km 250 b used for sale

Becker rotary vane vacuum pump VTLF 2.250/0-79 with 5.5 KW DS motor, 250 m3/h, final pressure: - 800 mbar, completely overhauled with all wearing parts, 1 year warranty

Manufacturer: Grundfos Number: 2 Model: NB 100-250/245 A-F-A-BAQE Built: 2008 Rated flow current: 148 m3/h Nominal head: 18.1 m Speed: 1460 rpm Pressure: 16 bar Temperature range: 0-120°C Power: 11 kW The pumps never went into operation after installation and are therefore virtually unused. Technical specifications and data sheets are available and will be sent on request. The pumps can be purchased individually as well as in the complete package.

Key data: 250 KW, 314 kVA, 400 V

MODEL: EQ-BG312250 ENGINE: WP13D317E300NG FREQUENCY (HZ): 50 VOLTAGE(V): 400V/230V GENERATOR POWER: 312.5(kVA) / 250(kW) STARTING: ELECTRIC CONTROL SYSTEM: SELF-CONTROL FUEL TYPE: LPG; LNG; Gas COOLING: WATER-COOLED WEIGHT: 2275kg DIMENSIONS L/W/HEIGHT (MM): 311011341450 The engines are new, complete including control, diesel tank, exhaust and batteries. Network monitoring, grid feed-in Soundproofed Immediately ready for use. Control: Deep Sea Electronics (DSE) Alternator: Leroy-Somer Additional: Automatic Transfer Switch (ATS) 63A/100A ABB & Schneider Disconnectors GenCloud Connect with a phone or computer Single-phase valve 50°C-55°C Radiator External Diesel Tank Lubricating Oil Heater Water Heating Dispatch: Worldwide transport including unloading is possible for an extra charge To be able to quote an exact freight price, please send us an inquiry with yo ...

200 ml bottle form set with shampoo nut

SCHENCK hydraulic power unit type PP250A B Used hydraulic power unit. Ready to connect and ready for use. Used for servo hydraulics Incl. comprehensive and serviced components (see pictures). Aggregate rental possible. Other power units and hydraulic components available on request (sale/rental). Nominal pressure 315 bar Nominal flow rate 250 l/min Tank capacity 1.3 m³ Year of manufacture 1996 All machines can be viewed in Kassel by arrangement. We would like to point out that the machines offered are used machines and not new machines! The sale of used goods is only to tradespeople within the meaning of § 14 BGB under exclusion of any warranty and return in the actual condition. Upon purchase, you will receive an invoice with VAT (19%). Pick-up in 34123 Kassel, free loaded with forklift. You are also welcome to have the machine picked up by a forwarding agent ...

250 ton x 3000mm 3100mm ben length 3200mm between frames MASSIVE tooling package Bend aid and voice control!

With the help of our rental machines, you can bridge the time periods during which there is an increased demand for compressed air. This is useful, for example, in the event of unexpected peaks in demand or the failure of one of your own compressors. The usual high BOGE quality standards also apply to our used rental machines – in addition to various compressors, a wide range of high-performance compressed air components is available for you. Before renting, all machines are carefully reworked and tested – we give you a guarantee for this. Visit the BOGE compressors Used Machinery Shop

250 ton x 3000mm MASSIVE SPECIFICATION €100,000 EUR Tooling package!

plate thickness: 2,5 mm roll-body distance: 260 mm throat: 500 mm distance between roll centers: 92 mm tool adaptor: 35 mm speed: 3,5 m/min total power requirement: 1,5+0,55 kW weight of the machine ca.: 320 kg dimensions of the machine ca.: 1200x700x1200 mm Domestic equipments: - motor driven beading machine - 3 sets of bead rollers - Footswitch - Operating instructions in German - CE mark / Declaration of Conformity The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

