ka used for sale

Additional technical specifications: • Support surfaces right and left: 4000 mm each • operating voltage. 3 x 400 V

Content consisting of an attached vise, jaw width: 125 mm and various hand tools.

Very well preserved bookbinder cardboard scissors, knife without damage. Cleaned and tested. Cutting length 120 cm

Screw compressor Kaeser ESD441 250 kW 10 bar 36.10 m3/min Year of Make: 2007 Operating hours: 120,054 h

KAIR GRINDING MACHINE FEATURES Table length 800 mm Table width 400 mm Wheel diameter 250 mm Wheel width 40 mm Spindle power 2 kW Length x width x total height 4800 × 2000 × 2000 mm Weight 3200 kg

feed pressure: 8,0 bar liter capacity: 2340 l/min Number of working hours: 13382 h voltage: 400 V total power requirement: 15,0 kW weight of the machine ca.: 0,45 t dimensions of the machine ca.: 0,0 x 0,8 x 1,3 m Serial no. 1006 Operating hours run: 26736 Operating hours load: 18261 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 260 mm Rund documentation: vorhanden automatic feeds: ja : ja weight of the machine ca.: 2,2 t dimensions of the machine ca.: 1,7 x 2 x 2 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

1 piece Kallfass feed conveyor (laying conveyor) Year of construction: 2016, delivered 2017 1 piece Kallfass Universa 500 Servo Year of manufacture: 2016, delivered 2017 1 piece Kallfass Shrink Tunnel Compact 650 DD built in 2017, (2 heating bowls at the top and 2 heating bowls at the bottom) 1 piece of removal belt

1 piece Kallfass Shrink Tunnel Standard 650 NT Year of construction 2003

1 piece Kallfass Shrink Tunnel Compact 450 SO Year of construction 2003

Technical data: Welding punch: 450mm permanently heated Punch passage height: max. 150mm Punch Transition: Length Compensation Longitudinal welding: permanently heated welding wedge Foil: Half tube approx. 12-80μm max diameter 400mm Max. film roll width: max. 600mm Conveyor belt: inlet and outlet 400mm wide Product output: up to 85 cycles/min Transport speed: 10-30m/min Working height adjustable: 780-930mm Overall length: 1950mm Overall width: 1650mm Overall height: 1850mm Control Panel: Sytron Colour: Kallfass anthracite Rated Power/ Rated Current: 3.5KVA / 5.1A Power connection: 400Volt DS/ 50Hz with protective conductor

Manufacturer: KAISER Model: V200 WR Year: 1983 Condition: Used Stock Number: 9535 Compressive force: 200 t Table length: 1450 mm Table width: 900 mm Maximum stroke rate upper table: 150 1/min Adjustment of the ram: 100 mm Ram stroke: 20-120 mm Equipment: Sheet metal straightening roller Unwinder Workpiece feeding

Fully automatic side sealing machine UNIVERSA 400 NT Used machine; Year of manufacture 2001 How does it work and stands Description: Fully automatic flow wrapping machine for packaging products – independent length – with full wrapping and without foil overlap. Maximum performance is approx. 40 cycles/min. The product is fed via a conveyor belt at the same time. wrapped in a semi-tubular film over a forming shoulder. The product indexing is done via a horizontally scanning light barrier. The feed belt is set to different product widths can be easily adjusted. After wrapping the product with The foil is cross-welded with a permanently heated welding system. The longitudinal welding is generated by a continuous side welding device. The altitude of the forming shoulder and welding equipment is manually adjustable. The remaining foil strip is picked up on a foil win ...

cutting diameter: 420 mm saw band length: 6300 x 41 x 1,3 mm cutting width: mm table height: mm size of profile - max.: mm cutting speed: 10 - 130 m/min saw band length: 4870 x 27 x 0,9 mm total power requirement: 9,0 kW weight of the machine ca.: 3,4 t dimensions of the machine ca.: 3,5 x 2,35 x 2,1 m Fully automatic band saw - Control Minipos 807 - with chip conveyor The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

