45 offers

Category: 106: presses
New in: used
Price: request quote
Location: Land-by BY 22400 Brest, Brest
Seller: Kipling Holding

Nominal effort 1600 ton Slide stroke 180 mm Number of strokes per minute 25 Single stroke per minute 16 Shut height 510 mm Bolster plate-to-ram adjustable stroke 16 Table size 1000?1000 mm Slide dimensions 860?900 mm Bolster plate thickness 160 mm Lower knockout Stroke 110 mm Force 500 kN Upper knockout Stroke 16 mm Force 160 kN Main motor 60 kW Overall dimensions 3480x2600x4110 mm Weight 45 ton

Category: 106: presses
New in: used
Price: request quote
Location: Land-de Germany, 72501 Gammertingen
Seller: Pressen HAAS GmbH

Pressure total: 700 ton Ram stroke: 100 mm Shut height (stroke down, adjustment up): 430 mm Table surface area : 550 x 500 mm Ram surface area: 550 x 530 mm Number of strokes: 35 s.p.m. Weight of machine approx.: 15 ton

Category: 106: presses
New in: 1983
Price: 30.000 €
Location: Land-ua UA
Seller: ERS MANAGEMENT LTD

Capacity, ton 400 Stroke, mm 240 Strokes per minute 25 Stroke path till its position where it develops nominal capacity, mm 36 Max. distance between slider and table, mm 750 Bolster plate-to-ram adjustment, mm 20 Table size, mm 1250 x 1000 Table opening size, mm 125 Ejector travel, mm 240 Ejector capacity, ton 50 Ram ejector travel, mm 15/20 Ram ejector capacity, ton 16 Bolster plate thickness, mm 200 Press dimensions, mm 2500 x 2260 x 4515 Press weight, kg app. 36690

Category: 106: presses
New in: 1970
Price: request quote
Location: Spain
Seller: ProdEq Trading GmbH

pressure: 160 t plate thickness: 6 mm no of strokes: 72 Hub/min --------------------------------------------------: PRESS DESIGN: - drive system: knuckle-joint: - frame design: H-frame, monoblock: - feedstock transport direction: left to right: SLIDE: - total force (nominal): 160 to - stroke: 60 mm - stroke rate (max.): 72 /min COUNTER RAM: - nominal force: 40 to - stroke: 14 mm V-RING: - nominal force: 50 to - stroke: 13 mm TOOL DIMENSIONS: - shut height max.: 277 mm - ram adjustment: 80 mm STRIP-FEEDER: - feeder type: roll feeder: - sheet width max: 210 mm - sheet thickness max: 6 mm - nominal force: 6 kN - measuring wheel: no: - band lu ...

Category: 106: presses
New in: 1990
Price: request quote
Location: Land-De Germany, 50937 Köln
Seller: Gewerbe Dmitri Perfilov

Capacity: 400 ton Ram stroke: 130 mm. Ram ajustment: 12 mm. Ram stroke per Min.: 50 Shut height: 475 Bed: 500 x 500 mm. Bolster plate thickness: 100 mm. Lower ejector: - Capacity: 12 ton - Stroke: 80 mm. Uppen ejector: - Capacity: 4 ton - Stroke: 10 mm. Overal dimensions of press: - floor space: 1980 x 1240 mm - height about floor level: 2800 mm. Weight: 8,5 ton Overal dimensions of press: -floor space: 1980 x 1240 mm -height about floor level: 2800 mm. Weight: 8,5 ton

Category: 106: presses
New in: 1989
Price: request quote
Location: Land-CH Switzerland, 9527 Niederhelfenschwil
Seller: ProdEq Trading GmbH

pressure: 160 t plate thickness: mm no of strokes: 72 Hub/min --------------------------------------------------: PRESS DESIGN: - drive system: knuckle-joint: - frame design: 4 column: - feedstock transport direction: left to right: SLIDE: - total force (nominal): 160 to - stroke rate (max.): 72 /min COUNTER RAM: - nominal force: 40 to - stroke: 10 mm V-RING: - nominal force: 50 to - stroke: 12 mm TOOL DIMENSIONS: - lower table - width: 480 mm - lower table - depth: 520 mm - upper table - width: 480 mm - upper table - depth: 520 mm - distance between columns (H-frame): 500 mm - passline opening (free passage in side columns): 220 mm OVERALL SPECIFICAT ...

