kennametall used for sale

KEN 2311-HOS laboratory dishwasher KEN 2311-HOS is a compact cleaning and disinfecting device. It is used for washing, disinfecting and drying (option) surgical instruments, rigid endoscopes, instruments for minor invasive procedures, anesthesiology, abdominal and tubular equipment, anesthesia and breathing tubes, surgical shoes, as well as bottles, trays, glassware. There are several versions: single-door and two-door (through) models. Continuous machines are always preferred because the physical separation of "dirty" and "clean" areas optimizes the hygienic environment and reduces the risk of cross-infection. ■ User-friendly control panel - ensures correct operation ■ Possibility of individual programme choice. 4 programs as default ■ Process indicator bar shows how far the program has progressed ■ Double monitoring of temperature (EN/ISO 15883) ■ Connection of 2 t ...

KEN 2311 Laboratory dishwasher KEN 2311 is a compact cleaning and disinfecting device. It is used for washing, disinfecting and drying (option) surgical instruments, rigid endoscopes, instruments for minor invasive procedures, anesthesiology, abdominal and tubular equipment, anesthesia and breathing tubes, surgical shoes, as well as bottles, trays, glassware. ■ User-friendly control panel - ensures correct operation ■ Possibility of individual programme choice. 4 programs as default ■ Process indicator bar shows how far the program has progressed ■ Double monitoring of temperature (EN/ISO 15883) ■ Connection of 2 types of chemicals ■ Lockable lower compartment for storing chemicals Specifications Mains connection 3 x 400 V,N,J, 50Hz Connected load/fuse 10kW/16A Water connection Cold untreated water: 1 piece, 3/4" RG, 5-30°C, 0-30°dH Water connection Hot so ...

KEN 311-OS laboratory dishwasher High Capacity Laboratory Dishwasher The flexible machine for laboratories with high rinsing requirements The KEN 311-OS covers the need for quality washes in laboratories Advantages Washing instruments in up to 2 levels at once High capacity User-friendly and ergonomically correct front operation Front display with plain text Low noise level Low energy and chemical consumption for the benefit of the environment and the economy Minimal maintenance and servicing Specifications: Height 140 cm Width 60 cm. Depth 64 cm. Electrical connection 400 Volt 3N 50 Hz Power 10,1 kW Condition: This device was removed in working order due to a closure of a site and has been stored ever since. It seems to be in very good condition. Unfortunately, we do not have the knowledge or tools to test the device further and Therefore, this device  ...

KEN 211-OS laboratory dishwasher High Capacity Laboratory Dishwasher The flexible machine for laboratories with high rinsing requirements The KEN 211-OS covers the need for quality washes in laboratories Advantages Washing of instruments in up to 2 levels High capacity User-friendly and ergonomically correct front operation Front display with plain text Low noise level Low energy and chemical consumption for the benefit of the environment and the economy Minimal maintenance and servicing Specifications: Height 140 cm Width 60 cm. Depth 64 cm. Electrical connection 380 Volt 3N 50 Hz Power 6,6 kW Product condition: Condition: Without plug ? More items - new and used - can be found in our shop! International shipping costs on request!

This Ken Focus5 2022 Universal Machining Center was manufactured in the year 2017 in Taiwan. It is equipped with a HEIDENHAIN control unit and has 5 axis. The machine has a spindle speed of 24000 rpm.

Hot water generator KENT Duo HotBox 500 bar Description: - Working pressure: up to 500 bar - Flow rate: 2 x 11-56 L/min. - Burner: oil / approx. 90 KW - Tank: approx. 20 L - incl. Automatic Start/Stop Flow - incl. flame control - incl. operating hours counter - Chassis: Black lettered - Hood stainless steel Features: - Powder-coated frame with stainless steel cover - 4 wheel chassis with solid rubber tires - fan motor, - Oil pump - KENT burner boiler with approx. 90 KW heating capacity - Automatic switch-off start-stop flow controlled - incl. E-connection cable - Water inlet temperature max. 60°C Scope of delivery: - Inlet hose Dimensions: (L x W x H in mm) 1000 x 680 x 760 Weight: approx. 190 Kg Shipping possible. Prior sale and error excepted. The terms and conditions of Cleantec-MR apply.