KÄRCHER MC-250 Suction sweeper Technical data: Drive type: Diesel Two-wheel drive Engine manufacturer VM Motor power (kW) 75 Euro 6e emission standard Travel speed (km/h) 60 Working width with 2 side brushes (mm) 2625 Working width max. with 3 side brushes (mm) 2710 Waste container (l) 2500 Fresh water tank (l) 200 Fresh water tank (optional) ( ) 390 Permissible total weight (kg) 6000 Dimensions (L × W × H) (mm) 4491 x 1300 x 1999 Particulate filter Comfort seat Heating and air conditioning Heating Waste container: 2500 l Radio system Rotating warning light Water tank: 120, 400 l Year-round use This KÄRCHER MC250 is built in 2020, has only 2,640 total operating hours and 1,820 sweeping hours according to the meter and is in good overall condition with the usual signs of use and wear, immediately ready for use, cf. NP 200.000,-€! - Gross p ...

1978 - recently modernised TECHNICAL DATA: • Max. web width: 1450 mm • Max. unwind diameter 1000 mm • Max. finished reel diameter 400 mm • Hydraulic reel lifting • Circular slitting system • 4 Rewind shafts on two turrets • Pneumatic brake • Length measuring and control system • Optical edge control Machine is completely overhauled, has got new AC Motors, new cabinet and panels; new PLC Siemens S7; new Montalvo pneumatic brake and controls; new edge control for detecting from top and bottom with.

1 Gebr. Hacksaw Kasto, HBS 1, built in 2002 Technical data (KASTO hbs 1) • Saw type: Hydraulic metal hacksaw (semi-automatic) • Cutting range at 90°: ◦ Round: max. 210 mm ◦ Flat (width x height): 240 x 190 mm ◦ Square: 210 x 210 mm • Cutting range at +45° mitre: ◦ Round: max. 150 mm ◦ Flat: 150 x 100 mm ◦ Square: 145 x 145 mm • Saw blade dimensions: 400 x 30 x 1.5 mm • Cutting speeds: 2 steps (16 and 32 m/min) • Motor power: approx. 0.8 kW • Material support height: 500 mm • Machine weight: approx. 170 kg • Dimensions (L x W x H): approx. 1,190 x 480 x 810 mm (lowered) or up to approx. 1,230 mm in maximum position

Complete Karl Schnell GmbH & Co. KG, Germany processing line for the production of processed UHT cheese from natural cheese blocks. The complete processing line is designed for the continuous and efficient processing of natural cheese into a processed cheese product suitable for UHT processing and aseptic filling (ideal for IWS / Triangle and foil wrapped cheese packaging). The line combines the necessary processing equipment for cheese preparation, melting and resting to achieve a consistent final product quality. The line offers a flexible production capacity and is suitable for industrial-scale production of processed cheese products. Capacity of end product of the line: 200 - 750 kg/h output. Year of manufacturing of the complete line: 2011. Project number: AK09-2971. Processing line number: 09-164., The complete line exist out of the following machines:, A) Processed Cheese Blending ...

KÄRCHER MC-250 Suction sweeper Technical data: Drive type: Diesel Two-wheel drive Engine manufacturer VM Motor power (kW) 75 Euro 6e emission standard Travel speed (km/h) 60 Working width with 2 side brushes (mm) 2625 Working width max. with 3 side brushes (mm) 2710 Waste container (l) 2500 Fresh water tank (l) 200 Fresh water tank (optional) ( ) 390 Permissible total weight (kg) 6000 Dimensions (L × W × H) (mm) 4491 x 1300 x 1999 Particulate filter Comfort seat Heating and air conditioning Heating Waste container: 2500 l Radio system Rotating warning light Water tank: 120, 400 l Year-round use This KÄRCHER MC250 is built in 2020, has only 837 total operating hours and 368 sweeping hours according to the meter and is in a very good overall condition with minor signs of use and wear, fresh from the large customer service, immediately ready for use ...