Category: 106: presses
New in: 2011
Price: request quote
Location: 57080 Siegen, Eiserntalstr. 235
Seller: MPS Frank Müller

Knuckle-joint press Manufacturer: Mackey presses Type: KP3. 1 N Year of construction: 2011 Hours of operation: approx. 6-10 hours Weight: 75 kg Max stroke length: 6-27 mm Press is fully functional and can be tested. Contact person Mr. Mueller see also our over 200 more deals at. (Changes and errors in the technical data, information and prices and subject to prior sale!)

Category: 106: presses
New in: 1975
Price: request quote
Location: Spain, La Pobla dC
Seller: ProdEq Trading GmbH

pressure: 320 t plate thickness: 12 mm no of strokes: 40 Hub/min --------------------------------------------------: PRESS DESIGN: - drive system: knuckle-joint: SLIDE: - total force (nominal): 320 to - stroke: 63 mm - stroke rate (min.): 10 /min - stroke rate (max.): 40 /min V-RING: - nominal force: 100 to COUNTER RAM: - nominal force: 80 to TOOL DIMENSIONS: - lower table - width: 630 mm - lower table - depth: 630 mm - upper table - width: 640 mm - upper table - depth: 640 mm - shut height max.: 355 mm - distance between columns (H-frame): 800 mm - passline opening (free passage in side columns): 360 mm STRIP-FEEDER: - feeder type: roll feeder: - sheet w ...

Category: 106: presses
New in: used
Price: request quote
Location: Land-sk SK 91101 Trencin, Gen. M.R. Stefanika 69
Seller: BASTA

Nominal effort: 2500 tons Table size: -Left-to-right: 1340 mm -Front-to-back: 1400 mm Slid stroke: 320 mm Slide adjustment: 10 mm Max. number of courses per 1 min: 65 mm Shut height: 905 mm Capacity of the electric motor: 130 kW Dimmensions: 4035x4055x7390 mm Weight: 140 tons

Category: 106: presses
New in: used
Price: request quote
Location: Land-CH Switzerland, 9527 Niederhelfenschwil
Seller: ProdEq Trading GmbH

pressure: 160 t plate thickness: 6 mm no of strokes: 70 Hub/min --------------------------------------------------: PRESS DESIGN: - drive system: knuckle-joint: SLIDE: - total force (nominal): 160 to - stroke: 60 mm - stroke rate (max.): 70 /min COUNTER RAM: - nominal force: 40 to - stroke: 14 mm V-RING: - nominal force: 50 to - stroke: 10 mm TOOL DIMENSIONS: - lower table - width: 480 mm - lower table - depth: 520 mm - upper table - width: 480 mm - upper table - depth: 520 mm - shut height max.: 314 mm - ram adjustment: 80 mm - distance between columns (H-frame): 500 mm - passline opening (free passage in side columns): 220 mm STRIP-FEEDER: - feeder typ ...

Category: 106: presses
New in: used
Price: request quote
Location: Bayern
Seller: Schrenk Werkzeugmaschinen

BURGER pneumatic knuckle-joint press To force 3 with manually retractable cassette and electric release

Category: 106: presses
New in: used
Price: request quote
Location: Land-CH Switzerland, 9527 Niederhelfenschwil
Seller: ProdEq Trading GmbH

pressure: 250 t plate thickness: 10 mm no of strokes: 60 Hub/min --------------------------------------------------: PRESS DESIGN: - drive system: knuckle-joint: SLIDE: - total force (nominal): 250 to - stroke: 61 mm - stroke rate (max.): 60 /min COUNTER RAM: - nominal force: 75 to - stroke: 15 mm V-RING: - nominal force: 75 to - stroke: 13 mm TOOL DIMENSIONS: - lower table - width: 540 mm - lower table - depth: 540 mm - upper table - width: 540 mm - upper table - depth: 540 mm - shut height max.: 320 mm - ram adjustment: 145 mm - distance between columns (H-frame): 560 mm - passline opening (free passage in side columns): 270 mm STRIP-FEEDER: - feeder ty ...