KENYO VS80160 5-axis Machining center with CE Producer: Nanjing Kenyo Precision Machine Manufacture Co., Ltd YOM 2015 Simultaneously 5 axes Total Installed Capacity 22.4 kW 5-Axis vertical Milling machine for blanks up to 1000-1500kg Stroke X/Y/Z- 1600/800/800 mm Working table size 800x1800 mm Diameter of NC swivel table axle C 630 mm Rotating mass clamping force 4000 Nm Spindle clamping force: ≥ 2000 Nm Maximum mass load 2000 kg Spindle diameter 170 mm Spindle rotation angle- ± 110 Degree Tool Store Type BT40 ISO Tool magazine 24 pcs Maximum spindle rotation speed 10.000 rpm Spindle power 15 kW Ball-Screw pair HIWIN Spindle Hesheng Ball Bearings NSK Positioning accuracy ≤ X/Y/Z: 0.015 mm, C: 0.002 degree, B: 0.002 degree Repeat accuracy ≤ X/Y/Z- 0.01 mm, C:0.0015 Degree, B:0.0015 Degree Quick move: ≥ 10000 mm/min Milling speed: ≥ 1 to 8000 mm/min OC ...

This Kenner KWJ 3020 C KMT Streamline SL-V 30 Waterjet cutting machine was manufactured in the year 2012 in Germany. It is equipped with a Kenner control unit.

4 used LTG KENYA dust and fiber separators and compactors, year 1995, each composed composed of: centrifugal fan (radial blades) dust suction ventilator, motor with 11 kW power, blade diameter 800 mm cyclone centrifugal dust separator (Vortex) type ZSC 200, for air volume up to 2000 m3/h LTG compacting power screw (CPS), screw diameter 110 mm, motor with 0,75 kW power dust quantity up to 100 Kg/h

Tangential grinding Kent brand Model KSG63-FD1 Table 300x600mm Availability: starting from April 2024 Year 2000

This KENT KMV 13 YL Vertical Machining Centre was manufactured in the year 2007. The machine has a spindle speed of 10000 rpm and 3 axis.

Refrigeration compressor, chiller, refrigeration compressor, refrigeration unit, refrigeration compressor, compressor, filter dryer housing, filter dryer, receiver dryer -Manufacturer: KMP Kenmore, Receiver Dryer -Type: KHP 64/130/S-8X8MM-DF -Dimensions: Ø 65 x 167 mm -Weight: 0.6 kg

Collet holder, tool holder, tool holder, milling holder, milling tool -Manufacturer: Kennametal -Take: SK40 -16x clamping sleeves: Ø 3-16 mm -suitable for: tool changer -Weight: 5.5 kg

Kenplaat mixing tank Stainless 1500l mixing tank, top mounted motor, level detection, side bottom discharge

Inv. Num. : 7287 Type: KGS- 250 AHD Producer: KENT Created: 2001 Parameters: Work table length: 540 mm Work table width: 260 mm Machine weight: 1300 kg

Description: Wide finishing cutter of the Kennametal brand Diameter: Ø 200 mm Suitable for fine machining of cast iron and cast iron with nodular graphite. Features perfect axial run-out without adjustment of the insert. High-precision insert seat for outstanding surface quality and evenness. Easy handling and cost-effective set-up of the milling machine.  , Approx. Onsite Dimension. (l x w x h): 200 x 200 x 80 mm, weight approx.: 10 kg

Pot discs - diameter:175 mm spindle extension:180 mm operating voltage:400 V Machine weight approx.:300 kg room requirements approx.:0.90 x 0.60 x 1.80 m

