kl used for sale

- Manufacturer Cefa - type. KLEENSPRAY - Year of construction 2004 - Operating side left - Working width 1.200 mm - Working height 900 mm + - 20 mm - Gun drive single version - Dry extraction - Extraction nozzle diameter 490 x 350 mm - Exhaust air capacity 6,500 m³/h - Paper belt transport system - Infinitely variable feed speed 1.5 - 7 m/min - PLC control with touch screen - Number of spray guns installed 0 pcs. - Height -adjustable spray guns - Number of paint pumps 0 pcs. - Suitable for solvent -based paints - Suitable for water -based paints - Length 4,450 mm - Width 3,360 mm + 1000 mm - Height 2,600 mm - Total connection ~ 7.1 kW / 28.6 A - Volt, Hz 400 / 50 - Location, in stock - Voltage fluctuations max. +/ - 5 ___________________________________ Optionally, we can also provide you with a quotation for the assembly and start -up of the system, as well a ...

Mobile jaw crushing plant Kleemann Mobicat MC 110 Z Year of manufacture 2007 Operating hours approx. 8600 UVV up to 23 Crushing performance depending on material Approx. 330 t/h Accessories: Magnetic separator Feed size max. 1,050 x 650 mm Crusher inlet 1,100 x 700 mm Transport width 3,000 mm Transport length 14,900 mm Transport height 3,600 mm Transport weight 39,500 kg Price from location near Magdeburg

- Manufacturer: Cefa - Type: KLEENSPRAY - Year of manufacture: 2005 - Working width: 1,200 mm - Working height: 900 mm + - 20 mm - Operating side: right - Price for reconditioned machine - Gun drive: Duo version - Height -adjustable sprayers - Dry extraction - Extraction nozzle diameter 490 x 350 mm - Exhaust air capacity ~ 6,500 m³/h - Paper belt transport system - Feed speed continuously adjustable 1.5 - 7 m/min - PLC control with touch screen - Number of sprayers installed 0 - Number of paint pumps 0 - Suitable for solvent -based paints - Suitable for water -based paints - Length 4.300 mm - Width 3.360 mm + 1.850 mm - Height 2.700 mm - Total connection ~ 7.1 kW / 28.6 A - Volts, Hz 400 / 50 - Location, in stock - Voltage fluctuations max. +/ - 5% _____________________________________ Optionally, we can also provide you with a quote for assembly and commiss ...

Tank 120lt., P max 250bar, 15lt/min, 7,5kw, pressure gauge up to 400bar, PD 315bar, Pmax 350bar, with hydraulic accumulator Hydrac P-300bar-10lt., throttle check valve; engine BBC 7,5kw, 380V, electric control, oil level indicator,

Roll Splitter Guillotine RGS50 Used machine in good condition, partially overhauled immediately ready for use Year of Make: 2014 Drive power: 15kW Cutting force 2x25to Knife length: 2500mm Max aperture. 1600mm incl. base frame and feed table Work/feed height 1200mm Two-handed operation PLC supported

max. wheel diameter:5 - 260 mm gear width:400 mm max. module:15 min. module:0,5 gear hobbing diameter - internal:30 mm max. helix angle:> 85 ° Aussenverz. max. helix angle:> 45° Innenverz. Testing Range vertical:400 mm dist. between centers:5 - 600 mm table diameter:260 mm max. table load:100 kg speeds:30 1/min total power requirement:1,6 kVA weight of the machine ca.:900 kg dimensions of the machine ca.:200 x 1300 x 2150 mm CNC Gear Tester in good condition, out of OEM Test Lab. For measuring of spur and helical toothing, additional of rotationally symetric parts as true running, coaxiality, axial runout, etc. with tool changer ( 4 nos.)

Roll splitter RGS25 New device, immediately available and ready for use for shredding paper and film rolls. Drive power: 7.5kW Cutting force: 25to Knife length: 1500mm Max. opening: 800 -PLC Siemens S7 -Emergency stop ripcord on both sides -Safety interlock

x-travel:800 mm y-travel:300 mm z-travel:400 mm total power requirement:ca. 4,0 kW weight of the machine ca.:ca. 1,7 t dimensions of the machine ca.:ca. 2,10 × 1,90 × 2,00 m The Klopp FWUE 8 is a conventional universal tool milling machine designed for precise milling, drilling and threading operations in toolmaking, mechanical engineering, maintenance, and single-part and small-batch production. Thanks to its horizontal and vertical milling capabilities, the machine offers versatile machining options for a wide variety of workpieces. The robust cast iron construction ensures high rigidity and machining accuracy, even during demanding milling operations. The machine is fitted with a 3-axis digital readout (DRO) and features automatic feeds along the X, Y and Z axes, selectable feed rates and a rapid traverse function. This enables convenient operation and precise positioning of the axe ...

vertical machining center, year 2001, CNC 21i-M. Used machine in good condition. More info & price on IndustrialBuyer.

