Kaiser Press 50to -Exhibition machine / zero operating hours -Electro-hydraulic drive -Actuation: foot pedals and push buttons on the control panel -Compressive force max.: 50 tons -Power consumption: 0.75 kW -Voltage: 230 V -Frame width: 930 mm -Maximum frame width incl. hand crank and electrical unit: 1300 mm -Total height: 1900 mm -Cylinder stroke: 145 mm plus 60 mm lead screw -Usable width – working area inside: max. 750 mm -Usable height – working range: 0 mm to 780 mm -Depth of the frame: 220 mm -Total depth with foot: 535 mm (attachment to the ground possible) -Support depth of the height-adjustable work table (cross beam): 245 mm -Cross beam adjustable in 6 positions (hole spacing: 140 mm) -Height adjustment of the cross beam via hand crank (no manual lifting necessary) -Hydraulic unit can be moved laterally: 300 mm (ball bearing in the upper guide area) ...
Roller feed KAISER ZR 12 Belt width - 120 mm Feed length 100 mm Feed angle - adjustable - 90 - 180 degrees Tech. Condition - good, complete With pneumatics. Spare parts Btto 250 kg
Press capacity: 125 ton Ram stroke adjustable: 30 - 120 mm Slide adjustment: 100 mm Shut height (stroke down, adjustment up): 450 mm Free frontal opening L-R: 1.290 mm Free lateral opening F-B: 450 mm Table surface area : 1.250 x 800 mm Slide area: 1.250 x 650 mm Hole in table: 1.050 x 260 mm Number of strokes: 30 - 220 s.p.m. Table height over floor: 1.200 mm Required power: 39 kW Height over floor approx.: 3.800 mm Dimensions L x W x H: 3.500 x 2.200 x 3.800 mm Weight of machine approx.: 21,5 ton
Press capacity: 35 ton Ram stroke adjustable: 6 - 50 mm Slide adjustment: 50 mm Shut height (stroke down, adjustment up): 250 mm Free frontal opening L-R: 430 mm Table surface area : 410 x 410 mm Slide area: 307 x 187 mm Hole in table: 170 x 110 mm Number of strokes: 60 - 300 s.p.m. Weight of machine approx.: 2,4 ton
pressure:063 t stroke:70 fix mm no. of strokes:15 - 60 /min distance between columns:1340 mm width between oil collecting pans:1180 mm distance table/ram, max. stroke up, adjustment up:328 mm table surface area:1260 x 700 mm hole in the table:1000 x 100 mm table height over floor:1000 mm column travel -side:470 mm ram surface:1300 x 650 mm ram adjustment:100 mm power requirement:27,5 kW weight:13,7 t Dimensions (WxDxH):3,4 x 2,1 x 3,4 m clutch:pneumatic overload protection in ram:hydraulic ram counterbalance:pneumatic ram adjustment:motoric
Tool holder, milling holder, milling tool -Number: 8x SK50 mounts -different designs -Brill chucks: flat chucks, reducing sleeves, cutter head, shell end mill, spindle tool -suitable for tool changers -is only sold complete -Weight: 32 kg
Tool holder, milling tool holder -Number: 14x SK50 recording -Tool holder: Ø 36 mm -Drill chucks: Surface clamping chucks, reducing sleeves, cutter heads, end mills, spindle tools -suitable for tool changers -Price/Sale: complete -Dimensions: 800/315/H650 mm -Weight: 62 kg
Tool holder, milling holder, milling tool -Number: 3x SK50 holders -different designs -Bore chucks, flat chucks, reducing sleeves, cutter heads, shell end mills, spindle tools -suitable for tool changers -Sale: only complete -Weight: 10 kg
Boring head, spindle head, drill head, plunge drill head, plunge head, spindle drill head, boring head, spindle tool -Quantity: 2x spindle tools -Recording: SK50 -Spindle dimensions: 145-230/225-310 mm Price: complete -Weight: 14 kg/piece
PRESS DESIGN drive system: eccentric / crank frame design: H-frame, tie rod openings in uprights: yes table cushion: yes feedstock transport direction: left to right PRESS FORCES total force (nominal): 200 to PRESS TABLE table surface (left-right): 1780 mm table surface (front-back): 1300 mm opening in bed (left-right): 1445 mm opening in bed (front-back): 260 mm SLIDE slide force: 200 to table surface (left-right): 1500 mm table surface (front-back): 1100 mm stroke: 178 mm stroke rate (max.): 120 /min SLIDE (MECHAN. PRESS) slide adjustment: 150 mm stroke rate (min.): 20 /min stroke rate (max.): 120 /min DIE CUSHION (TABLE CUSHION) number of cushions: 11 & ...