Table length: 0 mm Table width: 0 mm Longitudinal X: 0 mm Cross Y: 0 mm Vertical Z: 0 mm Positions ATC: 0   Number of pallets: 0   CNC Brand: 0 CNC Model: 0 Control: FANUC Series 18i-MB Technical data Number of axis total: 3 Table length: 1700 mm Table width: 810 mm Number of T-channels: 5 T-channel width: 22 mm Distance of the T-slots: 160 mm Longitudinal travel (X-axis): 1600 mm Transversal travel (y axis): 815 mm Vertical travel (z axis): 815 mm Distance from vertical spindle to table: 1035 mm Spindle speeds: number (steps) from: 30 rpm up to: 4500 rpm Tool magazine number of tools: 32 Spindle nose: ISO: 50 Tool diameter: 110 mm Tool lenght: 350 mm Max. tool-weight: 15 kg Feeds (X, Y, Z): 1 - 10000 mm/min Rapid traverse:: 15 m/min Milling spindle motor: 18.5 kW Machine´s weight about: 13300 kg Overall dimensions machine: Length: 4488 mm Width: 3448 mm Height: 3250 mm Various acce ...

Grinding length: 0 mm Grinding width: 0 mm Grinding height: 0 mm Wheel diameter: 0 mm CNC Brand: 0 CNC Model: 0 Control: FANUC Series 21i-MB Technical data Table length: 3200 mm Table width: 1500 mm Longitudinal travel (X-axis): 3300 mm cross travel (Z-axis): 1680 mm Max. distance from table to spindle centreline: 1155 mm Table load max.: 6000 kg Passage between the columns: 2000 mm Grinding wheel: Diameter: 500 mm Width: 120 mm Bore: 203.2 mm Noise level: 70 dB (A) Voltage 50 Hz 3x: 400 Volt Grinding spindle motor: 32 kW Total power required: 66 kW Machine´s weight about: 32400 kg Overall dimensions machine: Length: 11030 mm Width: 6075 mm Height: 4450 mm Various accessories: Coolant system Paper filter facility Oil mist extractor Magnetic plate: Length: 3200 mm Width: 1500 mm Lamp Handwheel electroinic Status light

Table length: 0 mm Table width: 0 mm Longitudinal X: 0 mm Cross Y: 0 mm Vertical Z: 0 mm Positions ATC: 0   Number of pallets: 0   CNC Brand: 0 CNC Model: 0 Control: FANUC Series 0i-MD Operating hours: 12673 Technical data Number of axis total: 3 Table length: 2200 mm Table width: 1650 mm Number of T-channels: 9 T-channel width: 22 mm Distance of the T-slots: 170 mm Table load max.: 8500 kg Longitudinal travel (X-axis): 1950 mm Transversal travel (y axis): 2200 mm Vertical travel (z axis): 900 mm Distance from vertical spindle to table: 940 mm Spindle speeds: stepless from: 30 rpm up to: 4500 rpm Tool changer: number of tools: 32 Spindle nose: ISO: 50 Tool diameter: 110 mm Tool lenght: 350 mm Max. tool-weight: 20 kg Feeds (X, Y, Z): 1 - 10000 mm/min Rapid traverse: long.: 10 m/min Rapid traverse: transversal: 12 m/min Rapid traverse: vertical: 12 m/min Voltage 50 Hz 3x: 400 Volt ...

Table length: 0 mm Table width: 0 mm Longitudinal X: 0 mm Cross Y: 0 mm Vertical Z: 0 mm Positions ATC: 0   Number of pallets: 0   CNC Brand: 0 CNC Model: 0 Control: FANUC Series 18i-MB Operating hours: 20000 Technical data Number of axis total: 3 Table length: 3200 mm Table width: 1650 mm Number of T-channels: 9 T-channel width: 22 mm Distance of the T-slots: 170 mm Table load max.: 8500 kg Longitudinal travel (X-axis): 1950 mm Transversal travel (y axis): 3200 mm Vertical travel (z axis): 900 mm Distance from vertical spindle to table: 940 mm Spindle speeds: stepless from: 30 rpm up to: 4500 rpm Tool changer: number of tools: 32 Spindle nose: ISO: 50 Tool diameter: 110 mm Tool lenght: 350 mm Max. tool-weight: 20 kg Feeds (X, Y, Z): 1 - 10000 mm/min Rapid traverse: long.: 10 m/min Rapid traverse: transversal: 12 m/min Rapid traverse: vertical: 12 m/min Voltage 50 Hz 3x: 400 Vol ...

