We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
124,333 used machines on RESALE, but how to find them? Machine Search
maximum number of results exceeded > 1000
please refine your search
used
Key data: 3600 , 440
2 KATO Alternator 60hz /900 RPM 3,800 kva / 13,800 volts new, never used . marine specifications
used
cutting diameter: 100 - 320 mm saw band length: 4670 mm cutting width: 580 mm cutting speed: 16-160 m/min dimensions of saw-band: ca. 4670 x 38 mm : 100 x 320 / 100 x 460 mm total power requirement: 7,4 kW weight of the machine ca.: 3,0 t dimensions of the machine ca.: 2,8 x 2,9 x 2,2 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
cutting diameter: 280 mm saw band length: 4930 mm table height: 680 mm cutting width: 280 mm capacity 90 degrees: round: 280 mm capacity 90 degrees: flat: 280 x 280 mm capacity 90 degrees: square: 280 mm cutting speed: 17 - 90 m/min total power requirement: 5,0 kW weight of the machine ca.: 1750 t dimensions of the machine ca.: 2750 x 2400 x 1850 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
KARL SCHNELL KS ultra-fine shredder Type: FD 225 2 plate system with handwheel adjustment Engine: 90 kW Completely overhauled
used
KAESER BSD 72 Nominal pressure: 8 bar Rated Power: 37kW Refrigeration dryer TD 61 Activated carbon adsorber ACT 133
used
PROD. KAESER TYP FSD 571 S/N 1076 ROK 2008 MOC (kW) 315 WYDAJ. (m3/min) CIS (bar) 8 GODZ (DOC/OGÓL) ok 37000 FALOWNIK nie WBUD. OSUSZACZ nie WYMIENNIK nie CHŁODZONA (POW/WODA) NA ZBIORNIKU nie DOKUMENTY nie PRZYŁĄCZE 2 NOWA/UŻYWANA UŻYWANA
used
TECHNICAL SPECIFICATIONS Manufacturer: Förderanlagen-Maschinenbau Kanert Name: Conveyor belt Version: stationary Wheelbase: 20,000 mm Strap width: 650 mm Year of construction: 2015 Drive power: 11 kW Drive type: STIEBEL slip-on gearbox Support: free supporting structure Catwalk: single-sided Handover: baffle plate / synthetic Belt tension: Tension carriage Top chord cover: no Segment length: 1 x 2,000 mm / 1 x 8,000 mm / 1 x 13,000 mm SPECIFIC COMMENT - Very good technical condition
used
PROD. KAESER TYP FSD 571 S/N 1043 ROK 2007 MOC (kW) 315 WYDAJ. (m3/min) CIS (bar) 8 GODZ (DOC/OGÓL) ok 34000 FALOWNIK nie WBUD. OSUSZACZ nie WYMIENNIK nie CHŁODZONA (POW/WODA) NA ZBIORNIKU nie DOKUMENTY nie PRZYŁĄCZE 2 NOWA/UŻYWANA UŻYWANA
used
Tool holder, milling holder, milling tool -Number: 8x SK50 mounts -different designs -Brill chucks: flat chucks, reducing sleeves, cutter head, shell end mill, spindle tool -suitable for tool changers -is only sold complete -Weight: 32 kg
used
Tool holder, milling holder, milling tool -Number: 14x SK50 mounts -Tool holder: Ø 36 mm -Brill chucks: flat chucks, reducing sleeves, cutter head, shell end mill, spindle tool -suitable for tool changers -is only sold complete -Dimensions: 800/315/H650 mm -Weight: 62 kg
used
Centrifugal fan, centrifugal fan, centrifugal fan ELEKTROR, KARL W. MÜLLER Type: D 1 ( D1 ) Fan wheel diameter: Ø 24 mm 5 m3/min 1,0 kPa Motor : 0.12 kW 2750 rpm 220 / 380 V 3 AC 50 Hz IP44 Ø 82 / 110 mm Output flange: Ø 65 / 1115 mm bolt circle diameter: 96 mm, 4x bore: Ø 10.2 mm fan base: 158 x 120 mm used, tested ! Dimensions: 320 x 240 x 330 mm
used
