141,819 used machines on RESALE, but how to find them? Machine Search
Disabled car, the rear part goes down and you can drive in it ____ camper ____ sport Auction-ID: A3-46097-2313
Complete cabin. Fork Positioner & Sideshift Auction-ID: A1-41963-45
With double rotating brush Overall dimensions: 800 x 400 x 400 mm Weight: 20 kg Auction-ID: A7-52172-335
VW Golf convertible automatic in clean condition, with normal signs of wear according to age and mileage. Auction-ID: A3-46097-17574
Modular unit, format processing unit, cutting unit, milling unit, profile milling unit, jointing milling unit, trimming unit, double-end profiler, edge processing machine, scoring motor, chipper motor, milling motor for edge processing machine -HOMAG trimming unit for trimming the protruding edges on the front and rear edges -with heavy leadership -Milling unit: swiveling -2x motors -Motor type: KCS 71.16-2 D -Power: 4.4/6.6 kW -Voltage: 220/380/380 volts -Frequency: 50/100 Hz -Speed: 2860/5870 rpm -Other engines with other services in stock for an additional charge -Dimensions: 1200/960/H600 mm -Weight: 470 kg
Bread roll line KÖNIG, type: G2000 with Mini Rex Futura -In good used condition- Compact bread roll line - Mini Rex Futura head machine - Proofer G 2000, SA2-ST2 - Proofing time approx. 6 minutes at maximum output - With side discharge belt single-row - Condition: good, everything checked - Ready to use - Machine is still being cleaned - Head machine output: approx. 4,000 pcs./h - Capacity proofer: approx. 2,500 pcs./h The roll line is in good condition and is ready for immediate use. Viewing and test run are possible at any time by arrangement.
Capsule type: champagne cap folding capacity / hour ca.: 3000 working direction: left-right Working type: fullautomatic Dim. L x W x H [m]: 1,40 amount of capping heads: 3 electrical power supply kW: 380
with optical orientation Working direction: left-right
Carton Libra with Powered Conveyor Belt Dimensons: 0.45x0.9x0.67m
Karton Former for Karton Sheets 6x0.7l inside
Capacity: 32 boxes / minute Closure only on top of the box, Max. carton dimensions: H400 x W 280 mm equipped with connection for remote control
Waco - Jonab - Kallfass high speed cutting-planing-bundling line, Feed speed up to 200 m/min, - Jonab automatic de-stacking and infeed, - Waco Twin-resaw line, type BKW (with tilting infeed system), - Jonab - Kallfass resaw outfeed and infeed planer, - Waco planer, type Gigant- 10 spindles, - Jonab outfeed with bundling systems 1+2, - Outfeed 1 + 2 with integrated cross cut system, - Outfeed 1 + 2 with Logopack labeling + automatic stacker + outfeed, New full electric and retrofit was done in past
Motor power: 11 kW Nominal flow rate: 1.5 m³/min Maximum working pressure: 10 bar Voltage/Phase: 380V Electrical protection: IP55 Management: Integrated inverter Approximate load dimensions: 1050x700x1050 mm Estimated weight: about 300 kg The item is sold in the state in which it is, unverified and without warranty of operation. The sale is subject to acceptance by the seller and may be subject to restrictions, in particular for goods destined for countries to which export is required. Auction-ID: A7-39512-2
Motor power: 45 kW Nominal flow rate: 7.5 m³/min Maximum working pressure: 10 bar Voltage/Phase: 380V Electrical protection: IP55 Management: Integrated inverter Approximate load dimensions: 1500x1000x1265 mm Estimated weight: about 700 kg The item is sold in the state in which it is, unverified and without warranty of operation. The sale is subject to acceptance by the seller and may be subject to restrictions, in particular for goods destined for countries to which export is required. Auction-ID: A7-39512-4
