knife grinder used for sale

1X RESERVE KNIFE FOR EBA 551 LT Format (cm): 55

- Mobile knives units for additional knife fold MBO and Grafica - Can be used on combi or buckle folders for various configurations ( Mbo, Stahl, etc. )

HAULICK Roll Sheet Shears / Circular Knife Shears -Max. sheet steel: approx. 2.5 mm -Cutting length: endless (unlimited) -Cutting method: 2 rotating circular knives -Cutting blade diameter: approx. 120 – 150 mm - Table size: approx. 500 x 250 mm -Projection / feed range: approx. 250 mm -Motor power: 0.75 – 1.1 kW -Drive: Belt drive -Straight cuts -Strip cutting -Endless cutting of metal sheets -Sheet steel up to approx. 2.5 mm -Aluminium and non-ferrous metals correspondingly stronger Dimensions: LxWxH 0.6x0.9x1.1 meters / Weight 180Kg

4th+5th knife kit for Müller Martini 890 trimmer, Müller Martini, Model 890, Year 1995, part numbers 0890.4350 + DSS2609 + (2x) 890.2662 + (2x) 890.2609, Knives included, Details for 2-up productions, Available Direct

Band Knife Cutting Machine R1150 The KTK PROFI band knife is a high-performance system for precise cutting of various textile elements such as: - Fabrics - Knitwear - coated and impregnated fabrics - Insulation materials - Upholstery foam Good condition, fully functional, can be viewed and tried out on site. Shipping also abroad. Viewing: Basically, I would like to point out that the article can be viewed and tested under power before purchase in order to rule out misunderstandings. Please ask questions before purchasing to avoid confusion. If you have any general questions or would like to make an appointment for a viewing, I can be reached at any time on the telephone number below or above. Errors in the description and prior sale excepted. VAT is shown separately on my invoices. Shipping with forwarding agent.

Measuring Cup Attachment Manufacturer: Montech Type: Year of Make: 2012 For measuring cups 2.5-15 ml for PP28 closure Measuring cup Ø 37/30 mm, height 28 mm Feed hopper with steep conveyor, mobile Steep conveyor plastic webbing white, belt width 500 mm, belt length 2,200 mm, bridge distance 120 mm, web height 25 mm Measuring Cup Sorting Pot with Enclosure Transfer conveyor to the transfer robot Transfer robot with horizontal and vertical axis Suction arm for 3 measuring cups for transfer to bottle conveyor belt Bottle size Ø max. 90 mm, height max. 140 mm PLC Siemens S7-200 HMI Siemens TD 200 Drive 220/24V/50Hz

Total of 2 pieces, Unused, Item No.: 12651380540, Type: 66-12-IK-Z6, further details see photos

Total of 3 pieces, Unused, Item No.: 12651380520, Type: 52-12-IK-Z4, further details see photos

Mobil Knife Folding Unit Heidelberg VFZ-52.D Vierbruchfalzwerk Schwertfalzwerk / Mobil Knife Folding Unit Heidelberg VFZ-52.D Four-directional folding unit - Vierbruchfalzwerk Baujahr / Year 2001- Serial-No. 703796-297059 Format / Sheet Size min. 120 x 100mm Format / Sheet Size min. 520 x 360mm Geschwindigkeit / Speed 25 - 160 m/min Taktzahl / Cycle rate max. 30.000(T/h) Einlaufhöhe / Infeed height 51,5 – 91,5cm Schwertposition / Knife position 180° schwenkbar / 180° pivotable zum Anschluss an Maschinen mit DCT Steuerung / to connect on machines with DCT Control

Mobile Knife Folding Unit GUK ZG 500 Schwertfalzwerk / Mobile Knife Folding Unit GUK ZG 500 Baujahr / Year 1999 - Serial-No. 40094 Einlaufbreite / Infeed width min. 150mm - max. 480mm Einlauflänge / Infeed length min. 80mm - max. 320mm Einlaufhöhe / Infeed height min. 450mm - max. 650mm Geschwindigkeit / Speed min. 40m/min - max. 160m/min Produktivität / Productivity 20.000 cycles/h Messerfalzwerk ist getestet und  in einem guten Zustand, getestet. Mit Eigensteuerung Elektronische Steuerung. Zum Anbau an Falzmaschinen von GUK, Heidelberg - Stahl oder MBO, sowie an Fremdmaschinen wie Sammelhefter, Zusammentragmaschinen usw. The knife folding unit has been tested and is in good working order. It has its own electronic control system. For mounting on folding machines from GUK, Heidelberg-Stahl, or MBO, as well as on third-party machines such as saddle stitchers, collators ...

