We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
121,919 used machines on RESALE, but how to find them? Machine Search
used
Roast knuckle or chicken grill BEEREX Type: HD 5 Power: 9 kW Power supply: 400 V / 50 Hz Request a quote iNTER-WiBA Sp.J. ul. Krakowska 263 PL 43-305 Bielsko-Biala USt-IdNr.: PL547-17-47-669 tel. 0048/33 812 58 60 fax. 0048/33 812 58 36
used
Knuckle Joint Press COLOMBO AGOSTINO 1000 ton dimension table 1000 x 650 mm dimension slide 1000 x 600 mm Year 1991 In excellent working condition
used
Capacity: 2500 ton Slider stroke: 190 mm Size of a working course of slider before its extreme bottom position corresponding nominal capacity: 4.5 mm Number of slider courses per minute: 20 Maximum distance between table and slider (in lower position of slider): 800 mm Distance adjustment between table and slider: 20 mm Table overall dimensions: - from front to rear: 1400 mm - from left to right: 1250 mm Thickness of a under-forginig plate: 230 mm Hole diameter in a table: 125 mm The size of a slider in front - back: 900 mm Lower eliminator stroke length: 190 mm force of the bottom pusher: 75 ton Distance between railings: 950 mm Course of a pusher in a slider: 15 mm Capacity of a pusher in a slider: 25 ton Admissible number of starts per minute: 10 Machine overall dimensions - length: 3910 mm - width: 3920 mm - height: 6220 mm Press weight: 97715 kg
used
(analogue of KB8344) Specification: Nominal force: 2500 ton Ram stroke: 190 mm Number of strokes in 1 minute: 20 Shut height: 800 mm Bolster plate-to-ram adjustable stroke: 15 Table size: 1250x1400 mm Weight 124.230T
used
Specification: Nominal force: 2500 ton Ram stroke: 190 mm Number of strokes in 1 minute: 20 Shut height: 800 mm Bolster plate-to-ram adjustable stroke: 15 Table size: 1250x1400 mm Weight 124.230T
used
Press force at the end of stroke: 2000 t Slide stroke: 200 mm Number of slide strokes per minute: 17 Adjustment of interstamping space: 15 mm Max. distance between table and slide in its lower position: 830 mm Distance between guides in daylight: 1040 mm Bolster plate dimensions: -From front - to back: 1300 mm -From right - to left: 1270 mm Size of the opening in the table - diameter: 130 mm Slide dimensions: -From front - to back: 800 mm -From right - to left: 1250 mm Main electric motor: -Type: АС 82-4 -Power: 55 kW -RPM: 1380 Electric motor of adjustment: -Type: АО 52-6 -Power: 4,5 kW -RPM: 950 Press weight: 75107 kg
used
Nominal force: 2500 ton Ram stroke: 190 mm Number of strokes in 1 minute: 20 Shut height: 800 mm Bolster plate-to-ram adjustable stroke: 15 Table size: 1250x1400 mm Weight 124.230T
used
pressure:30 t throat:110 mm stroke:50 mm no. of strokes:35 - 80 /min distance table/ram, max. stroke up, adjustment up:230 mm table surface area:410 x 260 mm table height over floor:790 mm passage to the back:170 mm ram surface:190 mm ram adjustment:35 mm weight:1,3 t dimensions (WxDxH):1,0 x 1,1 x 1,8 m German Safety: moving screen:UVV 11.062 - VBG 7n5.1 § 6
used
Handle hole punch (bags) -Knuckle punch with punch and die for 20 x 90 mm handle hole -Suitable for bags or paper bags
used
Hole punch (punch) Northern precision punching NPR-55 Hole punch (knuckle punch) -Punching of sheet metal and plastics. -Aluminium, bronze, copper, 2 mm steel sheets -Simple solution of punching - punching with punch and die stamp round D = 10 mm can be replaced individually on request
used
Tape De-Schwarter / Band- Abschwartmaschine Manufacturer: MAJA Type: SKINNY II Description: Belt operation for automatic de-skinning of all flat sections Manual de-skinning of round cuts - such as shoulder, ham and pork knuckle Belt width 380 mm Cutting width: 434 mm 4 new spare blades included Cutting thickness infinitely adjustable Machine can be operated with conveyor belt or manually mobile on 2 pulleys (with brake) & 2 fixed castors Stock machine, immediately available! Specifications: 400V / 50 Hz / 0.55 kW / 1.8 A / 16A CEE plug Total dimensions: H120 x W85 D140 cm Year of construction: 2019 Weight: approx. 190 kg Function tested / Machine ready for immediate use! Condition and accessories see original pictures!
