khs filler used for sale

PET bottle air conveyor over 2 floors, used for 0.5 l, 1.0 l and 1.5 l bottles. Length approx. 50 m. Our team at VBW Asset Trade will be happy to answer your questions. Send us an inquiry or simply give us a call!, Additional title: PET bottle conveyor system, Capacity: 24000 b/h, Formats: 0,5, 1,0 l und 1,5 l PET-bottles, Material: mainly stainless steel, Position: free-standing on the floor / suspended from the ceiling, Features: Bottle transport channel with bottle guides, with 2 x 360° and additional curves, with a 15° incline and horizontal run, 5 frequency-controlled blower motors

Conveyor belts for PETCYCLE crates, consisting of motorised conveyor belts and gravity roller conveyors. Length approx. 70 m, Additional title: Crate transport routes, Capacity: 4000 crates/h, Formats: Petcycle box for 20 x 0.5 l, 9 x 1.0 l, 6 x 1.0 l and 6 x 1.5 l PET bottles, Operation / Control: Control panel / Siemens S7-300, Material: Mainly stainless steel, Position: Free-standing, Features: Hinge belt conveyors, roller conveyors, conveyor frames, drives, substructure, drip tray, control system

Conveyor belts for PET bottles, with 1-lane hinged belt chain and 6 lanes. Capacity: 24,000 bottles/hour, Additional title: Free bottle conveyors, Capacity: 24000 b/h, Free bottle transport approx.: 30 m, 90° bottle transport curves: 1 piece 1-chain conveyor, 180° bottle transport curve: 1 piece 6-chain conveyor, Formats: PET-bottles in 0,5 l, 1,0 l, 1,5 l, Operation / Control: controlbox / Siemens S7-300, Material: mainly stainless steel, Position: free-standing, Features: Conveyor frames, deflection stations, drives, frequency controls, electrical switchgear, automatic belt lubrication

Overview  This complete PET bottling line was manufactured between 2000 and 2012 by a group of reputable European manufacturers, including SIG Corpoplast, KHS, Sacmi, Kisters, Paxona, and others. The line is suitable for still and carbonated soft drinks and includes a blow moulder, filler, labeller, packer, and various conveyor and inspection systems. The line reaches up to 36,000 bph at 1.5L and is available promptly. All machines are well maintained and include original components and relevant peripheral equipment. Technical data  Capacity: 36,000 bph at 1.5L water 35,000 bph at 1.5L soft drinks (sweet) 32,000 bph at 1.5L soft drinks (light) Formats: 0.5L and 1.5L bottles PCO 28-1881 closure Filling product: Water and carbonated soft drinks (7.5g CO₂) Closure system: Screw caps, fed via chute and tipper (Zalkin + NSM) Packing: Shrink pack: 3x2 bottles (double lane) Pallet type: Eur ...

Overview  The glass depalletizer was manufactured by the German company KHS in 2005 and was until recently part of a bottling line in a German dairy company. The palletizer is now being released as the owner is shutting down the production. Technical details/ scope  Depalletizer with lift and discharge at the bottom With intermedeiate layer remover and magzine With slide for top layer/cover Enclosed conveyors can pull off single lane wise for shaped bottles Incl. protective fences, pallet transport, discharge table

Overview  This cold glue labelling machine was manufactured in 2004 by German company KHS. The machine was running until January 2025 and is now stored in the company. The labeller has a camera system for the orientation of the labels in the neck area for swing-top glass bottles. Technical data  Capacity: Up to 26,000 bottles per hour Working direction: anticlockwise Formats: 330 ml Longneck glass bottles 330 ml Steinie glass bottles 330 ml Swing-top glass bottles 500 ml NRW glass bottles Label positions: Front (up to 2 labels) Back (up to 1 label) With a Siemens S7 control New HMI touch panel in 2019

Technical Specifications & Performance Data The KHS Innofill-ER VF 143/20 is a high-speed used isobaric filling monoblock designed for premium glass bottle applications in beverage production. Engineered for reliability in industrial packaging environments, it offers consistent performance for soft drinks, sparkling water, and still water on a used bottling line. Manufacturer: KHS Model: Innofill-ER VF 143/20 Category: Filling Monoblock (Isobaric) Year of manufacture: 1994 Rated speed: up to 45,000 bottles per hour (format- and product-dependent) Filler configuration: 143 isobaric filling valves (rotary) Capper: 20-head Alcoa ROPP, 20 mm (rotary) Container types: Glass bottles Bottle formats: 0.70 L, 0.75 L Product types: Soft drinks, water (sparkling), water (still) Electrical: 50 Hz Condition: In storage Documentation & safety: Manuals available; safety features included Advanced Autom ...

