kg used for sale

Engraving milling machine make DECKEL type G 1 LMachine -No: 76301Technical specifications:Work table: 500 x 200 mmgr. distance table to spindle: 300 mmCross movement of the table: 160 mmLongitudinal movement of the table: 300 mmTemplate table: 550 x 324 mmRotatable by: 360 °gr. Distance from pantograph arm to table: 20 mmlarge bore of the collet: 6.0 mmAdjustability of the spindle vertically fine / coarse: 1/3 mmSpindle speeds: 1900 - 15000 rpm.small / large Transmission ratio: 1 / 50Drive power: 0.2 kWDimensions: 1235 x 1075 x 1240 mmWeight approx: 250 kgWith- tiltable round tableused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools ...

Tire balancing machine make HAWEKA type BALCO 9460Fabr. -No: 0507.602.8007.16Technical specifications:max.wheel diameter: 950 mmmax.wheel width: 530 mmmax.wheel weight: 70 kgRim width: 76 - 510/3 - 20 mm / Measurement time:> 6 sec.Measurement speed:

Engraving milling machine make DECKEL type G 1 LMachine -No: 75488Technical specifications:Work table: 500 x 200 mmgr. distance table to spindle: 300 mmCross movement of the table: 160 mmLongitudinal movement of the table: 300 mmTemplate table: 550 x 324 mmRotatable by: 360 °gr. Distance from pantograph arm to table: 20 mmlarge bore of the collet: 6.0 mmAdjustability of the spindle vertically fine / coarse: 1/3 mmSpindle speeds: 1900 - 15000 rpm.small / large Transmission ratio: 1 / 50Drive power: 0.2 kWDimensions: 1235 x 1075 x 1240 mmWeight approx: 250 kgWith- round tableused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Tire balancing machine make HAWEKA type BALCO 9460Fabr. -No: 0507.602.8007.13Technical specifications:max.wheel diameter: 950 mmmax.wheel width: 530 mmmax.wheel weight: 70 kgRim width: 76 - 510/3 - 20 mm / Measurement time:> 6 sec.Measurement speed:

Engraving milling machine make DECKEL type G 1 UMachine -No: 71012Technical specifications:Work table: 500 x 200 mmgr. distance table to spindle: 300 mmCross movement of the table: 160 mmLongitudinal movement of the table: 300 mmTemplate table: 460 x 236 mmRotatable by: 360 °gr. Distance from pantograph arm to table: 20 mmlarge bore of the collet: 6.0 mmAdjustability of the spindle vertically fine / coarse: 1/3 mmSpindle speeds: 1900 - 15000 rpm.small / large Transmission ratio: 1 / 50Drive power: 0.2 kWDimensions: 1235 x 1075 x 1240 mmWeight approx: 225 kgWith- viceused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Force-measuring dynamic balancing machine make Dr. REUTLINGER type HK 12 LBMachine -No: 5.212.070 built in 1985Technical data:Workpiece weight: 1-100 kgDG 2 and 2.3 x 10 to the power of 6Center height: 340 mmhorizontal adjustment of the recording: 800 mmExternal dimensions approx.: 1800 x 1000 x 1450 mmwith- Measuring device K 2700- Computer MC 100 with screen- removable coverlittle used, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Mobile former make ECKOLD type MZ 20suitable for flanging, coning and collaringwith mobile hydraulic unit HA 510Year of construction 2014Technical specifications:Max. compression force: 50 kNProjection horizontal: 30 mmProjection vertical: 40 mmMaterial thickness when flanging St:2.0 - 4.0 mmMaterial thickness when flanging VA:2.0 - 3.0 mmApprox. weight: 9.0 kgused, in very good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

