stroke 140 mm - 8 drilling spindle speeds 100 - 2900 rpm - Min. / max. distance drilling spindle / table 110 / 405 mm -Lighting - Keyless chuck - Coolant device - Machine vise - Machine base - Drive 400 V / 0.75 kW - Space required: W 400 x H 1250 x D 600 mm - Weight approx. 200 kg

x-travel: 400 mm y-travel: 320 mm z-travel: 440 mm table-size: 80 x 325 mm spindle taper ISO: Sk 40 spindle turning speed range: 63 - 3150 U/min quill stroke: 60 mm total power requirement: kW weight of the machine ca.: 1,5 t dimensions: 1,8 x 1,8 x 1,9 m Universal Milling Machine - Digital Display - Hydraulic Tool Clamp - Central Lubrication - Coolant System - Machine Light - Machine Feet - Counter Bearing - Chip Tray The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 400 mm y-travel: 300 mm z-travel: 400 mm spindle taper ISO: 40 spindle turning speed range: 40 - 2.000 U/min table-size: 750 x 320 mm feeds -stepless-: 10 - 380 mm/min rapid traverse: 1.200 mm/min power capacity: 2,2 kW quill stroke: 80 mm coolant: voltage: 400 V total power requirement: 4,7 kW weight of the machine ca.: 1,1 t dimensions of the machine ca.: 1,15 x 1,40 x 1,85 m - Serial-No.: 148373 - 3-axis digital display - Horizontal milling device - Milling head swivels ±45° - Coolant device The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Offer 25328 Specifications: - Max. cutting width 3200 mm - Max. cutting capacity at 45 Kp/mm² 12 mm - Stand projection 175 mm - Cutting angle 1.48 ° -one. Cutting gap adjustment - Number of hold-downs 13 pcs - Stroke rate up to 10 1/min - Front angle stop approx. 1100 mm - 2 pcs. front support arms approx. 1100 mm -Mot. Back gauge with positioning control up to 1000 mm - Rear space protection with light barrier - Cut line illumination - Working height 860 mm - E - Footswitch - Drive 400 V / 19.5 kW - Space requirement approx. W 4150 x H 2150 x D 2300 mm - Weight approx. 8.5 t

A Durmazlar press brake distributed by Knuth is available. Pressing force: 35t, bending length: 1350mm, motor power: 5.5kW, stroke: 100mm, stroke rate: 17/min, max. operating pressure: 240bar, oil capacity: 150l. Machine dimensions X/Y/Z: approx. 1400mm/1400mm/2100mm, weight: approx. 1750kg, operating hours: 1258h. An on-site inspection is possible.

grinding length: 1000 mm centre height: 180 mm length: 3600 mm width: 1650 mm height: 1800 mm weight of the machine ca.: 3,7 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Stroke: 135mm, max. sheet thickness: 20mm, max. bending length: 3050mm, pressing force: 80t, max. operating pressure: 2975psi, max. die opening: 250mm, bending angle range: 1°-42°, oil capacity: 150L, max. tool weight upper/lower: 40kg/115kg. Machine dimensions X/Y/Z: approx. 4000mm/2050mm/2450mm, weight: approx. 6000kg. Documentation available. An on-site inspection is possible.

grinding length: 1500 mm centre height: 180 mm weight of the machine ca.: 3,9 t dimensions of the machine ca.: L: 4900 x 1650x 1800 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel (diameter): 32 mm throat: 280 mm bore stroke: 110 mm spindle taper MT: 3 table-size: 340 x 400 mm turning speeds: 210- 2600 U/min total power requirement: 1,8 kW weight of the machine ca.: 325 kg dimensions of the machine ca.: 950 x 450 x 1750 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

HBM type Knuth BO110,Table size: 1100 mm x 960 mm with tail stock and face chuck

x-travel: 350 mm y-travel: 210 mm z-travel: . mm digital readout: ja table surface area: 800x 240 mm turning speeds: 115-1750 U/min feed: . m/min throat: . mm spindle stroke: . mm The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

This 3-axis KNUTH XMill 1000 TB was manufactured in 2011. It features a total power of 23.8 kW and operates on 400 volts with a frequency of 50Hz/3. Ideal for detailed vertical machining tasks. Contact us for more information.