1 punching machine (14), manufacturer Kaiser, type KSTU 3500-25-6P, year of manufacture 2000, press force 350 t, stroke rate 20-100/min, stroke height 40 - 250 mm, ram adjustment 200 mm, installation height 700 mm, table size approx. 1,000 x 2,700 mm, control system, manufacturer Siemens, type Simatic Multipanel (retrofitted), force measuring unit, manufacturer Brankamp Marposs, type Prokos X1, two-hand operation, material discharge belt, downstream incline conveyor, coil unwinding reel, manufacturer Dreher, type 2380P, year of manufacture 2000, SN 0051, alignment unit, buffer section, belt feed, manufacturer Dreher, separate switch cabinet system, manufacturer Rittal, cooling unit, accessories: workbench, partition lighting, pull-out cabinet, swivel chair Find more here - / Contact us at -
Press capacity: 63 ton Ram stroke adjustable: 8 - 60 mm Slide adjustment: 80 mm Shut height (stroke down, adjustment up): 300 mm Table surface area : 810 x 550 mm Slide area: 700 x 420 mm Hole in table: 550 x 140 mm Distance between oil tray: 700 mm Table height over floor: 920 mm Number of strokes: 65 - 400 s.p.m. Weight of machine approx.: 8 ton Dimensions L x W x H: 2935 x 1170 x 3000 mm Main Motor: 11 kW
Press capacity: 100 ton Ram stroke: 300 mm Slide adjustment: 125 mm Shut height (stroke down, adjustment up): 600 mm Free frontal opening L-R: 2.020 mm Free lateral opening F-B: 620 mm Table surface area : 2.000 x 1.000 mm Slide area: 2.000 x 900 mm Hole in table: 1.700 x 300 mm Number of strokes: 10 - 50 s.p.m. Table height over floor: 1.200 mm Required power: 39 kW Height over floor approx.: 4.400 mm Dimensions L x W x H: 5.166 x 2.500 x 4.400 mm Weight of machine approx.: 38 ton
Press capacity: 40 ton Ram stroke adjustable: 8 - 50 mm Slide adjustment: 50 mm Shut height (stroke down, adjustment up): 310 mm Free frontal opening L-R: 820 mm Table surface area : 810 x 450 mm Slide area: 720 x 350 mm Hole in table: 600 x 110 mm Number of strokes: 100 - 1.000 s.p.m. Table height over floor: 1.030 mm Required power: 19,5 kW Weight of machine approx.: 6,8 ton
Press capacity: 50 ton Ram stroke: 54 mm Slide adjustment: 80 mm Shut height (stroke down, adjustment up): 303 mm Table surface area : 810 x 550 mm Number of strokes: 65 - 400 s.p.m. Weight of machine approx.: 7,5 ton Main Motor: 11 kW
Press capacity: 40 ton Ram stroke adjustable: 8 - 50 mm Slide adjustment: 50 mm Shut height (stroke down, adjustment up): 290 mm Free frontal opening L-R: 600 mm Free lateral opening F-B: 190 mm Table surface area : 600 x 500 mm Slide area: 600 x 400 mm Hole in table: 500 x 110 mm Number of strokes: 65 - 400 s.p.m. Table height over floor: 1100 mm Required power: 32 kW Height over floor approx.: 2.800 mm Weight of machine approx.: 6,2 ton
Pressure total: 315 ton Ram stroke: 160 mm Slide adjustment: 100 mm Shut height (stroke down, adjustment up): 1.050 mm Free frontal opening L-R: 2.740 mm Free lateral opening F-B: 1.500 mm Distance between oil tray: 2.400 mm Table surface area : 2.740 x 1.800 mm Slide area: 2.400 x 1.700 mm Number of strokes: 10 - 60 s.p.m. Required power: 75,5 kW kW Working hours machine: 77.341 h Height over floor approx.: 5.500 mm Dimensions L x W x H: 5.400 x 3.300 x 5.700 mm Weight of machine approx.: 80 ton Control: Siemens S5
pressure: 25 t no. of strokes: 60-300 Hub/min sheet width: 150 mm ram - range of adjustment: 6-50 mm table surface area: 350x400 mm ram surface: 250x250 mm hole in the table: 130x150 mm weight of the machine ca.: 3 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 63 t stroke: 10-80 mm no. of strokes: 65-400 Hub/min ram - range of adjustment: 80 mm table surface area: 1030x550 mm ram surface: 920x450 mm hole in the table: 700x200 mm : 420 mm weight of the machine ca.: 10 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
