129,010 used machines on RESALE, but how to find them? Machine Search
: neu : ca. 4 Monate ab Auftragse : 1280 mm : 12 mm : 9 mm : 9 1/min : 3 ° : 7 : 500 mm : 15 kW : 180 l : 950 mm : 1950 mm : 1200 mm : 1800 mm : 3200 kg hydr. drive unit, completely integrated in the machine body overload safety, hydraulic and electrical adjusting of the cutting angle adjusting of the cutting gap blank holder pressure, adjustable support arm with angle stop and scale up to 600 mm 4 rotating knives for VA steel movable pedal switch with solenoid valves Motorised backgauge Central lubrication exchangeable machine table support section area lighting The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: neu : ca. 4 Monate ab Auftragse : 1280 mm : 16 mm : 12 mm : 8 1/min : 3 ° : 7 : 500 mm : 22.5 kW : 250 l : 950 mm : 2100 mm : 1400 mm : 2000 mm : 5000 kg hydr. drive unit, completely integrated in the machine body overload safety, hydraulic and electrical adjusting of the cutting angle adjusting of the cutting gap blank holder pressure, adjustable support arm with angle stop and scale up to 600 mm 4 rotating knives for VA steel movable pedal switch with solenoid valves Motorised backgauge Central lubrication exchangeable machine table support section area lighting The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Key data: 125 t
Single-column press – manufacturer Durendus – 125 t servo press – table 2200 × 750 mm For sale is a hydraulic C-frame servo press from the manufacturer Durendus with an adjustable press force of up to 125 t and an integrated 50 t ejector. Thanks to modern servo hydraulics, the machine offers significantly reduced energy consumption of up to 40% compared to conventional systems and is ideal for demanding assembly, forming and production processes. = Technical data + information: Hydraulic servo press – C-frame – 125 t General information - Manufacturer: Durendus - Model: Single column press / servo press - Type: C-frame press Laobqcjx Aqtqotxvoa - Press force: 20 – 125 t (adjustable) - Machine weight: approx. 8,700 kg - Dimensions (W × D × H): approx. 2,400 × 2,000 × 3,300 mm - Table height: 870 mm - Installation height: max. 1,000 mm Table & ...
: neu : ca. 10 Wochen ab Auftrags : Türkei : 10900 € : 209.28 € : 1250 kg : 1300 mm : 450 - 550 mm : 400 mm : 80 mm motorized drive mechanical adjustable coil mandrel with 4 jaws speed control for decoiling speed aswell as acceleration- and deceleration times photoelectric proximity ensor SICK for sag control WITH PNEUMATIC DOWNHOLER The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: neu : Bulgarien : 133520 € : 2523.53 € : 1320 mm : 3000 mm : 625 mm : 155 mm : 940 mm : 700 mm : 15 : 160 MK : 4 : 3,7 - 15,6, 14,7 - 62, 58 U/Min : 160 : 0.032 - 38.9 mm/U : 0.016 - 19.45 mm/U : 0.5 - 480 mm : 1/16 - 60 Gänge/ : 0.125 - 120 : 685 mm : 270 mm : 125 mm : 6 MK : 260 mm : 30 kW : 8550 kg driven by variable speed control (4 steps) 3-axes digital readout FAGOR with CSS (constant surface speed) quick change toolpostAmestra with 4 holders (3 square, 1 round) 3-jaw chuck Bison 3204/DIN6350, Ø 500 mm spindle dead center coolant equipment full length rear splash guard leadscrew and shaft protection safety guard for the chuck toolholder guard levelling bolts and plates tailstock quill reducer electric motor movement of tailstock low voltage machine lamp operating manual machine according to ",CE", FURTHER TURNING LENGTHS: turning length1.500 mm € 118 670,00 turn ...
bore capacity in steel (diameter):40 mm arm length:1250 mm workpiece height max.:1390 mm Dist. spindle nose & working surface base:350 - 1260 Spindle travel:315 max. boring diameter:40 mm Distance between spindle axis and column:350 - 1260 spindle taper:4 MK Range of spindle speeds:22,4 - 2800 Number of spindle speeds:16 Number of spindle feeds:16 Table:500 x 630 Travel of spindle head:900 mm total power requirement:3,5 kW dimensions of the machine ca.:2150x1070x2840 m feed:0,09 - 1,5 m/min weight of the machine ca.:3 t
x-travel:1.250 mm y-travel:880 mm z-travel:800 mm spindle turning speed range:1 - 10.000 U/min high speed spindle taper ISO:50 table-size:1.250 x 1.000 mm max. workpiece weight: 2.000 kg feed speeds infinitely variable:1 - 30.000 mm/min rapid traverse speed:40 m/min weight of the machine ca.:16 t dimensions of the machine ca.:7,2 x 4,4 x 2,9 m
grinding length:1250 mm grinding width:400 mm workpiece height:550 mm workpiece weight:750 kg table-size:1720 x 400 mm magnetic clamping plate:1250 x 400 mm dist. center of grinding spindle - table:750 mm turning speed range - grinding wheel:3000 U/min Length movement of the table:1300 mm grinding wheel size:Ø 400 x 50 x 127 mm switchgear cabinet:inkl. hydraulic power unit:inkl. coolant:inkl. voltage:380 V table load:max. 1100 total power requirement:13,8 kW weight of the machine ca.:6000 kg dimensions of the machine ca.:5000 x 3400 x 2400 mm Documents:inkl.