recision cutting machine manufactured by HASCO type A 190Masch. -No: 3143 Year of construction 1984Technical specifications:Workpiece diameter: 0.8 - 18 mmWorkpiece length up to: 600 mmCutting spindle speed: 11120/5400 rpm.Grinding spindle speed: 4450/2160 rpm.Size of the cutting disc: 100 x 1.0 x 20 mmSize of the grinding wheel: 100 x 50 x 20 mmDrive power: 0.44 / 0.65 kWWeight approx .: 210 kgExternal dimensions approx: 600 x 450 x 1200 mmWith- lower part- cooling deviceused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Engraving milling machine make KUHLMANN type GM-1-1Make -No: 19.1.0011 year of manufacture 1982Technical specifications:Pantograph setting: 1 to 100Working table: 500 x 200 mmTable length adjustment: 320 mmTable cross adjustment: 200 mmTable height adjustment: 280 mmTemplate table: 500 x 400 mm6 spindle speeds: 4200-20000 rpm.Drive power: 0.25 kWPower connection: 380V, 50HzDimensions L x W x H: 1200 x 1000 x 1400 mmWeight approx.: 250 kgMachine color: greenneededSpecial price, as in stockPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Engraving milling and burin grinding machine make SCRIPTA type AL 34Machine -No: 1598 built in 1998Technical specifications:Grinding wheel speed 4500 rpm.large collet diameter 18 mmContinuous spindle bore 14.5 mmMotor speed 2800 rpm.Longitudinal adjustment of the tool carrier 12 mmLateral displacement of the cutter holder 14 mmlarge adjustable Relief angle 45 °Grinding wheel adjustment 25 mmgr. vert. of the tool carrier on the shaft 105 mmDrive power 0.18 kWDimensions 630 x 560 x 320 mmWeight approx 39 kgwith- base cabinet- Collet set- Replacement grinding wheelsused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

External thread cutting and rolling machine make WAGNER type GU 4 - handTechnical specifications:Center height: 180 mmmetric thread M: M 8 - M 52Inch thread W: 3/8 - 2Pipe thread inch R: 1/4 - 3TR:10 - 44max. processing length: 600 mmFeed: by hand24 speeds: 16 - 355 rpm.Drive power: 4.0 kWOperating voltage: 380 VExternal dimensions L x W x H: 2350 x 950 x 1360 mmMachine weight approx.: 1300 kgWith- Thread cutting head with eccentric ring WDK- many tools- 3 axial rolling heads Fette FU 5 S, F5/U5, F6/U6used, in good and well-kept conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

One-sided centering machine make Gebr. HELLERTechnical specifications:Shaft diameter up to: 150 mm:Center height: 150 mmBed length: 800 mmDrive power motor: 1.1 kWExternal dimensions L x W x H: 1300 x 900 x 1200 mmWeight approx: 200 kgusedPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Mobile industrial vacuum cleaner make RINGLER type RI 331 - W2GMachine -No: 87210For vacuuming up general and carcinogenic dust, particularly dangerous carcinogenic hazardous substances as well as many fine andProblematic dusts.Technical specifications:Air flow rate 360 Nm3 / hDust class main filter MSpeed 1400 rpm.Connected load 2.0 kWPower connection 220 V.Dimensions 855 x 760 x 1340 mmCollection container 50 lWeight 94 kgused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Welding fume filter make ESTA type SRFP 10Machine -No: 55.103 / 35028 built in 1999Suction power V-nominal: 890 m³ / h.Extraction rate V-imm: 570 m³ / h.Filter area: 10 m²Drive power: 1.1 kWWeight approx: 102 kgWith- cleaning- CE markused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Precision Die Sinking Machine Fabr. MD PRONTO Dieburg Type 50.35Fabr. -No: 0-1.9.7, built in 12/1990Work table length x width: 650 x 350 mmMax. Workpiece dimensions Length x width x height: 900 x 550 x 400 mmTravel across X: 350 mmTravel length Y: 300 mmVertical travel Z: 180 + 200 mmMax. Travels of work table and machining head: 450 mmMachine weight approx. 1300 kgrequired footprint: 2700 x 1550 x 2450 mmExternal dimensions of the machine: 1280 x 1300 x 2100 mmTank size: 1100 x 550 x 400 mmTank volume: 240 l:With- Digital display- Depth shutdown- CO2 fire extinguishing system Gloria- Clamping system Hirschmann- separate power supplyas new, in very good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available ...