Table length: 0 mm Table width: 0 mm Longitudinal X: 0 mm Cross Y: 0 mm Vertical Z: 0 mm Positions ATC: 0   Number of pallets: 0   CNC Brand: 0 CNC Model: 0 Control: FANUC Series 0i-MD Operating hours: 15000 Technical data Number of axis total: 3 Table length: 3200 mm Table width: 1650 mm Number of T-channels: 9 T-channel width: 22 mm Distance of the T-slots: 170 mm Table load max.: 8000 kg Longitudinal travel (X-axis): 3200 mm Transversal travel (y axis): 2000 mm Vertical travel (z axis): 900 mm Distance from vertical spindle to table: 940 mm Spindle speeds: stepless from: 30 rpm up to: 8000 rpm Tool changer: number of tools: 32 Spindle nose: ISO: 50 Tool diameter: 125 mm Tool lenght: 350 mm Max. tool-weight: 18 kg Feeds (X, Y, Z): 1 - 10000 mm/min Rapid traverse: long.: 10 m/min Rapid traverse: transversal: 12 m/min Rapid traverse: vertical: 12 m/min Voltage 50 Hz 3x: 400 Volt ...

Turning tool with indexable cutting jaws, tool holder, turning tool, indexable insert holder, turning tool, indexable insert steel -Dimensions: 150/25/H25 mm -Weight: 1 kg

Turning tool with indexable cutting jaws, tool holder, turning tool, indexable insert holder, turning tool, indexable insert steel -Dimensions: 150/25 mm -Price: per piece -Number: 1x available -Weight: 1 kg

Turning tool with indexable cutting jaws, tool holder, turning tool, indexable insert holder, turning tool, indexable insert steel -Dimensions: 125/20/H35 mm -Weight: 1 kg

Turning tool with indexable cutting jaws, tool holder, turning tool, indexable insert holder, turning tool, indexable insert steel -Dimensions: 170/30/H40 mm -Weight: 1 kg

Tool magazine, tool holder, tool holder, milling holder, milling tool -1 recording: HSK80 -for tool changers -Shrink chuck collet flat chuck reducing sleeves cutter head shell end mill -Weight: 2 kg

Transformer, transformer, converter, three-phase autotransformer, isolating transformer, 3-phase transformer -PCB containing insulating liquid exchanged in 1998 -Input: 6000V -Output: 400V -Power: 200kVA -Type: LT -(for technical data see photos) -Dimensions: approx. 1300/800/H1600 mm -Weight: about 1000 kg

Tool holder, milling holder, milling tool -Adapter -Take: SK40 -Tool holder: MK3 -with: CNC pull studs -suitable for: tool changer -Number: 1x recordings available -Price: per piece -Total length: mm -Weight: 3.6 kg/piece

Tool holder, milling holder, milling tool -Adapter -Take: SK40 -Tool holder: MK2 -with: CNC pull studs -suitable for: tool changer -Number: 1x recordings available -Price: per piece -Total length: mm -Weight: 1.6 kg/piece

Tool holder, milling holder, milling tool -Adapter -Take: SK40 -Tool holder: MK1 -Number: 1x recordings available -Price: per piece -adjustable in length -Total length: mm -Weight: 1.4 kg/piece

saw blade diameter: 355 mm cutting diameter: mm stroke: mm total power requirement: 11 kW weight of the machine ca.: 2,5 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

very good condition year 2007, with SELCA 4040D X 1350 Y 675 Z 635 Refrigeration attr. spindle, ZF RANGE CHANGE, 10000 rpm, 24 tools, BT 40, chip conveyor, Z axis gas balancing, cooling of X Y Z screws and spindle with conditioning unit, weight 7500 KG, transport dimensions 2500 mm.

