ka used for sale

turning diameter over bed: 560 mm turning diameter over slide rest: 355 mm turning length: 2000 mm turning diameter in the gap: 790 mm turning speeds: 20 - 1800 U/min centre height: 380 mm spindle bore: 80 mm tailstock quill taper MT: 2,8 MK tailstock travel: 150 mm tailstock quill diameter: 75 mm total power requirement: 5,5 kW weight of the machine ca.: 3,4 t dimensions of the machine ca.: 3,5 x 1,15 x 1,3 m • 80 mm spindle passage • Gears hardened and ground • manual central lubrication • adjustable main spindle bearings • Overload clutch in the lock case • bed bridge • incl. 3 - axis digital display The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel (diameter): 25 mm throat: 240 mm bore stroke: 110 mm turning speeds: 125 - 2850 U/min : 310 x 320 mm distance drilling head - clamping area: max. 650 mm total power requirement: 0,75 / 400 kW / Volt weight of the machine ca.: 0,175 t dimensions: 0,95x0,8x1,75 inkl. Tisch m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

thickness of jaw: 200 mm clamping range: 210 mm clamping height: 55 mm weight: 34,5 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 410 mm turning diameter over slide rest: 240 mm turning length: 750 mm turning diameter in the gap: mm turning speeds: 32 - 2000 U/min centre height: 210 mm spindle bore: 52 mm tailstock quill taper MT: 3 MK total power requirement: 2,2 kW weight of the machine ca.: 0,8 t Center lathe with - 3-jaw chuck F 315 - Fixed tailstock top - Multifix holder - 2-axis digital display - Fixed Lynette 180 mm - Coolant system - rapid traverse The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 250 mm turning diameter over slide rest: 130 mm turning length: 700 mm turning speeds: 115 - 1620 U/min centre height: 125 mm spindle bore: 27 mm tailstock quill taper MT: 2 tailstock quill stroke: 40 mm metric threading: 0,2 - 3,5 mm thread - inch: 8 - 56 inch. thread - module: 0,2 - 12,5 mm swival range +/-: Oberschlitten 45 ° connected load frequency: 400 V total power requirement: 0,75 kW weight of the machine ca.: 0,15 t dimensions of the machine ca.: 1,41 x 0,61 x 0,41 m Equipped with - 2-axis digital measuring system with position indicator - manufactured according to DIN 8606 - 27 mm spindle passage - adjustable guideways by adjustable strips - Strong engine with 0.75 kW - High resolution of the axis spindles for exact positioning Delivery: 3-jaw chuck 100 mm, change gear set, splash guard 3-axis digital measuring system fully assembled. The data for ...

bore capacity in steel (diameter): 40 mm throat: 370 mm bore stroke: 200 mm spindle taper MT: 4 MK table:: 580 x 460 mm column diameter: 160 mm turning speeds: 75 - 2020 U/min feeds: 0,1 - 0,2 - 0,3 - 0,4 mm/U total power requirement: 1,5 kW weight of the machine ca.: 700 kg. range L-W-H: 1,1 x 0,6 x 2,35 mm • machine base for clamping high workpieces • Digital Depth Gauge • Gearbox swivels 180 ° • silent running through geärtete, ground oil-cooled gears • Tapping Function • electromagnetic clutch for drill feed • automatic feed • electric drive for table height adjustment The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 250 mm turning diameter over slide rest: 130 mm turning length: 700 mm turning speeds: 115 - 1620 U/min centre height: 125 mm spindle bore: 27 mm tailstock quill taper MT: 2 tailstock quill stroke: 40 mm metric threading: 0,2 - 3,5 mm thread - inch: 8 - 56 inch. thread - module: 0,2 - 12,5 mm swival range +/-: Oberschlitten 45 ° connected load frequency: 400 V total power requirement: 0,75 kW weight of the machine ca.: 0,15 t dimensions of the machine ca.: 1,41 x 0,61 x 0,41 m Equipped with - 2-axis digital measuring system with position indicator - manufactured according to DIN 8606 - 27 mm spindle passage - adjustable guideways by adjustable strips - Strong engine with 0.75 kW - High resolution of the axis spindles for exact positioning Delivery: 3-jaw chuck 100 mm, change gear set, splash guard 3-axis digital measuring system fully assembled. The data for ...

bore capacity in steel (diameter): 40 mm throat: 290 mm bore stroke: 130 mm spindle taper: SK 40 spindle turning speed range: 70 - 3200 U/min : 520 mm : 230 mm table surface area: 730 x 210 mm connected load frequency: 400 V total power requirement: 1,1/1,5 kW weight of the machine ca.: 0,32 t dimensions of the machine ca.: 1,1 x 0,9 x 1,15 m domestic equipments • Digital depth gauge • Adjustable guides with wedges • Large 12-speed range from 75 to 3200 rpm • Smooth running due to hardened and ground gears running in an oil bath • • Right-left rotation • Prismatic guides in all axes • Gear head can be swiveled 90 ° • Chip protection with safety circuit Machine base optional. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 420 mm turning diameter over slide rest: 250 mm turning length: 1000 mm turning diameter in the gap: 580 mm turning speeds: 45 - 1800 U/min centre height: 210 mm spindle bore: 52 mm tailstock quill taper MT: 4 total power requirement: 4,4 kW weight of the machine ca.: 1,6 t dimensions of the machine ca.: 1,94 x 0,85 x 1,32 m Center lathe with - 3-jaw chuck F 315 - Fixed tailstock top - Multifix holder - 2-axis digital display - Fixed Lynette 180 mm - Coolant system - rapid traverse The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

thickness of jaw: 140 mm clamping range: 150 mm clamping height: 40 mm weight: 18,5 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 600 mm y-travel: 300 mm z-travel: 440 mm table-size: 1120 x 260 mm spindle taper ISO: 40 spindle turning speed range: 35 - 1600 U/min total power requirement: 2,2 kW weight of the machine ca.: 1,36 t dimensions of the machine ca.: 1,65 x 1,32 x 1,65 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 600 mm y-travel: 300 mm z-travel: 350 mm table-size: 1120 x 260 mm spindle taper ISO: 40 spindle turning speed range: 67 - 2010 U/min quill stroke: 120 mm bore capacity in steel: 40 mm total power requirement: 2,2 kW weight of the machine ca.: 1,3 t dimensions of the machine ca.: 1,58 x 1,45 x 2,15 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Control: KASTO Max.cutting range: 530 x 630 mm Cutting speed: 12 ? 120 m/min Saw band dimension: 7675 x 54 x 1.3 mm Automated bar shift: No Coolant tank:185l Chip conveyor: YES Made in Germany

Control: KASTO Max.cutting range: 400 x 400 mm Cutting speed:20 ? 110 m/min Saw band dimension: 5700 x 41 x 1.3 mm Automated bar shift: YES Coolant tank:100l Chip conveyor: YES Made in Germany

bore capacity in steel (diameter): 25 mm throat: 185 mm bore stroke: 50 mm spindle taper: MK 3 spindle turning speed range: 50 - 2500 U/min : 178 mm : 480 mm table surface area: 700 x 180 mm connected load frequency: 230 V total power requirement: 0,75 kW weight of the machine ca.: 160 t dimensions of the machine ca.: 0,75 x 0,8 x 0,9 m domestic equipments • Digital depth gauge • Adjustable guides with wedges • Large 12-speed range from 75 to 3200 rpm • Smooth running due to hardened and ground gears running in an oil bath • • Right-left rotation • Prismatic guides in all axes • Gear head can be swiveled 90 ° • Chip protection with safety circuit Machine base optional. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel (diameter): 50 mm throat: 360 mm bore stroke: 150 mm spindle turning speed range: 120 - 3000 U/min spindle taper: SK 40 : 650 mm : 320 mm vertical adjustment: 500 mm table surface area: 1000 x 300 mm connected load frequency: 400 V diameter of hob: max. 80 mm total power requirement: 2,2 kW weight of the machine ca.: 0,85 t dimensions of the machine ca.: 1,25 x 1.5 x 2,3 m New Model Industrial Drilling and Milling Machine with Manual Transmission and High Speed Range. The prism guide in the Z-axis ensures a high degree of precision even in the most difficult milling jobs. Domestic equipments: • automatic feed in X-axis • 3-axis digital display • motorized Z-axis • Feed in quill • Left-right-run high • tapping attachment • Gear head swiveling • Coolant system The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 630 mm turning diameter over slide rest: 360 mm turning length: 2000 mm turning speeds: 20 - 1120 U/min centre height: 315 mm spindle bore: 105 mm tailstock quill taper MT: 5 MK tailstock travel: 250 mm tailstock quill diameter: 100 mm travel -x axis: 370 mm travel -z axis: 1370 mm rapid traverse X-axis: 6000 mm/min rapid traverse Z-axis: 7000 mm/min bed width: 560 mm total power requirement: 11 kW weight of the machine ca.: 5,1 t dimensions of the machine ca.: 4,5 x 1,6 x 1,85 m Center lathe with - 3-jaw chuck F 315 - Fixed tailstock top - Multifix holder - 2-axis digital display - Fixed Lynette 180 mm - Coolant system - rapid traverse The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Thickness: 16 x 16 mm number: 4 Stähle weight: 3 kg dimensions: 300m x 200 x 50 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

24 gauge Jacquard loom in good condition. 150 inches 3600 needles working width 380 cm Price : On request

x-travel: 1000 mm y-travel: 300 mm z-travel: 400 mm table-size: 1320 x 360 mm spindle taper ISO: 40 spindle turning speed range: 58 - 1800 U/min total power requirement: 4 kW weight of the machine ca.: 2,3 t dimensions of the machine ca.: 2,1 x 2,1 x 1,95 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 500 mm turning diameter over slide rest: 300 mm turning length: 2000 mm turning diameter in the gap: 710 mm turning speeds: 36 - 1600 U/min centre height: 250 mm spindle bore: 103 mm tailstock quill taper MT: 5 MK tailstock travel: 150 mm tailstock quill diameter: 75 mm total power requirement: 7,5 kW weight of the machine ca.: 3,15 t dimensions of the machine ca.: 3,65 x 1,0 x 1,3 m Highlights - Large 103mm spindle bore - High cutting performance, optimum cutting results - Electromechanical spindle brake - Sophisticated gear design for transmitting the engine power in high Torques and strong cutting forces - Tuned, stiff construction for the absorption of large cutting forces - Tailstock construction with large radius for the machining of long waves - Feed operation via one-hand lever technology with rapid traverse function Delivery: 3-jaw chuck 315 m ...

turning diameter over bed: 330 mm turning diameter over slide rest: 178 mm turning length: 1000 mm turning diameter in the gap: 450 mm turning speeds: 70 - 2000 U/min centre height: 165 mm spindle bore: 38 mm tailstock quill taper MT: 3 total power requirement: 1,1 kW weight of the machine ca.: 0,5 t dimensions of the machine ca.: 1,9 x 0,72 x 1,4 m Center lathe with - 3-jaw chuck F 315 - Fixed tailstock top - Multifix holder - 2-axis digital display - Fixed Lynette 180 mm - Coolant system - rapid traverse The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Karmetal KDG 560 Saw Year : November 2016 Blade dimension : 54 x 1.6x 7140

x-travel: 300 mm y-travel: 200 mm z-travel: 350 mm table-size: 700 x 200 mm spindle taper ISO: 40 turning speed range - horizontal: 150 - 1660 U/min turning speed range - vertical: 110 - 1230 U/min quill stroke: 120 mm spindle drive: 3,0 kW weight of the machine ca.: 1,15 t dimensions of the machine ca.: 1,31 x 1,38 x 1,65 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 500 mm turning diameter over slide rest: 300 mm turning length: 1000 mm turning diameter in the gap: 710 mm turning speeds: 36 - 1600 U/min centre height: 250 mm spindle bore: 103 mm tailstock quill taper MT: 5 MK tailstock travel: 150 mm tailstock quill diameter: 75 mm total power requirement: 7,5 kW weight of the machine ca.: 2,75 t dimensions of the machine ca.: 2,5 x 1,1 x 1,4 m Center lathe with - 3-jaw chuck F 315 - Fixed tailstock top - Multifix holder - 2-axis digital display - Fixed Lynette 180 mm - Coolant system - rapid traverse The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 360 mm turning diameter over slide rest: 220 mm turning length: 1000 mm turning diameter in the gap: 506 mm turning speeds: 45 - 1800 U/min centre height: 180 mm spindle bore: 38 mm tailstock quill taper MT: 3 total power requirement: 2,4 kW weight of the machine ca.: 0,9 t dimensions of the machine ca.: 1,9 x 0,8 x 1,2 m Center lathe with - 3-jaw chuck F 315 - Fixed tailstock top - Multifix holder - 2-axis digital display - Fixed Lynette 180 mm - Coolant system - rapid traverse The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Automatic punching press, high speed press, eccentric press, single-column press, punching machine, single-column eccentric press. Manufacturer: Kaiser PO 10. Year of manufacture: 1982. Pressure capacity: 10 [tons]. Stroke: adjustable 2 to 40 [mm]. Speed: 120-600 [strokes/min]. Table size: 460 x 250 [mm]. Clamping pin: Ø 32 [mm]; depth 50 [mm]. Central automatic lubrication system. Connection: 380 [V]; 50 [Hz]. Manual speed adjustment on motor. Motor: Stober; 1.1 [kW]; 1450 [1/min]. Single disc clutch and brake. Dimensions: 1250/950/H1800 [mm]. Weight: 850 [kg]. El schematics included. Packing and loading included. Feeding device not included, if needed contact for more information.

saw blade diameter: 400 mm cutting diameter: 130 mm capacity 90 degrees: flat: 220 x 90 mm turning speeds: 3200 U/min saw-blade dia.: 400 x 3,2 x 40 mm motor: 400 Volt total power requirement: 3,0 kW weight: 125 kg range L-W-H: 700 x 900 x 1500 mm Furnishing: - Precise and accident-free work thanks to cutting from below - Quick setting for miter cuts - Workpiece clamping with adjustable vice and pressure piece - pneumatic tool clamping The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

cutting diameter: 280 mm band length: 450 mm capacity 90 degrees: square: 240 x 240 mm capacity 90 degrees: flat: 280 x 160 mm capacity 45 degrees: round: 180 mm dimensions of saw-blade: 450x40x2,0 mm engine output: 2,6 kW height of material-table: 500 mm weight of the machine ca.: 495 kg range L-W-H: 1500 x 600 x 1340 mm Furnishing: - stepless hydraulic lowering - manual vice - Miter adjustment ü. vice - coolant device The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Manufacturer: Kaeser #5384 Type: TF 171 Manufacturing year: 2002 Operating pressure: max. 16 bar Temperature range: 5 - 43 celsius Voltage: 400 V Weight: 625 kg Overall dimensions: 1300 x 900 x 2100 mm

cutting diameter: 250 mm saw band length: 3150 x 27 x 0,9 mm table height: 700 mm cutting width: 250 x 320 mm cutting speed: 25 - 90 m/min dimensions of saw-band: 2480 x 27 x 0,9 mm : 120 mm : 120 mm : 190 mm Impact energy: 190 mm connected load frequency: 400 Volt total power requirement: 1,5 kW weight of the machine ca.: 0,5 t dimensions: 0,95 x 1,16 x 1,98 m Miter cuts to 60 ° left - cutting speed 35/70 m / min. - Vice with rapid clamping device - Bandsaw blade guide made of hard metal - Band tension control - Electric cooling automatic. Currently only available in red. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel (diameter): 40 mm throat: 290 mm bore stroke: 115 mm spindle taper: SK 40 spindle turning speed range: 70 - 3200 U/min : 350 mm : 130 mm table surface area: 590 x 190 mm connected load frequency: 400 V diameter of hob: max. 80 mm feed: 0,1 - 0,18 - 0,26 mm/U total power requirement: 1,1 kW weight of the machine ca.: 0,4 t dimensions of the machine ca.: 0,7 x 0,95 x 1,75 m Drilling and milling machine - Cross Support - Cabinet - Swivel spindle head left / right 90 ° - Feed via hand crank The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 330 mm turning diameter over slide rest: 210 mm turning length: 635 mm turning diameter in the gap: 480 mm turning speeds: 58 - 2500 U/min centre height: 167 mm spindle bore: 40 mm tailstock quill taper MT: 3 MK total power requirement: 2,2 kW weight of the machine ca.: 0,8 t Center lathe with - 3-jaw chuck F 315 - Fixed tailstock top - Multifix holder - 2-axis digital display - Fixed Lynette 180 mm - Coolant system - rapid traverse The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel (diameter): 32 mm throat: 320 mm bore stroke: 160 mm spindle taper MT: 4 MK table:: 500 x 420 mm column diameter: 120 mm turning speeds: 85 - 1800 U/min feeds: 0,1 - 0,2 - 0,3 mm/U total power requirement: 0,85 / 1,5 kW weight of the machine ca.: 500 kg. range L-W-H: 965 x 515 x 1920 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Two cutting speeds - Vice with counter-clamping device - Infinitely variable mitre adjustment (-45° to +60°) - Coolant device - Material support roller - Pin chip remover and chip drawer

Package of dry mix, used inspection possible good condition video available