ka used for sale

bore capacity in steel (diameter): 40 mm throat: 290 mm bore stroke: 130 mm spindle taper: SK 40 spindle turning speed range: 75 - 3200 U/min : 500 mm : 230 mm table surface area: 720 x 210 mm connected load frequency: 400 V diameter of hob: max. 80 mm total power requirement: 1,1 kW weight of the machine ca.: 0,35 t dimensions of the machine ca.: 1,1 x 0,9 x 1,2 m domestic equipments • Digital display • Digital depth gauge for quill • Adjustable guides with wedges • Large 12-speed range from 75 to 3200 rpm • Smooth running due to hardened and ground gears running in an oil bath • • Right-left rotation • Prismatic guides in all axes • Gear head can be swiveled 90 ° • Chip protection with safety circuit Machine base optional. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 660 mm turning diameter over slide rest: 420 mm turning length: 2000 mm turning diameter in the gap: 840 mm turning speeds: 36 - 1600 U/min centre height: 330 mm spindle bore: 103 mm tailstock quill taper MT: 5 MK tailstock travel: 150 mm tailstock quill diameter: 75 mm total power requirement: 11 kW weight of the machine ca.: 3,2 t dimensions of the machine ca.: 3,6 x 1,1 x 1,45 m Center lathe with - 3-jaw chuck F 315 - Fixed tailstock top - Multifix holder - 2-axis digital display - Fixed Lynette 180 mm - Coolant system - rapid traverse The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel (diameter): 32 mm throat: 320 mm bore stroke: 155 mm spindle taper MT: 4 MK table:: 500 x 420 mm column diameter: 120 mm turning speeds: 125 - 3030 U/min feeds: 0,1 - 0,2 - 0,3 mm/U total power requirement: 1,2 kW weight of the machine ca.: 540 kg. range L-W-H: 0,8 x 0,55 x 2,2 mm • machine base for clamping high workpieces • Digital Depth Gauge • Gearbox swivels 180 ° • silent running through geärtete, ground oil-cooled gears • Tapping Function • electromagnetic clutch for drill feed • automatic feed • electric drive for table height adjustment The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

5 warp knitting machines Karl Mayer: 1 electronic machine - 2015, Italy 3 machines - 2015, Italy 1 machine - 1998, Germany

sheet width: 1275 mm plate thickness: 3 mm strokes per minute until: 35 cutting angle: 2,0 ° table height over floor: 870 mm thickness at Niro-steel: 2 mm total power requirement: 3 kW weight of the machine ca.: 875 kg range L-W-H: 1,7 x 1,68 x 1,1 m Electric 380 Volt: Back stop with manual adjustment: Shadow line lighting: Foot switch: Piece counter: Squaring arm: Support arms: The guillotine shears type SMP is a well-dimensioned machine with all-welded gate guides. The drive takes place with a standard geared brake motor via a chain connection to the main axis. The knives are of the highest quality. The optimal cutting angle ensures together with the rubber-coated sheet metal holder, perfect cuts. Bearings and guides are maintenance-free and lubrication-free. Standard equipment: • Back gauge 635 with mm scale. • Cutting line lighting. • Section counter. • Table extensio ...

cutting diameter: 520 mm saw band length: 6096 mm cutting width: 1,3 mm cutting range: 520x620 mm total power requirement: 6,578 kW weight of the machine ca.: 4 t dimensions of the machine ca.: 3,3 x 2,2 x 2,35 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

cutting diameter: 320 mm saw band length: 4670 mm cutting width: 580 mm total power requirement: 7,4 kW weight of the machine ca.: 3 t Sawing range, circular, max. 100 - 320 mm vertical, max. 100/100 x 320/460 mm Length of cut, min./max. 0 - 580 mm Distance from column to saw band, max. 690 mm Cutting speed, infinitely variable 16 - 160 m/min Dimensions of saw band, length x Ø approx. 4,670 x 38 mm Length of remaining pieces, automatic/single cut 100/10 mm Saw blade drive, approx. 4.4 kW Total electrical load, approx. 7.4 kW - 380 V - 50 Hz Weight, approx. 3,000 kg Accessories / Special Features: Infinitely variable speeds of saw blade motor via servo motor and STOEBER drive. Display of cutting speed on control panel. Infinitely variable settings of sawing feed with display of the current cutting speed. Workpiece counter: Number of workpieces can be preset. Selection swi ...

Machine in good technical condition, possibility of testing after agreement. Machine weight 2000kg.