Mobiles Schwertfalzwerk mit Eigensteuerung / Mobile Knife Folding Unit with SelfControl MBO Z2 Mobiles Schwertfalzwerk Eigensteuerung / Mobile Knife Folding Unit SelfControl MBO Z2 Year 1995 - Serial-No. 44951206-A Einlaufbreite / Infeed width min. 150mm - max. 480mm Einlauflänge / Infeed length min. 80mm - max. 320mm Einlaufhöhe / Infeed height min. 450mm - max. 650mm Geschwindigkeit / Speed min. 20m/min - max. 210m/min Produktivität / Productivity 15.000 cycles/h

Three Knife Trimmer with automatic infeed belt for Inline or Offline production Dreimesserautomat / Three Knife Trimmer Wohlenberg 44 FM 50 Baujahr / Year 1988 - Serial-No. 3296-013 Format / Size max.  315 x 440mm  Thicknes max. 100mm Speed max. 3000 cycles per hour Automatischer Einlauf / Specification automatic feeding Bandauslage / Belt delivery

Dreimesserautomat von Heidelberg in einem guten Zustand. Three Knife Trimmer of Heidelberg in good condition. Dreimesserautomat / Three Knife Trimmer Heidelberg Eurotrim ET1000  Baujahr / Year 2010 - Serial-No. FM.EBAA-00047 Mechanische Leistung / Mechanical performance    max. 1,000 cycles/h Buchblock Breite unbeschnitten / Book Block width untrimmed 110 - 345mm  Buchblock Höhe unbeschnitten / Book Block high untrimmed 110 - 480mm  Buchblock Breite beschnitten / Book Block width trimmed 90 - 330mm  Buchblock Höhe beschnitten / Book Block high trimmed 100 - 470mm  Höhe des zu schneidenden Materials / Height of material to be cut 2 mm–60 mm Druckluftversorgung / Compressed air supply 6bar Stromversorgung / Power supply 400 V, 50 Hz, 3 phases + N + PE / 20 A / 8.0 kVA Maschinenabmessung /Dimensions (LxWxH) 3130 x 960 x 1620mm Maschi ...

Three Knife Trimmer Kolbus HD 140.P with Copilot and automatic infeed Dreimeserautoat / Three Knife Trimmer Kolbus HD 140 P Baujahr / Year 2000 - Serial-No. 347 Format / Size max 305 x 420mm Formatbereich beschnitten / Size (trimmed) min. 100 x 100mm - max. 300 x 400mm Buchblock Stärke / Book block thickness min. 2mm - max. 80mm Stapelhöhe / Feeding height 80mm Mechanische Laufleistung / Speed max. 3.900 c/h Rechtseinfuhr / Infeed from right Equipment: Copilot automatic infeed automatical speed Regulation automatic lock of knife adjustment and pressing block automatic setting of bookblock pressure

1X RESERVE KNIFE FOR POLAR 92E Format (cm): 92

New 3M long Auction-ID: A3-46142-11347

Set of 10 pneumatic cylinder knife gate valves – AKO Set of 10 identical valves (description and photos valid for each valve). This AKO pneumatic cylinder knife gate valve is designed for flow opening and closing operations in industrial and food environments. Its configuration, combined with pneumatic control, a flanged body and position control equipment visible in the photos, makes it a robust and immediately usable second-hand solution to complete a transfer or process line. Technical data Brand: AKO Type: knife gate valve Control: pneumatic cylinder Flanged valve body Condition: used Equipment 1 pneumatic cylinder 1 solenoid valve Metal Work Pneumatic coil 24 V DC – 5 W Reference: SOV 35 SOS 00 1 detector / mechanical limit switch Detector reference: ZCK-M1 Location: Monteux (84) Equipment sold loaded on truck: dismantling and loading offered by the seller. Auction-ID: ...