KÄRCHER MIC-50 Municipal equipment carrier with winter maintenance equipment Accessories: 1. FIEDLER FKM snow sweeping brush with maximum clearing width of 140cm 2. KUGELMANN silo spreader with 600l capacity and control panel This KÄRCHER MIC-50 implement carrier is built in 2019, has only 640 total hours or 283 hydraulic hours according to the meter and is in good overall condition with the usual signs of use and wear of this device class. - Net price 37.900,-€ // Gross price 45101,-€ - Inspection / test drive possible - Shipping can be organized nationwide, the costs depend on the distance! - We would be happy to have an attractive leasing / financing offer prepared for you by our leasing partner!

KÄRCHER MIC-50 Municipal equipment carrier with winter maintenance equipment Accessories: 1. KUGELMANN V150/74 Wedge-Vario snow plough with maximum clearing width of 150cm 2. KUGELMANN silo spreader with 600l capacity and control panel This KÄRCHER MIC-50 implement carrier is built in 2017, has 1,340 total hours or 715 hydraulic hours according to the meter and is in good overall condition with the usual signs of use and wear of this device class. - Net price 29.900,-€ // Gross price 35.581,-€ - Inspection / test drive possible - Shipping can be organized nationwide, the costs depend on the distance! - We would be happy to have an attractive leasing / financing offer prepared for you by our leasing partner!

TECHNICAL SPECIFICATIONS: Manufacturer: KARCHER Schiffswerft GmbH Description: Hydraulic folding barge Year of Make: 1966 Load capacity: 200 tons. (approx. 120 cbm) Drive manufacturer: SCHOTTEL-Navigator Drive type: 2 x 5-cylinder diesel engine Total drive power: 100 hp / 74 kW Number of propellers: 2 pcs. Number of anchors: 2 pcs. Number of watertight compartments of the ship: 8 pcs. Overall length: 38.26 m Overall width: 6.62 m Draft approx.: 2.79 m SPECIFIC COMMENT - Fully functional gravel barge - Hull dry - Available now

TECHNICAL SPECIFICATIONS: Manufacturer: KARCHER Schiffswerft GmbH Description: Hydraulic folding barge Year of Make: 1966 Load capacity: 200 tons. (approx. 120 cbm) Drive manufacturer: SCHOTTEL-Navigator Drive Type: Diesel Engine Number of propellers: 1 pc. Number of watertight compartments of the ship: 8 pcs. Overall length: 33.00 m Overall width: 6.50 m Draft approx.: 2.00 m SPECIFIC COMMENT - Fully functional gravel barge - Hull dry - Available now

3 × AMANDUS KAHL 65-1500 Flat Die Pellet Mill – NEW 2025, in original crates Three brand-new AMANDUS KAHL 65-1500 pellet mills (2025), never installed, still in original factory crates. Ready for immediate delivery from Istanbul, Turkey. Kahl’s flagship and the largest flat die pellet mill on the market: up to 12 t/h per mill, up to ~36 t/h for all three. The mills come from a cancelled project and are offered at an attractive price well below the factory price. Package includes: 3 complete pellet mills with hydraulic, lubrication and oil systems EAPR automatic press control with 3 switch cabinets and remote maintenance 12 flat dies 1500 × 100 mm (9 × 8 mm, 3 × 10 mm) 72 pan grinder rollers, 18 breaking arms with knives Technical documentation (EN/TR) Technical data: die diameter 1500 mm, 630 kW drive, 10–12 t/h per mill. Suitable for wood, biomass, straw and gre ...

Hydraulic crimping pliers Burndy Hypress Y35 B20 No more pressing effect. The crimping pliers lay in the workshop for years. The oil and seals should be replaced. The sale is made as a spare part / defective Margin taxation in accordance with § 25a UstG. VAT is not shown separately. Internal NR 672-SB-72 Crimping Tool - Hydraulic Crimper - Lug Press - Crimping Pliers - Crimping Tool - Crimping Tool - Crimper - Crimping Tools

Hydraulic crimping pliers STOCKO 0203468 The pliers press, but no longer loosen. The crimping pliers lay unused in the workshop for years. An overhaul is required. The sale is made as a spare part / defective. Margin taxation in accordance with § 25a UstG. VAT is not shown separately. Internal NR 673-SB-73 Areas of application & details: Hydraulic Crimping Pliers STOCKO 0203468 - Crimping Pliers - Hydraulic Crimping Tool - Cable Lug Press - Crimping Pliers - Crimping Tools