Capacity: 10 tons Includes: bend adapters Foot pedal operation

diameter: 0 mm workpiece length: 1000 mm work piece width: 875 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m CNC deburring/brushing cell, tool magazine, SIEMENS 510, 5 axes CNC Controlled Flexible Brushing and Deburring Cell The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

saw blade diameter: 370 mm cutting range round: 115 mm cutting range square: 105 mm cutting length min.: 730 mm cutting range flat: 70 x 240 mm cutting lenght max.: 4000 mm saw blade turning speeds: 1250 / 2500 U/min table rotating: 180 ° stroke: 120 mm feed stepless: 0 - 500 mm/min coolant: capacity 45 degrees: square: 95 mm capacity 45 degrees: flat: 50 x 200 mm cutting speed: 1250 / 2500 m/min weight of the machine ca.: 1,1 t dimensions of the machine ca.: 5,00 x 1,30 x 2,00 m - Fabr. - No.: 28232 und 28233 - pneunatic clamping head - coolant equipment The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

saw blade diameter: 350 mm cutting diameter: 90 mm stroke: 160 mm mitter cutting - all-position: ± 45 ° turning speed range: U/min voltage: 380 V total power requirement: kW weight of the machine ca.: 350 kg dimensions of the machine ca.: 0,80 x 0,85 x 1,35 m - S/N: 4296 - pneumatic feed - coolant equipment The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

saw blade diameter: 400 mm cutting diameter: 130 mm stroke: 135 mm mitter cutting - all-position: 0-45 ° turning speed range: 1420 / 2840 U/min capacity 45 degrees: square: 110 mm capacity 45 degrees: flat: 50 x 240 mm capacity 90 degrees: flat: 95 x 240 mm capacity 90 degrees: round: 130 mm capacity 90 degrees: square: 120 mm voltage: 400 V total power requirement: 3,7 / 4,5 kW weight of the machine ca.: 600 kg dimensions of the machine ca.: 1,15 x 1,20 x 1,60 m - Serial-No.: 102752 - cutting range round 130 mm - cutting range square 120 mm - cutting range flat 95 x 240 mm - vertical pneumatic clamping The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Clamping plates: 850 x 1250 mm - Fastening of the tools via T-slots Stroke of the upper Clamping plate: 400 mm max. Opening width: 800 mm max. Tool installation height: 400 mm min. Table height: 1080 mm Clamping force: 400 kN Opening force: 480 kN Beam angle: 85° top plate Tilt range Frame: From 0° to 90°, hydraulic Plate rotation range: From -90° to +90°, manual Travel cylinder: 1 PARKER travel cylinder Force elements: 2 power elements with clamping jaws, mounted at the front Mould weight above: approx. 400 kg max. Total mould weight: approx. 1000 kg max. Valve Control: Black/White Valves for Travel Cylinders and Power Elements Core Pull Control: Without Core Pulls Hydraulic power unit: H-L 55/22 - Operating pressure max. 250 bar Control: Without control Dimensions: Mould carrier: approx. 1,600 x 1,400 x 2,000 mm (width x depth x height) Weight: appr ...

max. wheel diameter: . mm gear width: . mm max. module: . min. module: Control: total power requirement: 15 kW weight of the machine ca.: t dimensions of the machine ca.: m specifications Max. Grinding length (mm) 500 Max. Grinding diameter (mm) Ø 300 Speed 5,000 - 25,000 kW 15 Voltage 380V Hertz 50 Including: Max. auto feed 15.000 mm/min Max. feed carriage 21.700 mm /min Angle grinding head 0 - 55 degrees Helical pitch 10 - 90.000 mm Max. positioning movement of grinding head 10 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

automatic feeder: ja material length: 460 mm material width: 320 mm weight of the machine ca.: 2 t documentation: ja The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

saw blade diameter: 380 mm pneumatic clamping: ja weight of the machine ca.: 1,3 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

length: 380 mm max. band length: 430 mm weight of the machine ca.: 0,5 t : : : The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

centre distance: 1.000 mm : 380 mm documentation: ja weight of the machine ca.: 2,9 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 75 t throat: 260 mm stroke: 16-80 mm table surface area: 800 x 520 mm distance table/ram: 350 mm strokes - infinitely variable: 50 - 250 Hub/min ram surface: 400 x 300 mm ram adjustment: 70 mm total power requirement: 7,5 kW dimensions of the machine ca.: 2,7 x 1,7 x 2,6 m weight of the machine ca.: 4 t hole in the table: 260 x 180 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

This Kaltenbach KBS 1010 DG drilling and cutting profile machine was built in the year 2009. Efficient drilling, milling, marking, tapping and countersinking. It comes with a tool changer, 5 total per axis for shorter setup times.