used
Meva Alustar The lightweight AluStar universal formwork for the wall. Top wall formwork in terms of weight and performance perfect as a supplement to large-area formwork where no crane can reach. Best results in residential and commercial construction thanks to the Alkus all-plastic sheet. • Handle profile on all elements • Snap edge on the large elements • Element widths up to 90 cm Meva Alustar The lightweight AluStar universal formwork for the wall. Top wall formwork in terms of weight and performance, perfect as additional large-area formwork where no crane can reach. Best results in residential and commercial construction thanks to the Alkus solid plastic panel. • Handle profile on all elements • Knuckle edge on the large elements • Element widths up to 90 cm
used
Working height 11 m, working range 6.8 m, load capacity 230 kg, 350° swivel radius, with additional knuckle boom on the work basket 180°, jib vertical working range 144°, total width 122 cm, transport height 201 cm, transport length 574 cm, machine weight 7100 kg
new
: 15000 kg length: 10000 mm width: 2450 mm height: 625 mm : lenkbar : lenkbar size of tyres: 425 x 260 mm weight of the machine ca.: 2,9 t dimensions of the machine ca.: ca. 11,7 x 2,5 x 0,625 mm Heavy duty trailer with - Double steering knuckle steering - small turning circle - Tilt-proof because the steering angle is limited - robust, low maintenance - reversible drawbar, length 1320mm - impregnated wooden support. - Standard paintwork changes. On request in your Ral color. Would you like other load capacities and dimensions? Please contact us. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Belt Descaler / Belt Peeling Machine Manufacturer: MAJA Type: VARIO Description: Belt operation for automatic derinding of all flat sections Manual derinding of round cuts - such as shoulder, ham and knuckle of pork Belt width 380 mm Cutting width: 434 mm 4 new replacement blades included Cutting thickness infinitely adjustable with compressed air connection for clean work Machine can be operated by conveyor belt or manually mobile on 2 pulleys (with brake) & 2 fixed castors Stock machine, immediately available! Specifications: 400V / 50 Hz / 0.88 kW / 2 A / 16A CEE plug Total dimensions: H120 x W85 D140 cm Year of construction: 1998 Weight: approx. 190 kg Function checked / machine ready for immediate use! Condition and accessories see original pictures! If you have any questions, email or call.
used
MEMBRANE SKINNER, MAJA, TYPE: EVM 3006 Technical description: Serial number: 42728 Power: 0,75 Kw, 380 V, 50 Hz Working widht: 545 mm Dimensions: 1000 x 600 x 1050 mm This machine has only been designed for use in the meat processing industry. The EVM 3006 type is a membrane skinning machine used to open and manually remove the membrane and skin from pieces of fish, pork, beef, poultry, veal, game and horse. Only round and flat products may be processed on open membrane skinning machines (e.g. knuckle joints or thighs)
used
Description: Heavy duty trailer with - Double knuckle steering - small turning circle - Tilt-proof because the steering angle is limited - robust, low maintenance - reversible drawbar, length 1200mm - impregnated wooden pad. Load capacity 15000 kg Length 6000mm Width 2450mm Height 625mm Rear axle: steerable Front axle: steerable Tire dimensions 425 x 260 mm Machine weight approx. ,6 t Space requirement approx. 7.2 x 2.5 x 0.625 mm Approx. Onsite Dimension. (l x w x h): 7,200 x 2,450 x 700 mm, weight approx.: 1,860 kg
used
pressure:100 t distance between columns:1180 mm stroke:1 - 120 mm no. of strokes:90 /min distance table/ram, stroke up:470 mm table surface area:1100 x 700 mm table height over floor:800 mm side window:400 mm ram surface:740 x 350 mm ram adjustment:100 mm power requirement:37,0 kW weight:11,0 t dimensions (WxDxH):2,3 x 2,0 x 3,5 m knuckle-joint press:hydraulisch angetrieben T-slots in table and ram acc. to specification:auf Anfrage foundation pit:nicht erforderlich
used
CONTROLS PLC BECKHOFF PRESS DESIGN drive system: knuckle-joint feedstock transport direction: left to right SLIDE total force (nominal): 250 to stroke: 67 mm stroke rate (max.): 80 /min COUNTER RAM nominal force: 125 to V-RING nominal force: 125 to TOOL DIMENSIONS lower table (left-right): 560 mm lower table (front-back): 600 mm upper table (left-right): 560 mm upper table (front-back): 560 mm STRIP-FEEDER feeder type: roll feeder DIMENSIONS / WEIGHTS total weight approx.: 14000 kg ATTACHMENTS -FINEBLANKING PRESS- decoiler: optional waste cutter: yes + Control system completely renewed in 2015
used
CONTROLS PC controller BECKHOFF PRESS DESIGN drive system: knuckle-joint SLIDE total force (nominal): 250 to stroke: 61 mm stroke rate (max.): 60 /min COUNTER RAM nominal force: 75 to stroke: 15 mm V-RING nominal force: 75 to stroke: 13 mm TOOL DIMENSIONS lower table (left-right): 540 mm lower table (front-back): 540 mm upper table (left-right): 540 mm upper table (front-back): 540 mm shut height max.: 320 mm ram adjustment: 145 mm distance between columns (H-frame): 560 mm passline opening (free passage in side columns): 270 mm STRIP-FEEDER feeder type: roll feeder sheet width max.: 250 mm sheet thickness max.: 10 mm feeding step max.: 9 ...