Category: 106: presses
New in: 1985
Price: request quote
Location: Bruchsal
Seller: KAI-Tec Technologie-Vertrieb GmbH & Co.KG

Knuckle-joint press SUSTAN T 9125 13-19-001 shipping time: immediately number: 13-19-001 manufacturer: Sustan type: T 9125 MACHINE data year: approx. 1985 L x W x H: CA. 300 x 500 x 800 mm weight: approx. 100 kg Very good condition - 2 pieces available technical data maximum pressing force: approx. 2.5 tons hub: approx. 80 mm maximum installation height: approx. 150 mm Tischaufspannï¬?äche: approx. 270 x 170 mm Aufspannnuten: 1 - 14 mm stamp - installation Ã?: approx. Ã? 20 mm table hole: dia. 50 mm accessories â?¢ quantity counter accessories on request price and other specifications on request

Category: 109: other metal working machines
New in: 2003
Price: request quote
Location: DE-78234 Engen
Seller: ProdEq Trading GmbH

pressure: 300 t no of strokes: 200 Hub/min sheet width: mm --------------------------------------------------: PRESS DESIGN: - drive system: knuckle-joint: - frame design: H-frame, tie rod: - openings in uprights: yes: - table cushion: no: - opening in table: yes: PRESS FORCES: - total force (nominal): 300 to PRESS TABLE: - table surface (left-right): 900 mm - table surface (front-back): 800 mm - thickness of bolster plate: 160 mm - height above floor level: 1000 mm - opening in bed (left-right): 250 mm - opening in bed (front-back): 60 mm SLIDE: - slide force: 300 to - table surface (left-right): 700 mm - table surface (front-back): 700 mm - stroke: 6 ...

Category: 106: presses
New in: 1985
Price: request quote
Location: Land-De Germany, 50937 Köln
Seller: Gewerbe Dmitri Perfilov

Capacity: 400 ton Ram stroke: 130 mm. Ram ajustment: 12 mm. Ram stroke per Min.: 50 Shut height: 475 Bed: 500 x 500 mm. Bolster plate thickness: 100 mm. Lower ejector: - Capacity: 12 ton - Stroke: 80 mm. Uppen ejector: - Capacity: 4 ton - Stroke: 10 mm. Overal dimensions of press: - floor space: 1980 x 1240 mm - height about floor level:2800 mm. Weight: 8,5 ton

Category: 106: presses
New in: 1991
Price: request quote
Location: Lager Eislingen, Baden-Württemberg
Seller: Vögtle Service GmbH

Pressure:160 t distance between columns:1180 mm stroke:5 - 120 mm Distance table/ram, max. stroke up, adjustment up:490 mm no. of strokes:80 /min table surface area:1100 x 700 mm table height over floor:1040 mm side window:400 mm ram surface:900 x 500 mm ram adjustment:100 mm oil volume:1200 l material width of feeder:400 mm material thickness of feeder: - 4,0 mm feed length:0,1 - 6500 mm material width waste cutter:400 mm material thickness waste cutter: - 4,0 mm material cross-cut:1200 mm² power requirement:45,0 kW weight:12,0 t dimensions (WxDxH):2,5 x 1,9 x 3,7 m list price: in running function in our warehouse: German Safety: permitted for manual loading:UVV 11.064 - VBG 7n5.2 knuckle- ...

Category: 106: presses
New in: used
Price: request quote
Location: Land-bg BG
Seller: MachTechnica Ltd.

Knuckle Joint Forging Press PINSK KB 8336 400T YOM 1991, Mach No. 1001 Maximum force: 400 to Table dimensions : 500x500 mm Ram stroke, minimum: 130 mm Number of strokes per minute : 50 Distance between Plate Stamp & Slider: 475 mm Adjustment Bolster & Slider: 12 mm

Category: 106: presses
New in: 1971
Price: request quote
Location: Lager Eislingen, Baden-Württemberg
Seller: Vögtle Service GmbH

pressure:050 t stroke fine blanking table:12 mm distance between columns:450 mm tool height:140 - 220 mm lower table (W x D):420 x 420 mm knife-edged ring capacity:3 - 25 t counter pressure:0,3 - 22 t capacity of ejector:2 - 4 t ejector stroke:8 mm side window:200 mm upper table (W x D):420 x 420 mm adjustment upper table:80 mm material width of feeder:180 mm material thickness of feeder:5,0 mm feed length max.:180 mm power requirement:4,5 kW weight:6,0 t dimensions (WxDxH):2,1 x 1,8 x 2,6 m list price: WITHOUT putting into operation: knuckle-joint press:hydraulic driven ejector:hydraulic ram movement:from the bottom to the top fine blanking table:for fix and movable dies movable table: adju ...