Pneumatic riener for ship rivets Comes with the following accessories, 1 x impact bolt for round head 16 mm 1 x impact bolt for round head 22 mm

KlicK board plasterboard production machine was built in 2020 in Poland. The system has been specially designed for the production of innovative gypsum boards, which are used in residential and commercial construction. It features a number of state-of-the-art components with the best technical parameters, which significantly facilitate and accelerate the entire production cycle. The KlicK board plasterboard is distinguished by a unique snap-in section in the form of a click profile. This enables the board to be quickly and easily assembled at right angles, resulting in a stable outside corner. Simply fold the board along the profile and it clicks into the desired shape. During transport, the profile is secured by a transport strip, which is removed when the drywall is delivered to the assembly site. All this makes KlicK board an enormous saving in labour time. The entire production ...

Klebebindegerät / Fanbinder Schmedt  PräColl HHS 11RR Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Magnetic coupling VEM Dessau KLDO 0.63 ( KLDO0.63 ) TGL 9922 Ø 12 mm New ! 1 groove

Magnetic coupling VEM Dessau KLDO 0.63 ( KLDO0.63 ) TGL 9922 New ! Ø 15 mm 1 groove

Magnetic coupling VEM Dessau KLDX TGL 9922 Ø 60 mm 2 grooves New ! Dimensions: 270 x 230 x 80 mm

Magnetic coupling VEM Dessau KLDO 0.63 ( KLDO0.63 ) TGL 9922 New ! Ø 13 mm 4 grooves

Magnetic coupling VEM Dessau KLDX 10 ( KLDX10 ) TGL 9922 ( TGL9922 ) shaft diameter: Ø 42,000 2 / 36 mm, spline shaft profile, 4 grooves Shaft length: 58 mm Groove width: 12 mm Diameter coupling body: Ø 158 mm Number of clutch discs: 4 New !' Dimensions: 195 x 158 x 72 mm

Magnetic coupling VEM Dessau KLDX 0.63 ( KLDX0.63 ) TGL 9922 gebraucht, geprüft ! Ø 15 mm 1 Nut

Magnetic coupling VEM Dessau KLDX 2.5 ( KLDX2.5 ) TGL 9922 New ! Ø 25 mm 1 groove

Magnetic coupling VEM Dessau KLDO 1.25 ( KLDO1.25 ) New ! Ø 18 mm 4 grooves

No remote control available. Auction-ID: A1-41279-517

On 4x pallet Auction-ID: A1-48959-722

Magnetic coupling VEM Dessau KLDO 20 ( KLDO20 ) TGL 22050 ( TGL22050 ) Ø 50 mm 1 groove, width 14 mm 6 clutch discs New ! Dimensions: 194 x 158 x 70 mm

Magnetic coupling VEM Dessau KLDO 20 ( KLDO20 ) New ! Ø 46 mm 6 grooves

Magnetic coupling VEM Dessau KLDO 20 ( KLDO20 ) Ø 40 mm 1 groove 24 V New ! Dimensions: 200 x 160 x 75 mm

\" Device Description: The device is used to determine the number of objects based on images captured by cameras. The objects counted can be 1–10 ml glass ampoules or 2R–10R glass vials.   EC Declaration of Conformity: Valid as of 2020 The device complies with all relevant provisions of the following Directives of the European Parliament and of the Council: Directive 2006/42/EC on machinery (Government Regulation No. 176/2008 Coll.) Directive 2014/30/EU on the harmonization of the laws of the Member States relating to electromagnetic compatibility (Government Regulation No. 117/2016 Coll.)   Electrical Equipment Inspection: Valid as of 2020 The electrical equipment is operational from an electrical safety standpoint   Parts List: A list of all parts comprising the equipment is included in the appendix (Počítačka_parts list). The most si ...