used
PRESS DESIGN drive system: knuckle-joint feedstock transport direction: right to left SLIDE total force (nominal): 80 to stroke: 50 mm stroke rate (max.): 70 /min COUNTER RAM nominal force: 22 to V-RING nominal force: 25 to TOOL DIMENSIONS lower table (left-right): 430 mm lower table (front-back): 490 mm upper table (left-right): 420 mm upper table (front-back): 420 mm shut height max.: 230 mm ram adjustment: 80 mm distance between columns (H-frame): 450 mm passline opening (free passage in side columns): 200 mm OVERALL SPECIFICATIONS (COIL LINES) sheet width max.: 180 mm sheet thickness max.: 5 mm STRIP-FEEDER feeder type: roll feeder sheet width max.: 180 mm &n ...
used
CONTROLS PLC PNEUTRONIC PRESS DESIGN drive system: knuckle-joint frame design: H-frame, monoblock feedstock transport direction: left to right SLIDE total force (nominal): 250 to stroke: 61 mm stroke rate (max.): 60 /min COUNTER RAM nominal force: 75 to stroke: 13 mm V-RING nominal force: 75 to stroke: 15 mm TOOL DIMENSIONS lower table (left-right): 540 mm lower table (front-back): 540 mm upper table (left-right): 540 mm upper table (front-back): 540 mm shut height max.: 320 mm ram adjustment: 145 mm STRIP-FEEDER feeder type: roll feeder pilot release system: yes ELECTRICAL SPECIFICATIONS mains voltage: 400 V mains frequency: 50 Hz DIMEN ...
used
CONTROLS PLC OMRON PRESS DESIGN drive system: knuckle-joint frame design: H-frame, monoblock feedstock transport direction: left to right SLIDE total force (nominal): 160 to stroke: 60 mm stroke rate (max.): 72 /min COUNTER RAM nominal force: 40 to stroke: 14 mm V-RING nominal force: 50 to stroke: 13 mm TOOL DIMENSIONS shut height max.: 277 mm ram adjustment: 80 mm STRIP-FEEDER feeder type: roll feeder sheet width max.: 210 mm sheet thickness max.: 6 mm nominal force: 6 kN measuring wheel: no band lubrication system: optional band support rolls: yes DIMENSIONS / WEIGHTS space requirements -left/right-: 1940 mm space requireme ...
used
CONTROLS PLC SIEMENS S5 SLIDE total force (nominal): 160 to stroke: 60 mm COUNTER RAM nominal force: 80 to V-RING nominal force: 80 to TOOL DIMENSIONS lower table (left-right): 560 mm lower table (front-back): 600 mm upper table (left-right): 560 mm upper table (front-back): 600 mm shut height max.: 335 mm ram adjustment: 125 mm distance between columns (H-frame): 630 mm passline opening (free passage in side columns): 270 mm CROP SHEAR cutting force: 150 kN DIMENSIONS / WEIGHTS total weight approx.: 11000 kg ATTACHMENTS -FINEBLANKING PRESS- autom. tool clamping device: yes decoiler: optional waste cutter: yes slug separator: optional very well maintained machi ...