Used filling KHS Innofill can line 16000 CPH - year 2018Technical Specifications & Performance DataThis complete used bottling line is a second hand beverage canning system engineered around a KHS can filler block, integrated with high-quality upstream and downstream packaging machinery. Designed for industrial packaging and beverage production, it delivers reliable performance for aluminum cans.Production speed: up to 16000 cph (cans per hour)Primary filler: KHS Innofill Can C (2018)Can seamer: Ferrum FC03 (2018)Depalletizer: SKA Fabricating Can-I-BusInspector: Heuft fill level detectorRinser: AV-C500 can air rinserDryer: Air Control Industries can dryerLabeller: Pack Leader (Advanced Dynamics system)Case packer: Atlanta Rafaello 726Case coding: SATO S86-EX printerConveyors: KHS and AE Conveyors, plus KBR outfeed belt conveyor with PCUtilities/auxiliaries: Conveyor lubricator (Loewados) ...

Overview  This complete hot-fill and cold-fill bottling line was manufactured in 1999 – 2017 by Germany KHS and Krones. The line is designed for beverage production in glass and PET bottles, supporting both hot-fill and cold-fill applications. It was in operation until the end of 2025, is still installed, and is available immediately. The line can be inspected on request. Technical data  Capacity: 12,000 – 36,000 bottles/hour (example: approx. 33,000 bph @ 500 ml) Formats: 250 ml – 1000 ml Application: Hot-fill and cold-fill beverage production Container types: Glass bottles and PET bottles (hot-fill) Filling temperature: 10°C – 104°C CO₂ capability: Yes Closures: Glass: 28 mm aluminium, 33 mm / 43 mm aluminium twist-off PET: 38 mm 3-start hot-fill closure Labelling: Cold glue paper labels (optional sleeve labelling available) Packaging: Wrap-around cartons and tray packagi ...

Overview This carbonator was manufactured in 1992 by Germany KHS. The KHS CX 30 is designed for the production of carbonated mineral water. The unit was upgraded by KHS in 2014 and has a capacity of up to 30,000 litres per hour. The machine was in production until March 2025, was dismantled in December 2025, and is currently stored in a warehouse in Bippen. The machine is available immediately. Technical data Capacity: 30,000 litres/hour Application: Carbonated mineral water Configuration: Carbonator with pumps, tank, and accessories CO₂ rate: max. 8 g/litre Drive: Siemens S7 Scope of Delivery Carbonator | KHS | CX 30 | 1992 (upgraded 2014) | Complete system Pump system  Tank | KHS  Control system | Siemens | S7 

Overview This complete automatic can filling line has a nominal output of approx. 20,000 cans/hour for 330 ml cans (can type 211/202), packed 24 cans per foil-shrunk tray. The core is an O+H / KHS Hansacan filler with 30 filling valves, mechanically blocked to a Ferrum F 505 G seamer with 5 seaming heads. Empty cans are supplied by a TMG Impianti Vega 120/B depalletizer and rinsed on a Hysek Rinsstar 20000 rinser before filling. A date/coding printer is not included. Technical data Line type: Complete automatic can filling line Nominal output: approx. 20,000 cans/hour (330 ml), product- and temperature-dependent Container: 330 ml can, can type 211/202; 24 cans per foil-shrunk tray Controls: PLC Siemens S7, Siemens SIMATIC HMI Warmer and drying station reconditioned; fill-height control and packaging machine new Equipment Can Depalletizer | TMG Impianti | Vega 120/B | tier-sheet removal,  ...

Overview This O+H / KHS Hansacan can filler, blocked with a Ferrum can seamer, is a rotary can filling and seaming monoblock for beverage cans. Filler and seamer are joined as a single unit, so cans run from filling straight through to seaming in one continuous flow. The block is set up for standard 330 ml cans (can type 211 / 202) and reaches a rated output of approximately 20,000 cans per hour, depending on product and filling temperature. The block was previously in production in a commercial brewery filling 330 ml cans and is currently at the workshop undergoing a complete reconditioning before delivery. Filling parameters and production data are managed via a Siemens SIMATIC touch HMI, with machine control on a Siemens S7 PLC. Technical data Manufacturer: O+H / KHS Model: Hansacan can filler Seamer: Ferrum can seamer, F 505 G Year of manufacture: filler 1992, seamer 2010 Machine typ ...