Welding fume extraction make RUWAC type SF 92Machine -No: SF940027Technical specifications:Extraction capacity approx.: 760 cbm / hDrive power: 4.0 kWWeight about: 102 kgusedPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

CNC EDM machine make INGERSOLL type IC 112Fabr. -No: 571085 Year 1985Table surface: 700 x 440 mmLoad capacity: 1000 kgTravel X: 450 mmTravel Y: 350 mmTravel distance Z: 350 mmWorking head: 205 x 205 mmHead load: 600 kgErosion load limit: 400 kgPinole diameter: 120 mmclear width head - table: 300 - 650 mmDrive: servo-hydraulic.Work container size: 960 x 650 x 400 mmCapacity: 230 lFeed rate in 3 axes: 600 mm / minHydraulic capacity: 40 lOperating current: 35 ASupply voltage: 380 V, 50 HzConnected load: 5 kVADimensions L x W x H: 2885 x 2000 x 1950 mmWeight approx. 2200 kgVolume of flushing pump: 25 l / minDelivery volume of filling pump: 130 l / minTotal amount of dielectric: 400 lFilter area: 4 m / 2With- Control type M 60 D Rotron 3 T Heidenhain ME 102used, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.T ...

CNC EDM machine Fabr. AGIE type Agietron 200 CSeries 03, device 04, list of devices 356804.5 built in 1987Travel X: 500 mmTravel Y: 350 mmTravel distance Z: 500 mmSupport surface: 800 x 630 mmMax. Workpiece dimensions: 1000 x 700 x 320 mmInner container dimensions: 1070 x 740 x 420 mmWorkpiece weight approx. 1200 kgMax. Weight of the electrode: 400 kgDistance table - quill: 180/680 mmPosition deviation (PA): 0.005 mmaverage position spread (PS): 0.003 mmmean inverse span (u): 0.002 mmResolution: 0.001 mmNumber of flushing connections: 10manual flushing: 1/20 l / minautomatic dosing spray: 8 / 3-800 ml / minControl mode: Multi-taskingSimultaneously controllable axis: 4Simultaneously controllable rotative and linear axes: C with X, Y, ZStorage Capacity: 3.5 , MS-DOS, 720KBScreen: color 14 Interface: RS 232 / CV 24Rated current: 60 ARemoval rate: 450/590 mm3 / minNumber of channels: 1Agiepu ...

Welding fume extraction make KEMPER type 91510Manufacture -No: 923610Technical specifications:Flow rate: 1200 cbm/hstat. Pressure: 1450 PaTotal power requirement: 0.75 kWelectrical connection: 380 VWeight approx.: 60 kgSuction nozzle diameter :150 mmExternal dimensions with suction arm approx.: 650 x 700 x 1200 mmwith- 1 extraction arm- mobileused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Die sinking machine make AGIETRON type EMS 3.30Year of construction 1979Table size: 630 x 500 mmgr. workpiece height: 340 mmAdjustment = X: 420 mmAdjustment = Y: 320 mmgr. workpiece weight: 8000 NReading option: 0.01 mmgr. distance of table quill: 700 mmWork container: 945 x 650 x 465 mmFeed travel = Z: 400 mmRapid traverse and servo speed: 600 mm / minOutreach: 500 mmAgiepuls generator: Type 60 L / DDLRated current: 60 APulse voltage: 100/150/270 V.Dielectric aggregate: Type DA 220Capacity: 450 mmWeight: 1540 kgvery little used, in very good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Die sinking machine Fabr. AEG-Elotherm type Elbomat 222 WMash. -No: 224.4009with generator EP 60 C 2145172 and filter F 11 VYear of construction 1980Adjustment X: 300 mmAdjustment Y: 200 mmReading accuracy: 0.01 mmTable load max .: 400 kgTable dimensions: 580 x 310 mmTank / processing room: 700 x 450 x 265 mmMax. Fluid level above workpiece carrier: 250 mmTank volume: 70 lWorking head angle: 200 mmHead support: 200 kpMax. Distance between working head and table: 480 mmDepth gauge: 50 mmDepth-of-cut accuracy: + - 0.02 mmExternal dimensions of the machine: 1250 x 1225 x 2150 mmWeight approx.: 1.3 tWith- mot. Coarse adjustment of the working head / W axis- Eloplus Generaotr type EP 60 C- Heidenhain positioning controller TNC 1213 R Orbicut midi tromes- Adapter slot- H 400 system- Filter F 11Vused, in very good conditionPrice on request.Delivery: ex warehouse or location free loading truck.P ...

