kg used for sale

Horizontal long belt grinding machine make JOHANNSEN type MS 85 DKMachine -No: 18741 built in 1990Technical specifications:Working range: 3000mmlargest workpiece height: 320 mmWorkpiece width: 1000 mmGrinding speed: 11 and 22 m/sec.Table size: 3500 x 950 mmTable vertically adjustable: 340 mmRequired air volume: 40 m³ / min.Band length / width: 9200 / 150 mmBelt drive: 3.6 / 5.3 kWWeight approx.: 800 kgArea requirement approx.: 4650 x 2300 mmWith- Motorized table height adjustment- Special version for changing the grinding length to 3.0 m- Explosion protection for aluminum processingused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools ...

Welding turntable make HEINRICHSGLÜCK type H 6Machine -No: 0203994/21796 year of manufacture 1978Technical specifications:Load capacity: 600 kgTurntable diameter: 700 mmExternal dimensions approx.: 1200 x 900 x 1000 mmwith- Infinitely variable speeds- foot switch- tiltableused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Combined wood milling machine with crosscut saw make STEHLE type FC 3 BMasch. -No: 12761 Year of construction Nov. 1966Table height: 855 mm4 milling spindle speeds: 3000/6000/5000/10000 rpm.Milling diameter: 30 mmSpindle cone: MK 5Height adjustment of the milling shaft: 115 mmSaw blade diameter: 350 mmSaw blade hole: 30 mmGreen cutting height: 110 mmSaw blade speed: 2800 rpm.Drive power: 3/4 / 2.2 kWDimensions L x W x H: 1910 x 1950 x 1200 mmWeight approx: 880 kgWith- Swing arm roller table 1040 x 460 mm- Footbrake double-sidedused, despite the year of construction in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Welding turning device (roller block) make APS type RL 5000Serial -No: 1187 built in 1981Technical specifications:Max. container weight: 5000 kgused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Model construction - milling machine make ZIMMERMANN type FZ 1Year of construction 1987for model and mold making, for wood and light metalTechnical specifications:Longitudinal travel X: 420 mmCross travel Y:4 20 mmVertical travel Z: 400 / 600 mmMachine table (foot): 630 x 490 mmAttachment milling table: 490 x 400 mmRound table movement: 360°Projection: 400 mm8 spindle speeds: 560 - 14000 rpm.Spindle mount: ISA 30Drive power: 1.1 kWPower connection: 380 V / 50 HzWeight approx.: 500 kgExternal dimensions approx.: 1000 x 1000 x 1300 mmwith- rotating top table- several tool holders ISA 30- 3-axis digital readout Mitutoyo- Rolling drawer cabinet- tilting head- 6 milling arbors- Angle milling headused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pl ...

Welding turntable make ART Welding type AP 6Serial -No: 2016066 Year 2016Technical specifications:Load capacity: 600 kgWorking table diameter: 800 mmTilt Angle:-95° / +15°Tilting speed: 0.35 rpm.Speed: 0.09 - 0.9 rpm.Drive power: 1.5 kWWeight approx.: 700 kgDimensions approx.: 1100 x 570 x 1300 mmused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

milling machine make SCHNNEIDER type SK 2/3Year of construction 1980 with electric roll feedTechnical specifications:MILLING MACHINE:Milling spindle diameter: 30 mmMax. Clamping height: 150 mmSpindle speeds: 3000/6000, 4000/8000: and 5000/10000 rpmMotor power milling motor: 3.0 / 4.0 kWTable opening diameter: 400 mmMilling fence rotatable: 360 °Working height: 880 mmROLLING TABLE:Roller table working path: 1300 mmTable size: 1070 x 910 mmRoller table size: 1150 x 300 mmSpace requirementwith roller table: 1900 x 1300 mmWeight approx: 820 kgWith- hemming head- Set of thrust rings- knife set- Milling head for handrail- Groove milling head- roll feedused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always av ...