Category: 106: presses
New in: 1961
Price: request quote
Location: Land-De Germany, 50937 Köln
Seller: Gewerbe Dmitri Perfilov

Nominal capacity: 800 t. Ram stroke: 160 mm Ram stroks in Min. 33 Ram stroke ajustment: 15 mm Shut height: 630 mm

Category: 106: presses
New in: 1988
Price: request quote
Location: Lager Eislingen, Baden-Württemberg
Seller: Vögtle Service GmbH

pressure:100 t distance between columns:1180 mm stroke:1 - 120 mm no. of strokes:90 /min distance table/ram, stroke up:470 mm table surface area:1100 x 700 mm table height over floor:800 mm side window:400 mm ram surface:740 x 350 mm ram adjustment:100 mm power requirement:37,0 kW weight:11,0 t dimensions (WxDxH):2,3 x 2,0 x 3,5 m list price: in running function in our warehouse: knuckle-joint press:hydraulisch angetrieben conrollable dependant on pressure and way: two-hand operation: T-slots in table and ram acc. to specification:auf Anfrage foundation pit:nicht erforderlich

Category: 106: presses
New in: 1992
Price: request quote
Location: Neuenhöhe 31, 42929 Wermelskirchen, DE
Seller: Köke Pressen

Force: 800 tons Daylight: 360mm Distance between columns: 600mm Table: 590x650mm Ram: 590x450mm Stroke: 100mm Strokes per minute: 45 Requested power: 22KW Weight 17 tons Height: 3075mm

Category: 106: presses
New in: 1966
Price: request quote
Location: Land-ua UA
Seller: ERS MANAGEMENT LTD

Press force at the end of stroke: 2000 t Slide stroke: 200 mm Number of slide strokes per minute: 17 Adjustment of interstamping space: 15 mm Max. distance between table and slide in its lower position: 830 mm Distance between guides in daylight: 1040 mm Bolster plate dimensions: -From front - to back: 1300 mm -From right - to left: 1270 mm Size of the opening in the table - diameter: 130 mm Slide dimensions: -From front - to back: 800 mm -From right - to left: 1250 mm Main electric motor: -Type: 82-4 -Power: 55 kW -RPM: 1380 Electric motor of adjustment: -Type: 52-6 -Power: 4,5 kW -RPM: 950 Press weight: 75107 kg

Category: 817: presses: letterpress
New in: used
Price: request quote
Location: D - Brandenburg
Seller: 3p Vertriebsgesellschaft mbH

Book printing press knuckle-joint press CHR. Dingler Zweibrücken from 1840 No. 962 Christian Dingler (née 15 February 1802 in Zweibrücken, Germany; d. 18 December 1858 -) was the founder of the Dinglerwerke Zweibrücken, and developer of Dinglerpresse; verry good

Category: 106: presses
New in: 1964
Price: request quote
Location: Land-ua UA
Seller: ERS MANAGEMENT LTD

Press force at the end of stroke: 2000 t Slide stroke: 200 mm Number of slide strokes per minute: 17 Adjustment of interstamping space: 15 mm Max. distance between table and slide in its lower position: 830 mm Distance between guides in daylight: 1040 mm Bolster plate dimensions: -From front - to back: 1300 mm -From right - to left: 1270 mm Size of the opening in the table - diameter: 130 mm Slide dimensions: -From front - to back: 800 mm -From right - to left: 1250 mm Main electric motor: -Type: 82-4 -Power: 55 kW -RPM: 1380 Electric motor of adjustment: -Type: 52-6 -Power: 4,5 kW -RPM: 950 Press weight: 75107 kg

Category: 106: presses
New in: 1985
Price: request quote
Location: Land-De Germany, 50937 Köln
Seller: Gewerbe Dmitri Perfilov