This KAWASAKI RS006L Robot machine was manufactured in the year 2020 in Denmark. It is equipped with a Kawasaki F60 / E71 Controller and has 6 axis.

pressure: 40 t dayligth: 250 mm stroke: 8 - 50 mm table clamping surface LxW: 620 x 450 mm table height over floor: 980 mm no. of strokes: 85 - 500 Hub/min distance between columns: 680 mm ram - range of adjustment: 50 mm number of T-slots: 4 ram surface: mm total power requirement: 8 kW dimensions of the machine ca.: 2,3 x 2,2 x 2,8 m weight of the machine ca.: 5,8 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Air dryer #5381 Operating pressure: 13 - 18 bar Flow rate at 7 bar: 12,7 m3/min Voltage: 400 V Weight: 660 kg Overall dimensions: 1050 x 1550 x 1500 mm

belt press Kahl & Schlichterle 2-band press cloth width: 1.5 m capacity: up to 8 t/h with pneumatic cloth cleaning

This KASTO SSB 260 VA Sawing machine was manufactured in the year 1998 in Germany. The machine disposes of an automatic feeding and a conveyor belt for saw blades. It has a saw blade length of 4115mm, a saw band width of 34 mm and a maximum diameter of 260 mm. It is in good conditions.

This KASTO HBA 1060/1260AU band saw machine was built in the year 1995 in Germany. It is equipped with a KASTO CNC control unit. The machine has a max workpiece diameter of 1060 mm and a cutting speed of 16-80 m/min.

This KASTO cut DU 4 Sawing machine was manufactured in the year 2010 in Germany. The machine has a Cutting speed of 20 to 110 m/min.

This KASTO speed C 14 Sawing machine was manufactured in the year 2004 in Germany. It is equipped with a chip removal. Disposes of a signal lamp and a Hydraulic lift roller.

This Kadia 2PH 60/250R was manufactured in the year 2001 in Germany. It is equipped with a Kadia UCP 1500 control unit. The machine has a spindle speed of 1400 rpm. See photo and video gallery for more detailed impressions.

Power: 0 kW Working pressure maximum: 0 bar Tank volume: 0 l Capacity (l/s): 0 l/s Type: 0   Technical data Pressure: 16 bar Quantity delivered: 0.55 m3/min Voltage: 230 Volt Motor power: 5.5 kW Machine´s weight about: 270 kg Overall dimensions machine: Length: 660 mm Width: 600 mm Height: 1300 mm Various accessories: Air reservoir: 250 l

Kadia 2PH 60/350 T Vertical Honing machine was manufactured in the year 1998 in Germany. It is equipped with a KADIA UCP 1500 control unit. The machine has a spindle speed of 1400 rpm.

Kasto EBS Ø 450 mm Length of the sawblade : 700 x 55 x 2,5mm Max dia workpiece: 450 mm Length : 1915 mm Detph : 750 mm Height: 1090 mm Weight: 820 kg

Max. grinding diameter : 300 mm Max. grinding length : 450 mm Distance between centres : 700 mm Height of centres : 155 mm Tables travel : 550 mm

Kalmeijer KGM Pastry Forming Roller Standard Rollers 250mm NEW Manufacturer : KalmeijerType : KGM 250NEWDedetails see pictureOrder number : 1120.930 COMPANY NUMBER : 1120.931 REF : 1383.912 REF : 1120.910 REF : 1123.910 REF : 1120.900 REF : 1120.901 REF : 1504.900 SKU : 1120.925 REF : 1120.922 REF : 1100.936 REF : 1100.932 REF : 1100.931 REF : 1120.923 REF : 1191.900 INSTALLATION NUMBER : 1340.900 INSTALLATION NUMBER : 1123.900 APLUS pointsHeating of the figure roller, no flour sprinkling and thus better bakingChanging the figure roller without tools within one minuteBaking tray transport can be folded down, takes up little space. Kalmeijer KGM Pastry Forming Roller Standard Rollers 250mmRemovable dough feed roller, so easy to cleanAdjustable thickness of dough figures (for the right weight)Automatic ? Stop and start? (Machine comes to a stop when no more dough sheets or baking sheets a ...

bore capacity in steel (diameter): 50 mm arm length: 1250 mm workpiece height max.: mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Brand: Kao Ming Type: Lux Drill-1250 DH Year of make: 1982 Capacity: 50 mm Throat depth: 1.250 mm Spindle taper: MK5 Without drill block (is available separately) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Kalmeijer Pastry Forming Roller KGM 1380.910 Bra Manufacturer : KalmeijerType : KGM 250NEWPorpart number : 1380.910 BDedetails see pictureOrder number : 1380.910 Retail number : 1380.912 Ref : 1383.901 Ref : 1383.910 Ref : 1263.930 Ref : 1291.910 Ref : 1100.910 Ref : 1612.900 Ref : 1612.910 Ref : 1613.900 Ref : 1263.900 Ref : 1501.920 Ref : 1502.930 Ref : Special rollersPLUS pointsHeating the figure roller, no flour sprinkling and thus better baking methodChanging the figure roller without tools within one minuteBaking tray transport can be folded down, takes up little space. Kalmeijer KGM Pastry Forming Roller Standard Rollers 250mmRemovable dough feed roller, so easy to cleanAdjustable thickness of dough figures (for the right weight)Automatic ? Stop and start? (Machine comes to a stop when no more dough sheets or baking sheets are fed) Compact machine on wheelsMachine meets all CE an ...

