kimer 28 96 used for sale

Two identical Göztepe belt fryers are available for vegetables (onions, potatoes, nuts, etc.). Working length: 6800mm, working width: 700mm, inlet height: 1280mm, outlet height: 1060mm, working temperature: 180°C, plastic belt length and width bottom: 14000mm/720mm, plastic belt length and width top: 8500mm/720mm. Machine dimensions X/Y/Z: approx. 6900mm/1800mm/3500mm, total output: 135kW. Documentation available. On-site inspection is possible.

Tool case, tool box, plastic tool box, tool trolley -Manufacturer: Stanley, plastic tool box tool trolley type 1-93-968 -3 compartments: see photos -lockable: without lock -Dimensions: 470/310/H620 mm -Weight: 4.5 kg

pressure capacity max.: 80 t Stroke: 500 mm table surface area: 960 x 810 mm spindle pitch: 72 daylight between the columns: 950 / 540 mm passage: 640 mm machine weight ab.: 4500 kg dimensions of the machine ca.: 2,0 x 2,0 x 3,85 m Hydraulic quick adjustment 500mm Flywheel Ø2000mm 4 prism bases for straightening waves different support frames The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Kannegiesser roller conveyor Vectura RB 800-960-890, not driven RA1301 Technical data: Conveying length (NL): 800 mm Frame width (NB): ca 960 mm Roll width (RL): 890 mm Height/band run (BH): 900 mm +/- 100 mm height adjustment Number of support feet: 2 pieces Drive: without Roller: Ø = 30 mm, grey, plastic (two steel) roller distance (pcs.): 35 mm Pitch: 2° degrees Year of construction: 09/2018 Special feature / accessories: 1x emergency stop switch 1x main switch 2x light barrier 1x end plate 50mm high All prices net plus VAT from central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg Features: Construction year: 2018 condition: good (used) Conveying length in mm: 800 Nominal / outside width in mm: 960 Roll width in mm: 890 Roll division in mm: 35 Driven: NO scope of delivery: including supports For individual, professional advice, simply contact us. Simply contact us by phon ...

Set of 4 Gravimetric Feeders: - Brand: Maguire - Model: WSB-960T. - Made of 6 materials each - Year: 2006 - With electrical panel

Inv. Num. : 8662 Type: Rondamat 960 Producer: Weinig Generated: 2000 Parameters: Max. Speed: 1500-3000 1/min Grinding wheel diameter: 150/225 mm Grinding wheel drilling: 60 mm

Manufacturer: Cleco / Apex Tool Group Type: TSE 961446PT Voltage: 380 V DC Current: 2-10 A DC Operating temperature: -20 to +70 °C Humidity: 0-90% without condensation You can also find the corresponding screw control in our shop!

Offered is a rubber injection moulding machine of the company Klöckner DESMA, stroke volume 1600cm³, clamping force 2500kN, injection pressure 2078bar, machine weight approx. 11000kg. A visit on site is possible by arrangement.

The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Offered is a material tensile testing machine year 1984. Shear force tensile tests on reinforcing steel, max. tensile force 200kN, clamping device, external control unit. Viewing possible by appointment.

Woodward 9905-969 Input Module 6 Channel Mint

A pallet wrapper with shrink hood OK-Pack is available. Pallet dimensions X/Y/Z: 1200mm/800mm/2000mm, max. pallet weight: 1500kg, machine dimensions X/Y/Z: approx. 2700mm/1800mm/2600mm, control system: Siemens PLC S7-1200/214C-KP300. Documentation available. An on-site inspection is possible.

This 3-axis Hyundai Wia F 960M vertical machining center was manufactured in 2014. It features a large table size of 2700 x 950mm, capable of handling loads up to 4500kg. Equipped with a 22 kW spindle power and a maximum speed of 8000 RPM, it includes a 30-position tool magazine. If you are looking to get high-quality milling capabilities, consider the Hyundai Wia F 960M machine we have for sale. Contact us for more information.

This Kloeckner Desma 968.250 ZO was manufactured in 2010. A hydraulic injection moulding machine, it represents a reliable option for precision moulding tasks. Consider the opportunity to buy this Kloeckner Desma 968.250 ZO hydraulic injection moulding machine. Contact us for more information.