11082026 KHS Innopack Kisters SP High Speed Shrink Packer - 2017 This excellent condition KHS Innopack Kisters SP A-M high-speed automatic shrink packing machine was manufactured by KHS in 2017. It is designed for the efficient secondary packaging of beverage cans and bottles into retail-ready multipacks using shrink film. The machine has operated in less than 10,000 hours, maintained by the book and this in very good condition. Operation was stopped in the end of 2026. It has previously been used for packing beer and cider in 330 ml and 500 ml aluminium cans in package formats of 6 × 330 ml, 12 × 330 ml and 6 × 500 ml, but it can be easily configured into various other formats. It has an operating speed of up to approximately 80 tacts per minute and a total line production capacity of up to approximately 42,000 cans per hour, depending on container type and packaging format.  ...

On behalf of our client, we are selling this SIG Asbofill ABF (Aseptic Bottle Filler), 10-Lane, PET bottle filling machine which is designed for the aseptic filling of liquid, non-carbonated, microbiologically sensitive high- and low acid products into prefabricated plastic bottles. The client bought a new and bigger aseptic filling machine for extension of his production capacities. This machine is recently dismantled and located in the warehouse of the dairy factory., The machine was used the last 8 years to fill protein shakes and milk related drinks (cold fill) at the current factory. Before it was used for fruit juices. Sterility Assurance Level (SAL) of 6-log reduction. Shell of life of the current products: 9 months. Capacity: 12.000 bottles/h @ 1.000 ml, 10.000 bottles/h @ till 1.500 ml and 8.000 bottles/h @ till 2.000 ml. Filling accurancy: ± 2 ml (filling volume 1.000 ml). Bot ...

Overview This KHS Innopas P II SG 30-200 is a tunnel pasteurizer for bottled beverages in glass bottles, built in 1996 by KHS (Klöckner Holstein Seitz, Germany). With a treatment area of 113.5 m² across 8 treatment zones (3 of them recuperative), it pasteurizes at approx. 24,000 - 25,000 bottles per hour depending on bottle format, at a maximum pasteurization temperature of 75 °C. For 0.7 l glass bottles the total treatment time is approx. 48.6 minutes (21.2 min heating, 12.3 min pasteurization, 15.0 min cooling) at approx. 5 pasteurization units. The main control is a Siemens SIMATIC S5 PLC; the pasteurization unit setting (temperature diagram) was later upgraded to a Siemens S7 with touch panel. Danfoss frequency drives are fitted. The machine ran at a German mineral water bottling plant until mid-2024 and is now completely dismantled and professionally stored, with the conveyor bel ...

Overview Complete filling line for non-returnable glass bottles with an output of approx. 16,000 bottles/h at 0.75 L and approx. 20,000 bottles/h at 0.33 L. The heart of the line is a KOSME BARIFILL RFC 50-60-10 VKP rinser-filler-capper block built in 2013. New glass is fed by a Krones sweep-off depalletizer from 2020; downstream, the line comprises Krones CHECKMAT cap control, a KHS INNOKET cold-glue labelling machine with camera-based label orientation, a Krones WRAPAPAC wrap-around packer and a GEA Procomac OPERA palletizing system with Robopac stretch wrapper and Logopack pallet labelling. An attractive mid-range line for water, soft drinks, beer, cider and other glass-bottle applications. Technical data Year of manufacture: mainly 2013 Capacity: approx. 16,000 bph at 0.75 L / approx. 20,000 bph at 0.33 L Application: filling and packaging of non-returnable glass bottles Filling syst ...

Overview This KHS Innoclean is a single-end bottle washer for returnable glass bottles, built in 2007. It cleans and de-labels empty bottles before filling. The bottles are pushed into the cells of the carrier baskets, run on heavy roller chains through a pre-soak, two pre-warming baths, the main caustic soak with under- and over-caustic label flushing and three water spray zones, and are handed back onto the bottle conveyor at the discharge. Nineteen bottles are handled across the machine width in 4,275 cells. Output is adjustable between 2,800 and 14,500 bottles per hour; the machine was configured for 13,200 bottles per hour of 0.75 l glass bottles at 18.7 minutes total dwell time and 10.8 minutes of caustic contact. In 2022 KHS modernised drive and operator station. The machine runs the Triple-i-Drive with individual servo-controlled geared motors and is operated from a capacitive mu ...

