keppler used for sale

Kepco JQE 100-5 M Power Supply Power Supply Laboratory Power Supply Power Supply Auction-ID: A7-45427-95

Manufacturer: FRAVIZEL Model: Kepler MFR55 Year of Manufacture: 2023 Commissioned: 2023 Type of Machine : wire saw systems for block mining in a quarry. Condition: The machine is relatively new and have seen little use. Find more here - / Contact us at -

The all-electric servo bending machine is one of the products with independent intellectual property rights developed by our company. Special high-load screw and guide rail structure, imported bearing installation, high load-bearing capacity, high positioning accuracy, long life, machine tool rigidity, precision retention, and reliability are close to perfection. By introducing advanced design concepts and scientific design methods, the shortcomings that traditional designs cannot avoid have been solved. This bending machine is fast and simple to program, can realize concurrent linkage of multiple axes, fast feed positioning, and significantly improves the efficiency, accuracy and consistency of bending, which is far superior to traditional hydraulic bending machines, and does not require the use of hydraulic oil, is environmentally friendly and pollution-free. Compared with traditional ...

Control panel: Siemens SIMATIC HMI, connected load: 80kW, weight: 1.85t, operating hours: approx. 4500h, with Kreyenborg feed hopper, year of manufacture: 2017, and Trendelkamp screen changer. Documentation is complete, on-site inspection is possible.

SALE ONLY COMPLETELY! NO RETAIL SALE! ALSO APPLIES TO WMF MACHINES. THEREFORE SAVE YOURSELF THE CALLS, HOW MUCH DO YOU WANT ONLY FOR THE WMF ETC... Coffee machine - Espresso machines 2x WMF Cafemat 5x Wmf Presto 2x WMF 1000S 11x Thermoplan Tiger (1x WMF 1000 S I kept to myself and is now in my office) in total there are 20 coffee machines A few machines are defective. or a few parts are missing. A box full of parts for the WMF is available. The machines are sold without warranty and guarantee, in net.

Siemens Advia Centaur XP Analysis System With Siemens Healthineers services and maintenance until the last minute 02/2022 Modern AE immunoassay technology Meet clinical requirements with acridinium ester (AE) technology, which ensures the necessary flexibility and sensitivity for new and innovative assays. Comprehensive diagnostic clarification of various clinical pictures thanks to a test menu with over 70 different assays. Simplified inventory management and lower costs by using the same ready-to-use reagents on all ADVIA Centaur analysis systems. Simplified operation, continuous operation All samples, reagents and consumables can be loaded and unloaded during operation. Easier training and operation thanks to an intuitive, icon-based user interface. Fewer operator intervention because daily maintenance is low and the system does not need to be cleaned monthly or booted  ...

Sartorius Stedim biotech BioWelder 16370 The BioWelder works with a thermal welding cycle that does not require laminar flow. In this welding process, the blade is kept sterile and endotoxin-free throughout the process. The inserted hoses are cut with a knife and then fused together by the device. The cycle process is fully automated and is only released after a full cycle. Various programmable holders make it possible to weld thermoplastic hoses of the same type (e.g. C-Flex, Sanipure, Pharmed) with diameters from 6.4 mm (1/4") to 19.0 mm (3/4"). Characteristics: Fully automatic operation Welds thermoplastic tubes up to 3/4 inch outer diameter Pre-installed settings for C-Flex, Raumedic FluiSoftTM, AdvantaPure, AdvantaFlex, Pharmed and Sanipure hoses True Thermal Weld offers exceptional strength Aseptic connection without laminar flow hood Data output by a print ...

Key data: 2745 KW, 3400 kVA, 6300 V

CHARACTERISTICS OF GENSET ✓ Jenbacher J616 G.S-NL (GS-J11 engine) | YOM 2016 | Power 2,745 kWe | Natural gas Generator Leroy Somer 3,400 kVA | 6,300 V | 50 Hz | cosφ= 0.8 AVAILABLE EQUIPMENT ✓ Genset with auxiliaries included Diane XT control panel and synchronizer ✓ Generator high voltage switchgear 6.3 kV ✓ Step-up transformer EFACEC 6.3/15 kV 3,500 kVA (YOM 2017) | Auxiliaries transformer ✓ Lub oil system, gas valves, crane, radiators HT circuit, cooling towers LT circuit, heat exchangers, control valves, water and oil pipes, exhaust silencer. ✓ Documentation related to the installation. CURRENT STATUS OF PLANT ✓ Plant stopped in 2023 due to commercial reasons. ✓ Genset is kept hot and crankshaft it is turned periodically. ✓ Genset is ready to run. ✓ Genset was always maintained under LTSA by Jenbacher ✓ Genset history: No failure ...