x-travel:1250 mm y-travel:880 mm z-travel:800 mm control: Heidenhain TNC 430 tool change unit:60 Pos. Tool bore:SK 50 turning speeds:8000 1/min size of pallet:1000 x 800 mm total power requirement:56 kVA weight of the machine ca.:14,3 t dimensions of the machine ca.:5,5 x 3 x 3,1 m 5-axis machine with controlled universal milling head (B-axis), 2-palett changer incl. 2 palets, 1000 x 800 mm Production package: - internal coolant supply 40 bar with 900l coolant box (2,25 x 1.3 x 2,2m / 950kg), - chipconveyor (4,85 x 1,2 x 1,75m / 600kg), - ROTOCLEAR, - 3D touchprobe RENISHAW MP 10 - 60 pos. ATC SK 50 - el. handwheel - mech. tool-breakage control, accessories (SK 50 toolholders approx. 100.200 h "machine on", approx. 52.200 h "spindle on", last spindle change in 2020
grinding length:1250 mm grinding width:600 mm workpiece height:730 mm table surface area:1720 x 500 mm headstock: dist. table - spindle center:900 mm max. longitudinal movement:X-1450 feed range:10 - 20.000 mm/min vertical movement:Y-730 mm feed range:0,2 - 3.000 mm/min cross travel:Z-550 mm feed range:5 - 5.000 mm/min power capacity:1500 U/min.- 44 kW / 8000 U/min. - 38 kW kW grinding wheel turining speeds:50-6.000 U/min cutting speed:max. 80 m/sec. weight of the machine ca.:11 t with CNC SIEMENS 840 C auto. dynamic balncing system integrated in the grinding conus profile grinding unit ( on table mounted ) Diamant profile rollers ( dia. max 140 mm , width max. 200 mm, hole 52 H3 ) speed 3000 rpm two magnetic plates ( 1000 x 400 mm, 1200 x 350 mm ) divers Flanges ect.
pressure:400 t distance between columns:1250 mm stroke:250 fix mm no. of strokes:45 /min distance table/ram, max. stroke up, adjustment up:825 mm table surface area:1000 x 900 mm column travel -side:400 x 700 mm ram surface:1000 x 900 mm ram adjustment:100 mm capacity of ejector in table:40 t ejector stroke:160 mm power capacity:270,0 kW weight:44,0 t Dimensions (WxDxH):2,4 x 3,6 x 7,2 m height over floor:6,4 m
pressure:125 t stroke:25 fix mm no. of strokes:70 - 700 /min distance between columns:1150 mm distance table/ram, max. stroke up, adjustment up:400 mm table surface area:1150 x 1000 mm hole in the table:900 x 220 mm side window:650 mm ram surface:990 x 850 mm ram adjustment:60 mm material width:250 mm material thickness:2,5 mm power requirement:46,5 kW weight:29,5 t roll feed:mechanical, Schuler, WK 8-250
pressure:160 t stroke:160 fix mm no. of strokes:30 - 120 /min distance between columns:1190 mm distance table/ram, max. stroke up, adjustment up:735 mm table surface area:1200 x 1000 mm hole in the table:500 x 300 mm table height over floor:900 mm side window:600 mm ram surface:1000 x 800 mm ram adjustment:125 mm material width of feeder:550 mm material thickness of feeder:0 - 6,0 mm feed length:350 mm material cross-cut:1100 mm² Feed speed:50 m/min power requirement:45,0 kW weight:25,0 t dimensions (WxDxH):2,3 x 2,1 x 4,7 m infinitely variable drive:PIV overload protection in ram:hydraulic ram adjustment:motoric ram counterbalance:pneumatic pincer feed:mechanisch, RS 350/550 SL 90
pressure:125 t throat:340 mm stroke:20 - 160 mm no. of strokes:55 /min distance table/ram, max. stroke up, adjustment up:480 mm table surface area:1000 x 660 mm table height over floor:730 mm ram surface:600 x 300 mm ram adjustment:75 mm power requirement:8,5 kW weight:7,8 t dimensions (WxDxH):1,4 x 2,8 x 2,7 m German Safety: permitted for manual loading:UVV 11.062 - VBG 7n5.1 clutch:pneumatic overload protection in ram:mechanical
