ka used for sale

Karl Storz 26055BL – Resection Shackle, Never Used Manufacturer: Karl Storz Model: 26055BL Condition: New, Never Used Auction-ID: A1-51618-370

Karl Storz 27040NB – Resection Shackle, Never Used Manufacturer: Karl Storz Model: 27040NB Condition: New, Never Used Auction-ID: A1-51618-360

Renault Kangoo light commercial vehicle, built in 2021, equipped with a 1,461 cc 4-cylinder diesel engine with an output of 70 kW (approx. 95 hp), front-wheel drive and 5-speed manual gearbox. Odometer reading at recording: 82,877 km. Equipped with 2 seats, radio, metal partition wall/safety rack and cargo space with wooden loading floor. Two keys and Belgian vehicle documents available. The particulate filter is clogged and needs to be checked/repaired. The vehicle shows many visible signs of wear and damage to both bodywork and cargo space/interior. See photos for a complete picture of the condition. Otherwise, the vehicle functions properly. Vehicle starts, drives and brakes properly. Auction-ID: A3-46113-22129

Type: Oil-free piston compressor Model: Kaeser AIRBOX CENTRE 550 with integrated dryer & air receiver Rated power: 3 kW Air flow: 255 l/min Max. pressure: 10 bar Working hours: 2811 h (2533 h under load) YoM: 2014 Pump: Replaced with new unit in 2021 Last service: Kaeser C-Service on 06.10.2022 Maintenance: Regularly serviced Features: Integrated dryer, receiver tank, IE3 motor, refrigeration dryer (dew point +5 °C), oil-free operation Dimensions (D x W x H): 1730 x 820 x 1640 mm Weight: 550 kg ⚠️ Service manual not available. Please view the test video linked with the lot. Auction-ID: A7-51645-8

Covered outdoor kitchen in one unit, with gas barbecue, kamado, refrigerator, sink and extractor hood. Anthracite version with a white sintered stone kitchen worktop. Material: Frame powder-coated galvanized steel, Stainless steel kitchen, Sheet metal aluminum Equipment • 81 cm stainless steel gas barbecue • Kamado • Refrigerator • Sink with tap • Extractor hood • White kitchen worktop made of sintered stone (heat, scratch and stain resistant) • LED lighting • Electrically operated valve • TV mount (TV not included) • Planters and storage cupboards on the sides Construction • Frame: galvanized steel • Interior and exterior: aluminum, anthracite • Kitchen: stainless steel, anthracite Practical information • Condition: slight transport damage, see photos. Because of this damage, the pod is being auctioned. Auction-ID: A1-47452-2

Band sawing machine used Manufacturer: KALTENBACH Type: KBS 750 NA Material Dimensions in the cutting opening 750 x 500 mm Power: 5.5 kW 380V Total dimensions approx. 24 x 18 x 4.5 m The system has been dismantled! Weight approx. 14t approx. at least one semi-trailer is required for transport. Attention! Location Riesa! Viewing on 20.11.26 only with prior registration at r.schober@kobran.de! Changes and errors in the technical data, specifications and prices reserved. Attention! We load for you. You just need to organize a transport.; For this service, the additional costs shown are.; Auction-ID: A1-51900-86

Registration certificate part 1 available, part 2 certificate from police. certificate of conformity available. Auction-ID: A3-46100-6

Kalfass Universa 5050 EC Automatic Film Full Wrap L-Sealer Machine (2007) 17.5 units/minute 1,200mm long x 400mm high max product dimensions 500 x 500mm max seal area Apex DF carton feeder Kalfass shrink tunnel Auction-ID: A1-51927-20

Operation unknown. Auction-ID: A1-50997-32

internal dimensions: L: 710cm W: 220cm H: 170cm. No license plate registration. Auction-ID: A1-47426-819

KawaKenki 30 Silent Diesel Generator Set Specifications: Model: KK30-III-SS Engine model: K4100D Alternator model: STC-30 Power: 30 kVA Power factor: 0.8 Voltage: 230/400 V Phases: 3 Frequency: 50 Hz Current: 43.3 A Speed: 1,500 rpm Performance level: G1 Weight: 670 kg Serial Number: 25120648 Production date: 2025.12 Features: Sound-insulating canopy M.AQUA Digital Control Panel Automatic and manual operation Emergency stop 63 A / 380-415 V 3P+N+E CEE socket, IP67 Terminals for 3-phase connection Starter battery Fuel filter CE marking UKCA marking Particularities: Executed as a Silent Diesel Generator Set. Auction-ID: A1-47397-653

Kalfass Universa 5050 EC Automatic Film Full Wrap L-Sealer Machine 17.5 units/minute 1,200mm long x 400mm high max product dimensions 500 x 500mm max seal area Apex DF 18 carton feeder Kalfass shrink tunnel Auction-ID: A1-51927-21