Max. machine speed: 600m/min, min./max. parent roll width: 600mm/1650mm, max. parent roll diameter: 1000mm, max. roll weight: 2000kg, unwind core diameter: 76mm/152mm, min./max. slitting width: 190mm/1200mm, number of winding stations: 6, number of winding stations for slit widths from 600mm: 2, material thickness range for monofilms: 20µm-170µm, laminates: 40g/m²-190g/m², composite materials: up to 200g/m², rewind core inner diameter: 70mm/76mm/152mm. Equipped with shear slitting with upper and lower knives, contact rewinder with individual lay-on rollers, spreader roller, material infeed device, ionization system at the unwinder and rewinder, adjustable guide rollers at the unwinder and edge trim extraction system. Documentation available. Inspection possible by arrangement.

x-travel: 5100 mm y-travel: 3500 mm z-travel: 1100 mm distance between columns: 2700 mm distance table - lower edge spindle: 200 - 1300 mm table-size: 5000 x 2600 mm table load: 17 t spindle motor: 37 /45 kW spindle turning speed range: 6000 U/min tool taper: BT 50 feed in x - axis: 12 mm/min feed in y - axis: 20 mm/min feed range Z-direction: 15 mm/min w-axis: mm control: Fanuc 0i-MF total power requirement: - kVA weight of the machine ca.: - t dimensions of the machine ca.: 13 x 8 x 5,5 m Portal milling machine equipped with: - CNC Control FANUC 0i-MF (10.4 LCD) - ATC 60-fold (BT 50) - X/Y axis roller linear guide way, Z axis box way - Auto head storage: -- 90 degree angle milling head - Coolant thru spindle 50bar - X/Y/Z axis linear scales - Spindle oil cooler - Oil skimmer - Air conditioner - Chip conveyor - Ball Screw Cooling X/Y/Z - Air Blast through Spindle The data for this ad  ...

Key data: 1 kW, 4800 kg, 9 kW

Technical data/equipment: - Cutting area 4,300 x 4,300 mm - Main saw unit 9 kW - Saw blade Ø 320 mm - Max. saw blade protrusion 77 mm - Scoring saw unit 1.1 kW with pneum. Lowering in the return flow - Scoring saw blade Ø 150 mm - Pro-Lock quick-clamping system for main and scoring saw blade - Feed speed infinitely variable 5-100 m/min, return 130 m/min - Material pusher flow 25 m/min, return flow 80 m/min - Autom. Cutting length detection via laser sensor - Autom. Edging device - Stepless electr. Cutting height adjustment - 4-air cushion tables with support rollers, length 2300 mm - 9 package clamps, opening height 75 mm - Control panel/stop side left - Label printers - Weight approx. 4,800 kg - Electrical connection: 400V, 50Hz, 3~, 28A, 9.0 kW, rec. Fuse 32A - Compressed air connection: min. 8 bar permanent, connection 1/2", air consumption 360 NL - Extraction ...

CONTROLS   PLC SIEMENS SIMATIC OP 47-12 PRESS FORCES   total force (nominal): 200 to PRESS TABLE   table surface (left-right): 2440 mm   table surface (front-back): 1500 mm SLIDE   table surface (left-right): 1500 mm   table surface (front-back): 1100 mm   stroke: 180 mm SLIDE (MECHAN. PRESS)   slide adjustment: 150 mm   stroke rate (min.): 20 /min   stroke rate (max.): 120 /min   main drive power: 45 kW OVERALL SPECIFICATIONS (COIL LINES)   sheet thickness max.: 2.5 mm DECOILER   sheet width max.: 300 mm   sheet width (min): 30 mm   coil weight max.: 3 to   max. diameter of coil: 1500 mm   mandrel expansion range from: 460 mm   mandrel expansion range up to: 530 mm LEVELLER UNIT   sheet width max.: 30 mm   sheet width (min): 300 mm   number of leveller rolls: 9   diameter of leveller rolls: 30 mm   number of intermediate rolls: 11   feed  ...