Nominal force t 180 Bearing Distance Pressesframe mm 390 Shut height mm 305 Stroke of tool holder mm 50 Adjustment of top tool holder mm 40 Platen area of bed mm 370 x 450 Platen area of top tool holder mm 360 x 200 Pinhole in top tool holder Ø x T 40 x 75 Number of strokes min.-1 60 Drive motor power kW 5,5 Main drive motor speed Min-1 1450 Ejector: Stroke mm 30 Force t 6 Mass t 4 Overal dimensions B x T x H mm 950 x 1710 x 1925

Category: 106: presses
New in: used
Price: request quote
Location: Land-De Germany, 50937 Köln
Seller: Gewerbe Dmitri Perfilov

Capacity: 4000 ton Ram stroke: 185 mm. Ram stroke per Min.: 15 Shut height: 1900 mm. Ajustment between ram and bed: 20 mm. Bed: - from left to right: 1600 mm. - from front to bed: 1600 mm. Ram: - from left to right: 1120 mm. - from front to bed: 1120 mm. Distance between guides in the daylight: 1220 mm. Distance from the surface of rotary Bed to the guides: 1400 mm. Distance from the frame`s bed to surface of rotary bed: 500 mm. Qnt. of position of rotary bed: 5 Capacity of ejector: 80 t. Ejector stroke, Min/Max, mm.: 120 / 145 mm. Main Motor power: 125 kW Press dimensions, LxB: 5800 x 7600 m ...

Category: 106: presses
New in: 1996
Price: request quote
Location: D - Nordrhein-Westfalen
Seller: Köke Pressen

Force: 800 tons Windows: 300mm Daylight: 500mm Table: 600x650mm Ram: 500x500mm Ram adjustment: 10mm Stroke: 150mm Strokes per minute: 30 Requested power: 20 kW Weight: 27 tons Height: 3.700mm Width: 2.500mm Depth: 2.200mm Floorstanding; very good

Category: 106: presses
New in: 1964
Price: request quote
Location: Land-de DE
Seller: Gewerbe Dmitri Perfilov

Capacity: 2000 ton Ram stroke: 200 mm Ram stroke in Min.: 17 Ajustment between ram and bed: 15 Shuth height: 830 mm. Distance between frame`s guides: 1040 mm Dimensions LxWxH: 2900 x 3300 x 6120 mm Press total weight : 75170 kg

Category: 106: presses
New in: 1960
Price: request quote
Location: Land-de DE
Seller: Gewerbe Dmitri Perfilov

Capacity: 2000 ton Ram stroke: 280 mm Ram stroke in Min.: 18 Shuth height: 830 mm. Distance between frame`s guides: 1040 mm Bed: 1300 x 1300 mm. Tension of the elec. system: 380 V Frequency of elec. system 50 Hz Main el. motor: 56 kW Working air pressure: 6 atm. Press total weight : 109600 kg

Category: 106: presses
New in: 1985
Price: request quote
Location: Land-by BY
Seller: Kipling Holding

Nominal force: 180 tons Shut height: 305 mm Slide stroke: 50 mm Table surface: 450x370 mm Tool holder adjustment, upper: 40 mm Slider size: 360x200 mm Slider gap: 40x75 mm Strokes per minute: 60 Drive motor power: 5.5 kW Drive motor speed: 1440 rpm Total power requirement: 11 kW Dimensions: 2000x1350x2250 mm Weight: 6300 kg

Category: 106: presses
New in: 1989
Price: request quote
Location: Land-by BY
Seller: Kipling Holding

Capacity 600 ton Stroke 80 mm Strokes per minute 45 Shut height 280 mm Friction Clutch Guards Strain Gauges

Category: 106: presses
New in: 1980
Price: request quote
Location: Land-by BY
Seller: Kipling Holding

Technical specification: Force: 250 ton Stroke of slide: 180 mm Strokes per min 55 Adjustment of slide: 100 mm Shut height: 680 mm Slide area (WxD): 880 x 860 mm Bed area (WxD): 900 x 900 mm Width between columns: 900 mm Press weight: 15 ton

Category: 106: presses
New in: 1978
Price: request quote
Location: Land-by BY
Seller: Kipling Holding