Set of 10 pneumatic cylinder knife gate valves – AKO Set of 10 identical valves (description and photos valid for each valve). This AKO pneumatic cylinder knife gate valve is designed for flow opening and closing operations in industrial and food environments. Its configuration, combined with pneumatic control, a flanged body and position control equipment visible in the photos, makes it a robust and immediately usable second-hand solution to complete a transfer or process line. Technical data Brand: AKO Type: knife gate valve Control: pneumatic cylinder Flanged valve body Condition: used Equipment 1 pneumatic cylinder 1 solenoid valve Metal Work Pneumatic coil 24 V DC – 5 W Reference: SOV 35 SOS 00 1 detector / mechanical limit switch Detector reference: ZCK-M1 Location: Monteux (84) Equipment sold loaded on truck: dismantling and loading offered by the seller. Auction-ID: ...

Set of 6 pneumatic cylinder knife gate valves – AKO Set of 6 identical valves (description and photos valid for each valve). This AKO pneumatic cylinder knife gate valve is designed for flow opening and closing operations in industrial and food environments. Its configuration, combined with a pneumatic control, a flanged body and position control equipment visible in the photos, makes it a robust and immediately usable second-hand solution to complete a transfer or process line. Technical data Brand: AKO Type: knife gate valve Control: pneumatic cylinder Flanged valve body Condition: used Equipment 1 pneumatic cylinder 1 solenoid valve Metal Work Pneumatic coil 24 V DC – 5 W Reference: SOV 35 SOS 00 1 detector / mechanical limit switch Detector reference: ZCK-M1 Location: Monteux (84) Equipment sold loaded on truck: dismantling and loading offered by the seller. Auction-ID: ...

Equipped with straight Frangor blades; hydr lifting jack; HYDR adjustment roller; no role present; 8 crosses Auction-ID: A1-47396-1034

Lot of 2 knife boxes – New in box Lot consisting of 2 boxes of new knives, in their boxes. Important information – to be read before bidding Goods from end-of-series and surplus, sold as is. The information in this description (quantities, capacities, dates, composition) is provided by the seller. The photos, quantities, dimensions and weight are not contractual. The appearance of the packaging and products may vary from one item to another. A visit is strongly recommended before bidding. The buyer bids with full knowledge of the facts and remains solely responsible for his or her assessment of the lot. Auction-ID: A1-51086-163

Set of 50 complete knife sets – New in their box Set of 50 complete sets of new knives, individually presented in their case. Important information – to be read before bidding Goods from end-of-series and surplus items, sold as is. The information in this description (quantities, capacities, dates, composition) is provided by the seller. The photos, quantities, dimensions and weight are not contractual. The appearance of the packaging and products may vary from one item to another. A visit is strongly recommended before bidding. The buyer bids with full knowledge of the facts and remains solely responsible for his or her assessment of the lot. Auction-ID: A1-51086-260

Lot of 2 knife boxes – New in box Lot consisting of 2 boxes of new knives, in their boxes. Important information – to be read before bidding Goods from end-of-series and surplus, sold as is. The information in this description (quantities, capacities, dates, composition) is provided by the seller. The photos, quantities, dimensions and weight are not contractual. The appearance of the packaging and products may vary from one item to another. A visit is strongly recommended before bidding. The buyer bids with full knowledge of the facts and remains solely responsible for his or her assessment of the lot. Auction-ID: A1-51086-161

Lot of 50 knife boxes – New in a box Lot of 50 boxes of new knives, in their boxes. Important information – to be read before bidding Goods from discontinued series and surplus, sold as is. The information in this description (quantities, capacities, dates, composition) is communicated by the seller. The photos, quantities, dimensions and weights are not contractual. The appearance of the packaging and products may vary from one item to another. A visit is strongly recommended before bidding. The buyer bids with full knowledge of the facts and remains solely responsible for his or her assessment of the lot. Auction-ID: A1-51086-145

industrial shut-off and flow-control valves, predominantly knife-gate valves and butterfly valves in various sizes and configurations. Suitable for industrial process, water, wastewater and similar piping applications. The lot includes manually operated valves with handwheels as well as several fitted with electric and/or pneumatic actuators. Visible manufacturers/components include VAG, Regada and others. A VAG ZETA knife-gate valve is identifiable among the equipment. Details: Type: Industrial shut-off / isolation valves Predominantly knife-gate and butterfly valves Various nominal diameters and connection sizes Flanged and wafer-style configurations Manual handwheel-operated units Electric actuator-equipped units Pneumatic actuator-equipped units Various manufacturers and models Quantity: 1 mixed pallet, contents as pictured Auction-ID: A1-51282-38