Vertical Band Saw Machine make PEHAKA type SLA 8Machine -No: 31540 30211for non-ferrous metals, wood, plasticRoll diameter: 800 mmDischarge: 760 mmCutting height approx: 490 mmTable size: 790 x 815 mmBelt speed: 1200 m / mingr. Blade length: 5950 - 6200 mmBandwidth: 12 - 25 mmMotor power: 5.5 kWWeight approx: 900 kgOutside dimensions approx: 900 x 1900 x 2720 mmused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Precision Circular Saw Fabr. ULMIA Type 1710Machine -No: 580 built in 1977Table size: 630 x 500 mmHeight adjustment of the saw shaft: 60 mmMax. Saw blade diameter: 250 mmMax. Cutting height: 77 mmSaw blade hole: 20 mmSpeed: 4500 rpm.Table height: 820 mmOutside dimensions approx: 900 x 1200 x 900 mmWeight approx: 88 kgWith- tiltable saw blade- height adjustable saw bladeused, in very good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Surface planer make SCHMIDTechnical specifications:Planing width: 260 mmTable size: 830 x 260 mmPower connection: 380 V / 50 HzDimensions approx: 850 x 450 x 900 mmWeight approx: 100 kgusedPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Hydraulic mobile log splitter make GÜDE type DHH 1050 / 10 TZMasch.-No: 403512 Art.-No: 01970 year of manufacture 2000Technical specifications:Gap pressure: 10 tOperating pressure: 230 barStroke Length: 525mmMax. gap diameter: 400 mmColumn: 120 x 120 mmTable size: 250 x 250 mmApprox. weight: 92 kgExternal dimensions approx.: 580 x 910 x 1640 mmwith- Drive via PTO connection- GE + GS - signs- Two-hand safety operation- Splitting lifting devicelittle used, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Long belt sander Fabr. JOHANNSEN type T 8 Emachine -No: 14467, built in 1980Grinding length: 2400 mmTable size: 2500 x 950 mmUsable grinding width: 1000 mmTable lift: 470 mmBand dimension: 7100 x 150 mmRight turn: 300 mmDrive power: 4 kWWeight: 575 kgExternal dimensions: 3820 x 2000 mmWith- built-in fan, air flow 1200 m³ / hused, from vocational school in very good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Edge sanding machine make LÖWER type KS 225Machine -No: 1931 built in 1988Technical specifications:Sanding belt width: 150 mmSanding belt length: 2250 mmWork surface: 150 x 800 mmBelt speed: 16 m / sec.Tape roll diameter: 110 mmDrive power: 1.1 kWWeight: 77 kgExternal dimensions approx .: 1300 x 400 x 1000 mmWith- swiveling sanding table- tiltable tableused in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Format circular saw make ALTENDORF type F 90Serial -No: 6911133 year of manufacture 1969Technical specifications:Cutting length: 2800 mmCutting width: 1000 mmCutting height: 0 - 55 to 75 - 155 mm4 speeds: 3000 / 4000 / 5000 / 6000 rpm.Saw blade diameter :250 - 450 mmSaw blade bore: 30 mmDrive power: 5.5 kWPower connection: 380 V / 50 HzApprox. weight: 970 kgwith- Scorerused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Joining and fine cutting machine / veneer saw make SCHEER type FM 8/3100Machine -No: 72824Technical specifications:Cutting length: 3100 mmCutting height: 45 mmSaw blade diameter: 180 mmFeed: manualPower requirement: 1.8 kWDimensions: 3950 x 470 x 920 mmWeight approx: 400 kgused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

TECHNICAL DATA INTERNAL MIXER: MODEL: GK 135 E - with interlocking rotor geometry VOLUME OF THE MIXING CHAMBER: 140 ltr. USABLE VOLUME: approx. 100 ltr. BATCH WEIGHT: approx. 120 kg SPEEDS: 10/10-50/50 rpm DRIVE POWER: 600 kW RAM ACTUATION: hydraulic The machine consists of 3 parts: substructure, housing and hydraulic funnel. The transmission is also part of the offer (engine and VFC can be offered). ______________________________________________________________________ _____ TECHNICAL DATA HEAVY DUTY INTERNAL MIXER: MODEL: GK 135 E - with intermeshing rotor geometry VOLUME OF MIXING CHAMBER: 140 ltrs. USEFUL VOLUME: approx. 100 ltrs. BATCH WEIGHT: approx. 120 kgs ROTOR SPEEDS: 10/10-50/50 rpm DRIVE POWER: 600 kW RAM ACTUATION: hydraulic The machine is in 3 piece design including basement, body and hydraulic hopper. The gearbox  ...