used
platform lenght: 4500 mm platform width: 1500 mm weight max. in kg: geschätzt, ca.10 t length in width: ca. 1750 mm length in total: ca. 5200 mm height: ca. 600 mm weight of the machine ca.: 1,3 t All-wheel drive steering knuckles steered on both sides, twin tires 8 foldable stanchions/4 per side Total length with drawbar suspension 5200 mm Unfortunately there is no nameplate The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Used 5900 Litre / 1300 Gallon (Gross), Vertical Stainless Steel 316 Storage Tank With Flat Sloping Base Manufacturer: No Nameplate Details Connections TOP 1 x 390x350 Top Access Hatch 2 x 1½” Lap Flange Inlets 1 x 3” Lap Flange Inlet SIDE 1 x 2” Lap Flange on 90° elbow, Overflow 2 x Mowberry style level pads 2 x 1” Socket 1 x 4” Lap Flange 1 x 4” Lap Flange, Mild steel ring 1 x Open tube entering tank with external socket 1 x 3” Pad 1 x 1½” Socket 1 x 1” tube with welded valve half flange BASE 1 x 2½” Slipper Fitting tube, with welded ball Valve & welded 90° elbow Tank is supported on a Flat Sloping base (base is Not Knuckled)
used
Used 20000 Litre / 4400 Gallon Stainless Steel 316 Insulated Mixing Tank / Vessel - Stock Ref: CB6333 Manufacturer: KELLS STAINLESS LTD Model: Storage Capacity: 20,000Litres Date: 01-98 Material: S/S316 Serial:1198-2 Connections TOP 1 x Shrouded Anti-vac 1 x Shrouded Pressure Relief 2 x 3” ISS male with Spray-ball Lance SIDE 1 x Oval Manway 510x410 with Sample point 1 x Keofit sample tap 1 x APV Side entry mixer. Pad Mounted BASE 1 x 4” ISS male with Butterly valve, Inlet / Outlet Mixer Detail: Manufacturer: APV Model: 1V RPM: 260 Motor: Brooke Hanson 2.2kW / 1415rpm Tank is fully Insulated, approx. 80mm with Cladding. Top: S/S knuckled cone Shell: Plastic coated Profile cladding Base: Plastic coated flat sheet cladding Tank is supported on 4-off 8” S/S tube Legs.
used
Used 120500 Litre / 26512 Gallon Vertical Stainless Steel Insulated Storage Tank / Vessel Manufacturer: APV BURNETT & ROLFE BR REF No. 85039 / 1 Connections TOP 1 x 12” Flange top centre Inlet 1 x 3” Flange SIDE 1 x 6” Flange Inlet 1 x 4” Flange Inlet 2 x 3” Flange Inlet 1 x Oval Manway 510x410mm 1 x E& H Level Socket 1 x 6” Flange Outlet Tank is Insulate 50mm, complete with plastic coated riveted sheet cladding. Tank has a flat / knuckled base (Slope / fall if any TBC)
used
Used 20000 Litre / 4400 Gallon Stainless Steel 316 Insulated Mixing Tank / Vessel - Stock Ref: CB6334 Manufacturer: KELLS STAINLESS LTD Model: Storage Capacity: 20,000Litres Date: 01-98 Material: S/S316 Serial:1198-1 Connections TOP 1 x Shrouded Anti-vac 1 x Shrouded Pressure Relief 2 x 3” ISS male with Spray-ball Lance SIDE 1 x Oval Manway 510x410 with Sample point 1 x Keofit sample tap 1 x APV Side entry mixer. Pad Mounted BASE 1 x 4” ISS male with Butterly valve, Inlet / Outlet Mixer Detail: Manufacturer: APV Model: 1V RPM: 260 Motor: Brooke Hanson 2.2kW / 1415rpm Tank is fully Insulated, approx. 80mm with Cladding. Top: S/S knuckled cone Shell: Plastic coated Profile cladding Base: Plastic coated flat sheet cladding Tank is supported on 4-off 8” S/S tube Legs.
used
Used 5900 Litre / 1300 Gallon (Gross), Vertical Stainless Steel 316 Storage Tank With Flat Sloping Base Manufacturer: No Nameplate Details Connections TOP 1 x 390x350 Top Access Hatch 2 x 1½” Lap Flange Inlets 1 x 3” Lap Flange Inlet SIDE 1 x 2” Lap Flange on 90° elbow, Overflow 2 x Mowberry style level pads 2 x 1” Socket 1 x 4” Lap Flange 1 x 4” Lap Flange, Mild steel ring 1 x Open tube entering tank with external socket 1 x 3” Pad 1 x 1½” Socket 1 x 1” tube with welded valve half flange BASE 1 x 2½” Slipper Fitting tube, with welded ball Valve & welded 90° elbow Tank is supported on a Flat Sloping base (base is Not Knuckled)