grinding wheel diameter: 200 mm no. of working stations: 2 Stück turning speeds: 2800 U/min dimensions of grinding wheel: mm grinding motor: 0,55 kW shaft cross cut: 32x40 mm total power requirement: kW weight of the machine ca.: 250 kg dimensions of the machine ca.: 1 x 0,6 x 1,2 m - Swing table 420 x 220mm - on the side. Movement 40mm - infeed against grinding wheel 70mm - Degree of inclination 30 ° - Grinding guide grinding device - Inclination of the mounting bracket 20 ° - Adjustment of the mounting bracket 45 ° - Infeed against grinding wheel 80mm - Height adjustment 90mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

press capacity: 250 t spindle diameter: 160 mm ram stroke range: 180 mm stroke speed: 71 Hub/min column daylight: 450 mm table surface area: 560x450 mm ram surface: 450x400 mm total power requirement: 12 kW weight of the machine ca.: 9 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

We offer you here a used box shelf for sale. The shelf is ideal for lighter boxes, but cardboard boxes can also be easily picked up. The box shelf can be individually adjusted to your own needs. Both the angle of inclination of the roll strips and the distance between planes can be quickly and easily adjusted with an Allen. The levels are provided with guide rails on both sides and a stop on one side, so that the boxes/cardboard boxes are secured against accidental falling. Technical data and further information: Manufacturer: Beewatec Designation: Cardboardrack 1 lanes 19032-01 Year of construction: approx. 2015 Notes: As can be seen in the pictures, the shelf is delivered in a pre-assembled state. Included in delivery are: 01x Box shelf, used Total length: approx. 2,500 mm Total depth: approx. 610 mm Total height: approx. 1,915 mm Internal depth: approx.  ...

Pressure booster system, dry rotor pump heating pump centrifugal pump, water pump, inline pump used 2 pumps Manufacturer: Grundfos Type TP 150-250/4 A-F-A-BQQE Q 2x 295 m³/h at 20.4 m 16 bar 120°C 22 kW with pump control 96754726 Dimensions approx. 2500 x 1300 x 1600 mm All articles are checked for function before delivery, if technically possible! Changes and errors in the technical data, information and prices as well as prior sale reserved.

Main features : Manufacturer - Spain; The machine is made of 18/8 stainless steel with an anodized aluminum casing; Hardened and chrome-plated cutting disc made in Germany; Automatic sharpening device; Motor cooling fan; Guard for the cutting disc; Cutting thickness: 0÷16mm.; Maximum dimensions of the product for cutting – 270×140mm.; Maximum thickness of the product for cutting – Ø170mm.; Diameter of the cutting disc – Ø250mm.; Power: 0.33 hp; Dimensions: 590/700/425mm.; Weight: 28 kg.;

Machine Details Stock number 1105-03758 Machine type CNC lathe - inclined bed machine Brand MORI SEIKI Model SL 250 BMC Year of construction 1999 Control type CNC Control FANUC MSC 503 Storage location FRANCE Country of origin Japan Delivery time immediately Freight base EXW (Incoterms 2000) free Technical details Turning diameter 356 mm Turning length 500 mm Control FANUC MSC 503 Turning diameter over bed 520 mm Turning diameter above the paddling carriage 275 mm Center width 525 mm Travel - x 260 mm Travel - z 550 mm Spindle speeds 42 - 4000 rpm Spindle bore 85 mm Turret head (x-fold) 12-fold Shank cross-section 25 Shank diameter 50 mm Rapid traverse longitudinal 15000 mm/min Rapid traverse plan 12000 m/min tailstock stroke 491 mm Motor power 15 / 11 kW Total power requirement 30 kW Machine weight ca. 5.5 t Information VERY well maintained machine wit ...