The frames and skin are in a good, very good condition. Parts with new finply. 40x Framax 1,35x2,70m 22x Framax 0,90x2,70m 8x Framax 0,60x2,70m 8x Framax 0,45x2,70m 8x Framax 0,30x2,70m 10x Framax 0,90x2,70m Uni 4x Framax Insidecorner 2,70m 4x Framax Outside corner2,70, 312x Framax RU Clamp 20x Framax Universal fixing bolt10-16cm 24x Framax wedge clamp 12x Framax Universal walling 0,90m 12x Framax Universal walling 1,50m 20x Framax bracket 90 5x Panel strut 340 2x Framax lifting hook 210x tie rod 1,00m 420x super plate 15 2x Doka Box 1,20x0,80m Framed formwork Framax Xlife The high-performing steel-framed formwork for crane-assisted forming of large areas Framax Xlife is the framed formwork system that uses only a very few different panel formats to achieve a consistent 15 cm increment-grid, no matter whether the panels are stood upright or on their sides. All t ...

J Kugler filling line, that has been dismantled about half a year ago from the production it has been running in. The machine is now dismantled and in our warehouse safely storaged. With this you get a complete filling line with a filling machine, a lid applicator, a capper and a label machine. The filling line has been running at Novartis in their German department, so all the machines are very well kept and serviced. Novartis have been running 1000 ml products with a lid”, a cap on the top and a label on the side. They have been running 20 products per minute = 1.200 products per hour. The filling line is from 1990 and has been running at Novartis from when it was new. The filling line is complete with a rotary infeed table, 1 headed piston filler with lotion lube pump, lid applicator, cap applicator, label machine and an End of Line Production Systech Display Monitor” to co ...

Key data: 8000 KW, 7425 kVA, 11000 V

CHARACTERISTICS OF GENSET ✓ Wärtsila 16V32SG | YOM 2015 | Real power of the motor is 8.000 kW (in plate) | Effective design power was reduced to 7.400 kW in order to get adapted to legal power stated at permits (there was a gas turbine in this plant before installing this Wärtsilä genset) | Fuel: Natural gas ✓ Generator ABB 7,425 kVA | 11,000 V | 50 Hz | Cos = 0.98 AVAILABLE EQUIPMENT ✓ Genset with auxiliaries included control panel and synchronizer ✓ Generators high voltage switchgear 11 kV, protections cabinet ✓ Lub oil system, gas valves, crane, radiators HT circuit, cooling towers LT circuit, heat exchangers, control valves, water and oil pipes, exhaust silencer. ✓ Main step-up transformer SIEMENS 8000 kVA | 11 / 15 kV | YOM 2015 ✓ Auxiliaries transformer EFACEC 400 kVA | 0.4 / 15 kV | YOM 2009 ✓ Heat recovery boiler for steam generation | Y ...

Packaging machine Beck Fitpacker Junior FJ 1040 U - Used equipment built in 1995 - small repairs necessary The Fitpacker Junior has a high packing performance and can process products of different lengths in disorder. A programmable logic controller is located at the top of the control cabinet and is easy to handle via a logical user interface. The packer also has a feeding system, which is especially suitable for line operation. Machine changeover times are kept short by a digital operating concept and an adjustable shape shoulder. The control cabinet can be opened and swivelled so that optimal access is guaranteed in the event of maintenance and downtimes are reduced. The film roll holder is mounted at an ergonomically reasonable working height. Working speed: Actual production speed and effective net output depend on format, Type and composition of products and can ...

Natural Gas Power Plant 58.3 MW / 50 Hz Wartsila 6 × 20V34SG with Auxiliaries This power plant was originally built by Wärtsilä in 2011 as a turnkey project without heat recovery boilers. Later, the owner added 4 × 3.7 MW / 18 bar exhaust gas steam boilers with auxiliaries, which are available as optional items. The plant was in operation until 2017, accumulating between 22,000 and 24,000 operating hours per engine. All scheduled services were performed by Wärtsilä Service, including the 16,000-hour and 24,000-hour services, completed just prior to dismantling in 2021. This ensures that the gensets are fully maintained and do not require servicing before re-commissioning. After shutdown, all equipment—including cables, pipes, and OEM modules—was professionally dismantled, tested, packed for transportation, and placed in storage. Control cabinets are stored in a heated  ...