AVE UNIBLOCK 16/16/4 Bottle fillers. However, I can suggest common features found in similar bottle filling machines, which may include:, - Filling Type: Gravity, Pump, or Gravity/Pump combination., - Production Rate: Typically measured in bottles per hour or minute., - Number of Filling Heads: In this case, it could refer to a 16-head system, meaning it can fill 16 bottles simultaneously., - Bottle Size Range: Specifications may include the range of bottle sizes the machine can handle., - Control System: May involve PLC (Programmable Logic Controller) for operations., - Material Construction: Stainless steel or food-grade materials suitable for hygienic applications., - Dimensions and Weight: Overall dimensions and weight for installation considerations., - Power Requirements: Voltage and power consumption details., Bottle Sizes: 250 ml, 500 ml, 1 Litre , 2 Litre , Cap Size: 38 mm, Capa ...

Used Used filler Vir Mauri for distillates 2.200 bph: Condition: As Is Used filler Vir Mauri for distillates Year: N/A Speed: 2.200 bph Direction: Clockwise Model: PAVONIS 16 16 valves Safety protections Code: T 190 More details: https://bottlingscout.com

Used Used filler Vir Mauri 9.000 bph isobaric: Condition: As Is Used filler Vir Mauri Year: n/a Speed: 9.000 bph Direction: Clockwise Number of valves: 36 Type of filling: isobaric Self-leveling De-gassing Code: T 189 More details: https://bottlingscout.com

Used Used Filler Dipran 30 valves 5.000 bph: Condition: As Is Used Filler Dipran 30 valves 5.000 bph: Speed: 5000 BPH Clockwise directions Suitable for: glass bottles 30 filling valves Filling type by high vacuum Valve type: mechanical Manual tank height adjustment Diameter measurements of the supported bottles 50-115 Machine dimensions: 2500 mm x 2500 mm x 3000 mm (h) Safety protections Code: T 206 More details: https://bottlingscout.com

Used Used Cobert gravity filler: Condition: As Is Year: N/A Speed: 1.500 Bph Direction: Clockwise Type of filling: gravity Number of filling valves: 12 Safety protections Code: T 196 More details: https://bottlingscout.com

Used Used Filler Bertolaso 24v isobaric: Year: 2001 Condition: As Is Model: Suprema 24 Year: 2001 Speed: 2400 BPH with 0.75 l bottle Direction: clockwise Suitable for glass bottles 24 valves Isobaric filler with mechanical valve equipped with: ? pre-evacuation (vacuum pump not present) -self-leveling -degassing Manual tank height adjustment False bottles Safety protections Code: T 204 More details: https://bottlingscout.com

Used Used oil filler Rcm 16 valves: Year: 1998 Condition: As Is Used oil filler Rcm 16 valves year: 1998 speed: 2.000 bph clockwise directions safety protections working machine Code: T 11 More details: https://bottlingscout.com

Used Used jars filler Cos.ma.pa | 1.000 bph: Year: 1990 Condition: As Is Used jars filler cos.ma.pa year: 1990 16 filling valves suitable for jars of 3 l and 5 l clockwise direction speed: 1000 bph gravity filling pitch : 250 mm Code: T 25 More details: https://bottlingscout.com

PET line for 0,5l Filler XRB 16, year: 1997 Power: 3000 bottles / St

Used Used filler Vir Mauri Mutina isobaric 5.000 bph: Year: 1997 Condition: As Is Used filler Vir Mauri Mutina | isobaric Filler isobaric 36 valves Year: 1997 Velocit?: 5.000 bph with still wine 4.000 bph with champagne Clockwise directions Bottles equipments: da 0.375 a 0.75 l Safety protections Code: T 33 More details: https://bottlingscout.com

Used Used filler Alfatek low vacuum 3.500 bph: Year: 1995 Condition: As Is Used filler Alfatek 20 valves Year: 1995. Speed: 3.500 bph Direction: Clockwise Filler 20 valves Type of filling: low vacuum Safety protections Code: T 82 More details: https://bottlingscout.com