For the production of canisters up to approx. 30 liters for example Year of manufacture: 2005 Screw diameter: 120 mm Max. mold width: 830 mm Max. mold height: 720 mm Min. mold thickness: 2 x 280 mm Max. mold opening stroke: 400 mm Center distances per clamping unit (mm) Double 350 Triple 250 Quadruple 180 Clamping force (kN) 400 Dry cycle time (sec.) 4.1 Max. operating cycles (1/h) 400 Max. transport stroke (mm) 1050 Two identical machines available The machines can be viewed in production; available starting April 2026

Fixed side at the left Feedspeed 18 - 25 m/min Working width min 60mm for panel thickness 22mm, 105mm for panel thickness 40mm Panel overhang 30mm Panel thickness 8 - 60 mm in stead of 12 - 40 mm (with limitations) Coil edge thickness: 0,3 - 3 mm, strips 0,4 - 20 mm Coil diameter 830 mm Equipment: Sprayers release agent Squaring device with 2 motors each 3 kW Edge heating Edge magazine for 2 coils, guillotine for edges up to 3 mm Glueing part A20 with quickmelt application Lateral pressure zone K, 1 driven and 6 after pressing rollers End trims HL84, 2 motors each 0,8kW Rough trimming, 2 motors 1,5kW Contour trimming, 2 exchange units Profile scraping PN10 Flat scrapers FA11 Sprayers cleaning agent Buffing Automation package straight/chamfer: -Automatic adjustment infeed fence -Automatic setting of pressure rollers -Pneumatic setting of end trims -Pneumatic setting of rough trims -Automa ...

Workpiece thickness: 8 - 90 mm, electronically adjustable Feed rate: 18-32 m/min frequency controlled Edge thickness: 0.3 - 3 mm for roll edges, strips up to 20 mm Equipment: Inlet guide automatically adjustable via the control, extension 500 mm Joint milling unit: 2 x 3.0 KW workpiece preheating Gluing unit A34 edging magazine for roll Pressure zone with 1 driven, 6 non-driven rollers, automatic adjustment from the control Cutting unit WK14, straight, 2 motors 0.8 kW Pre-milling unit: 2 x 1.5 KW, pneumatic adjustment Form milling unit FF 12 automatic, 2 motors 0.4 kW radius/phase milling unit FF12 automatic 4 motors 0.4 KW universal milling aggregate controlled UF11, 4 kW Profile scrapers PN20 Glue scrapers Nozzles for detergent and anti-stick Polishing unit Control: Power Control PC22

Fixed side at the left Feedspeed 18 - 25 m/min Working width min 60mm for panel thickness 22mm, 105mm for panel thickness 40mm Panel overhang 30mm Panel thickness 8 - 60 mm in stead of 12 - 40 mm (with limitations) Coil edge thickness: 0,3 - 3 mm, strips 0,4 - 20 mm Coil diameter 830 mm Equipment: Sprayers release agent Squaring device with 2 motors each 3 kW Edge heating Edge magazine for 2 coils, guillotine for edges up to 3 mm Glueing part A20 with quickmelt application Lateral pressure zone K, 1 driven and 6 after pressing rollers End trims HL84, 2 motors each 0,8kW Rough trimming, 2 motors 1,5kW Contour trimming, 2 exchange units Profile scraping PN10 Flat scrapers FA11 Sprayers cleaning agent Buffing Automation package straight/chamfer: -Automatic adjustment infeed fence -Automatic setting of pressure rollers -Pneumatic setting of end trims -Pneumatic setting of rough trims -Automa ...

A filling machine with packer is available, 1) Filling machine Shikoku Kakoki S-PS65UC, compressed air connection: 588-882kPa, compressed air consumption: 1,300Nl/min, electrical connection: 148A, operating hours: 56,823h, suitable for milk, yogurt, fruit yogurt and similar products, 2) Packaging machine Tetra Pak TETRA CARDBOARD PACKER 70, wrap-around carton formats: 250, 500, 1000ml, year of manufacture: 2004, an on-site inspection is possible.