Citrocasa 8000 SB-ATS orange juicer Comes from an insolvent REWE store Built in 2018, but was not in use for the last two years until the eviction The machine makes a very neat impression The protective cover on the left side has a nose broken off. This does not affect the function, the cover can be replaced. There is still cleaning and disinfecting agent in the base cabinet with which the machine can be kept clean and germ-free. It starts up when the tap is actuated, but can also be switched to continuous operation.

Natural Gas Power Plant 58.3 MW / 50 Hz Wartsila 6 × 20V34SG with Auxiliaries This power plant was originally built by Wärtsilä in 2011 as a turnkey project without heat recovery boilers. Later, the owner added 4 × 3.7 MW / 18 bar exhaust gas steam boilers with auxiliaries, which are available as optional items. The plant was in operation until 2017, accumulating approx 21000 operating hours per engine. All scheduled services were performed by Wärtsilä Service, including the 16,000-hour and 24,000-hour services, completed just prior to dismantling in 2021. This ensures that the gensets are fully maintained and do not require servicing before re-commissioning. After shutdown, all equipment—including cables, pipes, and OEM modules—was professionally dismantled, tested, packed for transportation, and placed in storage. Control cabinets are stored in a heated warehouse, wh ...

Key data: 210 , 400

Tedom TB210 G5V TW 86 Complete Containerised Biogas Unit. Make and model: Tedom TB210 G5V TW 86 Capacity: 210kW Hours: 51 Year: 2015 Fuel: Biogas V: 400 Hz: 50 Scope of supply: Complete Containerised Biogas Unit Including: Engine, Alternator (Leroy Somer), Control Panel (ComAp IntelVision8), Base Frame, Gas line, 2 x Radiators, 2 x Air Intake, Silencer, Piping, Biogas Treatment and Condensare discharge system, Carbon filter. All documentation and diagrams. Inspection notes: Liners in good condition. Engine turned over easily. Has been kept heated. Available for sale from Gas Engine Exchange. Please check our complete range of equipment at gasengineexchange.com.

Capability characteristics: • High-quality tray destacker as a carousel with 12 stations • Material: stainless steel / plastic / plexiglass • Fast format change by replacing the denester cassette • Automatic lines are kept in continuous operation for longer, unnecessary downtime is minimized • Higher effective production output • Optimal personnel deployment: operating personnel can take care of other tasks Inclusive: Trolley for two denester cassettes Destacker cassettes: for trays approx. 265x180 mm and approx. 220 x 180 mm (adjustable) Destacker size: 1000 mm x 1500 mm x 1900 mm (L/W/H) Scale size: 780 mm x 800 mm x 1050 mm Burgmetaal / Technotron mobile denester with carrousel, 12 stations, maximum trayx dimensions: 265mm x 180mm, total dimensions: 1000 mm x 1500 mm x 1900 mm, including tool trolley, dimensions trolley: 780 mm x 800 mm x 1050 mm

Cutting machine DSN 700 from the manufacturer DÖINGHAUS Voltage: 3 x 400 V, 50 Hz Power: 2 kW Machine dimensions (LxWxH): 160 x 140 x 170 cm Weight: 550 kg Condition: well-kept, in working order Availability: as of now

BD FACS Aria Fusion Systems BD FACSAriaTM Fusion Measuring Stand, Type 2 Laser 5-3 with the equipment: Safety workbench 1 BD FACSAriaTM workstation incl. BD FACSDivaTM software 1 Norton GhostTM license for data backup 1 USBII HardDisk 500 GB 1 19" LCD flat panel display 2 Xerox 8570N Colorcube Solid Ink Printer 1 BD FACSAriaTM III Basic System (IC No. 53216) o Maximum optical sensitivity due to: - Gel-coupled cuvette optics. - Maximum light yield due to complete reflection optics with patented octagon detection blocks - Simplest handling due to advanced technology:  completely alignment-free optics on excitation and emission side  Easy Nozzle change with integrated O-rings without influence on optical alignment (each 1 Nozzle 70 μm, 85 μm, 100 μm included)  Exact fully automatic adjustment of the drop delay with live control by BD AccuDropTM  Automatic s ...