Sell Vacuum pump used Type: Busch 250-138, Vacuum: 20 mbar, Motor Oil: Type SAE30, Engine: Delfin, Year of manuf.: 2012, Power 3,45 kW, 230 volts, 15 A,

Bench scale, running weight scale, 250 to 6000 g

SPECIFICATIONS: Machining length: max. 2500 mm Machining width: max. 350-900 mm COMPOSITION: Station I: Milling machine right-left (2 x 11 Kw) Station II: Milling machine right-left (2 x 5.5 kW) Station III: Grinding unit right-left (2 x 3.7 kW) Station IV Grinding unit right-left (2 x 3.7 Kw) EQUIPMENT: 8 pushers for machining 1 hydraulic pump 1 control box 1 control panel 1 protective grille

Three-jaw chucks, three-jaw lathe chucks, power chucks -Chuck size: Ø 250 mm -Short taper mount for: bayonet mount, taper size 8 -Weight: 41 kg

turret of a Boehringer lathe The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

1 CALATOR inspection machine for open width knitted fabrics type BSM 2500, roller width 270 cm, working width 250 cm, entry small roll, exit small roll, with LABELTEX 86 type LBTX defect registration unit, with illuminated table

Power distribution box, construction site power distribution box, connection cabinet -Assembly -NFI circuit breaker -Main fuse -1x 63 A socket -Supply cable, plug 63 A -Dimensions: 520/520/H800 mm -Weight: 20 kg

Power distribution box, construction site power distribution box, connection cabinet -Assembly -NFI circuit breaker -Main fuse -1x socket: 63 A -Dimensions: 550/550/H850 mm -Weight: 19.5 kg

Forklift battery charger, industrial charger, forklift battery charger, industrial charger -Voltage: 24 volts -Power: 25 A -Connection: 230 volts -Weight: 30 kg

Manometer, test manometer, pressure gauge with Bourdon tube, pressure and temperature measurement technology -Manufacturer: Wika, pressure gauge -Type: 0 to 250 bar -Screw connection: see photos -Number: 2x manometer available -Price per piece -Dimension: 100/85/H100 mm -Weight: 0.9 kg/pcs

sheet width: 2500 mm plate thickness: 3,0 mm distance between columns: 2620 mm true cutting angle adjustable: - back stop - adjustable: 850 mm cutting gap adjustment: - mm total power requirement: kW weight of the machine ca.: 2,8 t dimensions: 3,2 x 1,8 x 1,7 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Spray machine -Closing force: 25 tons -Screw diameter: 22 mm -Unilog 2040 control unit -Slat spacing: 250x250 mm -Data collection terminal -Parts removal device, manufacturer ASS -Temperature control unit, manufacturer Single

Absolute encoder, encoder, rotary encoder, encoder, incremental encoder -Manufacturer: Balluff, Incremental Encoder -Type: BDG 6360-2-10-30-W126-2500-65 -Quantity: 2 encoders available -Price: per piece -Dimensions: 58/86/H70 mm -Weight: 0.3kg

Contactor, semiconductor contactor, contactor, power contactor, capacitor contactor -Manufacturer: BHC WEB, capacitor 1000 µF -Type: 55/085/56 LL ALS20A 102 KD 250 -Quantity: 1x contactor available -Dimension: 95/70/H110 mm -Weight: 0.3 kg

Pipe gripper, round gripper, laying tongs, round material gripper, scissor gripper, pipe laying device -Manufacturer: Siegert, round material gripper round pliers type RZ -Gripping range: 50 to 250 mm -Load capacity: 250kg -Dimension: 630/250/H450 mm -Town weight: 11 kg

Tires, solid rubber tires, forklift tires, complete wheels -Manufacturer: Bergougnan, solid rubber tires 2 pieces -Tire size: 250-15 RIM 7.00F-15 -Bolt circle: Ø 225 x 28 mm -Recess: Ø 175 mm -Price/Delivery: complete -Dimensions each: Ø 700 x 215 mm -Weight: 90 kg/piece

• This workstation was configured for a cleanroom class D and max. for OEB3 substances (medium toxic material) • Via the laminator in the bonnet area, H 14 filtered clean air in ISO 5 quality in accordance with EN 14644-1 with unidirectional flow and a flow velocity of 0.17 m/s to 1.00 m/s - depending on the product and task - is channelled into the interior of the barrier above the product, creating a cleanroom zone. • The visible surfaces are made of stainless steel 1.4301 and are brushed (RA

Hydraulic Pump Manufacturer : Rexroth / Brueninghaus Article: L A6VM 250 HD3 / 63W -VZB - B - SO154 Condition : New

Bebro Electronic DC CAN alpha 2500145X Motor Controller for Jagenberg Diana Pro. Used, tested.