A complete bottle filling and capping line is available. Ring bowl diameter: 960mm, filling valve count: 24, capping stations (KK): 6, capping stations (SV): 6, capper diameter: 240mm, filler and capper pitch: 125mm, filling capacity (0.5l): 6000bottles/h, bottle volume: 330ml/500ml, operating hours: approx. 7200h. An on site inspection is possible.

General SKU298W568 LocationBarneveld Pressure Working pressure2 Bar Vacuum possiblecheck Working pressure jacket2.5 Bar Main Features MaterialStainless steel Volume960 Ltr. Surface8 m2 Specified Features - Tray dryer Tray dryercheck Stainless steel housingcheck Stainless steel trayscheck Heating surface8 m2 Drying chamber capacity960 l Drying chamber sizes1000 x 1000 x1000 mm Max. temperature120°C With jacketcheck Max. temperature120°C Number of trays8 Tray sizes1000x1000x20 mm Distance between the trays90 mm With 1 doorcheck Connection for the vacuum pumpcheck Without vacuum pumpcheck MaterialStainless steel 1.4301 (304) Information MakeAlb. Klein Machine number510173 Year of construction1990 Floorspace1,40 x 1,70 m Total height2,0 m Weight1650 kg Extra SpecificationsWith 3 trolley’s with trays, dim. Tray 420x880 mm : Technical specs Extra info ...

Cutting height: 195 mm saw-blade dia.: 550 mm Motor output: 5,5 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

DOOSAN VM 960L CNC machining center was built in 2016 in South Korea by Doosan Machine Tools. The machine on offer is an excellent choice for both roughing and finishing machining of workpieces with a maximum weight of 4500 kg. It is distinguished by a number of state-of-the-art technical solutions, which, combined with extensive equipment, guarantee excellent repeatability of the manufactured parts over many years of intensive operation. All machining processes, i.e. drilling, threading and milling, are performed by means of a reliable spindle and cutting tools taken from a 40-position magazine. The very accurately balanced spindle ensures vibration-free operation at all speeds. Its taper is cleaned continuously with compressed air to protect it from chips and coolant. The entire workspace, in turn, has been fully maximised to ensure freedom of operation. The offer also includes a ...

A laminar flow unit Bleymehl for aseptic product protection is available. Total air volume flow: 1200m³/h, electrical power: 0.4kW, machine weight: approx. 90kg. Including one replacement curtain. The machine was manufactured in 2005, however only commissioned in 2018. Documentation available. An on-site inspection is possible.

Refrigeration compressor, refrigeration machine, refrigeration compressor, refrigeration unit, refrigeration compressor, compressor, filter dryer housing -Manufacturer: Alco, filter drier housing unused in original packaging -Type: ADKS-PLUS 969-T/PCN 883556 -Max. Operating pressure: 34.5 bar -Connection: 1-1/8 -Dimension package: 480/210/H160 mm -Weight: 5.1 kg

Centrifugal fan, dust extractor fan, fan, extractor, dust fan -The fan comes: from a chip filter system -Motor: Siemens type 1L4 207-6AA60-Z 200L -Motor power: 22 kW -Speed: 975 rpm -without: housing -Impeller outer diameter: 960 mm -wing height: mm -Dimensions: 1425/1115/H1390 mm -Weight: 412 kg

Rubber protective mats, conveyor belt, belt conveyor, conveyor belt rubber, rubber conveyor belt, conveyor belt, conveyor belt -Conveyor belt: conveyor belt conveyor belt -Width: 175 mm -Length: 9600 mm -Thickness: mm -Number: 2x conveyor belt available -Price per piece -Transport dimension: Ø 125 x 175 mm -Weight: 1.8 kg/pc.

container turning device, boiler turning device, welding turning device, welding turning device, welding device, welding turntable, welding turning device -Container turning device: welding turning device -Load capacity: 5000 kg -Drive motor: SEW Eurodrive 0.37 kW -Unrolling speed: 100 to 600 mm/min right/left rotation -Roller spacing: 270 - 960 mm, rollers Ø 230 x 159 mm -Transport dimensions: 1200/740/H745 mm / 870/430/H745 mm -Weight: 378 kg / 275 kg

Converter, power supply, switching power supply, DIN rail power supply, servo module, AC/DC power supply, DC power supply, power supply module -Manufacturer: Mean Well, DIN rail switching power supply -Type: SDR-960-48 -Input: 200-240 VAC 6.0 A 50/60 Hz -Output: 48 V / 20 A -Quantity: 1x power supply unit included -Dimensions: 165/110/H130 mm -Weight: 2.3 kg

The machine has been dismantled and has been in our warehouse since 2015, it is used and was in use in a turkey slaughterhouse with underbeam, conveyor belt and articulated rupee.