Set of 4 complete knife sets – New in their box Lot including 4 complete sets of new knives. Each box is presented in its case. Important information – to be read before bidding Goods from end-of-series and surplus products, sold as is. The information in this description (quantities, capacities, dates, composition) is provided by the seller. The photos, quantities, dimensions and weight are not contractual. The appearance of the packaging and products may vary from one item to another. A visit is strongly recommended before bidding. The buyer bids with full knowledge of the facts and remains solely responsible for his or her assessment of the lot. Auction-ID: A1-51086-442

Lot of 2 knife boxes – New in box Lot consisting of 2 boxes of new knives, in their boxes. Important information – to be read before bidding Goods from end-of-series and surplus, sold as is. The information in this description (quantities, capacities, dates, composition) is provided by the seller. The photos, quantities, dimensions and weight are not contractual. The appearance of the packaging and products may vary from one item to another. A visit is strongly recommended before bidding. The buyer bids with full knowledge of the facts and remains solely responsible for his or her assessment of the lot. Auction-ID: A1-51086-162

HBM Drill Sharpener, Drill Grinder From 3 to 13 mm In just three simple steps, you can ensure that blunt, worn drills are extremely sharp again. The grindstone at the drill grinder consists of diamond and is therefore extremely hard. That way you always achieve the desired results quickly. You can be sure of a good result, especially with HSS drills. In this way, this device is perfect for use in industrial workshops. Furthermore, the sharpener is suitable for use on just about any type of drill. So it is a flexible tool. Auction-ID: A1-40900-78

The machine is technical and geometrically in a very good state. it was till 2years in use an application and any time inbetrieb are taken. Grter draggable Durchme?er 60 mm the smallest tench-cash Durchme?er 0.5 mm Schleifscheiben-Durchme?er 356 mm Schleifdcheiben width 150 mms control disc-Durchme?er 254 mms control discs width 150 mms Drehzahl-Schleifscheibe 1,780 revo impulse achievement main engine 7 kW speed-control disc 20-250 revos weight 2,900 kg Platzbetarf 8 m²

Surface grinding machine

Discus level sanding machine with Vertikaler-Schleifspindel and Schleifradaufnahme f?r Ceramische-Schleifsegmente. Construction year 1957 the machine is technical and geometrically in very good state. it was waited up to Au?erbetriebsetzung 2006 regelmig. hydraulic table impulse: infinitely variable adjustably vertical delivery: hydraulically Schleifrad-Durchme?er: 600 mms impulse achievement: 22 kW Magnetabme?ung: 300 x 1,000 mms Schleiftischabme?ung: 400 x 1,700 mms

Number of sanding units: 2 St. sanding width: 100,150 mm Sanding height max.: , The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

K+G Wetter Angle-Grinder E 130mm, 130mm, all stainless steel, 2 speeds, sorting device, in very good condition. The machine is immediatley available and can be inspected in our facility in Koblenz, Germany.

Machine type: YE 60 Manufacturer: ERBA Power kW: 0.3 Total volume: 50 lt. Description: The ERBA separation line YE 60 is used to separate workpieces and grinding medium. This can be used as a stand-alone machine or in combination with other machines, such as the ERBA Turbo (centrifugal power system). The separation floor can be changed quickly and easily depending on the requirements. Optionally, a frequency converter can be installed, which enables the infinitely variable adjustment of the motor speed. The price quoted is net plus the currently valid statutory sales tax and plus freight costs. The pictures can show the system including accessories, which are optionally available and associated with additional costs. The price quoted refers to the basic machine. If you are interested, we look forward to hearing from you. We will be happy to advise you without obligation.  ...