Knuckle joint cold forging extrusion press BARNAUL K 0036 400 ton Nominal effort kN 4000 Slide stroke, mm 240 The distance between table and slider, mm 750 Frequency slider continuous strokes 1 / min 25 Table dimensions: width, length mm 1000 - 1250 Main drive power / power total kW 55 Dimensions, mm 2260_2500_4165 Weight, kg 36510

Category: 106: presses
New in: 1976
Price: request quote
Location: Land-by BY
Seller: Kipling Holding

Knuckle joint press BARNAUL K846B Specification: Pressure: 800 tons Number of strokes per minute: 45 Slide stroke: 160 mm Adjustment of rod length: 15 mm Closed height: 650 mm Max. distance between table and slide in its lower position: 630 mm Distance between guides: 670 mm Height of a table above floor: 700 mm Press dimensions: -Left-to-right: 2350 mm -Front-to-back: 2300 mm -Height: 4460 mm Press weight: 32000 kg

Category: 106: presses
New in: 2017
Price: request quote
Location: Land-by BY
Seller: Kipling Holding

Renew knuckle joint extrusion press Barnaul K0034 Technical specification: Capacity of press, kN 2500 Constant press stroke, mm 200 Slider stroke per minute 32 Distance between die bed and press slide in its lower position with up position of adjustment, mm 630 Adjustment 15 mm Slider dimensions: 600 x 600 mm Bed dimensions: 800 x 1000 mm Top ejection stroke, mm 2025 Top ejection force, MN 10 Bottom ejection stroke, mm 110 Bottom ejection force, MN 30 Main drive 75 kW Press dimensions 1950x2030x3654 mm Weight 21 255 kg

Category: 106: presses
New in: 1980
Price: request quote
Location: Land-by BY
Seller: Kipling Holding

Knuckle joint press VORONEZH K 8344 2500 ton Condition: very good, already dismantled, ready for dispatch. Time of delivery: prompt Technical specification: Force, ton 2500 Slider stroke length, mm 190 Number of courses of a slider per minute 20 Shut height, mm 800 Adjustment, mm 20 Size of a working course of slider before its extreme bottom position corresponding nominal force, mm 4,5 Table overall dimensions: mm - from front to rear 1400 - from left to right 1250 Thickness of a under-forging plate, mm 230 The size of a slider in front-back, mm 900 force of the bottom pusher, ton-force 75 stroke of the bottom pusher, mm 190 Distance between guides, mm 950 Tota ...

Category: 106: presses
New in: 1979
Price: request quote
Location: Land-by BY
Seller: Kipling Holding

KNUCKLE JOINT COLD FORGING EXTRUSION PRESS KIESERLING & ALBRECHT KKPRF 630/900/260 Condition: excellent, very well maintained. Absolutely running condition. Can be inspected under power. Video of the press working could be watched here abcs://youtu.be/hNfzMOAIDX4 Press Kieserling KKPRF 630/900/260 can be used in two different modifications: 1. as cold forging extrusion press with capacity of 630 tones 2. as knuckle joint press with capacity of 900 tones Technical specification: Pressing power 630 t Manufacturer Kieserling Type KPRF 630/900/260 Mode of operation mechanical Table size (left to right) 900 mm Table size (front to back) 900 mm Ram (left to right) 900 mm Ram (front ...

Category: 106: presses
New in: 2017
Price: request quote
Location: Land-by BY
Seller: Kipling Holding

Renewed knuckle joint press K8336 This press is offering with 3 possible options of retrofitting. Option 1: Condition: full retrofit of mechanical parts, pneumatic and lubrication system. Electric and a control panel should be installed at your side. Option 2: Additional installation of full brand new modern electric system with PLC. Safety system, operator protection system, overload protection, main motor speed control, counter for ram press position, HMI. System based on the DELTA (Taiwan), Mitsubishi, Samcoon PLC Warranty for all press systems: 6 months New manual will be delivered along with the press, as well as checklist Option 3: System based on the SIEMENS PLC ...