• Year 2022 (like new) • Offering up to 800 amps of gouging power with 50 % dutycycle, • the KempGouge ARC 800 is a heavy duty power source package that is designed for all types of carbon arc gouging. • KempGouge can be used with the majority of metals, such as steel, stainless steel, cast iron, nickel, copper, magnesium, andaluminum. • KempGouge lets you open roots or faulty welds and cracks, prepare welding grooves, cut metals, make holes and cleancasts, and remove excess metal. • The characteristics curve controlling the KempGouge’s operating parameters has been designed specifically for carbon arc gouging, so its gouging properties are optimal. • The noise levels of KempGouge have also been kept very low. • FAST AND EFFECTIVE Way to remove defects, backgouge the root, cut metal and pierce holes • EASY WAY To move the equipment and adjust t ...

X5 pipeline for pumped food inspection. X-ray inspection Year of manufacture 2019 the device has exactly 12 operating hours and is as good as new The X5 pipeline is perfect for inspection of a wide range of pumped and free flowing applications such as poultry, meat, slurries and sauces. The system, which is available with product pipes of 2.5, 3 and 4”, is capable of offering excellent detection of a wide range of contaminants including all metals, bone, glass, stone and dense plastics. The devices are in excellent condition and were replaced due to software changes. The maintenance was always kept, the devices are 10 years old, operating instructions see attachment. Find more here - / Contact us at -

NJP-1200C automatic capsule filling machine was built in 2022 in China by Guangdong Rich Packing Machinery Co., Ltd. Machine in very good condition, kept in a temperature and humidity controlled room. All moving parts were systematically lubricated according to the manufacturer’s recommendations. The NJP-1200C capsule filling machine is used in the pharmaceutical industry for mass production of medical products, i.e. drugs, supplements, etc. It enables fully automatic filling of hard capsules of size 00 and 0 with products in the form of powder or small granules. In one working cycle, empty capsules are fed, sorted, filled and sealed. The reliable design made of high-quality stainless steel meets stringent sanitary requirements, as well as maintaining high stability throughout its entire service life. All this makes the offered capsule filler an excellent choice for increasing the e ...

One color offset ADAST Dominant 516, in beautiful condition, extreemly well kept and maintained. VARN COMPAK III dampening system. All serial equipment and blower.

Baader 1741 fish heading machine Condition: overhauled Designed for heading of cod, pangasius, catfish, tilapia. BAADER 1741 separates the head from the body by two circular knives located at an angle to each other. The head is hereby kept back by a flap thus saving the valuable meat from the neck part of head. At a comfortable working height one operator feeds the fish with the head up into the machine. Supported by the vertical fins on two fish guides, the fish is transported through the machine by two conveyors circulating at a constant speed and equipped with drivers. The two knives than separates the head from the body close behind the collar fins. The deheaded fish falls on a an ascending conveyor belt and is transported to the next processing station whereas the heads leave the machine on a chute at the side. Fish size range: 30 – 70 cm Capacity: up to 40 fish per m ...

EQUIPMENT DATA SHEET Industrial Gas Turbine 1. Equipment Identification Manufacturer: Siemens Energy Model: SGT-800 Equipment Type: Industrial Gas Turbine Configuration: Gas Turbine Core Unit Condition: Brand New / Unused Quantity Available: 2 Units Availability: Immediate Location: TBD ________________________________________ 2. Technical Specifications Rated Power Output (ISO): 51.856 MW Rated Speed: 6600 RPM Fuel Type: Natural Gas Cycle Type: Simple Cycle Frequency Compatibility: 50 Hz Application: • Power Generation • Industrial Power Plants • Combined Cycle Plants ________________________________________ 3. Scope of Supply Included: • SGT-800 Gas Turbine Core Unit ________________________________________ 4. Equipment Condition Units are brand new and unused. Equipment has been kept in storage condition. Photos and nameplate details available. I ...

The most cost effective solution for extruders up to 3.000 kg/h., Very compact shape, less metal to heat up., High resistance to pressures line (up to 350 bar)., Minimum material waste due to the continuous cotamination removal., Adjustable speed of the discharge screw allows the finest handling. Continuous cleaning allows to use filters longer than traditional technologies., Pressure is kept constant all the time for a more even process, Easy maintenance: filter replacement easier and faster, without removing machine’s components. Also available with an automatic opening system that makes opening and closing lid’s operations easier, faster and safer., Double screening system : 2 x Ø 370 mm., With laser screens (from 60 to 350 µm), punched screens (from 400 to 2000 µm),, metallic mesh screens (from 230 to 10 mesh)., Bespoke screens available since they are produced in-house., Lase ...