Description: • Moulder • Serial number 825018 • Total installed power 16.10 KW • Working width from 23 mm up to 180 mm • Working height from 7.50 mm up to 120 mm • Total table length approx. 2700 mm • Entrance table length 1700 mm • 4 heads: below - right - left  ,- above • Motor power of the lower-upper heads 7.50 KW • Motor power of the right-left heads 7.50 KW • Spindles diameter 40 mm • Spindles rotation speed 6000 rpm • Feeding motor 0.80 KW • 2 feed speeds: 6 - 12 m/min • Control  ,with digital reader for workpiece thicknes Approx. Onsite Dimension. (l x w x h): 2,730 x 1,110 x 1,410 mm, weight approx.: 950 kg

Technische Daten Technical Data Table Surface 460x200 mm Longitudinal / Square 510x225 mm Speed Spindle / Spindle Speed 2850 rpm Grinding wheel 200x25x32 mm Digital Anzeige / Digital Readout Acu Rite If you are interested in this machine, please contact us, we will be happy to send you a detailed offer If you are interested in this machine, please contact us and we will be pleased to send you a detailed offer

Sell large items Kentron quadrant 1000 PEEK. Material comes from corporate insolvency, in stock. Different batches. Delivery possible, shipping costs on request. Payment in advance. The post includes: Round material length 1000 mm each. 3 piece diameter 20mm 3 piece diameter 25mm 4 piece diameter 30mm 4 piece diameter 40mm

Iron grille rear wall grille grid Zwinger fence galvanized - 2450 x 950 mm - used - 10 pieces They can also be used, for example, to build floors, stairs, dog kennels, window bars or fences. We also have other storage shelves or high racks and matching accessories in stock both in used and in new condition. If you are interested, we look forward to your call. We are happy to offer you suitable stands, trusses, lattice box supports, lattice rear walls and much more. We also recommend ourselves as a supplier for complete storage and operating equipment. Request our printed catalogue. Properties: -Galvanized - Used, in good condition - Solid and robust design - Ready for collection by arrangement Dimensions: - Width: 2,450 mm - Depth: 950 mm - Mesh size: 50 x 50 mm - Rod diameter: approx. 3 mm Scope of delivery: - 10 Grating Properties: Condition: g ...

Pressure regulator, precision pressure regulating valve FAIRCHILD KENDALL 10232 Operating pressure: max. 35.0 bar Pressure control range: 0.03 - 2.0 bar used, tested ! Dimensions: 160 x 115 x 95 mm

honing diameter: 80 / 152 mm stroke: 210 mm throat: 210 mm total power requirement: 4,1 kVA weight of the machine ca.: 1,1 t dimensions of the machine ca.: 1,22 x 0,87 x 2,44 m Kennametal Extrude Hone Machine , Model 77C, Year 2000 Abrasive Flow Machining for pressure flow lapping, or flow grinding of mech. parts. Polishing and deburring or surface modifications of complex components are carried out by means of a viscous abrasive (pressure flow lapping medium) and pressure. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

TECHNICAL SPECIFICATIONS Manufacturer: BROWN LENOX Designation: KUE KEN Jaw Crusher Type: 106 Design: Double toggle jaw crusher Year of construction: 1982 Inlet opening (width/depth): 1065 x 305 mm Gap width: 38 - 75 mm Throughput: 65 - 110 t/h Maximum feed size: 240 mm Drive power: 55 kW Crushing speed: 300 - 350 rpm Total weight: 10,200 kg SPECIFIC COMMENT - Solid crusher construction with steel support

Various turning tools Kennametal, Widia and others Prices on request. Complete package or individually. Other items available on request. A total of 13 lattice box tools through company liquidation. All new and unused. Estimated about 10 tons of mass. Mainly Kennametal, Widia, as well as HSK mounts (approx. 300) and various milling heads (approx. 300).

Disinfecting dishwasher,stainless steel,KEN 211-LAB,wash room W 510 x D 560 x H 530 mm.