CNC EDM machine make INGERSOLL type IC 263Machine -No: 571304 built in 1988Table surface: 1000 x 525 mmMax. Workpiece nominal load: 2500 kgTravel X: 700 mmTravel Y: 400 mmQuill stroke Z: 400 mmmin / max. Distance table - quill: 350/750 mmTool carrier dimensions: 350 x 310 mmMeasurement resolution: 0.001 mmPlanetary radius mx.:5 mmPinole diameter: 220 mmMax. Head load: 1500 kgRecommended erosion load limit: 1000 kgFeed rate max .: 600 mm / minDimensions of the working container: 1300 x 750 x 550 mmCapacity: 535 lTotal Dilektrium: 750 lVolume of flushing pump: 25 l / minDelivery volume of filling pump: 200 l / minConnected load: 9.5 kVAConnection voltage: 380 V / 3 Ph / 50 HzOutside dimensions of the generator: 1950 x 2260 x 2900 mmWith- Generator M 60 DC 5 kVA- electrical meter f.d. Eroding the quill- Dialog DC-CNC planetary control PLT TVxa0xa0xa0(Dialog Color Graphic)- sep. Supply unit  ...

CNC spark erosion machine make AGIE type AGIETRON 100Device list 357914.1, series 015, device 005Technical specifications:Table size: 580 x 450 mmwith 3 T-slots 10 mmX axis: 350 mmY axis: 250 mmWeight of the erosion machine: 2275 kgWith- Agiematic T control, device list 813834.9, series 008, device 008, 290 kg 1.25 kVA- FSK, device list 813864.6, series 008, device 009, 65 kg- ATK 35, device list 144170.8, series 016, device 009, 220 kg- Generator Agiepuls 60M, device list 814104.6, series 008, device 008, 305 kg 3.4 kVA- Dielectric unit DA 100, device list 369964.2, series 020, device 009, 460 kg, 4.2 kVA + PD + GEN- tool changer- Cooling unit make HIROSS ICE 005, 230/1/50 serial no. 3293540001, 110 kgused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We  ...

Electrically heated tempering furnace make HERAEUS GmbH Hanau type HM 13Machine -No: 28024, wiring diagram no. 1641Max. Nominal oven temperature: 1150 °Internal dimensions W x D x H: 400 x 650 x 250 mmRated power: 20 kWExternal dimensions: 1500 x 1300 x 1700 mmWeight: 940 kgusedPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Zinc melting tank make RAUCH type ZSB 453-RMasch. -No: 1351 built in 1997Technical specifications:Max. Melt content: 400 kgNet capacity: 350 kgMax. Melting temperature: 440 degreeBlank value at 420 degree: 0.8 kWExternal dimensions approx: 635 x 500 x 760 mmWeight approx. 230 kgPower consumptionWith- Control cabinet: 3.0 kW- for transporting and / or keeping warmxa0xa0 Die casting alloys with max. 5.0% Al- Melting of frozen material possibleused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

2 convection ovens make HERAEUS type UT 5050 EKYear of construction 1981Maximum temperature: 300 ° CInside dimensions W x H x D: 435 x 400 x 480 mmVolume: 105 lelec. Connection: 220 V, 2 kWExternal dimensions W x D x H: 800 x 650 x 670 mmWeight approx .: 65 kgsecond handPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offerand are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Electric chamber furnace with silicon rod, make ELIOG VEB Römhild, type KO 14Fabr. -No: 85/11010012 built in 1985Technical specifications:Furnace interior dimensions H x W x D: 100 x 150 x 250 mmNominal temperature: 1350 °Nominal power: 4.0 kWHeating-up time 20 ° to 1350 °: 4.92 hours.Cooling time 1350 ° to 675 °: 2.25 hoursWeight of the oven approx: 82 kgExternal dimensions H x W x L: 440 x 475 x 595 mmWith- Thermoelectric transmitter and limit indicator- Control system L x W x H 600 x 460 x 700 mmusedPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Electric hardening furnace Fabr. LEADING type KMO / E 8Machine -No: 301077/89 Year 1989Max. Temperature: 1.200 °Internal dimensions W x H x D: 500 x 315 x 800 mmDrive value: 25.5 kWExternal dimensions L x W x H: 1700 x 1500 x 2100 mmWeight approx: 2000 kgWith- automatic pneumatic doorused, in very good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Gas-heated annealing and hardening furnace make SCHNEIDER GmbH Witten type 6 KMachine -No: 31 built in 2002Technical specifications:Chamber size W x D: 1200 x 900 mmin the rear part of the chamber step downwards: depth 500 x height 400 mmOpening W x H: 1200 x 470 mmmax.temperature: 1300 °Connected load: 300 kWHeating medium: natural gasExternal dimensions approx. W x D x H: 2200 x 2600 x 2650 mmWeight: 5850 kgWith- MEILI hand winch for opening the oven door- Attention without switch and control cabinet!usedPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Air conditioner make HERAEUS / VÖTSCH type VEM 03/2240 LFabr. -No: 29515 built in 1988Temperature range from: -30 ° - + 100 ° CDimensions interior W x D x H: 1480 x 780 x 2000 mmHeat compensation + 20 ° C approx.: 1500 W+ 10 ° C: 1300 W+/- 0 ° C: 1100 W-10 ° C: 900 W-20 ° C: 600 WRefrigerant: R 502Refrigerant pressure: 1.6 barpermissible operating pressure: 23 barTemperature deviations: +/- 10 ° CConnected load: 380 V, 5.5 AProtection class: IP 20Weight approx .:510 kgWeight of control cabinet approx .: 310 kgDimensions oven: 2200 x 1000 x 2300 mmDimensions control cabinet: 800 x 600 x 2200 mmWith- Test room made of stainless steel- Pipe penetration 50 mm Drm.- Pipe penetration 80 mm Drm.- Door lockable, 2 leaves, door size 1430 x 2000 mm- Observation window 500 x 1000 mm- Separate electrical and control cabinetvery little used, in very good conditionPrice on request.Delivery: e ...