Hydraulic power pack, hydraulic pump, hydraulic pump, universal power pack -Hydraulic unit: from Heycop 3UN/2000 automatic lathe -Motor: Siemens 1.5 kW/2855 rpm -Hydraulic tank: with level indicator -Pressure display: up to 60 bar -Dimensions: 300/500/H650 mm -Weight: 130 kg

Three-phase motor, electric motor -Power: 1.85 kW -Speed: 2845 rpm -Shaft: Ø 24 mm -Construction: B3 -Protection class: IP 54 -Dimensions: 300/240/H205 mm -Weight: 20 kg

Tool steel, round material, shaft sectionShaft, steel block, shaft sawnCold work tool steel 1.2842Material section 400 mm x length 165 mmNet weight: approx. 160 kgMaterial number: 1.2842Material abbreviation: 90MnCrV8Cold-work tool steel with high hardness acceptance and good dimensional stability during hardeningApplication in toolmaking for cutting, punching and embossing tools.Rollers and profile rollers, measuring tools, guide rails, paper cutting knives. Delivery condition: Annealed to max. 229 HBug strength in delivery condition: 770

285 cm working width, suitable for Doosan, Daewoo wheel loaders

AT- Cylinder heads complete with valves in exchange for DB OM 401-444LA,MAN D2866-2V,D2566MF-2V,DEUTZ FL912,FL913,BFL913 info@miw-zeven.de

Consecutive wrongly ordered / project change! 2 piece Complete agitator with lantern, 2-piece agitator shaft, mechanical seal, gear motor, 2 stirring organs, quench entry, quench outlet, but without Thermosiphon. Installation and operating instructions. Price/piece

Outdated MAN E2876LE302 bio gas engine in Exchange.

Cylinder head Exchange

Cylinder head Exchange

Injection pump in Exchange

Cylinder head Exchange

FOR SALE... STORK WARTSILA 16SW 280 CRANK SHAFT TO WHOM IT MAY CONCERN; WE VE CRANK SHAFT OF STORK WARTSILA 16SW 280 AT OUR STOCK STANDARD MEASUREMENT WITH REPORT. WITH GEAR & COUNTERWEIGHTS. PLS FIND CRANK STAMP DETAILS ON BELOW. 1111SW 131 F013215 LLOYD S STU. 300240 6.93 STU. 9601908 YOB 1993 CRANKSHAFT READY TO TRANSPORT. IF YOU HAVE ANY FURTHER QUESTIONS PLS DO NOT HESITATE TO CONTACT WITH US. Capt. Ayhan Ugurluba With Kind Regards ; Aliaga Marine Services E mail: info/ aliagamarine.com Phn/Fax:+90 232 618 03 90 Mobile: +905556084850 aliagamarine.com TURKEY

; operational

various knife head fraesers / plan fraesers 280 mm

Key data: 840 , 900

FOR SALE... MAK 6M 282 COMPLETE ENGINE TO WHOM IT MAY CONCERN; WE VE MAK 6M 282 COMPLETE ENGINE AT OUR STOCK. PLS FIND ON BELOW ENGINE DTLS MAK 6M 282 SERIAL NO. 28948 YOB 1982 840 kW REVOLUTION 900 ENGINE READY TO TRANSPORT. EX STOCK-IZMIR / TURKEY PS WE VE SO MANY USED MAJOR PARTS OF THIS TYPE ENGINE AT OUR STOCK. CYLINDER HEADS / PISTONS / CON RODS / LINER / FUEL INJECTION PUMPS / TURBO CHARGER / CAM SHAFTS... ETC EX STOCK READY TO TRANSPORT IF YOU HAVE ANY FURTHER QUESTIONS PLS DO NOT HESITATE TO CONTACT WITH US. Capt. Ayhan Ugurluba BEST regards; Aliaga marine services E mail: info/aliagamarine.com PHN/fax: +90 232 618 03 90 Mobile: + 905556084850 aliagamarine.com TURKEY

machine in stock!