- Equipment: 4 Matic, 17' alloy wheels, Fog lights, Tow hook, Roof longitudinal bars, Original tinted windows, Long model, Left and right sliding doors and with small sliding window, Front and rear parking sensor, Steering wheel controls, Front and rear panoramic sunroof with curtains, Front and rear electric windows, Leather interior, Mahogany trim, Automatic CV, 7 seats, Adjustable and sliding seats on rails, Front and rear armrests, Large Multimedia- Navi, Cup holder, Front seat heating, Front and rear air conditioning, Heated rear window, Original rubber mats, Floor carpet, Storage space on the dashboard, Armrest - at 320,000 km the engine was reconditioned, and the following parts were changed: BF Germany crankshaft and Kolbenschmidt bearings, 4 Nural pistons, Kolbenschmidt camshaft, Kolbenschmidt valves and tappets, Pierburg EGR valve, Febi complete timing, Febi oil pump, Nissens t ...

Technical Specifications & Performance Data The Used Fossil Flour Filter Della Toffola NF 5 1996 is a pressure filtration unit designed for beverage clarification with diatomaceous earth (fossil flour). It is well suited for pre-bottling and canning stages in beverage production and industrial packaging lines, supporting high product clarity before rinsing, filling, capping, and labeling operations. Manufacturer: Della Toffola Model: NF 5 Year of construction: 1996 (maintenance performed in 2012) Filtration stages: 3-stage configuration for coarse-to-fine clarification Operating context: Suitable for isobaric process environments and prefiltration ahead of carbonated product filling Electrical supply: 400 V, 50 Hz Full load current: 15 A Safety features: integrated protections and interlocks included Documentation: manuals available Typical applications: filtration of water, juice, beer, ...

table length: 500 mm table width: 350 mm ampere: 65 A Control: AGIEVISION 5 CNC total power requirement: 20 kW weight of the machine ca.: 4000 kg dimensions of the machine ca.: m A G I E (Switzerland) CNC - Controlled Wire Cutting EDM Machine Model AGIECUT PROGRESS V 3, Year 2007 Working range, X Y Z (=height) 500 x 350 x 426 mm Wire head, U-V axis (helical/taper cuts) + / - 30 °/ +/- 70 mm Resolution of axes 0.0001 mm Speed for positioning the axes up to 3 m/Min. Tolerances (If machine is new) 4 µ Workpiece dimensions, L x W x H max. 1.050 x 650 x 420 mm Max.weight of workpiece with/w.o. Dieelektricum 400/800 kg Clamping System Universal Beams with fixing holes Cutting wire Ø 0.2 – 0.33 mm Size of wire roll up to 25 kg Cutting speed of wire  ...

Key data: 2866 KW, 6300 V

2 x Wartsila 16V25SG Combined Heat and Power (CHP) generators These engines were installed but only run for a short time. They have been kept in a heated location when not in use. Scope of supply: CHP generating set including Engine, Alternator, Base Frame, Control panel, Gas line. Notes: There are 2 Wärtsilä Generators and another one with a broken cylinder head that can be used for spares. Available for sale from Gas Engine Exchange. Please check our full range of equipment at gasengineexchange.com.

Connected loads: 220 V, 50 Hz, 6 A Strokes per minute (RPM): 5 - 30 Power drive motor: 0.55 kW Condition: fully functional, well-kept Availability: as of now

pressure: 20.0 t chamfer lenght: 850 mm distance between columns: 850 mm back stop - adjustable: 375 + 400 mm stroke of upper beam: 196 mm dayligth: 470 mm ajustment speed: 200 mm/sec table height: ca. 900 mm total power requirement: 5.0 kW weight of the machine ca.: 2500 kg New price ~ 85.000 euros well-kept / very good condition () with electromechanical direct drive (servo motor + ball screws) Machine is operated without hydraulic oil - in checked condition - machine video - https://www.youtube.com/watch?v=foxzKIA7vX8 Description : High performance, fast travel speeds and the best ergonomics this bending machine to a perfect tool in terms of productivity and Accuracy. This allows an unrivaled high productivity in the field of small and middle bending parts can be achieved, since even complicated bending sequences several stations can be processed very quickly. A large number of di ...

Key data: 1000 kN, 127 g/PS, 35 mm

Regularly serviced machine that is always kept in top shape. The screw rotation is carried out with an electric servo motor, which is an energy-efficient solution. The rest of the machine is identical to the standard version of the 420 S. The presence of the core puller in this type is extra. Another special feature is that the injection molding unit can be moved from the center. Software and technologies can be read from a CF disk. The notification can be made in both Hungarian and German. Manuals can also be in German or Hungarian. Currently, the machine has a 35 mm auger for technical materials in good condition. A video of the operation of the machine was also created, which can also be tried out in person at our site. Please see our other ads. Information about the machines we offer and our company: - We only sell machines that are owned by us and can be purchased in our warehouse ...