Magnetic coupling VEM Dessau KLDO5 TGL 9922 ( TGL9922 ) Shaft diameter: Ø 25 mm Wavelength: 50 mm 1 groove, Width: 8 mm Number of clutch discs: 4 Control voltage: 24 V DC New !' Dimensions: 148 x 112 x 50 mm

Magnetic coupling VEM Dessau KLDX 1.25 ( KLDX1.25 ) New ! Ø 20 mm 1 groove

Magnetic coupling VEM Dessau KLDX 0,32 New ! Ø 12 mm 1 groove

Magnetic coupling VEM Dessau KLDX 40 ( KLDX40 ) New ! Ø 50 mm 2 grooves

Magnetic coupling VEM Dessau KLDX 5 ( KLDX5 ) New ! Ø 30 mm 1 groove Dimensions: 175 x 134 x 50 mm

Magnetic coupling VEM Dessau KLDX 20 ( KLDX20 ) TGL 22050 Ø 50 mm 2 grooves 5 Clutch discs 24 V DC New ! Dimensions: 240 x 198 x 69 mm

Magnetic coupling VEM Dessau KLDX 5 ( KLDX5 ) Ø 25 mm 1 groove New ! Dimensions: Ø 132 x 50 mm

Magnetic coupling VEM Dessau KLDX 10 ( KLDX10 ) TGL 22050 ( TGL22050 ) Ø 40 mm 24 V DC 1 Nut 4 Clutch discs Outer diameter: Ø 158 mm New !' Dimensions: 193 x 158 x 58 mm

Magnetic coupling VEM Dessau KLDO 20 ( KLDO20 ) TGL 9922 New ! Ø 50 mm 2 grooves

Magnetic coupling VEM Dessau KLDX 10 ( KLDX10 ) TGL 9922/65 ( TGL9922/65 ) Ø 30 mm 1 groove 4 Coupling discs Outer diameter: Ø 158 mm Flange inner diameter: Ø 124 mm New !' Dimensions: 193 x 158 x 58 mm

Magnetic coupling VEM Dessau KLDX 20 ( KLDX20 ) TGL 9922 New ! Ø 46 mm 6 grooves Dimensions: 200 x 240 x 70 mm

Motor Drive, Actuator, Valve Actuator ZPA DUKLA PRESOV KLIMACT KPI 52342.0320/TV 220 V AC Holding torque: 12.5 Nm Runtime for 90° rotation angle: 60 s Rotation angle adjustable ! New !' Dimensions: 240 x 190 x 160 mm

Motor Drive, Actuator, Valve Actuator ZPA DUKLA PRESOV KLIMACT KPO 52230.0111/1 220 V AC Holding torque: 16 Nm Runtime for 90° rotation angle: 125 s Rotation angle adjustable ! New !' Dimensions: 190 x 140 x 140 mm

General Description TRUMPF laser cutting head assembly (Schneideinheit) for CO₂ laser cutting systems. The unit is designed as a replacement cutting head for TRUMPF TruMatic/TruLaser machines equipped with TruFlow laser resonators. The assembly includes the autofocus unit, height sensing system, gas connections and electrical interfaces. Technical Details Manufacturer: TRUMPF Component: Laser cutting head (Schneideinheit) Material No.: 2014986 Serial No.: Partially visible Compatible with TRUMPF CO₂ laser systems Integrated autofocus drive Height sensing unit Pneumatic and electrical connections Condition: Used Condition Complete assembly supplied in the original protective packaging. Connectors and housing appear intact with minimal cosmetic wear. Lens condition, focus cartridge, cooling circuit and operational status have not been tested. Delivery Available im ...

Diesel, capacity 480 lt, never used Overall dimensions: 1000 x 800 x 700 mm Weight: 40 kg Auction-ID: A7-49495-407

Diesel, capacity 220 lt, never used Overall dimensions: 900 x 700 x 700 mm Weight: 30 kg Auction-ID: A7-49514-183

Diesel, capacity 220 lt Overall dimensions: 900 x 700 x 700 mm Weight: 30 kg Auction-ID: A7-49495-323

Diesel, capacity 220 lt Overall dimensions: 900 x 700 x 700 mm Weight: 30 kg Auction-ID: A7-49514-11

Diesel, capacity 220 lt, never used Overall dimensions: 900 x 700 x 700 mm Weight: 30 kg Auction-ID: A7-49514-78

Diesel, capacity 480 lt, never used Overall dimensions: 1000 x 800 x 700 mm Weight: 40 kg Auction-ID: A7-49514-158

Diesel, capacity 220 lt, never used Overall dimensions: 900 x 700 x 700 mm Weight: 30 kg Auction-ID: A7-49514-261

Diesel, capacity 220 lt Overall dimensions: 900 x 700 x 700 mm Weight: 30 kg Auction-ID: A7-49495-255

Diesel, capacity 480 lt, never used Overall dimensions: 1000 x 800 x 700 mm Weight: 40 kg Auction-ID: A7-49514-49