Key data: 420 mm, 650 mm

Article number: 19-03-028 Manufacturer: Kasto Good general condition Machine workshop-tested Shipping time: All rights reserved. Year of construction: ca.1980 L x W x H: approx. 1300x800x1400mm Weight: approx. 1000kg Saw blade dimensions: approx. 650x55x2.5mm Cutting range: 90 degrees Round: approx. Ø420mm Square: approx. 300x300mm Flat: approx. 420x420mm Cutting range: 45 degrees Round: approx. Ø320mm Square: approx. 260x260mm Flat: approx. 320x260mm Mitre cut: approx. 0-45 degrees Accessories  Cutting pressure adjustable  Adjustable number of strokes  Coolant device  Footswitch  Turntable Other accessories on request Price and other technical data on request

2 cloth press 1,0 m cloth width capacity: up to max. 4 t with top fruit

Many thanks for your interest on our second hand machines, please find follow our offer: Kadema enrober with Original wooden cooling tunnel manufacturer: Kadema; Johannes Kegel Dresden Type: Juwel 305 enrober electrical: 400 VAC / 3 Ph Year of manufacturing: 1930 work width: 305 mm different: With origin wooden cooling tunnel, approx. 8m extendable mass container absolutely in original condition ! We offer this machine in 'as is' condition, without warranty EXW Hess. Lichtenau, (EXW)unpacked

Many thanks for your interest on our second hand machines, please find follow our offer: Kadema enrober antique manufacturer: Kadema; Johannes Kegel Dresden Type: Juwel 620 enrober electrical: 400 VAC / 3 Ph Year of manufacturing: maybe between 1930 - 1940 work width: 620 mm different: with wooden cooling tunnel, approx. 8m fixed mass container We offer this machine in 'as is' condition, without warranty EXW Hess. Lichtenau, unpacked

Metal Circular Saw Cold Circular Saw Manufacturer Kasto Type GKS400P YOC 1998 Saw blade 400mm coming from below automatic hydraulic vice for material expansion Top condition, ready for immediate use.

Craft Beer Brewhouse Kaspar Schulz 30hl, 4 brew/day - 2014 Complete 5-vessel brew house consisting of German Kaspar Schulz in year 2010 made 2-vessel Brew Block, one dual functioning mash tun / wort kettle and the one lauter tun (originally also dual functioning lauter tun / whirlpool) brew vessels. In year 2014 the capacity was increased by adding third Kaspar Schulz made wort kettle / whirlpool brew vessel which is steam heated with an external heat exchanger. At that time completely new brewing process control system was added and now it is fully automatic, running with Phenning Braumatik brew program installed in a Siemens S7-300 PLC. Brewing operations can be made either from a large Simens Colour Touch Screen of from connected PC. Changing recipes and creating new ones is very easy with Braumatik and can be done without any programming knowledge. Delivery includes complete brew  ...

1 aseptic Elopak filling machine line No E 5 suitable for ESL milk, UHT milk and fruit and Vegetable juice bottling. set at the moment for 3 formats Int. No.B 5, Series No. 453 Manufacturer: SHIKOKU-KAKOKI LTD Type: U-680A Year of construction 2007 with 3-lane run-off section Capacity 10,500 U/h Conveyor belts for individual packaging are manufactured by Polyketting BV Series No. 121614; Year of construction 2013 3 Elopak screw cap gluers a.) Type: PLA-S30 Manufacturer Elopak Inc. Year of construction 2005 Ref. 22111 b.) Type: PLA-S30 Manufacturer Elopak Inc. Year of construction 2007 Ref. 22121 c.) Type: PLA-S30 Manufacturer Elopak Inc. Year of construction 2007 Ref. 22122 d.) Individual packaging connection transport system from the Elopak filling machine to the 3 screw caps Gluing machines and on to the inle ...

material dimensions max. round: ​Ø 380 mm max. square: 380 x 380 mm segment length with single stroke: 10 - 510 mm with multi stroke: max. 4590 mm dimensions LxWxH: 3100 x 2200 x 1850 mm weight: 3.100 kg

Shrink Wrap/Foil Sealing

Power: 0 kW Working pressure maximum: 0 bar Tank volume: 0 l Capacity (l/s): 0 l/s Type: 0   Technical data Pressure: 16 bar Quantity delivered: 0.55 m3/min Voltage: 230 Volt Motor power: 7.5 kW Machine´s weight about: 270 kg Overall dimensions machine: Length: 660 mm Width: 600 mm Height: 1300 mm Various accessories: Air reservoir: 250 l