Key data: 8700 KW, 11003 kVA, 6000 V

Natural Gas Generating Set 8.7 MW/50Hz Wärtsilä W20V34SG with auxiliary equipment This 8.7 MW natural gas-fired power plant, manufactured by Wärtsilä in 2007, is in excellent condition. It has only 17,450 total operating hours and has been consistently serviced by Wärtsilä, including the most recent scheduled 16,000-hour service. The plant ceased operation in 2019 and has since been kept in a warm standby state to prevent corrosion. A professional condition inspection was conducted in November 2024, confirming that both the engine and alternator are in perfect condition. The unit is now available for serious buyers. The plant complies with stringent European emission regulations. It is engineered to operate in high ambient temperatures; the high-temperature (HT) cooling circuit uses air radiator cooling, while the low-temperature (LT) circuit is cooled via a cooling tower.  ...

This Mitutoyo Crysta Apex C 7106 was manufactured in 2023. It has been completely overhauled and features various probe trees along with GEOPAK and CAT1000PS software. Kept in a measuring room and regularly calibrated, this machine ensures reliable precision. Contact us for further details regarding this machine.

BPR BA 35 Asymmetrical CNC tube and profile bending machine with 3 driven rolls Factory REMANUFACTURED, RETROFITTED and UPGRADED in 2020. AS-NEW CONDITION MACHINE ! Contact: info@roce.hr / roce.strojevi@gmail.com Reason for Sale: Very low operating hours. Stored for years as a properly packed backup machine. In 2020, it was sent to the original manufacturer for full factory refurbishment and modernization (although fully functional at the time). After refurbishment, it was again kept in storage as a reserve unit. Now sold only because it is no longer needed as backup capacity. Excellent condition. Ready for immediate use. Description: This CNC-controlled profile bending machine is designed for complex bending operations with continuous radius variation. It allows choice between automatic and manual operating cycles, providing flexibility for different produc ...

Very good condition four-shaft shredder UNTHA RS-30 The machine is located in a container with a discharge belt/articulated belt as a chain belt conveyor. Easy to transport, can be moved with a hook dispenser. Easy access to the container, wide inspection door. A very nice facility in a well-kept condition First Hand Machine! Operating hours only: 4,307 h Year of manufacture: 07.2019 Power: 2 x 11 kW Cutting opening L x W 420 x 560 mm Knife width: 18 mm Built-in strainer: Ø mm Electrical cabinet : complete with control Funnel Discharge belt Containers

cutting diameter: 335 mm saw band length: 4400 x 34 x 1.1 mm capacity 90 degrees: flat: 500 x 335 mm capacity 45 degrees: round: 305 mm capacity 45 degrees: flat: 305 x 335 mm capacity 60 degrees: round: 180 mm capacity 60 degrees: flat: 170 x 335 mm clamping range: 0 - 500 mm work height max.: 750 mm coolant capacity: 100 l engine output: 3.0 kW weight: 1320 kg range L-W-H: 1450 x 2350 x 1950 mm in a well-kept condition current new price machine approx. 35.000 euros special price on request Equipment: - robust electro-hydraulic mitre bandsaw semi-automatic (INDUSTRY) Particularly suitable for universal use in a variety of applications . cross-sections, materials and frequently changing miter cuts Semi-automatic sawing sequence with workpiece clamping-sawing-raising - Central machine operation - stepless manual miter adjustment miter adjustment 45°li - 90° - 45°re - 30° ...

Tetra Pak Aseptic Dosing unit F is a unique and innovative new technique where functional ingredients are injected with high precision into the base product after the final heat treatment, just before filling. Used for UHT applications, providesautomatic aseptic in-line dosing of ingredients. Ingredients that are suitable for aseptic dosing by the Tetra Pak Aseptic Dosing Unit F: dose sensitive ingredients like enzymes e.g. lactase, vitamins, minerals, Omega 3, probiotics, flavours, colours in everything from plain milk to formulated products. The system ensures the survival and stability of heat sensitive function that the charachteristics of the ingredients are not changed. It fits with any filling machine with a capacity between 1.000 - 20.000 l/hr with a continuous flow. The Tetra Pak Aseptic Dosing unit F is fully automated and installed between aseptic processing and the aseptic fi ...