Centrifugal fan, centrifugal fan, centrifugal fan ELEKTROR, KARL W. MÜLLER Type: D 4 ( D4 ) Fan wheel diameter: Ø 340 mm 11,3 m3/min 2.0 kPa Motor : 0.5 kW 2800 rpm 230 / 400 V 3 AC 50 Hz IP54 Intake connection: Ø 110 / 128 mm outlet flange: Ø 80 / 130 mm bolt circle diameter: 112 mm, 4x bore: Ø 11.2 mm fan base: 230 x 190 mm used, tested ! Dimensions: 430 x 340 x 470 mm
used
KAESER SK 26 compressor system • KAESER SK 26 screw compressor • Effective flow rate 2.27 m³/min. • Pressure 8.5 bar • Motor power / speed 15 kW / 3000 rpm. • KAESER – CONTROL – Command • Compressed air boiler 2,000 liter boiler capacity with automatic steam trap • Compressed air – TB 45 refrigerant dryer, volume flow 4.5 m³/min., automatic steam trap, nominal power 1.05 kW, voltage 230 V / 50 HZ, bypass and hose line to the boiler • Oil-water separator AQUWAMAT 4 Machine technically and optically in very good condition
used
Compressor spare parts KAESER AFVM 18 ( AFVM18 ) 893358.00010 450 bar Dimensions: 200 x 250 x 170 mm
used
Closing element for check valve, closing element KAESER 892268.0 DN300 New ! Dimensions: 490 x 170 x 35 mm
used
Safety valve, angle safety valves, pressure relief valve KAESER, KUNKLE VALVE Type 337 - H P: 970 mbar Connections: 2 New ! Dimensions: 185 x 117 x 132 mm
used
Safety valve, angle safety valves, pressure relief valve KAESER, KUNKLE VALVE Type 337 - H P: 1000 mbar Connections: 2 New ! Dimensions: 185 x 117 x 132 mm
used
Compressor control, control KAESER KOMPRESSOREN ESA 300 2x Time relay: SCHARCO ELEKTRONIK Type: UIPE 1x Circuit breaker: SQUARE D Type: TD0,54 1x contactor: SQUARE D Type: PR1.11E 1x contactor: SQUARE D Type: PR1.20E 1x contactor: SQUARE D Type: PC3.10E with auxiliary switch Type: PW22 in control box: 355 x 255 x160 mm without key ! used, tested ! Dimensions: 375 x 255 x 190 mm
used
Safety valve, angle safety valves, pressure relief valve KAESER, KUNKLE VALVE Type 337 - J P: 520 mbar Connections: 2 1/2 New ! Dimensions: 210 x 151 x 164 mm
used
Safety valve, angle safety valves, pressure relief valve KAESER, KUNKLE VALVE Typ 337 - J P: 610 mbar Connections: 2 1/2 New ! Dimensions: 210 x 151 x 164 mm
used
Safety valve, angle safety valves, pressure relief valve KAESER, KUNKLE VALVE Type 337 - J P: 650 mbar Connections: 2 1/2 New ! Dimensions: 210 x 151 x 164 mm
used
Machine Details Stock-No. 1105-03900 Type of machine Machining Center - Vertical Make KAFO Type Vmc 106 Year of manufacture 2006 Type of control CNC Storage location HAGUENAU FRANCE Country of origin Taiwan Delivery time immediately Freight basis ex stock HAGUENAU FRANCE Technical details X-Travel 1020 mm Y-Travel 600 mm Z-Travel 635 mm CNC-control FANUC - IO table-size 1250 X 600 mm spindle taper ISO 40 spindle turning speed range 10000 rpm spindle drive motor 11 kW tool change unit 24 max. table load 1000 kg throat 510 mm voltage 380 V Rapid speed 12 m/min feed range 1 - 5000 mm/min Weight of the machine approx. 4.6 t dimensions of the machine approx. 3.2 x 2.70 x 2.70 m Accessories instruction book Additional information control: FANUC - O I MC - coolant equipment CHIP CONCOYER 10000 RPM
used
Used thermoshrink packaging machine by Kallfass UNIVERSA 400 ECO including shrink tunnel Compact 450-SO.