Kawakenki 50 Silent diesel generator 50 kVA Specifications: Model: KK50-III-SS Generator power: 50 kVA Voltage: 230/400 V Number of phases: 3 Frequency: 50 Hz Current: 72.2 A Power factor: 0.8 Speed: 1,500 rpm Engine model: N4105ZD Alternator Model: STC-50 Performance Level: G1 Weight: 760 kg Production date: 02-2026 Serial Number: 26020146 Features: Sound-insulating canopy Diesel engine Emergency stop CEE terminal 63 A, 380-415 V, 3P+N+E, IP67 Battery Integrated fuel tank CE marking Particularities: Version: Silent Diesel Generator Set / Super Silent Auction-ID: A1-47397-654

Hacksaw used Manufacturer: KASTO Type: PSB 250 U Year: 1991 Power: 2 kW 380 V Scope of delivery see photos! Total dimensions: approx. 1600 x 600 x 1300 mm Weight 380 kg Changes and errors in the technical data, specifications and prices reserved. Viewing on 20.11.26 only with prior registration at r.schober@kobran.de! Attention! We dismantle and load for you. You just have to organize a transport.; For this service, the additional costs shown are.; Auction-ID: A1-51900-8

Kalfass Universa 5050 Automatic Film Full Wrap L-Sealer Machine Production Capacity: 20-50 packs/minute Includes Apex S02 DF Packaging Machine Auction-ID: A1-51927-33

This white Škoda Kamiq combines the practicality of a compact SUV with a comfortable DSG automatic gearbox and extensive equipment. The car has a digital cockpit, navigation system, SmartLink, automatic climate control, heated front seats, reversing camera and parking sensors, among other things. The car has 142,064 km on the odometer and is equipped with alloy wheels and a black fabric interior with decorative stitching. Condition: the car shows signs of wear according to age and mileage, including scratches and paint damage to the bumpers and bodywork, kerb damage to the rims and some minor damage to the car - Additional equipment - Automatic DSG gearbox with sport mode and manual shift mode - Digital cockpit with configurable instrument panel - Large touchscreen with integrated navigation - SmartLink for smartphone integration - Bluetooth and phone preparation - Automatic climate con ...

Many new parts such as supercharger cyl pistons, had good maintenance, trailer included. 104 hours. 310 HP Auction-ID: A1-47426-2064

Kalfass Universa 5050 Automatic Film Full Wrap L-Sealer Machine Production Capacity: 20-50 packs/minute Includes Apex S02 DF Packaging Machine Auction-ID: A1-51927-34

Kalfass Universa 5050 Automatic Film Full Wrap L-Sealer Machine Includes Apex S02 DF Packaging Machine Auction-ID: A1-51927-31

Kalfass Universa 5050 EC Automatic Film Full Wrap L-Sealer Machine (2007) 17.5 units/minute 1,200mm long x 400mm high max product dimensions 500 x 500mm max seal area Apex DF carton feeder Kalfass Mini 400 shrink tunnel Auction-ID: A1-51927-19

KawaKenki 40 Silent Diesel Generator Set Specifications: Model: KK40-III-SS Engine model: K4100ZD Alternator model: STC-40 Power: 40 kVA Power factor: 0.8 Voltage: 230/400 V Phases: 3 Frequency: 50 Hz Current: 57.7 A Speed: 1,500 rpm Performance level: G1 Weight: 710 kg Serial Number: 26010546 Production Date: 2026.01 Features: Sound-insulating canopy Emergency stop 63 A / 380-415 V 3P+N+E CEE socket, IP67 Terminals for 3-phase connection Starter battery Fuel filter CE marking Particularities: Executed as a Silent Diesel Generator Set. Auction-ID: A1-47397-651

Kalfass Universa 5050 Automatic Film Full Wrap L-Sealer Machine Production Capacity: 20-50 packs/minute Includes Apex S02 DF Packaging Machine Auction-ID: A1-51927-32

2x Kango Type 900 electric breaker / demolition hammer Quantity: 2 pieces Brand: Kango Type: 900 Product Type: Electric Breaker / Demolition Hammer Technical data per machine: - Power: 900 W / 0.9 kW - Supply voltage: 220 V - Frequency: 25–60 Hz - Current: 4.3 A - Double insulated - 1x KEMA certification - Manufacturer: Kango Wolf Power Tools Ltd., London, England - Engine designation: M 0956 - Speed: 72 rpm Features: - 2x electric breaker - Robust metal housing - Double handles - Chisel holder - Electrical power cables - Various pointed and flat chisels - 2 metal Kango transport/storage cases - Other accessories as shown Application: suitable for heavy demolition and demolition work in concrete, stone, floors and masonry. Condition: - Used condition - Clear signs of wear and age - Cases show signs of wear and surface rust - Includes chisels and accessories as shown - Working on admiss ...