pressure:125 t distance between columns:2100 mm stroke:1000 mm Distance table/ram, max. stroke up, adjustment up:1300 mm Table area:2230 x 1300 mm die cushion pressure in table:63 t die cushion stroke in table:60 mm surface of drawing cushion:1000 x 900 mm table height above floor:1050 mm side window:1000 mm ram surface:2100 x 1000 mm speed down:50 mm/s speed up:50 mm/s working speed:10 mm/s oil volume:410 l height above floor:5,95 mm power requirement:22,0 kW Weight:31,0 t Dimensions (WxDxH):3,1 x 1,7 x 5,95 m German Safety: permitted for manual loading:UVV 11.064 - VBG 7n5.2 drawing cushion in table:hydraulic foundation pit:not necessary
Press capacity: 125 ton Ram stroke adjustable: 30 - 120 mm Slide adjustment: 100 mm Shut height (stroke down, adjustment up): 450 mm Free frontal opening L-R: 1.290 mm Free lateral opening F-B: 450 mm Table surface area : 1.250 x 800 mm Slide area: 1.250 x 650 mm Hole in table: 1.050 x 260 mm Number of strokes: 30 - 220 s.p.m. Table height over floor: 1.200 mm Required power: 39 kW Height over floor approx.: 3.800 mm Dimensions L x W x H: 3.500 x 2.200 x 3.800 mm Weight of machine approx.: 21,5 ton
: neu : ca. 6 Monate ab Auftragse : Taiwan : 30100 € : 574.91 € : 50 mm : MK 5 : 360 - 1.250 mm : 44 - 1.206 (12) U/min : Stahl/Guß: M40/M50 : 2060 mm : 995 mm : 2240 mm : 2300 kg : 441 - 1.345 mm : 0,06 - 0,2 (3) mm/min : 3.7 kW : 300 mm : 270 mm : 1.785 x 785 x 190 mm : 0,75 kW : 635 x 520 x 420 mm : 2645 mm : 0,75 kW left/right rotation automatic feed drilling depth limit manual headstock adjustment with hydraulic clamping electric height adjustment of extension arm andhydraulic clamping hydraulicclamping of swivel movement of extension arm central operation panel on the front side power load readout for drilling spindle hand wheel for spindle fine feed coolant equipment machine lamp box table machine and equipment according to the CE-regulations operating manual in GERMAN and ENGLISH The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: neu : ca. 4 Monate ab Auftragse : Italien : 104000 € : 1965.6 € : 125 to : 500 mm : 1200x700 mm : 600 mm : 115 mm/s : 7 mm/s : 70 mm/s : 15 kW : 2550 mm : 1500 mm : 2600 mm 4-pillar guide table and ram with T-slots 2 hand operation stroke adjustment pressure adjustment The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: neu : ca. 12 Wochen ab Auftrags : Türkei : 8200 € : 158.26 € : 1250 kg : 1300 mm : 450 - 550 mm : 400 mm : 50 mm : 80 mm motorized drive mechanical adjustable coil mandrel with 4 jaws speed control for decoiling speed aswell as acceleration- and deceleration times photoelectric proximity ensor SICK for sag control Alternative: Variant with pneumatic pressure arm (CMC P3 1250 400 M D1300) € 10.900,-- The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: neu : 2024 : 2517 : prompt, Zwischenverkauf v : Deutschland : 36720 € : 701.35 € : 1 : 1500x3000 mm : Hypertherm Powermax 125 : 25 mm : 25 mm : 57 mm : 25 mm : 125 A : 24 m/min : 1/10 mm : 400 kg/m² : 3560 mm : 1960 mm : 1500 mm : 650 kg DEMO MACHINE compressed air powered plasma sourceHYPERTHERM Powermax 125 CNC-workbench software (external PC not included) Height adjustment by arc voltage Set-up laser precision profile rail guide(HiWin) zero backlash HTD drive belt driven by step motors solid frame construction seperate renewable support grate water trough to catch flying sparks hand operation unit for comfortable processing and set up on the workpiece users manual in GERMAN according to CE rules INCL. FOLLOWING OPTION: Suction bridge (prepared for suction diam. 160 mm) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
grinding diameter: ca. 250 mm grinding length: 200 mm centre height: 85 mm total power requirement: kW weight of the machine ca.: 2,5 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Kemper 360 JD 6 – 8-row maize header for John Deere – built in 2001 Manufacturer: Kemper GmbH & Co. KG Type: 360 JD 6 Year of Make: 2001 Machine No.: 168 / 100957 Weight: approx. 2,680 kg Made in Germany Suitable for John Deere forage harvesters. Equipment / Execution • 8-row maize header • Foldable • Star promoters • Row divider with long tips • Robust construction • Mechanical drive Condition • Used, fully functional • Star wheels and infeed in neat condition • Signs of wear and tear due to age and use • No obvious repair backlog The last machine was in use (use can be seen in the video). Kristina Kreimer – Surplex / TBAuctions E-mail: k.kreimer@tbauctions.com Phone: +49 151 55771219 Auction-ID: A7-45490-15