Volvo XC90 2.4 D5 AWD 2 keys Complete documents The car starts and runs perfectly For sale: a beautiful and well-maintained Volvo XC90 2.4 D5, Summum trim level, with 7 seats, 4x4 (AWD) and automatic transmission. Recently imported from Germany a few days ago. 253,000 km with service book and history. Engine and gearbox in perfect condition. Very attractive metallic gray-beige (champagne) color. Very good technical condition, with a clean and well-kept interior. A comfortable, safe, and spacious vehicle. FEATURES & EQUIPMENT • Adaptive Bi-Xenon headlights • Headlight washers • Front and rear parking sensors • Heated windows • 4 electric windows • Electric mirrors • Electric sunroof • Retractable navigation system • Steering wheel controls • Cruise control • Leather steering wheel • Leather upholstery • Electrically adjustable and heated front seats • Driver s ...

Combining modern technology with practicality, this Ford Transit Custom van is an ideal choice for professional users. Thanks to its recent year of manufacture, well-kept appearance and efficient motorisation, this vehicle is perfectly suited for daily use in a wide range of sectors. The van is equipped with an economical and reliable 2.0 TDCi diesel engine (96 kW) and a manual transmission, ensuring a pleasant driving experience and low running costs. With a maximum permissible mass of 3,200 kg and a payload of approximately 1,050 kg, this vehicle offers an excellent balance between comfort and load capacity. The spacious cargo space is practically furnished and accessible via a sliding door on the side and double rear doors. The interior of the cabin is neat and equipped with modern controls, multi-function steering wheel and comfortable seating for three people. The vehicle has a r ...

Technical Specifications & Performance Data The Used Filling Monoblock Alfatek Oil 1999 is a compact rotary solution engineered for precise dosing and secure closing of edible oils in glass bottles. Configured as a filler-capper monoblock, it combines accuracy, reliability, and ease of integration for second hand industrial packaging projects and complete used bottling line upgrades. Manufacturer: Alfatek Model: MBV 9/1 OLP SV OLIO Year of manufacture: 1999 Configuration: Rotary filling monoblock with integrated capper Filler: 9-valve rotary filler optimized for edible oil Capper: 1-head capping turret Closure size: 31.5 x 24 mm (typical edible oil closure) Nominal speed: up to 1,800 bph on 0.75 L Container type: Glass bottles Bottle format in use: 0.75 L (oil bottle, e.g., marasca style) Product handled: Edible oil Condition: In storage Safety features: Included Documentation: Manuals a ...

Used filling monoblock for spirits 1000 BPHTechnical Specifications & Performance DataThis Filling Monoblock is a compact, second hand bottling unit engineered for precision filling and capping of glass bottles. Manufactured in 2023 and CE marked, it is an excellent choice for upgrading a used bottling line or integrating into new beverage production and industrial packaging environments. The machine operates in a linear configuration and includes an aluminum screw capper, ensuring reliable sealing performance for standard 18 mm closures.Production speed: 1000 bottles per hourBottle formats: Compatible with 0.5L and 1.0L bottle formatsContainers: Designed for Glass bottle handlingFilling system: VolumetricCapping: Aluminum screw cap, 1 head, 18 mmRotation/Configuration: LinearModel: JSM-ZFC2Manufacturing year: 2023Power: 2.2 kWVoltage: 220 VFrequency: 50/60 Hz capable (50 Hz nominal)Dime ...

Technical Specifications & Performance Data The GAI 21116 is a second hand volumetric filler engineered for precise edible oil dosing in glass bottles. Built in 2009, this unit delivers consistent performance for small to medium-scale industrial packaging operations or as a dedicated module within a used bottling line. Manufacturer: GAI Model: 21116 Year of manufacture: 2009 Filling principle: Volumetric with self-levelling control Number of filling valves: 16 Machine configuration: Linear (non-rotary) Rated speed: up to 3000 bottles per hour (bph) Container types: Glass bottles Product application: Edible oil and similar viscosities Condition: READY FOR OPERATION Safety features: Integrated guards and interlocks Documentation: Manuals available Designed for accuracy and repeatability, the 16-head array ensures steady throughput with minimal giveaway. The linear frame simplifies access a ...

Technical Specifications & Performance Data The Used Case Packer Acmi 2009, model INSER 2C, is a reliable second hand solution for industrial packaging in beverage production. Designed to collate and insert containers into corrugated cases with precision, it complements upstream filling, capping, labeling, and rinsing operations within a used bottling line. This single-head case packer supports stable throughput for medium-speed lines. Manufacturer / Model: Acmi INSER 2C Year of manufacture: 2009 Category: Case Packer for industrial packaging Production speed: up to 8,000 bph (bottles per hour) No. of heads: 1 Container types: PET bottles, glass bottles, aluminum cans (subject to tooling and format parts) Typical product applications: water, juice, beer, wine, and other beverages within beverage production Case handling: compatible with standard corrugated cases/cartons used on bottling  ...