Warming cabinet make HERAEUS type T 6030Best. -No: 51000066 Machine -No: 8903337, built in 1989Max. Temperature: 300 °Internal dimensions: 370 x 352 x 231 mmInterior volume: 30 lHeating time of 25 ° C on300 ° C: 75 min.150 ° C: 30 min.70 ° C: 15 min.Curb weight: 40 kgOutside dimensions approx: 610 x 552 x 552 mmused, ready for operationPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Hydraulic double acting pipe pulling and reducing machine Fabr. OWN CONSTRUCTIONFor connection of outer and inner tubeConsisting of:1.) Vertical hydraulic double acting pressxa0xa0xa0xa0xa0 Table size: 565 x 450 mmxa0xa0xa0xa0xa0 Installation height: 800 mmxa0xa0xa0xa0xa0 Distance between the stands: 700 mmxa0xa0xa0xa0xa0 lateral. Passage: 285 x 200 mmxa0xa0xa0xa0xa0 Piston diameter: 90 mmxa0xa0xa0xa0xa0 External dimensions: 1400 x 650 x 2100 mmwith separate hydraulics2.) Horizontal hydraulic double-acting pressxa0xa0xa0xa0xa0 Power: 450 atmxa0xa0xa0xa0xa0 Installation height: 800 mmxa0xa0xa0xa0xa0 Cylinder diameter: 100 mmxa0xa0xa0xa0xa0 External dimensions: 2400 x 1500 x 1200/3000 mmwith attached crane jib and STEEL chain hoist 600 kg3.) large lot of tools (about 30 pieces)xa0xa0xa0xa0 from 21.3 to 407 mmxa0xa0xa0xa0xa0 with intermediate sizes of 50, 57, 60, 60.3 mmusedPrice on request ...

Zinc melting furnace RAUCH ZSO 450 BMasch. -No: 70112/836597 Year of construction 1997Technical specifications:Max. Temperature: 450 degreeHeating output: 96 kWWeight approx: 1300 kgWith- 1 control cabinet- ZFB conveyor belt including drop chuteusedPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Hydraulic Single Planing Machine Fabr. WALDRICH COBURG Type 2E 1515Com. -No: 2110108 built in 1966combined gantry and milling machine with removable milling attachmentPlaner length: 2000 mmPlaning width: 900 mmPlaning height: 750 mmTable surface: 2000 x 650 mmpermissible workpiece weight: 1550 kgmilling head11 spindle speeds: 112 - 1120 rpmPower: 1.5 kWSpeed: 960 rpm.Tool holder: MK 3Max. Cutter diameter: 63 mmAxial adjustment of the milling head: 130 mmVertical adjustment: 170 mmAdjustment of the milling head on the boom: 630 mmtable driveMotor power of the feed pump: 3 kWFeed rates stepless Flow: 10 - 4200 mm / minReturn: 10 - 2800 mm / minCreep speed: 5 mm / minLongitudinal adjustment: 2000 mmWith- milling attachment- Sanding attachment- Planing steel holder- swiveling control panel- rapid traverse- mot. transom height adjustment- Separate control cabinet- hydr. speed adjustmentused,  ...