Vertical wood milling machine (router) make SCM type T 120 CMachine -No: 1170480, built in 1980Table size: 1100 x 900 mmTable height: 850 mmvertical adjustment of the spindle: 185 mmSpindle diameter: 35 mm5 spindle speeds: 2900 - 10000 rpm.Max. Diameter of tenon cutting disc up to: 400 mmDrive power: 7.5 hpWeight approx.: 610 kgOutside dimensions approx. 1120 x 900 x 850 mmWith- mot. Roll feedused, in very good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Machine Details Warehouse number 1105-03648 Machine type CNC lathe - inclined bed machine Make DOOSAN DAEWOO Type PUMA 200 M Year of construction 1999 Control type CNC Control FANUC O T Storage location FRANCE Country of origin KOREA Delivery time by arrangement Freight base from location Price Technical details Turning diameter 290 mm Turning length 600 mm Control FANUC O T Bore diameter 66 mm Spindle speed 45-4500 rpm Revolver 12 COMPARTMENT Pinole diameter 80 mm Spindle head ASA - A 2 - 6 front bearing diameter 90 mm Tailstock pinole diameter 80 mm Centering bore mt - 5 Pinole travel 100 mm Axialkraf 12 , 5 - 500 kgf Sauter tool system driven tools 6 Number of tools max. 12 Total power requirement 36 kVA Machine weight approx. 4.2 t Information Equipment and accessories: Chip conveyor, C-axis, 12x star turret with AGW. TOOLS AND C AXIS FANUC O T ...

TECHNICAL DATA INTERNAL MIXER: MODEL: GK 255 N - with tangential geometry ZZ2 VOLUME OF THE MIXING CHAMBER: approx. 250 ltr. USABLE VOLUME: approx. 190 ltr. BATCH WEIGHT: approx. 230 kg ROTOR speeds (standard): 0-60 rpm DRIVE POWER: 1500 kW Hydraulic feeding with 2 hydr. Cylinders The machine consists of 3 parts: substructure, housing and hydraulic funnel. The transmission is also part of the offer (engine and FU can be offered). ______________________________________________________________________ _____________ TECHNICAL DATA INTERNAL MIXER: MODEL: GK 255 N - with tangential geometry ZZ2 VOLUME OF MIXING CHAMBER: approx. 250 ltrs. USEFUL VOLUME: approx. 190 ltrs. BATCH WEIGHT: approx. 230 kgs ROTOR SPEEDS (standard): 0-60 rpm DRIVE POWER: 1500 kW RAM ACTUATION: hydraulic The machine is in 3 piece design including basement, body  ...

Manufacturer: AIDA ENGINEERING LTD. Made in: Japan Presses are never used, condition is like new. Feeders and straighteners are available. Capacity: 80 tons Rated tonnage point: 6,5 mm Stroke: 200 mm Number of strokes per minute: 60-150 Bolster area (left-to-right x front-to-back): 1400 x 500 mm Slide area (left-to-right x front-to-back): 1400 x 500 mm Bolster thickness: 200 mm Distance between slide and bolster: 450 mm Slide adjustment: 50 mm Main motor: 45 kW Required air pressure: 5 kgf/cm² Total weight: 33 tons Roll feed Material width: 70=300 mm Material thickness: 0,25-0,4 mm Feed length: 50-120 mm Feed angle: 300-60 deg Uncoiler Coil diameter: 800-1200 mm

FANUC M-710iC/50 robotic welding machine is used to perform the pad welding process – coating the surface of molten workpieces with a layer of powder, in order to complete defects in the workpiece or to give it new features. The robotic welding machine includes: – FANUC M-710iC/50 robot – COHERENT HighLight D-Series 10kW laser head – COHERENT HightLight 10000D laser head controller – THERMACH INC. AT-1200 POWDER FEEDER powder feeder unit – RIEDEL chiller PC 321.2H6LE.I – rotary table, consisting of TAKOMAT RT400 turntable and FANUC motors The FANUC M-710iC welding robot is distinguished by its robust, completely water- and dust-resistant body and its compact dimensions, which allow it to be installed in any position on a limited amount of space. All this, combined with high axial speeds and a reach of 2050 mm, makes the FANUC M-710iC/50 robot perform perfectly w ...

Sychron motor with ball screw, MDD115C-N-015-N2M-130GB2, Rexroth, mint condition Special price High quality parts from a major car manufacturer! If you have a VAT number, we will gladly issue you an invoice without VAT. As good as new with traces of storage! The assembled linear actuator comes from a spare parts store of a mechanical processing. Year of manufacture 2008. The parts are as good as new, but have minor storage traces. Technical data: 1 complete linear actuator, 119x29x20cm, ca. 150kg, consisting of: - 1 pc Sychnron motor MDD115C-N-015-N2M-130GB2, R911262637, from Rexroth, permanent magnet motor, max. 75Nm, 1500rpm, 55kg, - 1 pc Motor bell with bearing for the ball screw drive and 2 clamping sets for fastening the ball screw drive to the motor, Grob, - 1 pc ball screw drive 1516.319/10.50.353.591 T3, D50mm, total length of the screw approx. 591mm, thread  ...