Control Solenoid, Electromagnet KENDRION 41 92613B00 ( 4192613B00 ) KFP667 T6 100% ED ( KFP667T6100%ED ) 500 N stroke 8.0 mm 24 V DC Dimensions: 220 x 140 x 160 mm

63mm x 2mm AEF / Thermatool ERW Tube Mill Make: AEF (American Electric Fusion) Tube Diameter: 15mm – 63.5mm Material Thickness: 0.5mm – 2mm Tube Length: 6 meters Double Mandrel Uncoiler Entry Shear & End Welder TIG Power Supply Vertical Accumulator Make: Kent Driven Entry and Exit Pinch Rolls Strip Guiding Unit Forming Mill Individual Gear Boxes Universal 50HP DC Motor Six (6) Forming Stand Five (5) Side Stands Welding Section Make: Thermatool Type: Vacuum ERW Design Power: 200Kw Mechanical Welding Head Beat Removing Head with Winder Cooling Tank & Pump

Back wall grille for pallet rack , grid mat , kennel, lattice fence, wire mesh, lattice back wall Dates/ Price: 220 x 200cm = 60 € net, 71,40 € gross 220 x 150cm = 50 € net, 59,50 € gross Mascht : approx. 4 x 10 cm Galvanized Second-hand goods Holder piece. 10€ net --AVAILABLE MULTIPLE TIMES------

Kannegiesser belt conveyor belt conveyor with DUO-Pusher GF 2500-680-600 RA1309 The Kennegisser belt conveyor is from 2015 and in good (used) condition. In addition, it is 2500 mm longer and equipped with a DUO pusher (sorting pusher). The pusher is used to sort laundry items according to selected criteria. The folded laundry item is pushed by a pusher plate onto a following conveyor or a roller conveyor. 2 support feet are included in delivery. Technical data: Conveying length (NL): 2500 mm Framework width (NB): approx. 680 mm belt width (GuB): 600 mm Height / Belt run (BH): 850 mm +/- 90 mm Number of support feet: 2 pieces Conveying speed (v m/s): 0.1 - 1.1 m/s, reversing operation with FU Drive: Normal Motor Electrical data: 400 V / 50 Hz Deflection drum (UT): Ø = 60 mm belt return roller: Ø = 50 mm Belt: 2-layer PVC belt, black, smooth Year of construction: 10/2015 Special featur ...

Transformer, control transformer, three-phase, with rectifier and capacitor VARAT S.R.L. Mod. 400.002 Primary: 380 V 3AC 400 VA Secondary: 18 / 20 / 22 V Rectifier: SEMIKRON SKD31/08 Capacitor: KENDELL 10 000 μF, 63 V DC used, tested ! Dimensions: 180 x 110 x 180 mm

Assortment of groove boxes with base holder, 10 pieces HORN, PAUL HORN 2x RNK220.3218.14 cutting depth: max. 15 mm, cutting direction; Right 2x LNK356.0220.05 cutting depth: max. 6 mm, cutting direction; Left 4x LNK356.1220.16 cutting depth: max. 5 mm, cutting direction; Left 2x RNK356.1220.16 cutting depth: max. 5 mm, cutting direction; Right all Ground Holders: L220.TS40.K1 Separator Code: HORN-TS40 Mounting Type, Machine Side: KMT - Modular Cone Interface with Ball Raceway System, KM System ( KENNAMETAL ), UTS System ( WIDIA ) used, tested ! Dimensions ( packaging ): 235 x 150 x 125 mm

Shrink chuck, Shrink chuck KENNAMETAL HSK A100x25x115 HSK100ATT25115M Tool: Ø 25 mm Cantilever length ( A-dimension ): 115 mm Mounting: HSK - A100 New ! Dimensions ( shrink chuck ): 165 x Ø 100 mm Dimensions ( packaging ): 130 x 105 x 175 mm

Tool holder KENNAMETAL TH1533413 / HSK100-A Lk-Nr.: 102642147 Tool: Ø 10 mm / 2x 60° indexable plate Cantilever length ( A-dimension ): 162 mm Mount: HSK - A100 New Dimensions ( tool holder ): 215 x Ø 100 mm Dimensions ( packaging ): 130 x 105 x 225 mm