kemper 125 used for sale

PVS 125 H Micro-cut Drive 15 KW 400 Volt 50 Hz Horizontal design with trrichter Funnel volume approx. 120 liters

Bending tool, die, upper knife, upper tool, straight tool -Tool: for press brake, 4 pieces -Tool angle: 40° -Dimensions/lengths: see drawing in the photos -Transport dimensions: 1000/130/H70 mm -Total weight: 32.1 kg

Conveyor belt rollers, transport rollers, replacement rollers, conveyor belt, roller conveyor, support rollers -Conveyor belt rollers: transport rollers diameter 60 mm -Total length: 1250 mm -Shots: M10 -Quantity: 1x transport rollers available -Dimensions: Ø 60 x 1250 mm -Weight: 5,7 kg

Thickness gauge, coating thickness gauge -Manufacturer: PCE, thickness gauge with case -Type: PCE-CT 27FN -Measuring range: 0 - 1250 µm -Accessories: see photos -Dimensions: 250/210/H55mm -Weight: 0.7 kg

castor, swivel castor, transport equipment castor, fixed castor, heavy-duty castor -Swivel castor: with lock/brake -Wheel: Ø 125 mm -Width: 32 mm -Hole spacing: 78 x 60 mm / Ø 10 mm -Number: 216x swivel castors available -Price: per piece -Dimensions total: 175/80/H155 mm -Weight: 1.1 kg/piece

clutch, power clutch, gear clutch, transmission clutch -Clutch: Gear clutch with duo sealing rings -Hole shaft: Ø 125 x 125 mm -Flange: bolt circle Ø 265 x 13 mm -Dimensions: Ø 294 x 125 mm -Weight: 26.8 kg

clutch, power clutch, gear clutch, transmission clutch -Clutch: Gear clutch with duo sealing rings -Hole shaft: Ø 125 x 125 mm -Flange: bolt circle Ø 265 x 13 mm -Dimensions: Ø 294 x 125 mm -Weight: 27,1 kg

strapping machine, packaging machine, strapping device, strapping set, unwinding trolley, strap dispenser, cutting stand, vertical cutting stand -Manufacturer: HAVA, cutting stand cutting device on mobile base frame -Cutting width: up to 1250 mm -Roll diameter up to 850 mm -Dimensions: 1655/730/H1150 mm -Weight: 22 kg

Micrometer screws, micrometer screws, outside micrometers, outside micrometers -Manufacturer: Steinmeyer, micrometer -Measuring range: 125-150 mm -Reading: 0.01 mm -locking device -other sizes: also available -Case dimensions: 335/180/H30 mm -Weight: 0,9 kg

Micrometer screws, micrometer screws, outside micrometers, outside micrometers -Micrometer: outside micrometer -Measuring range: 100-125 mm -Reading: 0.01 mm -locking device -other sizes: also available -Case dimensions: 315/160/H30 mm -Weight: 1.0 kg

tool holder, milling holder, milling tool, adapter, intermediate sleeve, extension adapter -Manufacturer: Sandvik Coromant, milling adapter Ovp -Type: C8-391.01-80 125A -Mounting diameter: 80 mm -Functional length L: 125 mm -Transport dimensions: Ø 80 x 173 mm -Weight: 4.5 kg/total

machine vice, stable vice, drill press vice -Machine vice: clamping jaws 175 x 50 mm -Clamping depth: 125 mm -Dimensions: 520/200/H125 mm -Weight: 44.7 kg

Available in stock 1 x Used Injector Nozzle Test Stand. Use the injector nozzle test stand to verify the shape and atomization of the injected test fluid and to leak test the needle seating. The equipment is used but in good working conditions.

Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams, swivel cylinders -Manufacturer: Orsta, double-acting hydraulic cylinder stroke 125 mm -Type: B2-50/32x125 TGL10906 -Piston rod: Ø 32 mm / M18 -Holes: Ø 30 mm -Dimensions: Ø 80 x 375 mm -Weight: 6.3 kg

Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams, swivel cylinders -Manufacturer: Orsta, double-acting hydraulic cylinder stroke 125 mm -Type: B1-50/22-125 TGL 10906 -Piston rod: Ø 22 mm / M18 -Hole: Ø 32 mm -Dimensions: Ø 77 x 345 mm -Weight: 5.2 kg

Cutting range round 0°: 127 mm Cutting area flat 0°: 125 x 130 mm Cutting range round 45° right: 90 mm Cutting area square 45° right: 90 x 90 mm Cutting range approx. 60° right: 45 mm Cutting area square 60° right: 45 x 45 mm Vice opening: 130 mm Band saw blade dimensions: 1440 x 13 x 0.65 mm Cutting speeds: 30 - 80 m/min Motor power: 0.55 kW Voltage: 230 V Weight approx.: 25 kg Characteristics: - Two cutting speed levels for optimal adaptation to the workpiece - For miter cuts, the saw bracket can be swivelled up to 60° - Including workpiece stop for rational work - Optimum cutting results thanks to band saw blade guide with ball bearings - High-torque engine, even under continuous load - Under load, the motor electronics keep the cutting speed largely constant - Environmentally friendly, as there is no need for lubricating and coolant fluids - Smooth, low ...