Bar loader make Fabr. IEMCA type AS 325/32Machine -No: 87041309 Year 1987Rod sizes from: 3-25 mmBar length max .: 3210 mmMagazine capacity (eg 30 x 10 mm): 300 mmFeed rate: 200-600 mm / sec.Drive power: 1.0 kWWeight approx: 530 kgOutside dimensions approx: 4470 x 460 x 1500 mmused, in very good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Power generator make BOSCH type BWFA 4Mash. -No: 7790406002/314206Rated power: 220 V / 4 / 3.2 kWPower factor cosphi: 0.8Rated speed: 3000 rpm.Engine power: 5.7 hp / 4.2 kWDisplacement: 320 cm3Fuel: regular gasolineFuel consumption: 2.5 l / hTank capacity: 3.8 lRunning time m. one tank full: 1.6 h / full loadEngine type: Briggs + Stratton - 4-stroke: Single cylinder, fan cooledStarting device: CableVolume: 79 dbWeight: 70 kgExternal dimensions: 850 x 528 x 555 mmWith- mobile undercarriageusedPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Machine vice mechanical / hydraulic make RÖHM type RBFabr. -No: ID158413 / PTechnical specifications:Jaw width: 160 mmJaw height: 49.6 mmTotal length: 817 mmTotal height: 133 mmTotal width: 240 mmPunching force: 50 kNWeight approx: 60 kgWith- Clamping range 310 mm- mechanical drive with hand crank- hydraulic power transmission via hydraulic unitused, in very good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Cast T-slot platenTechnical specifications:Dimensions approx. L x W x H: 2010 x 1080 x 220 mmThickness: 35 mmRibbing: 185 mmNumber of T-slots: 3Dimensions of the T-slots: 60/36 mmGroove distance: 275 mmNumber of mounting holes: 8Size of the mounting holes: 155 mmWeight approx: 1140 kgused, in very good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Pressure joining pliers make ECKOLD type MZD 25/3Masch. -No: 794980with mobile hydraulic unit type HA 550Machine -No: 286/525Technical specifications:Pressure force: 30 kNOperating pressure: 500 barmax.sheet thickness: 3.0 mmmax.sheet thickness AL: 3.0 mmDesigned for DF variant: S-DFHydraulic hose length: 6 mWeight approx: 4.5 kgPower of the unit: 500 barExternal dimensions approx .: 600 x 500 x 700 mmwith- mobile- Pressure joining pliers type MZD 35 machine -No: 457/287- many knives for jointing plierslittle used, in very good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Semi-automatic screen printing machine manufactured by Borghoff & WILK type Mini Printer Mod II, year 1988Max. Print format: 400 x 600 mmMax. Die cast thickness: 20 mmPrinting plate dimension: 550 x 700 mmVacuum area: 430 x 630 mmMax. Frame dimensions: 640 x 820 mmminute Internal frame dimension: 400 x 200 mmmax.clock: 12000 p / hDrive power: 0.75 hpVacuum motor: 0.75 hpPower connection: 380 V 50 HzExternal dimensions: 1040 x 1260 x 1330 mmWeight: 300 kgWith- Drying cart- Cast vacuum base plate with fine adjustment- aut. Sincroprint device for printing speed- adjustable squeegee angle- single and continuous cycleused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regar ...