bore capacity in steel (diameter): 62 mm arm length: 350-1600 mm workpiece height max.: 1250 mm distance spindle nose and table: 350-1250 mm Boring depth max.: 315 mm machine table: 2400 x 1000 x 200 mm Turning speeds of the bor. spindle: 38 - 2000 U / min spindle taper: MT5 feed: 0,06 - 1,00 mm/U engine output: 4 kW stroke drive: 1,5 kW oil pump: 0,75 kW total power requirement: 6 kW weight of the machine ca.: 3,8 t dimensions of the machine ca.: 2490 x 1050 x 2780 mm Steps of spindle speed: step-less Steps of spindle feed: 8 Speed of the arm up and down: 1.2 m/min Arm moving angle: ±180 degree Spindle moving distance of each dial revolution: 122 mm Max. spindle torque: 400 Nm Max. spindle feed resistance: 16000 N The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

serial number: 108392 Electric capacity: 7,7 Watt working width: 2050 mm : 4 mm weight of the machine ca.: 4 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

This KNUTH KHT 4113 was manufactured in 2008. A robust hydraulic shearing machine, it features a cutting length of 4100 mm and thickness capacity of 13 mm. Equipped with a 30 kW motor and a substantial clamp force of 62 tons, it ensures precise and efficient operations. Machine weight is 16,300 kg. CE Certified by TÜV Rheinland. If you are looking to get high quality shearing capabilities consider the KNUTH KHT 4113 machine we have for sale. Contact us for more information.

This KNUTH BO 110 was manufactured in 2013. A robust boring machine, it features a maximum workpiece diameter of 250 mm and a grinding length of up to 500 mm. The grinding wheel operates at 1670 RPM, with a headstock speed variable from 50 to 500 RPM. It supports a table swivel range of ±9° and a table speed up to 4 m/min. Ideal for precision boring, the KNUTH BO 110 machine we have for sale. Contact us for further details.

Technical data: - Max. cutting width 2080 mm - Max. cutting capacity at 45 Kp/mm² 6 mm - Column projection 150 mm - Automatic cutting angle adjustment 0.3 - 2 ° - automatic. Cutting gap adjustment - Number of hold-downs 10 pcs - Stroke rate up to 22 1/min - Front angle stop approx. - 2 pcs. front support arms approx. - mot. Back gauge with positioning control up to 1000 mm - Rear space protection with light barrier - Cut line illumination - Working height 860 mm - E - Footswitch - Drive 400 V / 11 kW - Space requirement approx. W 3150 x H 2150 x D 2300 mm - Weight approx. 4.8 t

This 2-Axis lathe was manufactured in 2015. Featuring a Fanuc 0i-Mate TD control, it offers a speed range of 50-6000 min-1 and rapid traverse speeds up to 30000 mm/min. Equipped with a hydraulic 3-B chuck and hydraulic tailstock MK5, it ensures efficient operations. Weighing 5000 kg and with dimensions of 3300 x 1700 x 1700 mm, it’s robust yet space-efficient. Consider the Knuth Starship 400 for precise turning operations. Contact us for further information.

This 3-axis KNUTH XMILL 640 was manufactured in 2015. It features a Siemens 828 control, a spindle speed of 8,000 rpm, and a BT40 spindle taper. The table size is 750 × 360 mm, and it includes an 18-tool changer. If you are looking to get high-quality milling capabilities, consider the KNUTH XMILL 640 machine we have for sale. Contact us for more information.

Universal machining center, CNC tool milling machine, milling machine, universal milling machine, tool milling machine, drilling and milling machine -Manufacturer: Knuth, CNC tool milling machine type WF 5 NC -Clamping table: 800 x 330 mm -Travel: X/Y/Z 400/330/440 mm -Spindle holder: SK40 -Quill stroke: 60 mm -Speeds from: 63 to 3150 rpm -Coolant system -Accessories: including extensive accessories see photos -Dimensions: Machine: 1500/1345/H1900 mm / Control cabinet 750/450/H1730 mm -Total weight: 1960 kg

A Knuth CNC vertical milling machine is available. Travel X/Y/Z: 385mm/230mm/385mm, table dimensions X/Y: 800mm/240mm, max. table load: 100kg, reach: 300mm, speed: 3000rpm, rapid traverse: 6m/min, feed rate: 2m/min. Machine dimensions X/Y/Z: approx. 1850mm/1650mm/2000mm, weight: approx. 1500kg, control: Knuth GPlus 450. Documentation available. An on-site inspection is possible.