Used Used filler Ocim vacuum filling 3.000 bph: Year: 1988 Condition: As Is Used filler ocim vacuum filling Year: 1988. Speed: 3.000 bph. Direction: clockwsie. 20 valves | vacuum filling Bell variable in height. Mechanical spring bottle lifting pistons. Machine all in stainless steel. Code: T 87 More details: https://bottlingscout.com

Used Used filler BC Maxima rp 16 isobaric 1.500 bph: Year: 1982 Condition: As Is Used filler isobaric bc Model: maxima rp 16 Year: 1982 Speed: 1500 bph Direction: clockwise 16 valves isobaric filling: Degassing Bottle formats: cl.75 e cl.150 Safety protections Code: T 93 More details: https://bottlingscout.com

Used Used filler Alcos volumetric dosing 4.800 bph: Year: 2012 Condition: As Is Used volumetric dosing machine Alcos Year: 2012. Speed: From 500 mg ? 4.800 pz/h. From 500 a 1.000 mg ? 2.400 pz/h. Direction: linear 2 heads Volumetric filler Safety protections Code: T 99 More details: https://bottlingscout.com

Used Used filler Bertolaso PET bottles 3.500 bph: Year: 1990 Condition: As Is Filler bertolaso Type of bottles: PET Bottles Year: 1990 Speed: 3.500 bph Valves: 32 Direction: counterclockwise Workable bottle type: pet and glass Bottles formats: 1.5 Lt ? 1Lt ? 0.75 Lt Safety protections: yes Bertolaso filler Code: T 155 More details: https://bottlingscout.com

Used Used filler for oil 14 valves 2.000 bph: Year: 2004 Condition: As Is Used filler oil | 2004 Year: 2004 Speed: 2.000 bph Direction: clockwise Number of valves: 14 Type of filling: high vacuum Type of product: oil Safety protections Code: T 174 More details: https://bottlingscout.com

Used Used filler BC Rpea 16 isobaric | 2.000 bph: Year: 1990 Condition: As Is Used filler BC isobaric Year: 1990 Speed: 2.000 bph Model: rpea 16 Number of filling valves 16 Isobaric filling: Pre-evacuation Self-leveling De-gassing Safety protections Code: T 180 More details: https://bottlingscout.com

Used Used filler Alfatek 6.24 WLP 3.000 bph: Year: 2005 Condition: As Is Used filler alfatek 6.24 wlp Year: 2005 Speed: 3.000 bph Direction: clockwise Deox station 6 heads (pre-evacuation) Filler 24 valves Centralized regulation of levels Model: wlp Safety protections Code: T 182 More details: https://bottlingscout.com

Used Used filler Vir Mauri 24 valves isobaric 2.000 bph: Year: 1982 Condition: As Is Used filler Vir Mauri 24 valves with isobaric filling system: Year: 1982 Speed: Champagne: 1.500 bph Sparkling: 2.000 bph Still wine: 2.800 bph Direction: clockwise Number of filling valves: 24 Type of filling: isobaric filling Mechanical valve Pre-evacuation Self-leveling De-gassing Safety protections Code: T 184 More details: https://bottlingscout.com

Used Used filler Ecolean aseptic packaging 12.000 pz/h: Year: 2013 Condition: As Is Used Filler ecolean | 2013 Year: 2013 Speed: 12.000 pz h Model: el4 Type of filling: gravity filling Aseptic packaging Sanitization cip Formats: bricks 125 ml, 200 ml, 250 ml Safety protections Code: T 185 More details: https://bottlingscout.com

Used Used filler Cobert Olimpia 32 gravity filling: Year: 1985 Condition: As Is Used filler Cobert: Year: 1985 Speed: 3.500 BPH Model: Olimpia 32 Direction: Clockwise 32 Filling Valves | Gravity Filling Safety protections Code: T 187 More details: https://bottlingscout.com

Used Used filler Sifa for cask 40 cask/hour: Year: 1999 Condition: As Is Used filler cask Sifa Year: 06/1999 Speed: 40 cask/hour Model: MASTERKEG Single filling valve Internal cask washing Rinse Filling For still and sparkling wine Workable formats: 20 L, 25 L e 30 L Including incoming and outgoing tapes (2.5m + 2.5m) Safety protections Code: T 194 More details: https://bottlingscout.com