used
Capacity (x): 25 Process Application: 25 Other Info: - Heavy Duty industrial trailer KAMPA - SLA Mini VRA MACH-ID 7685 Make:KAMPA Type:SLA Mini VRA Year:2013
new
turning diameter over bed: 410 mm turning diameter over slide rest: 240 mm turning length: 1000 mm turning diameter in the gap: 530 mm turning speeds: 65 - 1810 U/min centre height: 205 mm spindle bore: 52 mm tailstock quill taper MT: 4 total power requirement: 2,2 kW weight of the machine ca.: 0,9 t dimensions of the machine ca.: 1,9 x 0,8 x 1,3 m Center lathe with: 3-axis digital measuring system fully assembled electromagnetic main spindle brake auto. Feed in longitudinal and transverse direction safety relay Micrometer end stop coolant device 3-jaw lathe chuck with 1 set of turning and drilling jaws German operating instructions. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
new
bore capacity in steel (diameter): 30 mm throat: 260 mm bore stroke: 135 mm spindle taper MT: 3 MK table:: 420 x 350 mm column diameter: 135 mm turning speeds: 125 - 3030 U/min feeds: 0,1 - 0,2 - 0,3 mm/U total power requirement: 1,1 kW weight of the machine ca.: 380 kg. range L-W-H: 0,9 x 0,55 x 2,2 mm High-quality drill press with a high speed range for the industrial use. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Angle welding machine with conveyor belt, Fabr. Kallfass
used
Curve 90 for transport track ,Fabr. Kaak
used
Bread/cake slant, double-sided, mobile
used
Pretzel strand machine , Fabr. Kasper Universe
used
PROD. KAESER TYP DS201 S/N 1001 ROK 2002 MOC (kW) 110 WYDAJ. (m3/min) 22 CIS (bar) 10 GODZ (DOC/OGÓL) ok 17500
used
PROD. KAESER TYP CSD122 SFC S/N 5189 ROK 2011 MOC (kW) 75 WYDAJ. (m3/min) 2,20 -10,50 CIS (bar) 8,5
used
PROD. KAESER TYP BSD81 S/N 1432 ROK 2009 MOC (kW) 45 WYDAJ. (m3/min) 7.12 CIS (bar) 8 GODZ (DOC/OGÓL) 12304 / 20984
used
Refrigeration dryer, compressed air dryer with oil-water separator KAESER TB 19 ( TB19 ) Operating pressure: max 15 bar Operating pressure HD: max 25 bar Nominal voltage: 230 V 1AC 50 Hz Nominal current: 3,,65 A Ambient temperature: 5 - 43 °C - Water separator: AQUAMAT 1 Mat.Nr.: 5.2648.00010 without refrigerant ! used, tested ! Dimensions ( refrigerant dryer ): 620 x 540 x 1340 mm Dimensions ( oil water separator ): 360 x 230 x 530 mm
used
Compressor Kaeser DS 200 ( DS200 ) Volumetric flow: 16,75 m3/min Discharge pressure: 10 bar Operating hours: 110372 Load hours: 7436 Drive power: 110 kW Weight: 2.3 t Year of construction: 1993 used, tested ! Dimensions: 2400 x 1630 x1820 mm
used
cutting diameter: 360 mm saw band length: mm cutting width: mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
new
cutting diameter: 250 mm saw band length: 3150 x 27 x 0,9 mm table height: 750 mm cutting width: 170 x 310 mm cutting speed: 25 - 90 m/min : 130 mm : 130 mm : 205 mm Impact energy: 205 mm connected load frequency: 400 Volt total power requirement: 1,5 kW weight of the machine ca.: 0,5 t dimensions: 0,95 x 1,16 x 1,98 m Solid band saw - Double miter cuts on the right up to 60°, on the left up to 45° - AutoCut - Vice with quick clamping device - Belt tension control - Electric automatic cooling system - Material stop max 600mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
KAWASAKI 3CP180L-AC03 palletizing robot manufactured in 2018, increases the productivity of production lines in many industries by automating the process of palletising products. This extremely reliable KAWASAKI CP180L packaging robot is distinguished by its short cycle times, wide movement range and 4 dynamic axes with high axial speeds necessary to quickly move goods with a total weight of 180 kg. Outside the working area of the machine there is a convenient and easy-to-use controller, whose high funcionality allows the robot to be used comprehensively in the production process. The KAWASAKI industrial robot weighs 1600 kg. Technical specifications of the KAWASAKI 3CP180L-AC03 robot - number of axes: 4 - arm reach: 3255 mm - maximum payload: 180 kg - palletising capacity: approx. 1800 cycles/hour - axis movement range JT1 axis: ± 160° JT2 axis: +95° / -46° JT3 axis: +15 ...
used
KAWASAKI 3RS050N-BC02 palletizing robot built in 2018, is designed to increase the productivity of production lines in many industries by automating the process of palletising products. This 6-axis packaging robot features a compact design with a sturdy arm and a long reach, guaranteeing fast handling of goods weighing a maximum of 50 kg. The total weight of the machine is 555 kg. Technical specifications of the KAWASAKI 3RS050N-BC02 industrial robot - number of axes: 6 - arm reach: 2100 mm - maximum payload: 50 kg - axis movement range JT1 axis: ± 180° JT2 axis: + 140° / -105° JT3 axis: + 135° / -155° JT4 axis: ± 360° JT5 axis: ± 145° JT6 axis: ± 360° - axis motion speed JT1 axis: 180°/s JT2 axis: 180°/s JT3 axis: 185°/s JT4 axis: 260°/s JT5 axis: 260°/s JT6 axis: 360°/s - repeatability: ± 0.06 mm - mounting: floor, ceiling - power requirement: ...