Newman Model S-282-18" Double-Sided Helical Head Planer Listing Type: Machine for Sale Category: Planers-Double Manufacturer: Newman Model: S-282-18" Double-Sided Planer Year: 1994 Electrical Specs: 3PH Price: $22,500.00 negotiable Type: Used Condition:Very Good Location: Lockport, New York 14094 USA Phone: 716 433 4224 Description: - Material Capacity: 18" Wide x 6" Thick - Shortest Stock (not butted) 48" - Top Head: 40 HP 3,600 RPM Direct Drive - Bottom Head: 25 HP 3,600 RPM Direct Drive - 15 HP Hydraulic Power Unit for Top Infeed & Outfeed rolls - Infinitely Variable Speed Feed Control from 40 - 150 FPM - Newman Six-Row "Quiet Cut" Helical Carbide Cutter heads - Feed Works Consist of Two Pivot Mounted Top Feed Rolls - Top head Chip breaker with 3" - Sections and Independent Yield of 1-1/2" - Air Operated Pressure Bar - Top Head Power Hoist - Automatic C ...

Band width - 280 mm Thickness 3 mm Setting rollers suit 5-reel 2, all diameter 60 mm Control actuator, band storage adjustable from 0, 5 s â 15 s video available Dimensions 80 x 60 x 140 cm more info on request

Ladies and gentlemen, hereby we offer a gas engine, type 2842E312 for sale on! The engine has 29.300 hours and is working properly.

description: Type: MAN 2848 LE gas engine for combined heat and power Power: 255kWe/1,500 rpm information: The engine delivery range does not include a water pump, an ignition system or a gas mixing system! Standard scope of delivery â?¢ 8 cylinder four-stroke gas engine in V-arrangement based on MAN diesel engine single-cylinder heads, high-alloy valve seat rings and valves, form-forged crankshaft with screwed counterweights, wet cylinder jacks, piston cooling over oil spray nozzles â?¢ Compression ratio 14:1, biogas 1500 rpm â?¢ Main power oil filter, 2-fold, standing, not switchable with oil cooler â?¢ Closed crankcase ventilation with oil separator â?¢ Flywheel case SAE 1 â?¢ Flywheel I = 2.293 kgm2 for clutch SAE 11.5 and SAE 14 with tooth wreath â?¢ Anlassser â?¢ Valve s ...

GE UroView 2800 (urological x ray and fluoroscopy) with the following device components: Generator Jedi 00-883988 -01 _ 65 kW Tube Varian A-286 0.3/1.2 Image amplifier _ 00-884063-01 32.5 cm OEC workstation ESP Cine (trolley with double monitor) Sony Video Graphic Printer UP-960 CE Review-/double monitor (flat screen) complete and in good technical and cosmetic condition • The system was tested before dismantling of our employees on site. • It is located in our warehouse in Germany, packaged on pallets properly lashed down and wrapped in stretchfoil and can be picked up immediately. • You buy the equipments in "as in" condition from stock Freiberg (EXW), Saxony, Germany, and prepayment. • We are a used medical device dealer. We do not service or refurbish any of the items that we sell. All items are sold used and in as-is condition, unless otherwise stated. We do ...

FOR SALE... COMPLETE ENGINE STORK WARTSILA DIESEL 6SW 280 TO WHOM IT MAY CONCERN; WE VE COMPLETE ENGINE STORK WARTSILA 6SW 280 AT OUR STOCK PLS FIND ENGINE SPEC AT BELOW MODEL 280 6SW YEAR OF BUILT 1999 NUMBER 13098 POWER 1470kW RPM 750 MADE IN THE NETHERLAND ENGINE READY TO TRANSPORT EX STOCK. BESIDES WE VE ALSO MANY MAJOR PARTS OF THIS ENGINE CYLINDER HEADS / PISTONS / CON RODS ETC .. IF YOU'VE ANY FURTHER QUESTIONS PLS DONT HESITATE TO CONTACT WITH US. Capt. Ayhan Ugurluba BEST OF regards; Aliaga marine services E mail: info/aliagamarine.com PHN/fax: +90 232 618 03 90 Mobile: + 905556084850 aliagamarine.com TURKEY

Qty. 1 Second-hand 4 stands cold rolling mills – 4-Hi Mfc.: Fröhling Built: 1969 Revamped hydraulics: 1984 Dismantled and in storage 2018 Rolled material: Alloy AA5050, AlMg3 (Series 3000 & 5000) Type: 4-Hi Strip width max.: 282 mm Thickness: in 2.0 mm out 0.25 – 1.20 mm Speed max.: 400 m/min

N:18559 Date:27 12 85 Type:RSD 281 ratio: 4.704:1