Product number: 2495 Type:O² 7000 Serial number: O07923 Year of construction: 2016 Dye: (5x) 148 x 233 mm Compressed air: 6 - 8 Bar Power: 3 x 400V, 50Hz, 20kW Dimensions5800 x 900 x 2400 mmWeight3000 kgFor vacuum and gas flush Including tool trolley

Sychron motor with ball screw, MDD115C-N-015-N2M-130GB0, Rexroth, mint condition Special price ! High quality parts from a major car manufacturer! If you have a VAT number, we will gladly issue an invoice without VAT As good as new with small traces of storage! The assembled linear actuator comes from a spare parts warehouse of a mechanical processing. Year of manufacture 2011. The parts are as good as new, but have minor traces of storage. Technical data: 1 complete linear actuator,181x29x20cm, ca. 150kg, consisting of: - 1 pc Sychnron motor MDD115C-N-015-N2M-130GB0, R911262636, from Rexroth, permanent magnet motor, max. 75Nm, 1500rpm, 52kg, - 1 pc Motor bell with bearing for the ball screw drive and 2 clamping sets for fastening the ball screw drive to the motor, Grob, - 1 pc ball screw drive 1516.339/10.63.1033.1276 P3, D63mm, total length of the screw approx. 1276mm ...

Sychron motor with ball screw, MDD115C-N-015-N2M-130GB0, Rexroth, mint condition Special price ! High quality parts from a major car manufacturer! If you have a VAT number, we will gladly issue an invoice without VAT As good as new with minor traces of storage! The assembled linear actuator comes from a spare parts warehouse of a mechanical processing. Year of manufacture 2011. The parts are as good as new, but have minor traces of storage. Technical data: 1 complete linear actuator, 181x29x20cm, ca. 150kg, consisting of: - 1 pc Sychnron motor MDD115C-N-015-N2M-130GB0, R911262636, from Rexroth, permanent magnet motor, max. 75Nm, 1500rpm, 52kg, - 1 pc Motor bell with bearing for the ball screw drive and 2 clamping sets for fastening the ball screw drive to the motor, Grob, - 1 pc. ball screw 1516.339/10.63.1033.1276 P3, Fa. Steinmeyer, D63mm, total length of the screw ap ...

Sychron motor with ball screw, MDD115C-N-015-N2M-130GB2, Rexroth, mint condition Special price High quality parts from a major car manufacturer! If you have a VAT number, we will gladly issue you an invoice without VAT. As good as new with traces of storage! The assembled linear actuator comes from a spare parts store of a mechanical processing. Year of manufacture 2011. The parts are as good as new, but have minor storage traces. Technical data: 1 complete linear actuator, 169x29x20cm, ca. 150kg, consisting of: - 1 pc Sychnron motor MDD115C-N-015-N2M-130GB2, R911262637, from Rexroth, permanent magnet motor, max. 75Nm, 1500rpm, 55kg, - 1 pc Motor bell with bearing for the ball screw drive and 2 clamping sets for fastening the ball screw drive to the motor, Grob, - 1 pc ball screw drive 1516.310/10.63.848.1091 P3 D63mm, total length of the screw approx. 1090mm, thread ...

Sychron motor with ball screw, MDD112D-N-030-N2M-130GB2, Rexroth, mint condition Special price High quality parts from a major car manufacturer! If you have a VAT number, we will gladly issue you an invoice without VAT. As good as new with traces of storage! The assembled linear actuator comes from a spare parts store of a mechanical processing. Year of manufacture 2011. The parts are as good as new, but have minor storage traces. Technical data: 1 complete linear actuator, 185x26x28cm, ca. 250kg, consisting of: - 1 pc Sychnron motor MDD112D-N-030-N2M-130GB2, R911260224, from Rexroth, permanent magnet motor, max. 75Nm, 3000rpm, 62kg, - 1 pc Motor bell with bearing for the ball screw drive and 2 clamping sets for fastening the ball screw drive to the motor, Grob, - 1 pc ball screw drive 1516.78/10.80.910.1189 P3 D80mm, total length of the screw approx. 1189mm, thread  ...