Battery head machines for containers up to 120 ltr. Extruder 80/20 D. Battery head 5 ltr. Clamping force 500 kN (approx 50 metric tons) Moog TMC 4 control

Battery head machine for containers up to 220 ltr. Extruder S 100/24D. Battery head 8 ltr. Clamping force 1,000 kN (approx 100 metric tons) Control SIG Kautex.

Screw Compressor - Kaeser CSD105 Description: Very good technical condition Operating hours: 15,000 h Power: 55 kW Max. pressure: 8 bar The device has been regularly serviced by an authorized Kaeser service center in Italy All offered devices are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical tests at our company in Łódź. Price: On request

Key data: 80 mm

KASHIFUJI KN80 CNC Gear Hobbing Machine The Kashifuji KN80 is part of our exclusive inventory of gear hobbing machines, all owned and serviced by our company. As international CNC machinery specialists, we offer industry-leading guarantees and professional support. Specifications CNC Control: Fanuc 31i Model B CNC Controlled: Yes Maximum Gear Diameter: 3.14” (80 mm) Maximum Pitch: 4 Machine Configuration: Vertical Z-Axis Travel: 7.87” (200 mm) Hob Speed: 2,650 RPM Table Diameter: 6.69” (170 mm) Table Bore: 2.95” (75 mm) A-Axis Trunnion Tilt Range: ±45° Y-Axis Travel: 5.11” (130 mm) C-Axis Speed: 330 RPM Overall Dimensions (L × W × H): 61” × 102” × 98” Machine Weight: 14,000 lbs.

Offer 26316 Screw compressor with integrated refrigerant dryer + air tank Technical data: - SIGMA CONTROL control - Operating hours approx. 22633 h - Load hours approx. 10983 h - Operating pressure 11 bar - Delivery rate 3.5 m³/min. - Engine speed 2960 1/min - Drive 400 V / 18.5 kW - Integrated refrigeration dryer - Space requirement approx. W 800 x D 1650 x H 1550 mm - Weight approx. 650 kg - Oewamat - Compressed air boiler make OKS , 500L , year 2021 - Compressed air filter

Manufacturer: Kallfass GmbH Type: P5 4040/400 NT Year of Make: 2003 Technical data: Welded frame dimensions: 400 x 400 mm Film roll width: max. 500 mm Working height: 870 - 970 mm Power connection: 380 V three-phase current Easy-to-use angle welding machine, combined with shrink tunnel. Particularly robust design for industrial use. Welded frame dimensions 400 x 400 mm. Proven impulse welding technology with Teflonized cutting wire for absolutely odour-free operation. Equipped with a locking mechanism as a automatic pressure system for exact compliance with the set welding time and problem-free cut-off welding even of thick foils. Visits and demonstrations are possible by appointment in our premises.

Powder Coating Booth with Filter Trolley & Fluid Bottom For sale is a professional, industrial powder coating system from the traditional manufacturer Gema Volstatic. It is the proven MRS system (Multirecover System), which ensures highly efficient powder recovery (overspray extraction) and clean work in the workshop. The system is extremely robustly built and is ideal for manual operation (hand coating) thanks to the generous hand coating opening. Technical data & connected loads: • Manufacturer: Gema Volstatic AG • System / Type: MRS Cabin with Filter Trolley and Fluid Bottom • Electrical connection: Voltage 3 x 380 V / 50 Hz (standard three-phase current) • Compressed air connection (inlet pressure): min. 6 bar / max. 10 bar (recommended pressure: 7 bar) • Compressed air quality: water vapour content max. 1.3 g/m³, oil content max. 0.1 ppm • Compre ...

saw blade diameter: 315 x 2,5 x 32 mm cutting diameter: 100 mm cutting speed: 33/66 m/min height of material-table: 900 mm total power requirement: 1,8 kW weight of the machine ca.: 0,3 t dimensions of the machine ca.: 1,05 x 0,50 x 1,80 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Kaeser BSD 62 screw compressor, year 2002, 7.5 / 10 bar, approx. 6.2 m³/min, 37 kW, Sigma Control. Used, functional and immediately available. Last overhaul and service in 2024. Location: 3525 Lugendorf, Austria.