Motor power: 15 kW Nominal flow rate: 1.7 m³/min Maximum working pressure: 10 bar Voltage/Phase: 380V Electrical protection: IP55 Management: Integrated inverter Approximate load dimensions: 1050x700x1050 mm Estimated weight: about 300 kg The item is sold in the state in which it is, unverified and without warranty of operation. The sale is subject to acceptance by the seller and may be subject to restrictions, in particular for goods destined for countries to which export is required. Auction-ID: A7-39512-3
Motor power: 7.5 kW Nominal flow rate: 1.0 m³/min Maximum working pressure: 10 bar Voltage/Phase: 380V Electrical protection: IP55 Management: Integrated inverter Approximate load dimensions: 900x625x860 mm Estimated weight: about 200 Kg The item is sold in the state in which it is, unverified and without warranty of operation. The sale is subject to acceptance by the seller and may be subject to restrictions, in particular for goods destined for countries to which export is required. Auction-ID: A7-39512-1
Precision Miter Saw OMGA T55 300 Präzision Kapp- und Gehrungssäge / Precision Miter Saw OMGA T55 300 Baujahr / Year ca. 2009 mit Absaugung / with suction Sägeblattdurchmesser / Saw blade Diameter 300mm Schnittbreite / Cutting width max. 90° 135 mm Schnittbreite / Cutting width max. auf 45° 90 mm Schnitthöhe / Cutting high max. 98 mm Festpunkte bei / Fixed Points on a 45°- 30° - 22°30' - 15° - 10° rechts und links Sehr guter Zustand / Very good condition Verstellbare Präzisionskapp- und Gehrungssäge mit Drehtisch, selbstzentrierender Blockierung in den Hauptwinkeln 45°, 30°, 22°30’, 15°, 10° und 0° rechts und links, manueller Blockierung der Zwischenwinkel, Winkelablesung von Gradskala.
Rotary screw air compressor with SIGMA CONTROL 2 controller and Siemens IE3 three-phase motor. Year of manufacture: 2014 Serial number: 1007 Material number: 101316.1 Rated motor power: 75 kW Maximum working pressure: 8.5 bar Motor voltage: 400 V, delta connection Frequency: 50 Hz Rated motor current: 134 A Motor speed: 2978 rpm Motor protection rating: IP55 Ambient temperature range: +3°C to +45°C Auction-ID: A1-50699-22
Handling trolley 262011001850 containing 6 WING COFFE coffee tables, 2 KAMI NI coffee tables The industrial trolley is included. The cover in the photos is not included. Photos may not reflect the quantities offered. Only the above description is contractual. Auction-ID: A1-50934-1109
With double rotating brush Overall dimensions: 800 x 400 x 400 mm Weight: 20 kg Auction-ID: A7-50798-58
Pressure 20 bar, max flow rate 360 l/h, never used Overall dimensions: 300 x 300 x 700 mm Weight: 10 kg Auction-ID: A7-50798-316
With double rotating brush Overall dimensions: 800 x 400 x 400 mm Weight: 20 kg Auction-ID: A7-50799-335
Automatic electric sweeper with 5 rotating brushes, dust suppression system, equipped with 5 rotating brushes, 48 volt batteries, never used 0 Overall dimensions: 2200 x 1700 x 1900 mm Weight: 1000 kg Auction-ID: A7-50799-120
Pressure 20 bar, max flow rate 360 l/h, never used Overall dimensions: 300 x 300 x 700 mm Weight: 10 kg Auction-ID: A7-50799-355
With double rotating brush Overall dimensions: 800 x 400 x 400 mm Weight: 20 kg Auction-ID: A7-50799-384
Kalters Radial Piston Pump Setup Supplier: Kalternen Pumps Manufacturer: Beinlich pump systems Manufactured: 2008 Visicosity: 100-1250 mPa.s Max pressure: 200 bar. Medium used for: Glycol, Linseed oil, Acrylates With Lenze series 8200 vector frequency converter (adjustable speeds) With manual and documentation. Auction-ID: A1-50936-219
Sweeper KASTER S13 Automatic electric sweeper with 3 rotating brushes, dust suppression system, equipped with 3 rotating brushes, 48 volt batteries, never used 0 hours Overall dimensions: 1700 x 1400 x 1400 mm Weight: 350 kg Auction-ID: A7-50799-240
With double rotating brush, never used Overall dimensions: 800 x 400 x 400 mm Weight: 20 kg Auction-ID: A7-50798-168