Power distribution box, construction site power distribution box, connection cabinet -Assembly -NFI circuit breaker -Main fuse -1x socket: 63 A -Dimensions: 550/550/H850 mm -Weight: 20 kg

Drive: . kW Capacity: . kg/h material: . 6 pieces Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us: More than 400 of our own machines in the warehouse More than 12,000 m² of storage space, crane capacity 70t. More than 1000 items Accessories for your workshopYou want to sell machines, production lines or your company,then contact us. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Pressure: 40 bar Motor: 11 kW Free air delivery: 0,78 m³/min Measurement (WxHxD): 6300 x 1500 x 806 Weight: 490 kg Compressed air connection: 1/2

Pressure: 40 bar Motor: 11 kW Free air delivery: 2,42 m³/min Measurement (WxHxD): 1652 x 1456 x 928 Weight: 662 kg Compressed air connection: 1/2

ID3475 Binder ES/DD 2500x5 year/Baujahr 2019 Coarse sieve, double decker (45/65 perforation), housing has cracks, incl. motor and supports Coarse strainer, double-decker (45/65 perforations), housing has cracks, incl. motor and supports

cutting width:2500 mm Numbers of torche:2 Type of gas:Sauerstoff, Propan total power requirement:2 kW length:6000 mm control:KS 20 A Messer Griesheim Documents:vorhanden

table width:2300 mm table length:7000 mm burner heads:1 Plasma -Schneidk. burner heads:2 autogene Schneidköpfe control:NBS 400 Documents:vorhanden

material width:250 mm material thickness:0,2 - 2,0 mm no. of straightening rolls:7 straightening roll diameter:60 mm run-in height:1250 mm power capacity:4,0 kW weight:0,65 t Dimensions (WxDxH):1,05 x 1,25 x 1,5 m

2x Water Pumps NEW 22kW 230m³/h H: 22.5m n: 1450 min LENZE electric motor type MDERAXX180-32J 22kw 1470min

Key data: 250 °C, 8 kW

This temperature controller can heat up to 250 degrees with oil medium. It can also be used for injection molding tools, extruder screws, and metal processing machines. Everything works perfectly. Pump, heating, heat exchanger and control are good. I have 1 of these, but there are also other types of temperature controllers for lower temperatures and other machines in the plastics industry. Please see my other ads.

Manufacturer: Becker, Type: SV.5,250/1, revolutions rpm: 2800, Final sealing pressure mbar: 190/200, Drive power kW: ca.3,

BACCI FC 8 2500 linear milling machine Working length 2500mm Working width 200mm Working height 180mm Number of units 8 Milling 7.5kw Milling 7.5kw Milling 5.5kw Milling 5.5kw Grinding/milling 4.5/3.3kw Grinding/milling 4.5/3.3kw Sanding 3kw Sanding 3kw Hydraulic feed Working speed 0-15m/min Return speed 50-100m/min Year of production 2004 CE Certified Machine weight 5100kg

CNC Machining Center Weeke Homag Optimat BHC 250 Masch. No. 0-250-08-1834 Year of manufacture 2004 Kleies machining center in good mechanical condition. Ideal for kitchen and cabinet production. No collisions. No repairs in the last 15 years. Rock solid machine that never caused any problems. Dimensions set-up: approx. 5.4 x 3.5 m Light barrier as safety No unevenness due to step mats Electric cabinet with fan Milling spindle air-cooled. Incl. 2 slide end mills. Z maximum 55mm Various drill bits: 3 mm, 5 mm, 8 mm, 15 mm, 35 mm. Grooving saw in X. Changer 5 places. Processing dimensions: approx. 2.19 x 0.92 m 100 m3 vacuum pump Inspection possible, but the machine is no longer connected. The computer "PC" must be replaced, as it no longer starts. Replacement costs estimated at approx. EUR 6,000.00. Otherwise, the machine is in very good condition. If yo ...

Description 2 fixed flow pumps.