grinding length: 600 mm grinding width: 300 mm workpiece height: - mm total power requirement: 7 kW weight of the machine ca.: 2,7 t dimensions of the machine ca.: 2800x2200x1890 mm Horizontal surface grinder in excellent condition The machine has been in operation for only a few hours. Work area • Travelling distance X-axis: 765 mm • Travelling distance Y-axis: 340 mm • Table dimensions: 300 x 630 mm • Scale ring division Y-axis: 0.02 mm • Scale ring division Z-axis: 0.005 mm • Autom. transverse infeed: 0.1-8 mm • Autom. vertical infeed: 0.005-0.05 mm Drive unit ratings • Motor rating main drive: 5.5 kW • Motor rating servo-drive: 0.5 kW Dimensions and weights • Total weight: 2,700 kg • Dimensions: 800 x 2200 x 1890 mm • Grinding wheel dimensions: 350 x 40 x 127 mm Accessories: 2-axis position display Knuth Xpos 3.1 Grinding wheel, Grinding wheel flange, Balanci ...

A CNC water cutting system Knuth is available. Cutting dimensions X/Y: 6000mm/2000mm, travel path Z: 250mm, max table load: 600kg/m², max feed rate: 16m/min, positioning accuracy at 500mm: +/-0.05mm, repeatability at 500mm: +/-0.05mm, max operating pressure: 4000bar, total power requirement: 40kW. Machine dimensions X/Y/Z: approx. 6350mm/3250mm/4000mm, weight: approx. 4000kg. Documentation available. An on site inspection is possible.

A Durmazlar guillotine shear distributed through Knuth is available. Working width: 3020mm, max. sheet thickness: 8mm, motor power: 18.5kW, stroke: 140mm, stroke rate: 14/min, max. pressure capacity: 210bar, oil tank capacity: 250l. Machine dimensions X/Y/Z: approx. 2650mm/3400mm/2300mm, weight: approx. 7500kg. Documentation available. An on-site inspection is possible.

KNUTH VB 510 Metal Band Saw, BJ 2018 Operating voltage:400 V Frequency: 50 Hz Connection: 1.5 kW Table dimensions:600x500 mm Incl. whetstone and sanding belt device Dimensions set-up:1150x700x2000 mm Weight:approx. 400 KG

Press brake manufactured in 2021. This KNUTH AHK H 30270 features a pressing force of 270 t and a bending length of 3,100 mm. It includes a Cyberlec Touch 8 Controller and a motorized CNC anti-winding system for enhanced precision. The machine is equipped with front support arms sliding on linear guides and a pedal drive for ease of operation. If you are looking to get high-quality bending capabilities, consider the KNUTH AHK H 30270 press brake we have for sale. Contact us for further details.

This 3-axis KNUTH Turnado 280/1500 was manufactured in 2018. It features a distance between centers of 1,420 mm and a swing over bed of 560 mm. The machine is equipped with a spindle speed range of 25 – 1,600 rpm and includes a 3-axis Digital Readout (DRO) and a quick change tool post. If you are looking to get high-quality turning capabilities, consider the KNUTH Turnado 280/1500 horizontal turning machine we have for sale. Contact us for further details.

This 3-axis KNUTH KB 1400 was manufactured in 2018. It features a travel of 950 mm on the X-axis, 400 mm on the Y-axis, and 500 mm on the Z-axis. The machine is equipped with a spindle speed range of 30 to 1800 rpm and a table setup area of 1400 mm x 400 mm. If you are looking to get high-quality milling capabilities, consider the KNUTH KB 1400 vertical machining centre we have for sale. Contact us for further details.

Hydraulic shearing machine manufactured in 2021. This KNUTH KHT H 3010 NC features a working length of 3080 mm and a throat depth of 150 mm. It includes a Cybelec Touch 8 control for optimal positioning of cutting gap, angle, and length. The robust backgauge and standard blades are suitable for stainless steel. If you are looking to get high-quality shearing capabilities, consider the KNUTH KHT H 3010 NC machine we have for sale. Contact us for further details.