Kawakenki 25 Silent diesel generator 25 kVA Specifications: Model: KK25-III-SS Generator power: 25 kVA Power factor: 0.8 Voltage: 230/400 V Phases: 3 Frequency: 50 Hz Current: 36.1 A Speed: 1,500 r/min Performance level: G1 Engine Model: K4100D Motor power: 30 kW Alternator Model: STC-25 Production date: 2026.02 Weight: 660 kg Features: Sound-insulating canopy M.AQUA Digital Control Panel Emergency stop CEE terminal 32 A, 380-415 V, 3P+N+E, IP44 ABB earth leakage circuit breaker / circuit breaker Battery Electric start Lockable service doors Particularities: Generator Set Serial Number: 26020128 Engine number: 26021165 CE marking available Auction-ID: A1-47397-650

Kalfass Universa 5050 EC Automatic Film Full Wrap L-Sealer Machine 17.5 units/minute 1,200mm long x 400mm high max product dimensions 500 x 500mm max seal area Apex DF 18 carton feeder Kalfass Mini 400 shrink tunnel Auction-ID: A1-51927-22

Kawakenki 70 Silent diesel generator 70 kVA Specifications: Model: KK70-III-SSS Generator power: 70 kVA Voltage: 230/400 V Number of phases: 3 Frequency: 50 Hz Current: 101 A Power factor: 0.8 Speed: 1,500 rpm Engine model: N4105ZD Alternator Model: STC-70 Performance Level: G1 Weight: 880 kg Production date: 02-2026 Serial Number: 2602013 Features: Sound-insulating canopy Diesel engine M.AQUA Digital Control Panel Automatic and manual control functions Emergency stop 3-phase terminals Battery Integrated fuel tank CE marking Particularities: Version: Silent Diesel Generator Set / Super Silent Auction-ID: A1-47397-655

KawaKenki 60 Silent Diesel Generator Set Specifications: Model: KK60-III-SS Engine model: N4105ZD Alternator model: STC-60 Power: 60 kVA Power factor: 0.8 Voltage: 230/400 V Phases: 3 Frequency: 50 Hz Current: 86.6 A Speed: 1,500 rpm Performance level: G1 Weight: 770 kg Serial Number: 26020154 Production date: 2026.02 Features: Sound-insulating canopy M.AQUA Digital Control Panel Automatic and manual operation Emergency stop 63 A / 380-415 V 3P+N+E CEE connection Terminals for 3-phase connection Turbo diesel engine Starter battery CE marking Particularities: Executed as a Silent Diesel Generator Set. Auction-ID: A1-47397-652

GMS 2,000 mm Tilting Cleaning Bucket with CW40 Coupler – 720 L Brand: Supermarket Model: LSD-H-KAT4-2000-CW40 Year: 2022 Type: Hydraulic tilting cleaning bucket Width: 2,000 mm Capacity: 720 L Weight: 590 kg Fastener : CW40 type Verachtert Condition: New Auction-ID: A1-51949-16

Only for spare parts. Defective and non-operational. 2012, serial 10018, Honda LPG engine 8.1 kW, own weight 600 kg. Sold as inspected, without warranty. Please review the photographs and arrange an inspection before bidding. Auction-ID: A1-51472-40

B+B-TEC KARAT 250 SE Core Drilling Machine with Drill Stand Model: KARAT 250 SE Manufacturer: B+B-TEC Drilling stand included Tested for function – No warranty Used On-site test possible on viewing days Delivery is made with the scope shown in the pictures. All dimensions, performance and weight specifications are approximate and non-binding. Auction-ID: A1-51934-31

KALA MISTRAL 1650-65\" LAMINATOR M1650001 The Kala Mistral 1650 is a stand-alone lamination machine, designed for the professional finishing of eco-solvent, latex, offset and screen printing Auction-ID: A1-51953-36

GMS 1,300 mm earthmoving bucket with CW40 coupler – 1,174 L Brand: Supermarket Model: LDKD-KAT3-1300-CW40 Year: 2022 Type: Earthmoving bucket Width: 1,300 mm Capacity: 1,174 L Weight: 797 kg Fastener : CW40 type Verachtert Condition: New Auction-ID: A1-51949-15

This Lot belongs to the ATMP 250 Industrial ANDRITZ ATMP (Advanced Thermo-Mechanical Pulp) process installation, acquired under a 2018/2019 project. The installation was designed for mechanical pulp production Auction-ID: A1-51939-722