Hacksaw, hacksaw machine -Manufacturer: Kasto, hydraulic mobile bow saw with coolant system -Type: BSM 253 -Power: 1.5 kW -Cutting speed: 3 levels -Max. cutting height: 205 mm -Max. cutting width: 255 mm -Clamping stock: swivels 45° -Saw blade: Length 400 mm -Quantity: 2 hacksaws available -Price: per piece -Machine dimensions: 1300/640/H1115 mm -Weight: 338 kg

For sale is a fully functional Kallfass UNIVERSA 8060/100 film packaging machine including shrink tunnel and conveyor technology. • Year of construction: 1996 • Operating voltage: 400 V • Used, good condition with signs of wear and tear • Immediately available Visits and functional demonstrations are possible by appointment. Pick-up only in 48599 Gronau (Westphalia). Pick-up, dismantling and transport by arrangement. Price: € 2,999 If you are interested, please contact us.

Compactor/ Compactor/ Waste Compactor Kaelble VG 27 Built in 1994 Scania diesel engine type DS 1166 (219 kW/ 299 hp) 28.85 t ready for use Net price ex location 24,900,-- € + VAT Sale from location D - Schleswig-Holstein Code Q18

KASTO win A 4.6 Automatic Metal Band Saw Description: Automatic metal band saw with hydraulic material clamping, infinitely variable cutting speed. General Technical Data Manufacturer: KASTO Type: KASTOwin A 4.6 Year of Manufacture: 2017 Machine No.: 6710 104 051 Cutting Range Cutting range round (90°): 460 mm Cutting range flat (90°): 460 × 460 mm Smallest section length: 10 mm Smallest dimension to be cut: 10 × 10 mm Shortest remnant length (automatic operation): 35 mm Shortest remnant length (single cut): 10 mm Sawing Performance Saw motor power: 4 kW Total connected load: 6 kW Cutting speed: 12–150 m/min Saw blade dimensions: 6,096 × 54 × 1.3 mm Alternative saw blade dimensions: 6,096 × 41 × 1.3 mm Material Feed and Roller Conveyor Material feed length single: 500 mm Multiple feed: 9,999 mm Machine roller conveyor: 1,100 mm Number of transport rollers ...

capacity 90 degrees: round: 430 mm capacity 90 degrees: square: 340x340 mm capacity 90 degrees: flat: 460x335 mm Cutting area at 45 degrees right: round: 320 mm Cutting range at 45 degrees right: square: 320x320 mm Cutting range at 45 degrees right: flat: 320x320 mm capacity 60 degrees: round: 240 mm capacity 60 degrees: square: 220x220 mm capacity 60 degrees: flat: 210x230 mm min. dia.: Ø 6 mm table height: 700 mm dimensions of saw-band: 5090x34x1,1 mm cutting speed: 32/64 m/min total power requirement: 3,5 kW weight of the machine ca.: 1.050 kg dimensions of the machine ca.: 2700x1250x1400 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 3100 mm y-travel: 1500 mm z-travel: 800 mm Control: FANUC 0i-MF PLUS table-size: 3000 x 1400 mm spindle taper:: BT 40 spindle turning speed range: 12000 U/min spindle motor: 15 / 18,5 kW rapid traverse: 20 / 20 / 15 m/min distance between columns: 1650 mm workpiece weight: 4000 kg total power requirement: - kVA Total weight, approx.: 25 t dimensions of the machine ca.: 6,3 x 3,3 x 4,3 m Portal- Vertical BAZ , equipped with: - CNC control FANUC 0i-MF PLUS(10.4”LCD) - 40-position tool changer (BT 40) - Air thru spindle - Spindle oil cooler - Air conditioner - Chip conveyor + bucket - Heidenhain 3 axis linear scale + air blast - 3 axis linear guide way - BLUM tool measuring system - 4th Axis Wiring - FANUC 4th a12i/3000rpm motor+H105 drive The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.