Ground precision ball screw, D40 mm, 1088 mm, Wulf Hatzfeld, new As good as new in original packaging! The high quality part comes from a spare parts warehouse of a mechanical processing of a large car manufacturer, is completely as new and in the original packaging. Attention: We have many, in stock, high quality ball screws in different versions in the diameters 32, 40, 50, 63 and 83mm. Please have a look at our website of IPV GmbH. Ball screw, KGT 40 mm, 1088 mm, Fa. Wulf Hatzfeld Ball screw diameter 40 mm, Pitch 10 mm, Length of thread 865 mm Length of ball screw nut 136 mm, Max. total stroke 729 mm, Total length of the spindle 1088 mm Diameter for coupling with motor 24 mm Diameter bearing seat A 30 mm, Diameter bearing seat B 30 mm Functional guarantee! We cannot provide a conventional guarantee and warranty for second-hand parts. However, we give you a func ...

Producer: HUTA ZYGMUNT, Model: MPM 6300B, Origin: Poland, New in: 1978, Force: 2500 kGm, Stroke of ram: 850 mm, Space between shears: 650 mm, Length of die seat in ram: 650 mm, Length of die seat in cushion: 900 mm, Max. weight of top die: 800 kg, Min. die height: 300 mm, Strokes/min: 100,

Multi-spindle Gundrilling Machine Manufacturer: Mollart Type: Omnisprint YOM: 2000 Serial number: A438-0700 CNC Control: GE-Fanuc 18 M 2 Spindles Min-Max drilling diameter: 3-12 mm Max Drilling depth: 500 mm X axis cross travel: 500 mm Y axis vertical travel: 250 mm Z axis travel: 800 mm Spindle centre distance: 250 mm X-axis rapid traverse speed: 10 m/min Y-axis rapid traverse speed: 4 m/min Z-axis rapid traverse speed: 10 m/min Work table dimensions: 600x600 mm Spindle centre height from table: min 117 max 377 Max weight on table: 680 Kgs A.C. Spindle motor power: 3.7 KW Spindle speed range: 0-10,500 rpm Drill feed range (infinitely variable): 0 mm-4.000 rpm Feed motor torque (continuous): 5.9 Nm Weight of the machine: 4500 kg Weight of the coolant system (dry): 1000 kg Coolant ...

350 Ton Crawler Crane KOBELCO”, Model CKE4000C Mastertech (2007) Max. Lifting Capacity - 350 t /6.0 m Boom Length - 18 m to 78 m Main & Aux. winch Max . Line speed: 130 m/min (5th layer) Wire Rope: 28 mm Brake Type: Spring set hydraulically release brake Working speed Swing Speed: 1.3 min-1 {rpm} Travel Speed: 1.0/0.4 km/h Power Plant HINO”, Model K13C-UV Engine Output: 295 kW/2,000 min-1 {rpm} Fuel Tank Capacity: 600 liters Hydraulic System Main Pumps: 6 variable displacement pump Max. Pressure: 31.9 MPa {325 kgf/ cm2 } Self-Erection Device Weights Operation Weight: Approx. 346 t Counterweight: Std. 120 t (Upper) + 41 t (Lower) Transport Weight: 60.0 t (Main machine) Ground Pressure: 150 kPa {1.52 kgf/cm2 } Make KOBELCO Year 2007 Capacity 350

1 of used stretch-wrapper, make Lantech, type Q 600, new 2007. Siemens S7 controls. With turntable. Capacity upto 45 loads/hour. Min load size 91.4 x 91.4 x 61 cms, max load size 137 x 122 x 233 cms. Max load weight 1.800 kgs.Dismantled and ready for shipment. Excellent condition!

Nominal mass of falling parts, taking into account the mass of the upper stamp (500 kg.), Kg. 5000 Actual mass of falling parts without top stamp, kg. 5030 Effective kinetic energy of falling parts at full successive impacts, kgc m 12500 The greatest working stroke of a woman, mm. 1300 The smallest height of dies without shanks, mm. 400 Distance between guides in the light, mm. 800 The length of the woman in the direction perpendicular to the front of the hammer, mm. 1180 Steam (air) pressure before entering the cylinder, atm. 7-9 Nominal mass of the upper die, kg 500 The largest mass of the upper die, kg. 1500 The highest permissible steam temperature, ⁰C 200 weight 145-148ton, weight of anvil block 75+22 ton.