Bohrleistung in Stahl (-Ø: 45 mm throat: 1250 mm workpiece height max.: 1100 mm swival range +/-: 360 ° height adjustment: 745 mm base plate surface area: 1450 x 920 mm Bohrspindel-Ø/ Aufnahme: 90 mm / MK 5 bore spindle stroke: 355 mm max. torque on the spindle: 250 Nm feed power: 14000 N turning speed range: 20 - 1200 U/min feed range: 0,063 - 0,63 mm/U power capacity: 3,7 kW weight of the machine ca.: 3,0 t dimensions of the machine ca.: 2,1 x 0,9 x 3,3 m • cube table 650 x 650 x 500 mm, • coolant device The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams, swivel cylinders -Manufacturer: Orsta, double-acting hydraulic cylinder stroke 125 mm -Type: B2-40/18x125 Pn16 TGL 29017/5/ -Piston rod: Ø 18 mm / M16 -Holes: Ø 20 mm -Dimensions: Ø 340 x 60 mm -Weight: 3.2 kg

Suspension clamp, helmet rail holder, helmet rail, running rail, rail holder, clamping sleeve, sliding gate sleeve -Manufacturer: Helmet, running rail helmet rail -Type: Profile 500 -Length: 125 mm -Dimensions: see photos -Quantity: 1x helmet rail available -Dimensions: 125/65/H60 mm -Weight: 0.7 kg

PVS -Micro-Cut or emulsifiers. Formerly called Kolidmühle For shredding various products Production of emulsions Pastes Sauces Soups and various other products Capacity up to 150 litres Motor power 15 KW

PVS 125 HL Emulsifier 160 litre hopper

Pendulum jaw with 125mm width and 160mm width available Strongest version on the market! Extremely flexible.

Pendulum jaw for 125mm width and 160mm width Extremely flexible. Strong execution.

Forklift bucket, hydraulic forklift bucket, light material bucket, tipping bucket, container tipper, forklift tines, forklift forks, fork tines -Forklift tines: 2 pieces/1 pair -Length: 1400 mm -Cross-section: 125 x 45 mm -Recording: see photos -Transport dimensions: 1520/560/H125 mm -Total weight: 148 kg

Micrometer screws, micrometer screws, outside micrometers -Micrometer: outside micrometer -Measuring range: 100-125 mm -Reading: 0.01 mm -Locking device -other sizes: also available -Case dimensions: 320/180/H40 mm -Weight: 0.9 kg

Three-jaw chuck, three-jaw lathe chuck -Manufacturer: TOS, three-jaw chuck chuck size Ø 125 mm -Passage: Ø 35 mm -Bolt circle: Ø 108 mm -Accessories: incl. 2nd set of interchangeable jaws -Dimensions: Ø125 x 70 mm -Weight: 4.1 kg

Castor, swivel castor, transport equipment castor, fixed castor, heavy-duty castor -Swivel castor: solid rubber with steel rim, 2 pieces -Load capacity: 100 kg -Wheel: Type 125/37.5-50 Ø 125 mm -Width: 37 mm -Shipping/Price: complete -Dimensions each: 140/105/H155 mm -Weight: 1.2 kg/piece

Column Mounted Crane KONECRANES Capacity: 125 KG Year of construction: 2009 Height under hook: 2,5 meters max Machine delivered with: 1 rudder (Max capacity: 100 KG) Total length: 5 meters

V-belt pulley, belt pulley, double-wheel pulley -V-belt pulley: 2-groove pulley type SPZ Ø 125 mm -V-belt width: 10 mm -Hole: Ø28 mm -Dimensions: Ø125 x 55 mm -Weight: 0.6 kg

Machine vice, sturdy vice, drill press vice -Machine vice: Clamping jaws 130 x 30 mm -Clamping depth: 125 mm -Dimensions: 405/130/H105 mm -Weight: 18.7 kg

Capacity, ton 1250 Stroke, mm 500 Maximum drawing depth,mm 200 Min number of no-load stroke: 14 /per min Slider adjustment, mm 315 Max. shut height between bolster plate and slider (stroke down, adjustment up), mm 1250 Table size, mm 1600 x 1800 Slider size, mm 1530 x 1800 Aperture in a table, mm 1100 x 1100 Distance between columns, mm 1600 Cushion travel, mm 200 Cushion capacity, ton 200 Maximum push force ton 31.5 main motor power, kW 125 Press overall dimensions: 5850x3100x8950 mm Press weight, kg 195000

Hook, retaining arm, retaining bracket -Hook: Holding arm -Load capacity: 125 kg -Number: 2 hooks available -price: per piece -Dimensions: 800/325/H125 mm -Weight: 9.4 kg/pc.