Sweeper KASTER S13 Automatic electric sweeper with 3 rotating brushes, dust suppression system, equipped with 3 rotating brushes, 48 volt batteries, never used 0 hours Overall dimensions: 1700 x 1400 x 1400 mm Weight: 350 kg Auction-ID: A7-50799-55
Automatic electric sweeper with 5 rotating brushes, dust suppression system, equipped with 5 rotating brushes, 48 volt batteries, never used 0 Overall dimensions: 2200 x 1700 x 1900 mm Weight: 1000 kg Auction-ID: A7-50799-10
Sweeper KASTER S13 Automatic electric sweeper with 3 rotating brushes, dust suppression system, equipped with 3 rotating brushes, 48 volt batteries, never used 0 hours Overall dimensions: 1700 x 1400 x 1400 mm Weight: 350 kg Auction-ID: A7-50801-23
Weight 13kg Auction-ID: A7-51245-95
D=90 and 46, weight 16 kg Auction-ID: A7-51245-36
Incl. accessories, consisting of: a.o. Control unit, dimensions (LxWxH) approx: 650x760x1850 mm Control cabinet, dimensions (LxWxH) approx: 3000x700x2450 mm Dispenser, swivelling, dimensions (LxWxH) approx: 1600x2400x2000 mm, diameter approx: 1500 mm Feeder, dimensions (LxWxH) approx: 1600x1100x1500 mm Soundproof cabin, dimensions (LxWxH) approx: 6600x3260x4400 mm, internal dimensions (LxWxH) approx: 4650x3080x4200 mm 2 magnetic belt conveyors 2-hand control Protective fence Auction-ID: A1-51211-9
Karl Storz Dual Two-Level Foot Control 20012630 Manufacturer: Karl Storz Model: 20012630 Reference: 20012630 Condition: Very good condition, fully functional Auction-ID: A1-51275-130
Karl Storz 8546 – Laryngoscope handle with battery Manufacturer: Karl Storz Model: 8546 Configuration: Handle 8546 (ISO 7376, autoclavable, length 12 cm) with rechargeable battery insert 8546 LD1 Battery insert: High-power LED, > 56 lm / > 100 klx, lithium-ion, runtime 240 min at 100% brightness, charging by 8546 LE induction charger (not mentioned as included) Condition: Very good condition, functional tested Auction-ID: A1-51275-144
Power: N/C (electro-pneumatic system) Operating parameters: Workpiece length 250–2,500 mm; max. width 1,200 mm; automatic longitudinal + transverse feeding; electropneumatically controlled cross scale Workpiece capacity: Panels/components of varying dimensions; suitable for furniture & wood processing lines Supported edges: Wood-based panels, MDF, chipboard, plywood (typ.) Edge types: Feeding, positioning, transfer Included equipment: Fully automatic WZ10 pulling system; air cushion table; cross alignment scale; integrated control system Compliance: Industrial woodworking equipment; CE N/C Power supply: Electric + compressed air (electro-pneumatic) Year/Manufacturer: HOMAG – PROFI TBL 100/35/12 Remarks: Designed for automatic handling and precise positioning of workpieces in longitudinal and transverse direction Automatic feeding table with WZ10 system for ef ...
Degree of protection: IP 54 (dust and splash proof) Rated voltage: 400 / 230 V (50 Hz) Battery type: 2x 12 V / 42 Ah (10EP) Battery voltage / capacity: 24 V / 42 Ah Included: 6 cylinder Doosan diesel engine Engine.Number: Edipa 218182 Year of Make: 2012 294 kW 1 x 400 litre diesel tank 1 x KSB sprinkler pump, type: MX 150-200 Auction-ID: A1-51285-330
Auction-ID: A1-51321-19
Karl H. Bartels manual lever handler, model HR IV, for handling loads. Metal structure with double wheels and drawbar with transverse handle. Indicated weight: 25 kg. Maximum capacity indicated on the plate: 1,500 kg. Auction-ID: A7-51362-39
Degree of protection: IP 54 (dust and splash proof) Rated voltage: 400 / 230 V (50 Hz) Battery type: 2x 12 V / 42 Ah (10EP) Battery voltage / capacity: 24 V / 42 Ah Included: 6 cylinder Doosan diesel engine Engine.Number: Edipa 218385 Year of Make: 2012 294 kW 1 x 400 litre diesel tank 1 x KSB sprinkler pump, type: MX 150-200 Auction-ID: A1-51285-331
Including hydraulic coil gripper, not roadworthy, repair planned for next week Auction-ID: A1-51285-434
Auction-ID: A1-51321-3
maximum number of results exceeded
please refine your search
300 € 