Code 220406 Description of fast radial MK-4 Brand DONAU Type DR – 32 Machine r. 686 – 3 Year of construction ± 19.. Capacity in steel 60 32 mm Capacity in GG 45 mm Tapping in steel 60 M 26 Thread cutting in GG M 36 Spindle holder 4 MK Projection 900 mm Table 1200 x 600 mm Vertical movement of the boom 400 mm Spindle stroke 190 mm Spindle table min. – max. 80 – 650 mm 18 spindle speeds 31 – 1370 rpm Spindle feeds 0.1 – 0.15 – 0.2 – 0.3 mm/rev Power 1.5 / 2.2 kW – 380 volts Accessories tapping device Dimensions Br. x D x H 1200 x 1600 x 1910 mm Weight 1700 kgs Condition machine is in normal condition

Qty. 1 Second-hand asphalt plant – already dismantled and in storage Mfc.: Nikko Ltd Type: NAP-3000ABP Built: 1990 Vibration Sieve changed in 2017 Replaced burners & dryer unit in 2020 (USD 300,000.00) New PLC system in 2021 (USD 400,000.00) Capacity: 180-210 Ton/Hour (Per Batch 3000 Kgs) Voltage: 220 V, 3 ph., 50/60 Hz

BALESTRINI TEAM automatic CUTTING , END MILLING and DRILLING MACHINE machine for joining parts of chairs, living rooms, furniture, etc. the TEAM machine is made up of 3 operating units: 1st unit: circular saw for cutting workpieces to length 2nd unit: spindle moulder for milling 3rd unit: drilling unit with multiple center distance head . there are 9 work programs that can be choiceed and they consist of the possible combinations of use of the 3 operating units. only 2 can be used , or 1 , or even the 3 operating units can work in different sequences . all units are operated by a hydraulic pump to obtain adjustable and smooth movements Technical data : - Cutting unit (circular saw) diam.mm.400. engine power Hp 3 - Moulding unit (spindle moulder) shaft diameter mm.30 . motor power Hp 5.5 max. tool dimensions mm.160, H=mm.120 - Boring unit . engine power Hp 3 . max. depth ...

Code 230302 Description of fast radials Brand DONAU Type DR – 13 G Machine r. 321 – 2 Year of construction 1966 Capacity in steel 60 13 mm Capacity in GG 16 mm Thread cutting capacity in steel M8 – M 10 Thread cutting capacity in cast iron M 10 – M 12 Spindle holder 2 MK Projection 820 mm Table 1000 x 700 mm Vertical movement of the boom 400 mm Spindle stroke 100 mm Spindle table min. – max. 180 – 580 mm Spindle speeds infinitely variable in 2 steps 200 – 1100 / 600 – 3400 rpm Power 0,37 / 0,44 kW – 380 Volt Dimensions Br. x D x H 1000 x 1300 x 1800 mm Weight 590 kgs Condition machine is in normal condition

1 of un-used! column-mounted, industrial manipulator / lifting device (balancer), make Dalmec, type Posifil PFC, new 1998. Standard column 2.300 mm tall. Designed for a maximum lifting load of 30 kgs. Maximum radius 3.000 mm. Vertical stroke 1.500 mm. With special gripper designed to lift, lower and tilt products approx. 45 degrees. Assumed application was handling storage bins 470 x 350 mm (pictures show example only, not necessarily the exact product handled). Could of course be used for various products. Width and depth of gripper can be adjusted. CE-marked but no operating manual available. Pneumatic diagram and spare parts list in German available. Two identical balancers available. Visible mobile foot-plate NOT included (used for our own internal transport and demo purposes).

MAKE CHIRON MODEL MILL 800 5 axis 5 axis machininng center (milling/turning from bar) Under power in our warehouse in Gussago BS Italy Mimu Machine tools CNC Fanuc 18iMBS (5 simoultaneous axis 1) X, Y, Z (mm) 800 – 500 - 550 Rapids (Highspeed) 60 m/min Swivelling head CNC controlled (B axis) +/- 100° Turning spindle Peiseler Milling spindle 12.000 giri / 140 Nm (v nota 2) Tools 65 Tool type HSK-A 63 DIN 69893 Tool-change time 1,5 sec (v nota 3) Table 1400x500 Max table load 1200 kgs 90fjsieew Coolant through spindle 70 bar (see note 4) CNC controlled clamping/rotating unit for 6th face machining (v. nota 5) Pressurised linear encoders Swarf conveyor Renishaw-ready Y.O.M. 2006 Weight 7500 kgs Turning package Max dia 65mm RPM: 15 / 4500 Max 42,5 KW / 90 Nm. Hydraulic clamping 800 Nm. Bar loader ILS-RBK- 10012 65 Diameters min/max 5/65 mm L= 600-1200 mm Highspeed (2) 60m/min. Spindl ...