CNC-controlled wobble riveting machine make BODMER KÜSNACHT type BK 160Masch. -No: FM 1603 built in 1997 with only 1069 operating hours Technical specifications:Rivet diameter max. 16 mmProjection 180 mmStroke 130 mmTable size 1000 x 600 mmCompressed air requirement 6.2 barDrive power 1.1 kWDimensions approx 815 x 700 x 1940 mm:Weight approy 404 kgWith- adjustable table- 2-hand release- protective coversecond hand - not ready for use (control)! selling as spare parts dispenser expressly ! EUR 3.900,--Price on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Pre-assembly device make VOSS type P 70Best. -No: 991070 Machine -No: 170 Year Nov. 1989for pre-assembly of cutting rings on pipes from AD 6 - 42 mmand for mechanical pre-assembly of the flared cone and collar ringsPipe size to be machined: 6 - 42 mmMax. Pressure capacity up to: 250 barDrive power: 0.3 kWPower connection: 220 V, 50 HzDimensions L x W x H: 500 x 550 x 210 mmWeight approx: 65 kgWith- Underframe- various accessoriesused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Hand-held mot. Sweeper make HAKO type HAMSTER 800 VMachine -No: 6210018123 Year 1990Sweeping width: 800 mmWeight approx.: 180 kgOutside dimensions approx. 1200 x 1700 x 1200 mmWith- Travel drive- 4 stroke Kawasaki engine- side brushused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Pneumatic riveting machine make VTS type 120-4 / 100.10Machine -No: 120.457.08 built in 2008Technical specifications:Max. Rivet diameter: 4.0 mmPressure force: 8 kN at 4 bar / 20 kN at 10 barAir consumption: 0.5 l / stroke at 4 barCycle time: 1.0 sec.Working height: 900 mmDimensions approx.: 500 x 500 x 1500 mmWeight approx: 120 kgWith- Festo pneumatic control- vibratory conveyor- Punch and pliers feed- foot switch- UVV (finger protection)used, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Personal time attendance make Z + M type Argus J 30 PlusFabr. -No: 8383Clock: digital (time, date, day of the week)Accuracy: 15 sec./monthPushbutton: Inkjet blackBackup: 3 months in case of power failureWeight approx: 4.5 kgOutside dimensions approx: 160 x 205 x 128 mmWith- Scannerused, ready for operationPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Thread rolling machine make FETTE type R 40Fabr. -No: 818 built in 1980Technical specifications:Metric thread rolling range: 12 - 39 mmThread rolling range inch: 7/16 - 1 1/2 large rollable thread length: 500 mmSpindle passage: 46 mm6 spindle speeds: 250 - 2000 rpm.Gr. clamping diameter of the vice: 70 mmClamping stroke: 40 mmInfinitely variable feed rate: 600 - 3500 mm / minRapid forward / rapid return: 9 m / minTotal power requirement: 18 kWDimensions L x W x H: 1830 x 900 x 1145 mmWeight approx: 1000 kgWith- Hydraulic unit for clamping and feeding- cooling device- separate control cabinet- Thread rolling head FETTE type FU 34/1used, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your  ...

Cutting Mill Fabr. TRIA Type 32/20 JMYear 2005Technical specifications:Milling chamber opening: 320 x 200 mmNumber of stator / rotor blades: 3/2Rotor diameter: 180 mmStandard sieve: 5.0 mmProduction capacity approx: 40 60 kg / hPower 400V: 3.0 kWRotor speed approx: 280 1 / min:Weight: 320 kgused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Thread cutting machine make REMS type Tornado 2000Fabr. -No: 34022697for the efficient production of pipe and bolt threads, thread cutting, cutting off, deburring, nipple cutting in the workshop and on the construction siteTechnical specifications:Pipe thread size: 3/8 - 2 Speed: 60 rpm.Power connection: 220 V, 50 HzDrive power: 1200 WExternal dimensions L x W x H (without basement): 730 x 435 x 280 mmWeight of the machine without accessories: 31 kgWith- foot switch- thread cutting head- pipe cutter- pipe support- deburrerused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

CNC press brake make DARLEY type EHP 110 31/25Year of construction 1990Press force: 110 tWorking length: 3100 mmPassage between the uprights: 2550 mmStroke length: 150 mmLowering speed: 100 mm / sec.Max. Press speed: 8.0 mm / sec.Retraction speed: 65 mm / sec.Drive power: 7.5 kWWeight approx: 8700 kgOutside dimensions approx: 3220 x 1290 x 2440 mmWith- CNC control Delem DA 22- Bombing device- universal die- Split goat foot tool- Footswitchused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Cutting Mill Fabr. TRIA Type 32/20 JMMachine -No: 83304602M Year 2005Technical specifications:Milling chamber opening: 320 x 200 mmNumber of stator / rotor blades: 3/2Rotor diameter: 180 mmStandard sieve: 5.0 mmProduction capacity approx: 40 60 kg / hPower 400V: 3.0 kWRotor speed approx: 280 1 / minWeight approx: 320 kgused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools