ka used for sale

KAWASAKI BA006L welding robot was built in 2019 in China by Kawasaki Precision Machinery (Suzhou) Ltd. The machine designed for arc welding of workpieces is distinguished by its robust arm, high precision and reliability. Each of the 6 axes is driven by powerful servomotors that guarantee excellent movement speed and dynamics. All cabling, on the other hand, is routed inside the through-hole wrist to minimise the wear and the possibility of cable interference with peripheral devices. The KAWASAKI 6-axis robot weighs 160 kg. KAWASAKI BA006L works with a two-axis, electrically driven welding positioner. The device rotates and tilts workpieces during the process, enabling the welding of even the most complex shapes. Both axes are controlled continuously from the robot controller. The robotic welding station is fully complete and consists of the following components: – robot arm: KA ...

Key data: 200 mm, 250 mm

Saw blade length 400 mm Power 0.53 / 0.78 kW Cutting speed approx. 15 / 30 m/min Vise opening width 190 mm Cutting area approx. approx. 200 mm approx. flat 240 x 190 mm

Kaeser SK26 Air compressor Serial: 2610494 Air compressor, 15Kw, 7.5Bar, rate motor speed 3000/min, 3Ph

Kaeser SK26 Air compressor Serial: 264957 Air compressor, 15Kw, 7.5Bar, 2.4M3/min, 3Ph

Kaeser SK26 Air compressor Serial: 2610493 Air compressor, 15Kw, 7.5Bar, rated motor speed 3000min, 3Ph

cutting diameter: 320 mm capacity 45 degrees: round: 180 mm capacity 90 degrees: square: 320 x 320 mm capacity 45 degrees: square: 180 x 180 mm strokes per minute: 40 - 57 - 80 - 115 1/min cutting speed: 16 - 22 - 31 - 45 m/min dimensions of saw-blade: 575 x 55 x 2,5 mm total power requirement: 3 kW weight of the machine ca.: 700 kg dimensions of machine L x W x H: 1,55 x 0,70 x 0,98 m - with mitre cutting Accessories: coolant The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Brand-New, Still Packed, Pellet Mill, capacity 5 tons equipped with 6 heads

Heat recovery system wit 450ltr enameled tank + double wall heat exchanger for DHW. Good condition. Prepare to connect for Your refrigeration system. 450ltr+108/21x16/10 (1,6) 450ltr+76/10x16/10 (1,4)

Horizontal Band Saw Machine Fabr. KASTO Type HBA 340 AU Specifications: Cutting range 90° round 340 mm Cutting area 90° flat 340 x 380 mm Saw blade length 5334 x 32 x 1.06 mm Table height 700 mm Feed length 600 mm Multiple feed 1800 mm infinitely variable cutting speed 20 - 130 m/min. Drive power 6.5 kW External dimensions L x W x H approx. 2200 x 2600 x 2000 mm Weight approx. 2.1 t with-chip conveyor used, in good condition All information to the best of our knowledge but without guarantee until the order confirmation The machine can be demonstrated at the site near Aachen.

Key data: 1050 mm, 510 mm, 510 mm

Machine Details Stock-No. 1105-04003 Type of machine Machining Center - Vertical Make BARON MAX Type KAWA SEIKI VMC 32 Year of manufacture 2002 Type of control CNC Storage location HAGUENAU FRANCE Country of origin Taiwan Delivery time immediately Freight basis EX WORK Technical details x-travel 810 mm y-travel 510 mm Z-Travel 510 mm table surface area 1050 X 550 mm turning speed range - milling 60 - 8000 rpm control FANUC OM power capacity - milling spindle 7.5 kW tool taper BT 40 No. of tools in magazin 20 stations feed range 1 - 10000 mm/min Rapid traverse: 30 m/min total power requirement 25 kW Weight of the machine approx. 500 kg dimensions of the machine approx. 2300x2200x2600 mm Additional information nice machine WITH FANuc OM

saw blade diameter: 400 mm cutting diameter: 130 mm stroke: 150 mm cutting range - square -: 120 x 120 mm cutting range - flat -: 300 x 40 mm capacity 45 degrees: round: 130 mm capacity 45 degrees: square: 110 x 110 mm capacity 45 degrees: flat: 245 x 40 mm mitter cutting - all-position: 90 ° cutting speed: 13 / 25 m/min control: minipos 807 total power requirement: 4,3 kW weight of the machine ca.: 850 kg dimensions of machine L x W x H: 1,20 x 1,20 x 1,82 m Accessories: ingoing and outgoing rollertrack each approx. 4000 mm long, NC length stop, coolant The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 280 mm turning diameter over slide rest: 158 mm turning length: 600 mm turning speeds: 45 - 2000 U/min centre height: 140 mm spindle bore: 26 mm tailstock quill taper MT: 2 tailstock quill stroke: 60 mm metric threading: 0,25 - 2,5 mm thread - inch: 6 - 96 TPI connected load frequency: 230 V total power requirement: 0,75 kW weight of the machine ca.: 0,16 t dimensions of the machine ca.: 1,26 x 0,58 x 0,60 m Professional metal lathe, gearing machine - 3-jaw chuck - 4-jaw chuck - hardened bed tracks - Clamping plate - 4-way chisel holder - Feed protection - standing and rotating bezel - Splash guard - Machine light The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Cardboard shears , Cardboard cutting machine , Cutting length 110 cm . Masive steel table top , Cleaned and tested

Kaiser Press 50to -Exhibition machine / zero operating hours -Electro-hydraulic drive -Actuation: foot pedals and push buttons on the control panel -Compressive force max.: 50 tons -Power consumption: 0.75 kW -Voltage: 230 V -Frame width: 930 mm -Maximum frame width incl. hand crank and electrical unit: 1300 mm -Total height: 1900 mm -Cylinder stroke: 145 mm plus 60 mm lead screw -Usable width – working area inside: max. 750 mm -Usable height – working range: 0 mm to 780 mm -Depth of the frame: 220 mm -Total depth with foot: 535 mm (attachment to the ground possible) -Support depth of the height-adjustable work table (cross beam): 245 mm -Cross beam adjustable in 6 positions (hole spacing: 140 mm) -Height adjustment of the cross beam via hand crank (no manual lifting necessary) -Hydraulic unit can be moved laterally: 300 mm (ball bearing in the upper guide area)  ...

Koller head with 5 wheels, used

Saw blade Ø: 400 mm Cutting range at 90° round: 120 mm Cutting area at 90° rectangle: 200 x 80 mm Cutting area mitred at 45° rectangle: 150 x 70 mm Cutting speed: 13, 17, 26 m/min Drive motor: 380 V, 1.7/2.2/2.6 kW Space requirement: 1050 x 1000 x 1680 mm Weight: approx. 850 kg

We offer an LTG-TowerMax L 20.0-250-1250-825-10000 storage system modernized by us with a completely new StoreControl L control system. Exterior Dimensions: Height 10,000 mm Overall width 1600 mm Overall depth 2680 mm Total payload machine up to 2 x 10,000 kg 90 carriers for up to 250 kg payload each (additional carriers optionally available) in clear usable dimensions: W = 1250 mm T = 825 mm Usable height up to 75 to 750 mm Start of the operating opening in 865 mm above OKFF, then 850 mm high; can be operated manually with lifting door, Engine power Vertical drive 2.2 kW / 400 volts Horizontal drive 0.29 kW / 400 Volt Colour scheme grey/blue, Traeger galvanised Surface cleaned, traces of use possible subject to errors as well as technical changes or detail deviations in photos, Delivery and installation currently mainly in D, A and several neighboring coun ...

Key data: 400 mm, 180 mm

Max. diameter or cutting width 180 mm, smallest dimension to be sawn D 10 mm, automatic feed 600 mm, max. feed length several times 1800 mm, minimum offcut length for single cut 20 mm, minimum remnant length in automatic operation 110 mm, Table turning area for mitre cutting 135 degrees, Total drive power 3.2 kW, Weight without roller tracks 1100 kg, coolant system, the saw is still electrified, Function video available, Operating manual with circuit diagrams and spare parts lists.

Traglsat: 7000kg Load center of gravity: 600mm Battery: 80V SN: T322080279

Kannegiesser belt conveyor GF 6250-680/600 RA1103 Make: Kannegiesser as good as new, exhibition machine Year of construction 2014 Conveyor length (FL): 6,250 mm Belt width (GB): 600 mm Nominal/outer width (NB): 680 mm Constant conveying speed: v=0.5 m/sec. Electrical data: 380V 0.25kW without control/connections to upstream and downstream conveyors Scope of delivery: without supports and side guides (please enquire if required) Optional: Supports Side guides on one or both sides Frequency inverter for stepless speed control Price: plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg Features: Construction year: 2014 condition: as good as new (used) Conveying length in mm: 6250 Nominal / outside width in mm: 680 Belt width in mm: 600 Driven: YES Engine type: Nord KW: 0,25/S1 Ampere: 0,9 Conveyor speed m / s: 0,5 scope of delivery: without supports and side guides  ...

This machine is a mixer, cutter and emulsifier enclosed in one housing The benefits are as follows - space-saving thanks to compact design, - grinding the product in the cutting bowl under the influence of vacuum with simultaneous stirring and cooking - stable end product with repeatable quality thanks to fully automatic process control, - possibility of direct and indirect heating and cooling, - the possibility of producing fine emulsions and paste-like masses, as well as products with fine and coarse fractions. Capacity: 900 l Electrical voltage: 400V 50Hz 3N Installed power: 2x106 kW + 132 kW Main Material: Stainless Steel Agitator tank: 2000 l

Height 2200 mm Width 1400 mm Length 2800 mm Weight approx. 1300 kg Capacity 2000 l Power supply: 400V 50Hz 3N Total power 5.1 kW Main Material Stainless steel, acid-resistant Order processing time available in stock Barrel Aeration Valve Yes, Manual Valve Driver type Mikster MCM 023 Variable speed control of the tumbler Smooth adjustment of the barrel speed Tumbler with cooling jacket No Load approx. 1400 kg

Rotofeeder end feeding system Fleetwood type: FSI including transport system from magazin to the Ferrum can seamer distance way approx. 2.800 mm complete reconditioned and fixed for can ends 202 including PLC Siemens S7

: 370 mm rund : ja : möglich The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Stock number: 3898 CIRCULAR SAW Manufacturer: KALTENBACH, Type: TL 255 Specifications: Size sawing capacity 80 mm Ø Miter 45 - 90 + 30 degrees Size blade diameter 250 mm Weight: 60 kg

quantity: 2 STK Dr. Kaiser Diamant Abrichtscheibe Modul 1,5 - EW 15° - HBR=1000 - ID-Nr. 69667_1 The classic” process for dressing grinding wheels grinding wheels in all areas of mass production the workpiece geometry-based profile roller. The short dressing times due to radial plunging of the grinding wheel grinding wheel into the dressing roll help to achieve fast and reproducible workpiece dressing. reproducible workpiece application. All conventional abrasives and, in special applications hard abrasives in special applications. For filigree workpiece geometries or materials that are difficult to cut materials that are difficult to cut, continuous CD dressing (continuous dressing) is often used. - Thread - Turbine blades - Bearing seats - Bearing raceways - valves - nozzle needles - shear blades - gear wheels - Twist-free surfaces Translated with DeepL.com (free version) The data ...

quantity: 1 STK Diamant Abrichtscheibe Modul 2.75 - EW 17.5° - HBR=2500 - ID-Nr. 85551020_1 The classic” process for dressing grinding wheels grinding wheels in all areas of mass production the workpiece geometry-based profile roller. The short dressing times due to radial plunging of the grinding wheel grinding wheel into the dressing roll help to achieve fast and reproducible workpiece dressing. reproducible workpiece application. All conventional abrasives and, in special applications hard abrasives in special applications. For filigree workpiece geometries or materials that are difficult to cut materials that are difficult to cut, continuous CD dressing (continuous dressing) is often used. - Thread - Turbine blades - Bearing seats - Bearing raceways - valves - nozzle needles - shear blades - gear wheels - Twist-free surfaces Translated with DeepL.com (free version) The data for  ...

TMP VORONEZH KA2536 crank press was built in 1979 in the USSR by the Voronezh Mechanical Press Plant (Воронежский механический завод). The offered machine is perfect for many industries, especially those which require high press force and high repeatability of produced parts. This is because it enables even the most demanding metal forming processes to be performed, i.e. stamping of structural components, forming of parts, hot and cold forging, deep drawing operations and the production of parts with a large surface area. All of these machining processes are performed with a high press force of 400 tonnes and can be carried out continuously, increasing production efficiency and reducing downtime to a minimum. The crank mechanism used ensures uniform force transfer, which translates into precise slider feed and repeatability of each cycle. This solution is part ...

We offer LTG-TowerMax L 20.0-250-1250-825-7200 vertical storage systems modernized by us with a completely new StoreControl L control system. currently 2 identical machines available Exterior Dimensions: Height 7200 mm Overall width 1600 mm Overall depth 2680 mm Total payload machine up to 2 x 10,000 kg 78 carriers for up to 250 kg payload each (additional carriers optionally available) in clear usable dimensions: W = 1250 mm T = 825 mm Usable height up to 65 to 750 mm Start of the operating opening in 865 mm above OKFF, then 850 mm high; can be operated manually with lifting door, Engine power Vertical drive 2.2 kW / 400 volts Horizontal drive 0.29 kW / 400 Volt Colour scheme grey/dark grey, Traeger galvanised Surface cleaned, traces of use possible subject to errors as well as technical changes or detail deviations in photos, pictures of an identical ma ...

Nominal force: 500 ton Slide stroke: 250 mm Slide strokes per minute: 25 Table dimensions: 1400 x 2500 mm Max distance between table and slide in its lower position at the upper position of adjustment: 750 mm Size of distance adjustment between table and slide: 250 mm Press dimensions (Length x Width x Height): 4130 x 2945 x 7200 mm Press weight: 69000 kg

Max. saw blade diameter: 350 mm Manual material tensioner Minimum quantity spraying Digital angle display

Collar cutting machine, trim, trim collar, shirt collar, shirt production, shirt, pneumatic, textile production, textile machine, garment production, garment production -Kannegiesser System: BRILKA -Kannegiesser: cut and twist collar. -pneumatic: foot switch -Dimensions: 520/900/H1190 mm -Weight: 33 kg

Nominal force, kN 2500 Slider stroke, mm 400 Number stroke per minute 25 adjustment mm 260 Distance between table and slider, mm 750 Main motor power kW 47 Table size width / length mm 1250/2500 Dimensions of the machine Length Width Height (mm) 4555_2900_5855 Weight kg 50100

Hydr. Welding Rotary and Tilting Table - Four Axis - Welding Manipulator Specifications: - Max. load capacity 15000 kg - Face plate dimensions 2990 x 2990 mm - min. table height in horizontal position approx. 1070 mm - Face plate mot .rotatable + swivel or tiltable - Face plate horizontal + vertically movable, travel distance 1250 mm - Rotary movement electr. Infinitely variable - Right + Counterclockwise - Welding current transmission approx. 700 A - Drive 400 V - Connected load 33.0 kW - Handheld remote control for speed regulation - E. footswitch - Space requirement approx. W 2990 x H 1070 x D 5500 mm - Weight approx. 12500 kg