Key data: 350 mm, 1470

Machine type: Turbo 60 Manufacturer: ERBA Power kW: 3.0 Total volume: 60 lt. Description: The ERBA Turbo 60 is a centrifugal system for deburring, smoothing and shining small to medium-sized workpieces. The machine has a digital process timer, as well as a digital speed display. The platter speed can be adjusted by means of a frequency converter. The Turbo 60 is available in dry and wet versions. It can be linked to the separation section listed below. The price quoted is net plus the currently valid statutory sales tax and plus freight costs. The pictures can show the system including accessories, which are optionally available and associated with additional costs. The price quoted refers to the basic machine. If you are interested, we look forward to hearing from you. We will be happy to advise you without obligation. The European Commission provides a platform for ...

Seydelmann AU 200-B, 200 mm automatic grinder, all stainless steel, hopper capacity approx. 400 litres, 2 working worm speeds, 3 feeding worm Speeds, refurbished. The machine is immediately available, and can be tested in our facility in Koblenz, Germany.

Machine type: ESA 15 Manufacturer: ERBA Power kW: 3.37 Bdw3H9Emd2R Mud basket volume: 15 lt. Description: The ESA 15 recirculating centrifuge from ERBA (patent no.: 201606464) is a professional stand-alone system for the treatment of process water for mass finishing systems. It has a waste water tank with agitator, as well as a pure water tank and can produce up to 600 litres of fresh water per hour. Dirt particles are separated from the process water with 1500 g force and removed as a solids cake. The programmable logic controller (PLC) with touchscreen makes the condition of the machine particularly simple. The ESA 15 is also very space-saving due to its compact design. The price quoted is net plus the currently valid statutory sales tax and plus freight costs. The pictures can show the system including accessories, which are optionally available and associated with addi ...

Key data: 490 mm, 1120 , 990

Machine type: EVP 250 Manufacturer: ERBA Power kW: 1.5 Total volume: 250 lt. Description: The EVP 250 vibratory finishing machine from ERBA has a flat work container base without separation. Emptying or separation is carried out via bottom emptying (manual/pneumatic). It has an electrical control cabinet and can be equipped with a fully automatic PLC process control (optional). On request, a reinforced suspension and a reinforced motor can be installed for higher loads. The motor speed can be infinitely variable by means of a frequency converter (optional). The price quoted is net plus the currently valid statutory sales tax and plus freight costs. The pictures can show the system including accessories, which are optionally available and associated with additional costs. The price quoted refers to the basic machine. These are sample photos. The actual appearance and size may ...

Key data: 115 mm, 1540

Machine type: Turbo 14 Manufacturer: ERBA Power kW: 0.55 Total volume: 14 lt. Description: The ERBA Turbo 14 is a centrifugal system for deburring, smoothing and shining small to medium-sized workpieces in a short process time. The machine has a digital process timer, as well as a digital speed display. The platter speed can be adjusted by means of a frequency converter. The Turbo 14 is available in dry and wet versions. It can be linked to a separation section. The price quoted is net plus the currently valid statutory sales tax and plus freight costs. The pictures can show the system including accessories, which are optionally available and associated with additional costs. The price quoted refers to the basic machine. These are sample photos. The actual appearance and size may differ from the pictures. If you are interested, we look forward to hearing from you. We will ...

Planetary grinders Manufacturer Precise In a suitcase with extensive zubehoer Rule transformer Tool holder SK40 with interchangeable tightening bolt Control range: 15000 - 45000 rpm Orbital speed 70 - 120 rpm when working horizontally max.: 70 rpm Radial delivery: 0.0001 - 0.002 mm Reception: SK40 electr. Connection: 220 V, 600 W Special price

Key data: 135 mm, 1550

Machine type: Turbo 20 Manufacturer: ERBA Power kW: 1.1 Total volume: 20 lt. Description: The ERBA Turbo 20 is a centrifugal system for deburring, smoothing and shining small to medium-sized workpieces in a short process time. The machine has a digital process timer, as well as a digital speed display. The platter speed can be adjusted by means of a frequency converter. The Turbo 20 is available in dry and wet versions. It can be linked to a separation section. The price quoted is net plus the currently valid statutory sales tax and plus freight costs. The pictures can show the system including accessories, which are optionally available and associated with additional costs. The price quoted refers to the basic machine. These are sample photos. The actual appearance and size may differ from the pictures. If you are interested, we look forward to hearing from you. We will  ...