Used Used Isobaric Filler Cortellazzi 24: Year: 1986 Condition: As Is Used Isobaric Filler Cortellazzi 24: Year: 1986 Speed: 2.500 bph | champagne 5.000 bph | still wine Direction: clockwise Model: vega 24 24 valves | isobaric De-gassing Pre-evacuation Safety protections Code: T 152 More details: https://bottlingscout.com

Used Used Filler MBF Filltronic 36V 7.000 bph: Year: 2026 Condition: As Is Model: Filltronic Year: 2004 Speed: 6.000 BPH da 1 l Speed: 7.000 BPH da 0.75 l Rotation direction: clockwise 36 mechanical valve Filling type: light depression Universal clamps Electric height adjustment Safety protections Code: T 210 More details: https://bottlingscout.com

Used Used Filler Borelli 1.100 bph: Year: 2023 Condition: As Is Model: RM Year: 2023 Speed: 1100 BPH Direction of rotation: clockwise Type of bottle: glass bottle 8 valves Type of filling: gravity Dearation system Safety protections Code: T 209 More details: https://bottlingscout.com

Used Used filler BC: Year: 1997 Condition: As Is Model: RPEA 32 Year: 1997 Speed: 5.000 bph on still wine, 2.800 bph on sparkling wine Direction of rotation: clockwise Type of bottle: glass bottle 32 mechanical filling valves Filling type: Isobaric Valve functions: single pre-evacuation / auto-level / degassing Electric tank height adjustment Safety protections Code: T 211 More details: https://bottlingscout.com

Used Used Vimercati filler: Year: 1990 Condition: As Is Year: 1990 Speed: 3,000 bph (bottles/hour) Rotation direction: clockwise Processable container type: glass bottle 32 valves Filling type: isobaric Valve type: mechanical Valve function: degassing Safety protection Code: T 212 More details: https://bottlingscout.com

Used Used Alfatek isobaric filler 32v: Year: 1999 Condition: As Is Brand: Alfatek Year: 1999 Speed: 3.000 bph Direction: Clockwise Type of filling: Isobaric Product: still and sparkling wine, sparkling wine 32 filling valves Safety protections Code: T 202 More details: https://bottlingscout.com

Description Item #8386 – POT FILLER & SEALER Preformed two section pot with chocolate spread in one half, long conveyor for operator to manually insert surprise toy in the other half of the pot to tray sealer Manufactured by MONDINI With Tray pot denester, filling depositor Model C/T. 400Volts, 3Phase, 50Hz. Filling small 22gramme plastic pots with chocolate cream/spread long conveyor for manual placing a surprise toy included in the pack To Mondini tray sealer.

Description Item #8483 – POUCH FILLING MACHINE FOR DRINKS Manufactured by GUALAPACK Model CHP30, Filling & Capping Machine, currently used for sports drinks, including TECHNO VIBRAZIONI Cap Feeder, Model VD5N, Empty preformed pouches on racks are placed on machine, then they are filled on a rotating board which also caps them. capacity up to around 30 per minute, currently running on 74mms wide x 181mms high (plus cap) pouches.

Description Item #9008 - POWDER SACHET MACHINE Manufactured by VOLPAK Duplex Sachet Machine Model S-240-D set up to do individual sachet size 70 x 70mms, duplex at 50 strokes per minute, (100 sachets per minute) Suitable for maximum size sachets of approx.150 x 150mms For Preprinted foils, there is a photo electric cell to recognise a mark on the foil It was being used for packing Herbs & Spices, most products were dry salt based” products Foil Transportation through machine id done with Pins Opening of the Bags/sachets by suction cups Including Twin Auger Dosing unit Including MARKEM SmartDate X40 Coding Unit 415Volts, 50Hz, 16.2 Amp

Description Item # 9163 - DOYPACK SACHET MACHINE Manufactured by HOELLER doypack with zip closure this is a Hoeller machine from the 1960ies that has been refurbished several times, both by HDG and Laudenberg HDG identification plate shows year 2001, model BMH-ZIP There is NO doser or scale to go with the machine - Bagmaker only The condition is: ran when moved into storage, kept as a back up, but it is worn out and in need of some refurbishment

Description Item # 9296 - TUBE FILLER Manufactured by NORDEN Model 700 aluminium tubes previously used for paint, last in production around July 2025 Year 1997 with Date Embosser with parts for 15ml 40ml, 60ml, 225ml. Circumferences: 19mm, 25mm, 30mm, 45mm 380volt, 50hz