Measuring table, measuring plate with measuring column and dial gauge holder PAGUS measuring range: 180 mm working surface: 125 x 125 mm working height: 54 mm projection: 140 mm in wooden box New ! still preserved ! Dimensions: 310 x 250 x 160 mm
Pneumatic cylinder FESTO DVG-50-125-PPV VDMA 164456 M708 stroke: 125 mm Rod diameter Ø 20 mm Dimensions: 310 x 70 x 65 mm
Pneumatic cylinders, flat cylinders FESTO DZF-63-125-A-P-A 161314 stroke: 125 mm rod diameter Ø 20 mm New ! Dimensions: 250 x 127 x 50 mm
Pneumatic cylinder with position sensors FESTO DNC-50-125-PPV-A 163374 stroke: 125 mm rod diameter Ø 20 mm with fasteners ! Dimensions: 450 x 75 x 70 mm
Pneumatic cylinders, standard cylinders FESTO DNG-32-125-PPV-A 36326 stroke: 125 mm rod diameter: Ø 12 mm pmax: 12 bar New ! Dimensions: 280 x 50 x 50 mm
Workbench PAGUS 1250 x 1250 mm Board thickness: approx. 50 mm height: 870 mm used, tested ! Dimensions: 1250 x 1250 x 870 mm
Workbench with vise PAGUS 1250 x 1250 mm Plate thickness: approx. 50 mm height: 870 mm vice < -br /> LINEN JUNIOR jaw width: 125 mm span: 190 mm used, tested ! Dimensions: 1250 x 1250 x 1150 mm
Featured; Tow bar; 7-pin plug; Kitchen block with 3 burner stove; Crane; 4- Seater sofa; Lifting roof; 2-P bed. Bench for in; Stove; Radio CAUTION! This vehicle has a license plate registration, when you pick it up you must register it on the spot with a third party or export it, there are additional costs involved) Please note; Clutch defective Auction-ID: A1-42014-225
Capacity: 125 ton, Strokes per minute: 85-500 / min, Slide: 870 x 550 mm, Plate width: 260 mm, Year of manufacturing: 1980
Electric chain hoist, crane, indoor crane, assembly crane -Load capacity: 125 kg -Main stroke: 8 m/min -Hakenweg: 5 m -Control switch -Weight: 25 kg
Cutter head, milling chuck, carbide cutter, indexable insert cutter -Diameter: 125 mm -Number of teeth: 9 -without indexable inserts: Carbide -Hole: Ø 40 mm -Number: 2x milling cutters available Price: per piece -Dimensions: -Weight: 2.6 kg
Gear motor, electric motor -Speed: 125 rpm -Power: 0.37 kW -Construction: B3 -Diameter shaft: Ø 22 mm -Protection class: IP 44 -Number: 1x motors available -Price: per piece -Dimensions: 365/160/H200 mm -Weight: 12.8 kg
Gear motor, electric motor -Speed: 125 rpm -Power: 0.55 kW -Construction: B3 -Shaft: Ø 25 mm -Protection class: IP 44 -Dimensions: 525/200/H160 mm -Weight: 20.7 kg
Gear motor, electric motor -Speed: 125 rpm -Power: 0.6 kW -Construction: B5 -Diameter shaft: Ø 24 mm -Protection class: IP 44 -Dimensions: 365/160/H215 mm -Weight: 19 kg
Gear motor electric motor -Speed: 125 rpm -Power: 0.44 kW -ED: 60% -Construction: B5 angle -Diameter shaft: Ø 25 mm -Protection class: IP 44 -Brake -Dimensions: 410/260/H225 mm -Weight: 22 kg
Gear motor, electric motor -Speed: 125 rpm -Power: 0.55 kW -Construction: B3 -Shaft: Ø 30 mm -Protection class: IP 54 -Weight: 27 kg
Gear motor, electric motor -Speed: 125 rpm -Power: 0.37 kW -Construction: B3 -Shaft diameter: Ø 30 mm -Protection class: IP 44 -Number: 3x motors available -Price: per piece -Dimensions: 445/230/H200 mm -Weight: 23 kg
Starting resistor, series resistor, resistor -for testing large electric motors -Power: 125 A -with control cabinet -3x amps display 250 amps -(technical data see photos) -Dimensions: 720/800/H1000 mm -Weight: 128 kg
maximum number of results exceeded
please refine your search
300 € 