used
Belt conveyors GF 2250-680/600 with 2 x 90° pushers (from slides) Make: Kannegiesser like new, showroom machine Year 2014 Length: 2.250 mm Belt width: 600 mm Total width: 680 mm incl. 2 piece pneumatic 90° off valves Wxh = 550 x 320 mm incl. 2 PCs. supports, height OK belt + 1000 mm Features: Construction year: 2014 condition: as good as new (used) Conveying length in mm: 2250 Nominal / outside width in mm: 680 Belt width in mm: 600 Driven: YES scope of delivery: including supports without side guides, including 2 pneumatic 90 ° pushers / pushers 550 x 320 mm (WxH) Für eine individuelle, fachmännische Beratung setzten Sie sich einfach mit uns in Verbindung. Kontaktieren Sie uns einfach telefonisch oder per Mail. Wir helfen Ihnen gerne bei der Planung und Umsetzung Ihrer Projekte. Wir freuen uns darauf von Ihnen zu hören. Mit freundlichen Grüßen Ihr Team der Dr. Sonntag GmbH & ...
used
Kannegiesser GF 2500-890-800 RA1255 The Kannegiesser belt conveyor is from 2014 and is in a new (used) condition. It has 13 white striped straps made of 2-layer PET on an edged, expiring stainless steel sheet construction. Technical data: Manufacturer: Kannegiesser Type: Belt conveyor 800 Built: 2014 Condition: very good (used) Engine: fully functional Length: 2500 mm (measurement stretched over everything) Belt width: 50 mm (13 pieces) Scaffolding width: approx. 890 mm Height/strip curve: from 175 mm up to 750 mm Number of support feet: 2 pieces on rollers Load: 30 kg Conveyor speed: 0.6 m / s constant Drive: Spur gear motor Electrical data: 0.37 kW 230 / 400 V 60 Hz Deflection drum: diameter = 50 mm, stainless steel Belt reel roll: diameter = 50 mm, stainless steel Belt: 2-layer PET belt, white Design: CNC - lasered and edged stainless steel sheet construction. Material: 1.4016 ...
used
Kannegiesser belt conveyor belt conveyor with DUO-Pusher GF 2500-680-600 RA1309 The Kennegisser belt conveyor is from 2015 and in good (used) condition. In addition, it is 2500 mm longer and equipped with a DUO pusher (sorting pusher). The pusher is used to sort laundry items according to selected criteria. The folded laundry item is pushed by a pusher plate onto a following conveyor or a roller conveyor. 2 support feet are included in delivery. Technical data: Conveying length (NL): 2500 mm Framework width (NB): approx. 680 mm belt width (GuB): 600 mm Height / Belt run (BH): 850 mm +/- 90 mm Number of support feet: 2 pieces Conveying speed (v m/s): 0.1 - 1.1 m/s, reversing operation with FU Drive: Normal Motor Electrical data: 400 V / 50 Hz Deflection drum (UT): Ø = 60 mm belt return roller: Ø = 50 mm Belt: 2-layer PVC belt, black, smooth Year of construction: 10/2015 Special featur ...
new
cutting diameter: 220 mm saw band length: 2520 x 27 x 0,9 mm cutting speed: 25 - 90 m/min table height: 915 mm cutting width: 150 x 240 mm : 90 mm : 90 mm : 150 mm Impact energy: 150 mm connected load frequency: 400 Volt total power requirement: 1,2 kW weight of the machine ca.: 0,35 t dimensions: 1,4 x 0,8 x 1,5 m Rock solid band saw - Miter cuts up to 60° - AutoCut - Vice with quick clamping device - Belt tension control - Electric automatic cooling system - Material suggestion - Coolant pump The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Year of construction: 1998 Rated Power: 11 KW 10 bar Good condition
used
Year of construction: 2001 Economical refrigeration dryer for drying compressed air up to a pressure dew point of 3 °C. Use in an ambient temperature up to +43°C. Large condensate separator and electronic steam trap ECO-DRAIN
used
PROD. KAESER TYPE ASD50 T SFC S/N 1442 YEAR 2014 POWER (kW) 25 OUTPUT (m3/min) 1.07-5.27 CIS (bar) 8.5 HRS (DOC/GENERAL) 12822/15055 WAVES yes BUILT. DRYER yes
used
Good working conditions
used
PROD. KAESER TYP CSD122 SFC S/N 5189 ROK 2011 MOC (kW) 75 WYDAJ. (m3/min) 2,20 -10,50 CIS (bar) 8,5
used
PROD. KAESER TYP ASD47 SFC S/N 3068 YEAR 2013 POWER (kW) 25 EFFICIENCY (m3/min) 1.07-5.27 PRESSURE (bar) 8,5 INVERTER YES EXCHANGER YES
used
MADE BY KAESER TYPE AIRCENTER SK22T S/N 2324 YEAR 2012 POWER (kW) 11 SPEND. (m3/min) 1.85 PRESSURE (bar) 8 INVERTER no WBUD. DEHUMIDIFIER yes EXCHANGER no COOLED (POW/WATER) air ON THE TANK yes 350 L