- Toyota Forklift / Forklift - Propulsion: Gas / LPG - Engine: Toyota 4P gas engine - Engine number: 4P0004697 - Serial number: 11045 - Operating weight: approx. 2.6 t - Equipped with Kaup lifting device - Lift mast with hydraulic lifting function - Fork carriage with two forks - Pneumatic tyres - Overhead guard - Driver's seat with seat belt - Lighting and exterior mirrors available - Manual control levers for travel and hydraulic functions - Rear-mounted gas cylinder - Classic Toyota instrumentation - Paintwork: Red - Visible signs of wear due to age and service life - Paint chips, scratches and corrosion build-up, especially on the lift mast, forks and bodywork - Forks with clear superficial traces of rust and wear - Engine compartment and aggregates with age-appropriate soiling - Tires optically used - Seat and controls with signs of wear - Year of construction and ...

This Lot belongs to the ATMP 250 Industrial ANDRITZ ATMP (Advanced Thermo-Mechanical Pulp) process installation, acquired under a 2018/2019 project. The installation was designed for mechanical pulp production Auction-ID: A1-51939-719

Pallet included Auction-ID: A1-50943-929

GMS 800 mm earthmoving bucket with CW40 coupler – 693 L Brand: Supermarket Model: LDKD-KAT3-800-CW40 Year: 2022 Type: Earthmoving bucket Width: 800 mm Capacity: 693 L Weight: 584 kg Fastener : CW40 type Verachtert Condition: New Auction-ID: A1-51949-14

SEW-Eurodrive Industrial geared motor with gearbox Pallet included Auction-ID: A1-50943-436

Auction-ID: A1-50943-416

Electric forklift Kalmar ECE70-600 Lifting height : 3.60 m. Lifting capacity : 7 tons at 700 mm. Headroom : 2.75 m. With fork spreader and sideshifter. Fork length of your choice : 1.20 m – 1.80 m or 2.40 m. With electric level position of the forks (horizontal) Very compact machine, is weighted. New tyres ! New battery with automatic filling system ! Working hours : 8200. With lighting and camera front and rear. With semi cab. Maximum fork open position outside 1.43 m. Own weight machine : 11800 kg. In perfect condition ! With charger Auction-ID: A3-46118-11351

Kajmak production tub; one of 8 tubs arranged 4 per trolley. Auction-ID: A7-52122-51

Auction-ID: A1-40422-22

Unused seat for tractors, wheel loaders, excavators et cetera with belt Auction-ID: A1-40422-78

Diamond; Type: Eco (in the lab bred) Weight: 3.00 carats Cut: brilliant; Color: F-G Purity: USA Small diamonds: Type: Natural; Weight: 0.30 carats Total; Cut: Brilliant; Color: F-G; Clarity: USA Jewel: Ring; Quality mark: 18 carat gold (750) Weight: 4.0 grams Ring sizes (custom-made): 53 (17 mm); Condition: New; The quality is given to the certificate which belongs to the article; Shop Sales value: 28.000,- Auction-ID: A1-52179-137

Cutting range round: 10 - 260 mm max cutting area square: 260 x 260 mm min.max Section length: 5 mm/ 600 mm Feed length: 600 mm Min. offcut length: 10 mm max Cutting speed: 125 m/min Saw blade dimensions: 4115 x 41 mm x 1.3 mm incl. roller conveyor Auction-ID: A1-52097-42

Manufacturer: KAO FONG MACHINERY CO., LTD. (KAFO) Year: 1990 Type: CNC Vertical Machining Center Numerical Control: FANUC Series 15-M Axes: 3-axis (X, Y, Z) Strokes: X 1030 mm / Y 210 mm / Z 610 mm Spindle: BT40 – up to 6000 rpm – power approx. 11 kW Tool magazine: 20 positions BT40 Weight: approx. 6000 kg Origin: Taiwan Notes: Robust CNC vertical boring milling machine for general machining. Auction-ID: A1-52185-4040

Auction-ID: A1-40422-23

Unused mechanically sprung seat for tractors, wheel loaders, excavators etcetera with belt Auction-ID: A1-40422-80

Manufacturer: OMEGA Year: 1990 Type: High-capacity CNC vertical machining center Numerical control: FANUC 15M Axes: 3-axis (X, Y, Z) Strokes: X 1650 mm / Y 850 mm / Z 790 mm Table: 1900 x 850 mm Spindle: BT50 – up to 6000 rpm – gearbox 2 ranges Tool magazine: 30 positions Weight: approx. 15000 kg Notes: Heavy duty CNC vertical machining center, suitable for intensive machining and large workpieces. Auction-ID: A1-52185-4049

Auction-ID: A1-40422-24