Two-jaw chuck, 2-jaw chuck, vise, faceplate -Mouth size: Ø 125 mm -exciting: centric -Replaceable jaws: soft -Weight: 6 kg

Two-jaw chuck, 2-jaw chuck, vise, faceplate -Mouth size: Ø 125 mm -exciting: centric -Replaceable jaws: soft -Cone mounting: Ø 82 mm -Bolt circle: Ø 105 mm -Weight: 14 kg

Pipe clamping system, clamps for butt welding machine, butt welding machine, mirror welding machine, pipe welding machine, assembly device for pipes -Holes diameter: 90/105/125/160 mm -Angle: adjustable -Double clamping device: for pipe mounting -Weight: 65 kg

Cutter head, milling chuck, carbide cutter, indexable insert cutter -Diameter: 125 mm -Number of teeth: 6 -Indexable inserts: Carbide -Recording: SK50 -Weight: 10 kg

Clamping plate with T-slots, plate field, welding table, welding table, plate boring machine, T-slot plate -Intermediate plate: for hydraulic press eccentric press -Width: 1630 mm -Length: 1250 mm -Height: 100 mm -Plate: Solid -Groove width: 22 mm -Weight: approx. 1000 kg

Pneumatic cylinder, air cylinder, pneumatic piston, air piston -Type: DZF-40-125-APA-S2 -Air inlet and outlet: adjustable -Weight: 1.3 kg

Gear motor Flender MBH 125CC-B 27.7/1 Bevel helical gear drive motor 11 kW at 1400 1/min. 230/400 V, 50 Hz, IP 55 were operated with frequency converters Matching Freqenzumrichter Walther Flender ZZ0103069.34003 Sinus Penta available A total of 15 traction motors and 12 drives ! available Very good condition, straight from production!

End mill, roller cutter, milling cutter, disc cutter, slot cutter -Manufacturer: Schuler, end mill cutters, disc cutters -Type: 125Wx12x32 HSS K10 -Hole: Ø 32 mm -Quantity: 1x milling cutter available -Dimensions: Ø 125 x 12 mm -Weight: 0.5 kg

SCHAUBLIN 125 High precision lathe Diameter over the bed 270 mm Diameter over cross slide 120 mm Height of centers 125 mm Bed length 1000 mm Distance between centers 500 mm Spindle speed 45-3000 rpm Spindle nose Camlock D1-3 " Rapid traverse of the carriage 440 mm/min Longitudinal stroke 90 mm Cross travel 130 mm Vertical power feed 4-260 mm/min Metric threads 0.25-3.5 mm Spindle for collets B32 Tailstock cone MK 2 English pitches 112-6/1″ Special pitches 0.25-8 mm Top slide travel 100 mm Cross slide travel 180 mm Dimension 1500 x 850 x 1300 mm Weight approx. 950 kg

GeneralCTX beta 1250 4A Two spindle turning centre with - partial hollow clamping device for main spindle and counter spindle internal diameter of draw tube Ø67 mm (2.63 in) x 700 mm (27.55 in) deep - 2 C-axes and spindle brakes (hydr.) - 2 12 fold Sauter star turrets reception VDI 40, DIN 69880-40 with precision interface (Trifix) and tool drive connection/drive acc. DIN 5480 - Y-axis, slide I - counter spindle slide; Control: CELOS X with Siemens 840D SL Operate Headstock, leftClamping chuck Ø315 mmSpindle nose diameter170h5 mmSpindle diametre on front bearing130 mmSpindle bore87 mmDrive power (100% DC)25 kWTorque (100% DC)280 NmSpeed range0-5000 rpmC-Axis Speed2000 rpmHeadstock, rightClamping chuck Ø315 mmSpindle nose diameter170h5 mmSpindle bore87 mmSpindle diametre on front bearing130 mmDrive power (100% DC)25 kWC-Axis Speed2000 rpmTorque (100% DC)280 NmSlide 1Longitudina ...

End mill, roller cutter, milling cutter, disc cutter, slot cutter -Cylinder end mill: Disc cutter 99.6 kg -Type: various versions -Price/Fee: complete -Transport dimensions: 790/600/H210 mm -Weight: 99.6 kg

Inv. Num. : 6637 Type: SRM 125-4000 Producer: Škoda Generated: Parameters: Control system: SIEMENS SINUMERIK 828 D Maximum turning length: 4000 mm Maximum turning diameter over bed: 1250 mm Maximum turning diameter over support: 900 mm Maximum workpiece weight: 14000 kg Turning diameter: 1030 mm Travel speed of the Z-axis and X-axis: 2000 mm/min Rapid traverse X: 3000 mm/min Rapid traverse Z: 6000 mm/min Equipment: Feed drives Siemens DRO Heidenhain

Metal Powder Preformer Technical Specifications: Model Designation 1250 kN PELLETER Modes of Operation Automatic Configuration Single Station Design Self-contained Direction of pressing Horizontal Material loading Automatic Material Unloading Semi-automatic Drive Self-contained Main Ram Pressing Force (max) 1250 kN 125 Tons Main Ram Pressing Force (min) 125 kN 12.5 Tons Main Ram Stroke (max) 105 mm 4.13 ins Max Hopper & Die Stroke 270 mm 10.63 ins Max Fill Length 120 mm 4.72 ins Min Fill Length 25 mm 1 ins Hydraulic Oil Specification ISO VG46HM Oil Tank Capacity 300 Ltrs 66 Galls Hydraulic ...