Category: 106: presses
New in: 2017
Price: request quote
Location: Land-by BY
Seller: Kipling Holding

Renew Knuckle joint press Barnaul KB 8336 400t This press is offering with 3 possible options of retrofitting. Option 1: Condition: full retrofit of mechanical parts, pneumatic and lubrication system. Electric and a control panel should be installed at your side. Option 2: Additional installation of full brand new modern electric system with PLC. Safety system, operator protection system, overload protection, main motor speed control, counter for ram press position, HMI. System based on the DELTA (Taiwan), Mitsubishi, Samcoon PLC Warranty for all press systems: 6 months New manual will be delivered along with the press, as well as checklist Option 3: System based on th ...

Category: 106: presses
New in: 1984
Price: request quote
Location: Land-de DE
Seller: Gewerbe Dmitri Perfilov

Capacity: 250 ton Ram stroke: 120 mm. Ram ajustment: 12 mm. Ram stroke per Min.: 60 Shut height: 300 Bed: 400 x 400 mm. Bolster plate thickness: 80 mm. Lower ejector: - Capacity: 8 ton - Stroke: 70 mm. Uppen ejector: - Capacity: 2,5 ton - Stroke: 10 mm. Main drive motor power: 8,5 kW Overal dimensions of press: - floor space: 1745 x 1150 mm - height about floor level: 2585 mm. Weight: 5,5 ton - Subject to prior sale – - Prior to errors and technical condition –

Category: 106: presses
New in: used
Price: request quote
Location: Land-de DE
Seller: Erwin Knoll Import & Export

Eccentric press knuckle-joint press stamping press - MAYPRES - MKN 1-30/5 Width: 70cm Depth: 100cm Height: 150cm 30 tons 80 pressure working stroke per minute Adjustable 35mm Workspace 245 mm Throat depth 110mm On chip surface 260x410mm Weight 1050kg With two-hand operation, power 1,5 kW Electricity 16A. Fully functional with electrical diagram spare parts documentation and operating instructions excellent condition can be viewed on-site and tried out. Shipping abroad. Visit: Basically I would like to point out that the article may be viewed and tested under power to exclude misunderstandings, like before you buy. Please ask questions before you purchase to avoid ambiguity. For general qu ...

Category: 106: presses
New in: 1970
Price: request quote
Location: Land-de DE
Seller: Gewerbe Dmitri Perfilov

Capacity: 2500 ton Ram stroke: 190 mm. Аjustment between ram and bed: 20mm. Ram stroke per Min.: 15 Shut height: 800 mm Bed: 1250 x 1400 mm Ram: 1250 x 900 mm Main motor: 77 Press dimensions: - From left to right: 4800 mm - From front to back: 3340 mm - Height above floor level: 5880 mm Weight of press, approx.: 125 t.

Category: 106: presses
New in: used
Price: request quote
Location: Land-de DE
Seller: Gewerbe Dmitri Perfilov

Nominal capacity, t. 800 Ram stroke, mm 160 Rram stroks in Min. 45

Category: 703: meat and fish processing machines
New in: 2011
Price: request quote
Location: Land-pl PL
Seller: DROBTECH

Meyn WLD whole leg deboner Chicken legs are supplied in crates, cartons or separated on a conveyor belt. The leg should be pre cut (manually) by making an incision lengthwise start from just below drum, along the knee joint until the thigh knuckle. And then an incision to cut the oyster to remove muscle attachment between thigh knuckle and oyster. Oyster is a small, round piece of dark meat on the back of the poultry near the thigh. The legs are loaded manually and automatically fixed into the product carriers of the machine by closing the bottom part of the unit, and push down the knife over the drum joint. The product carriers take the legs through a sequence of process steps: & ...

Category: 106: presses
New in: 1981
Price: 35.000 €
Location: Land-ua UA
Seller: ERS MANAGEMENT LTD

Capacity, ton 400 Stroke, mm 240 Strokes per minute 25 Stroke path till its position where it develops nominal capacity, mm 36 Max. distance between slider and table, mm 750 Bolster plate-to-ram adjustment, mm 20 Table size, mm 1250 x 1000 Table opening size, mm 125 Ejector travel, mm 240 Ejector capacity, ton 50 Ram ejector travel, mm 15/20 Ram ejector capacity, ton 16 Bolster plate thickness, mm 200 Press dimensions, mm 2500 x 2260 x 4515 Press weight, kg app. 36690

You didn't find your wanted machine? send wanted inquiry to all dealers (no registration necessary)