IMA KILIAN PRESSIMA
(mint condition, just over 100 operating hours, year of construction
2007)
Accessories include a multi-tool set (5 × 4 mm) (new price:
€12,000, 6 months old) and a single tool set (5 mm)
Optionally, a control retrofit can be carried out with a Siemens
S7-1200 and a Siemens TP panel.
Tablet press as in the delivery condition, as new, with complete
documentation, functional software etc. !
The IMA KILIAN PRESSIMA tablet press is a compact, universally
applicable press for R&D. Thanks to its small dimensions, the PRESSIMA
can be easily installed even in small spaces.
Tool and die system
The PRESSIMA has a replaceable die disc. This means that B or D tools
can be used (EU or TSM standard).
Operation and display
• The PRESSIMA can be equipped with a measurement of the main press
force including a digital display on the machine panel for the
production of small batches.
Note: There is no regulation.
• The parameters set via handwheels are shown digitally on the
machine display.
________________________________________
Basic version – equipment
Mechanics
• Variable speed: 10–75 rpm
• Main compressive force: 50 kN
• Forward pressure force: 10 kN
• Diameter of die disc: 180 mm
• Filling shoe: two-wheeled filling shoe (leaves), adjustable
speed
(Chamber filling shoe optionally available)
• Handwheels for quick/easy operation and adjustment of:
Tablet thickness, main pressure, pre-pressure, filling
• Rotary flap between filling pipe and filling shoe
• Machine housing: stainless steel
• Frequency-controlled drive motor: 1.5 kW
• Easily accessible, paint-free stainless steel press chamber with
hard nickel-plated surfaces
• Solid design of the pre- and main printing stations
• Scrapers on lower and upper punches
• Brake magnets on the lower punches
• Standard 12 mm filling bar (17 mm on request)
• Lower plunger is lowered after dosing
• Lower slideway and lifting rail can be easily removed
• Extraction of the press chamber via central connection
• Central lubrication of the punches via manual lubrication pump
(automatic lubrication pump optional)
• Display of the machine status on the control panel
• Filling shoe motor built into the headjoint
Electrics
• Electrical control cabinet integrated at the back of the
machine
• Electrical installation: 400–480 V, 50/60 Hz
• Total consumption: 1.5 kW
• Digital display of parameters on the touchscreen control
terminal
• Installation according to VDE guidelines
________________________________________
Measuring points – especially for R & D
The PRESSIMA is equipped with a large number of measuring points for
R&D departments:
• Main print on top
• Main pressure at the bottom
• Top form
• Lifting force
• Scraping force
• The measured values are evaluated with the MS2300 hardware and
software in order to achieve an optimization of the product for future
production.
________________________________________
Explosion protection (note)
The machine is not supplied in an explosion-proof version. C6363729
________________________________________
Positions
Pos. Description Quantity
01001 Upper and lower punch shank holes with keyways (4.8 mm) for
guided tools 1
01002 Chamber Filling Shoe 1
01003 Hard chrome plating of die plate 1
01004 MS2300 for recording/analysis of up to 16 channels (including
top/bottom punch press force, upper pre-pressure force, lifting force,
scraping force; additionally path recording of upper/lower punch).
Required measurement signals can be ordered as an option. 1
01005 Measurement of the lifting force incl. measuring amplifier 1
01006 Measurement of the upper main compressive force incl. measuring
amplifier 1
01007 Measurement of upper pre-pressure force incl. measuring
amplifier 1
01008 Measurement of the scraping force incl. measuring amplifier 1
01009 Equipped with main press force measurement incl. display at
operating terminal 1
01010 Automatic lubrication pump for punches and slideways
(lubrication according to adjustable parameters) 1
01011 Set of accessories for type 8 MX: 4 blind dies EU-B, 4 blind
dies EU-D, 4 plugs (for EU-B/EU-D or TSM-B/TSM-D) 1
01012 Measurement of the understamp path 1
01013 Measurement of the Oberstempelweg 1
Accessories include a multi-tool set (5 × 4 mm) (new price:
€12,000, 6 months old) and a single tool set (5 mm)
Optionally, a control retrofit can be carried out with a Siemens
S7-1200 and a Siemens TP panel.
Germany