Key data: 220 mm, 1550

Machine type: Turbo 35 Manufacturer: ERBA Power kW: 1.5 Total volume: 35 lt. Description: The ERBA Turbo 35 is a centrifugal system for deburring, smoothing and shining small to medium-sized workpieces. The machine has a digital process timer, as well as a digital speed display. The platter speed can be adjusted by means of a frequency converter. The Turbo 35 is available in dry and wet versions. It can be linked to the separation section listed below. The price quoted is net plus the currently valid statutory sales tax and plus freight costs. The pictures can show the system including accessories, which are optionally available and associated with additional costs. The price quoted refers to the basic machine. These are sample photos. The actual appearance and size may differ from the pictures. If you are interested, we look forward to hearing from you. We will be happy  ...

Key data: 270 mm

Machine type: YE 200 Manufacturer: ERBA Power kW: 2 x 0.3 Total volume: 200 lt. Description: The ERBA YE 200 separation line is used to separate workpieces and grinding medium. Two motors provide the necessary movement of the screen. The YE 200 can be used as a stand-alone machine or in combination with other machines, such as the ERBA Turbo (centrifugal power system). The separation floor can be changed quickly and easily depending on the requirements. Optionally, a frequency converter can be installed, which enables the infinitely variable adjustment of the motor speed. The price quoted is net plus the currently valid statutory sales tax and plus freight costs. The pictures can show the system including accessories, which are optionally available and associated with additional costs. The price quoted refers to the basic machine. If you are interested, we look forward to ...

Grinder for flaked frozen meat

Complete Zn drum system, double row, footprint 21 x 7 m, built-up operational condition any components NEW and unused (only test run with water) 11 stations zinc bath à approx. 0.8 m³ / wet turner / 19 static rinsing, pre-- post-treatment / loading - unloading Manufacturer: Fey Galvanotechnik, Solingen / year 2020 (individual components partly 2019) The system essentially consists of: ATB S7 control system in 12x Rittal cabinets, Simatic HMI Touch Tank park: 1x stainless steel tub (double E-def), 15x PP bathtubs (triple, double and single tubs) Drain ball valves, level bar probes, temperature sensors Immersion bath warmer: 20x double E-def, 16x single E-def, 12x zinc bath, 2x zinc electrolyte attachment, 9x (3x each) thick layer, blue, yellow; Rotkappe T-QS 630/1,25-230Ws, 1250W Oil separator (degreasing): Stainless steel Friess W20 31x drum units: filling volumes up to  ...

The Schiatti FPS 20 RBS is an advanced straight grinder for glass processing, designed for finishing flat edges and bevels with high precision. Here are the key specifications and features that distinguish this machine: ⚙️Technical Specifications Glass thickness range : from 3 to 20 mm Minimum glass size : 150 × 150 mm Maximum load : 1000 kg Working height : 765 mm Total power : 8.1 kW Water tank capacity : 195 liters Air consumption : 8 Nl/min Front speed : adjustable from 0.5 to 5 m/min Total weight : 1823 kg Features Sharpening of flat edges and facets up to 45° Polishing with cerium oxide (liquid or synthetic) Automatic thickness adjustment Independent adjustment of diamond and polishing wheels Double speed motors for polishing wheels PLC control with input and display of working parameters Closed water cooling system Rubber pads on conveyor chain with  ...

Тype: Seydelmann AU 200 Completely made of special stainless steel Hole plate diameter: 200 mm Hopper content: about 400 L Throughput depending on material type, speed, cutting set up to 10000 kg/ h Speeds: 2-speed working worm and 3-speed feeding worm - independent of each other Bayonet lock of the cutting set Column lifting device Protection device at the outlet Machine dimensions in сm: Width: 255,0 Depth: 170,0 Height: 174,0 Installed power: 57 kW Voltage: 380 V, 50 Hz Machine weight: 1900 Kg

Belt grinding machine for wood & metal, roller spacing approx. 3000 mm