Technical Specifications & Performance Data The OMA Stella Tu 400 is a compact, second hand Casepacking Monoblock designed for reliable end-of-line operations in beverage production. Built in 1996 and maintained in ready-for-operation condition, this unit integrates a case erector with a single-head packer to efficiently collate and load bottles into corrugated cases. Manufacturer / Model: OMA Stella Tu 400 Machine type: Casepacking Monoblock with integrated case erector and single-head packer (1 socket) Year of manufacture: 1996 Nominal speed: 2500 bph (approx. 416 cases/h for 6-bottle cases; ~208 cases/h for 12-bottle cases) Case formats: 6 or 12 bottles per case Bottle format: 0.75 L Container types: Glass bottles (configured for glass; see Integration section for broader line compatibility) Dimensions: Width 3220 mm; Length 3040 mm; Height 2750 mm Electrical: 380 V, 50 Hz, 3.5 kW Con ...

Used Case Packer MONDO & SCAGLIONE MI 2/3 up to 10000 bph This Used Case Packer delivers high efficiency and, therefore, meets the demands of large-scale bottling operations. Mondo & Scaglione manufactured this machine, which remains in storage, ready for reinstallation and immediate use in production plants. Its technical specifications and safety features, as a result, ensure reliable and automated packaging. Technical Specifications of the Used Case Packer MONDO & SCAGLIONE MI 2/3 up to 10000 bph The Used Case Packer MONDO & SCAGLIONE MI 2/3 up to 10000 bph reaches operational speeds of up to 10000 bottles per hour (BPH). Consequently, this performance makes it perfect for high-volume production lines, where maintaining speed and operational continuity is crucial for efficient output. The machine includes 18 fixed heads, which ensure steady and consistent performance throughout the pa ...

SACMI OPP Roll-fed Labeling Machine – Overview This used SACMI OPP roll-fed labeling machine is configured for high-efficiency wrap-around label application on PET bottles. Built in 2008 and designed for modern beverage production, it integrates seamlessly into a used bottling line or can operate as a standalone station within industrial packaging environments. With a nominal capacity of 12,000 bottles per hour, it is well suited for medium-speed operations in water, juice, and other beverage segments that use OPP film labels. SACMI engineering is known for durability, precision, and reliability, making this second hand labeling solution a strong fit for producers seeking dependable bottling equipment. The machine supports multiple PET bottle formats, including 1.5L, 0.6L, and 0.33L sizes, providing flexibility for varied SKUs and seasonal product runs. OPP film labels, applied as  ...

Technical Specifications & Performance Data The Kosme KOSMAC 6T-S2-E1 is a robust rotary labeling solution ideal for beverage production and industrial packaging environments. This second hand labeling machine from 1991 is maintained in excellent condition and ready for operation, offering reliable front-and-back application for multiple bottle formats on a compact footprint that integrates smoothly within a used bottling line. Manufacturer: Kosme Model: KOSMAC 6T-S2-E1 (Kosmac) Year: 1991 Category: Labeling Machine (rotary, wet-glue) Labeling method: Paper/Glue and PP/Glue Label position: Front and Back Number of plates: 6 Number of stations: 1 (configured for dual-label application) Rotation direction: Clockwise Formats processed: 10 (format-dependent output) Adjustments: Manual head adjustment; manual glue film regulation Included accessories: 6 label magazines and 11 glue drums for m ...

Used Self-Adhesive Labeller with Shrink Capsule Applicator – 2000 bph – Overview Second hand E-Packaging Saturno 2T linear labeling line with integrated shrink capsule applicator and heat heads. Designed for industrial packaging in food and beverage production, this unit applies front and back self-adhesive labels and finishes bottles with a shrink capsule in a compact, operator-friendly layout. Ideal for upgrading a used bottling line with reliable labeling and capsule finishing at up to 2,000 bottles per hour. Technical Specifications & Performance Data Model: E-Packaging Saturno 2T Year of manufacture: 2015 Configuration: 2 labeling stations (front + back) Labeling method: Pressure-sensitive/self-adhesive (PSL) Capsule system: Capsule applicator with shrink heat heads Bottle flow: Linear Formats processed: 250 ml and 500 ml Nominal speed: approx. 2,000 bph (format/label depe ...