Key data: 1400 mm, 1300 mm, 900 1/min

New price was 110,000 € (200,000 DM) Heavy Duty Lathe Lathe Est Ticino ET-CC 650 Manufacturer: Est Ticino Type: ET-CC 650 Year of construction: 1995 Main motor Siemens: 37kW Control: Siemens (drives), Fagor (display), Omron (PLC) Weight: 9.4t Specifications: Center height 655 mm Center width 1500 mm Maximum turning length 1300 mm Turning diameter over bed 1400 mm Turning diameter via face slide 1050 mm Turning diameter bridge 1400 mm Width of bridge 500 mm Spindle bore 160 mm Spindle speed 3 steps Spindle speed 3 – 900 rpm. Maximum torque 1100 KGM Bed width with double prism 600 mm Bed width with 3rd additional guide 820 mm Length of bed carriage guides 930 mm Width of face slide 420mm Path slide 800 mm Width of the rotatable upper slide 270 mm Travel of the rotating upper slide 400 mm Rapid traverses longitudinal 6 mt./min. Rapid traverses plan 6 mt. ...

MAKE CHIRON MODEL MILL 800 5 axis 5 axis machininng center (milling/turning from bar) Under power in our warehouse in Gussago BS Italy Mimu Machine tools CNC Fanuc 18iMBS (5 simoultaneous axis 1) X, Y, Z (mm) 800 – 500 - 550 Rapids (Highspeed) 60 m/min Swivelling head CNC controlled (B axis) +/- 100° Turning spindle Peiseler Milling spindle 12.000 giri / 140 Nm (v nota 2) Tools 65 Tool type HSK-A 63 DIN 69893 Tool-change time 1,5 sec (v nota 3) Table 1400x500 Max table load 1200 kgs 90fjsieew Coolant through spindle 70 bar (see note 4) CNC controlled clamping/rotating unit for 6th face machining (v. nota 5) Pressurised linear encoders Swarf conveyor Renishaw-ready Y.O.M. 2006 Weight 7500 kgs Turning package Max dia 65mm RPM: 15 / 4500 Max 42,5 KW / 90 Nm. Hydraulic clamping 800 Nm. Bar loader ILS-RBK- 10012 65 Diameters min/max 5/65 mm L= 600-1200 mm Highspeed (2) 60m/min. Spindl ...

Machine number: 2022-558 Adam Power Systems GmbH Thank you for your interest in our machines, please also check out our other offers Manufacturer :Caterpillar -Olympian Model-GEP400-2 Serial No: OLY00000K23000227 Power : /350KW/400KVA Engine: Caterpillar 6cylinder turbo diesel Year of construction :2007 Operating hours:19000h RPM : 1500 U/Min. Frequency : 50 Hz Voltage : 230/400 volts Complete with control Incl. diesel tank in the base frame Incl. new battery Power generator possesses: oil filter, water filter, fan belt. L:460/W:160/H:220/KG4800 Immediately ready for use Delivery available nationwide at an additional cost. Adam Power Systems GmbH Power generator of all kinds

AUTOMATIC SLOT MORTISER type BACCI MOD second hand machine machine with cast iron structure machine according to CE regulations: YES electronic oscillation speed spindles with inverter max. slots width mm. 120 + thickness max. slots thickness mm. 20 max slots depth mm.80 coller shank mm.16 table inclination 20° spindle motor power: Hp 3 oscillating motor power: Hp 1 spindle rotation rpm 9500 net weigth kgs. 700 volt. 380/50

Prati Vega Plus LF330 CNT Slitter / cutter / rewinder with inspection and label checking  Age: 2011  Unwinder  Rewinder  Slitting Unit  1 x Flexoprinting Unit - Varnish  UV Dryer  2 x Rotary Die-Cutting Unit  Sheeter  Perforation Unit  Cores: 25 mm, 40 mm, 45 mm, 50mm, 76 mm - wall thickness 3mm  Material width paper and film: min.: 150 mm / max.: 340 Print width: max. 310  Printing capacity: Punching only max. 200 m/min., printing max. 70 m/min.  max. roll Ø - down: 1000 mm / max. roll Ø - up: 400 mm Punching width: max. 320 mm  Slitter / cutter / rewinder with inspection and label checking.  Unwind with tension control and single edge guiding.  Pneumatic bars on the splice tables for changing rolls.  Color touch screen operation for all functions, programs and jobs.  For automatic non-stop rewinding (3-sp ...

FOUR SIDE PLANER machine type MAGIC RECTA 22 second hand machine n.04 spindles with tools (Yes) n.04 separate motors : 1° shaft : surface planer . motor power Hp 4 2° shaft : spindle moulder . motor power Hp 4 3° shaft : spindle moulder . motor power Hp 4 4° shaft : thickness planer . motor power Hp 5,5 entry table length mm. 2000 max. useful working width mm. 220 max. useful working height mm. 120 diameter of shaft mm. 40 volt. 380/50 net weight kgs. 1200

Gebhardt RLM 56-8090 centrifugal fan with direct drive Direct drive in accuracy class 1: The RLM series Gebhardt remains true to its concept and can thus set accents in the field of free-wheeling wheels This makes the free-running wheel an integral strategic component of Gebhardt's "direct-drive fans" fan range - Aerodynamically and acoustically optimized - Pressure increase of 2000 Pa achievable in the optimum range - Optimum motor utilization due to adapted impeller strength - Short overall length, compact module - Low wheel weight and resulting low load on the engine mounts - Precise volume flow measuring device standard Specifications RLM intravent RLM 56-8090-4D-28HA1A Centrifugal fan with direct drive 905 mm impeller diameter free-running wheel one-sided suction 6 Number of scoops 8.4 kgm² moment of inertia 74.0 kg Mass Impeller 1.20 kg/m³ ...

COLD JET DRY ICE BLASTING MACHINE COLD JET MODEL 2000 DRY ICE BLASTER GOOD CONDITION EXWORKS HAMBURG GERMANY VOLTS 230 AMPS 4 PHASE 1 FREQUENCY 50/60 FULL LOAD AMPS 4 MOTOR AMPS 2.5 HP 1 SHORT CIRCUIT INTERUPTING CAPACITY 300A MAX OPERATING PRESSURE 300 PSI / 20.7 BAR SHIPPING WEIGHT 315 LB / 143 KGS

Vertical machining center FAMUP MMV 160 CNC Fanuc CNC Fanuc 18i Table 2000x600 X 1600 Y 600 Z 600 Quick: Z 30 m / min X, Y 20 m / min Spindle 10000 rpm ISO 40 13.5kW max 30 tools high pressure Weight: 8200 kgs The machine is visible in our warehouse in Gussago BS. Mimu Machine Tools Gussago BS Italy The machining center is a machine tool equipped with numerical control capable of performing multiple mechanical operations with a single set-up on multiple surfaces of the same work piece. It is generally equipped with several axles of motion and a automatic tool exchange system and sometimes multiple pallets, X axis: 1600, Y axis: 600, Z axis: 600, CNC type: Fanuc 18i, Spindle speed RPM: 10000

Tank dimensions: 1000x600x375 mm Working table: 650x400 mm Permissible weight on the table: 1100 kgs Travels (X,Y,Z): 500x300x200 mm Electrode weight: 250 kgs Generator: S2000-60 Power: 9 Kw Equipped with: POLY-SPARK

THE MOST IMPORTANT FACTS AT A GLANCE:grinds 50 grams of wheat per minute, several times the amount on coarser settingsHopper capacity: 600 g (wheat)Grinder: corundum/ceramicHousing:Body: solid maple, rounded edgesFunnel, lid: solid mapleDrip tray made of wood and stainless steelTwo stable table clamps (clamping range min. 1.7 cm and max. 5.7 cm) for sufficient stabilityGrinding chamber: food-safe plastic (BPA-free)A ball-bearing crank that runs particularly smoothly Is volume at ? Fine?: approx. 60 dbWeight: 2.5 kgHeight / Width / Depth: 25.1 cm/ 14.0 cm/ 15.5 cmPerfect for a household size of 1-2 people3 years warranty for private use! You will receive a manufacturer's warranty from the date of purchase and an invoice with VAT. You can pick up on site and pay cash