ka used for sale

cutting diameter: 250 mm saw band length: 3150 x 27 x 0,9 mm table height: 700 mm cutting width: 250 x 320 mm cutting speed: 25 - 90 m/min dimensions of saw-band: 2480 x 27 x 0,9 mm : 120 mm : 120 mm : 190 mm Impact energy: 190 mm connected load frequency: 400 Volt total power requirement: 1,5 kW weight of the machine ca.: 0,5 t dimensions: 0,95 x 1,16 x 1,98 m Rock-solid band saw for solid material - Double miter cuts up to 60° - AutoCut - Vice with quick clamping device - Belt tension control - Electric automatic cooling system - Material suggestion The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 250 mm turning diameter over slide rest: 130 mm turning length: 550 mm turning speeds: 50 - 2000 U/min centre height: 125 mm spindle bore: 20 mm tailstock quill taper MT: 2 tailstock quill stroke: 60 mm metric threading: 0,4 - 3,0 mm thread - inch: 10 - 44 TPI thread - module: 0,2 - 12,5 mm connected load frequency: 230 V total power requirement: 1,0 kW weight of the machine ca.: 0,12 t dimensions of the machine ca.: 1,09 x 0,59 x 0,45 m Equipped with - 20 mm spindle passage - adjustable guideways - Powerful 1.0 kW motor - continuously variable speed Scope of delivery: - 3-jaw chuck 100 mm, - 4-jaw faceplate chuck 125mm - standing and rotating bezel - Splash guard - Feed protection The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

SALMON BELLY SLICER, KAJ OLESEN A/S, TYPE TRIM-UNIT Technical description: Serial number: 11-01 Power supply: 3X400 V; 3,0A Bandwidth: 590 mm Dimensions: 2600 mm X 1150 mm x 1300 mm

A 6-color Kammann screen printing machine is available. Disk diameter: 120mm, cycle time: 75 cycles/min, colors: 6, UV dryer: 4, number of spindles: 2x8. Documentation available. On-site inspection is possible.

Cooling capacity: 850kW, motor power: 2.7kW/15.5kW, motor type: M 3AA 160L, speed: 735rpm/1460rpm, water temperature outlet: 48°C, ambient air temperature: 40°C, material: stainless steel, weight: approx. 3000kg. Documentation available. On-site inspection is possible.

There are 3x Kaeser compressors, 2x Atlas Copco compressors and 3x Kaeser refrigeration dryers available. 1) Compressor Kaeser CS 75, year of manufacture: 1992, operating pressure: 10bar, operating hours: 38265h. 2) Compressor Kaeser AS 44, year of manufacture: 1999, operating pressure: 8.5bar, operating hours: 41564h. 3) Compressor Kaeser BS 60, year of manufacture: 1983, operating pressure: 7.5bar, operating hours: 50674h. 4) Compressor Atlas Copco GA 45, year of manufacture: 1990, operating pressure: 10bar, operating hours: 26831h. 5) Compressor Atlas Copco GA 45, year of manufacture: 1990, operating pressure: 10bar, operating hours: 52447h. 6) Refrigeration dryer Kaeser TD 51, year of manufacture: 1997, refrigerant: R22. 7) Refrigeration dryer Kaeser TF 171, year of manufacture: 2000, refrigerant: R134a. 8) Refrigeration dryer Kaeser TE 76, year of manufacture: 1996, refrigerant: R22 ...

Two compressed air tanks are available. 1) Karl Kremsmüller u. Co., year of construction: 1980, operating pressure: 7bar, test pressure: 9.1bar, operating temperature: 20°C, medium: compressed air, capacity: 5300l. 2) Engelbert Dax, year of manufacture: 1973, capacity: 15000l, operating pressure: 4ATÜ, test pressure: 5.2ATÜ. On-site inspection is possible.

A Kaeser compressor, a Kaeser refrigeration dryer and an ABB DC motor are available. 1) Oil-lubricated screw compressor Kaeser SM 11, year of manufacture: 1998, serviced: 2023, operating pressure: 10bar, volume flow: approx. 1100l/min, power: 7.5kW, machine dimensions X/Y/Z: approx. 600mm/650mm/850mm, weight: approx. 200kg. 2) Refrigeration dryer Kaeser TA 5, year of manufacture: 2012, serviced: 2023, refrigerant: R134a, operating pressure: 16bar. The condensate drain is defective. 3) DC motor ABB DMP 180-4LB, year of manufacture: 1998, power: 114.7kW, speed: 1800rpm, operating mode: continuous operation, insulation class: H-Rise F, weight: approx. 450kg. On-site inspection is possible.

Volume: 2900kg/6400l, length: 6000mm, diameter: 1250mm, height: 1400mm, filling: liquid gas according to DIN 51622/EN589, max. filling level: 85%, test pressure: 22.3bar, max. permissible pressure: 15.6bar, permissible temperature min./max.: +20°C/40°C, storage: above ground. Including foundation plates (2400mm/1200mm/120mm) and steel frame. Documentation available. On-site inspection is possible.

Sweeping width: 1250mm, Sweeping brush: Roller brush, drive: hydrostatic, oil capacity: 25l, power: 6.7kW, machine dimensions X/Y/Z: approx. 1800mm/1300mm/1400mm, weight: approx. 1000kg, operating hours: 1063h. On-site inspection is possible.

A complete material conveyor system for plastic granulate is available. Components: Control system for 10 end devices, side channel compactor with filter and six color dosing devices for direct coloring, six material conveying pots. On-site inspection is possible.

diamter spiral cutter: 70 - 250 mm spiral lenght: 20.000 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bearing diameter: Ø 380 - 1030 mm weight max. in kg: 1400 kg Dimensions (L/W/H): 3000 3000 mm weight: 1500 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

cutting diameter: Ø 340 / 340290 mm band length: 600 52 2,5 mm cutting lenght max.: x 600 mm total power requirement: 6 kW weight of the machine ca.: 2 t dimensions of the machine ca.: 2,52,51,5 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pulling force - max.: 25 t max. ram stroke: 1500 mm max. workpiece diameter: 630 mm cutting speed: 1,5 - 7 m/min return speed: 7 - 25 m/min workpiece height max.: 360 mm tool diameter: 130 mm Shank diameter: 70 mm table surface area: 600 x 600 mm Control: distance between columns: 635 mm total power requirement: 18,5 kW weight of the machine ca.: 9,5 t dimensions of the machine ca.: 1,1 x 1,7 x 5,2 m Machine was hardly ever used, not even in single-shift operation. - 3 broaching positions, can also be used individually - Hydraulic drive - without tools or other accessories The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Offer 25101 Specifications: - Cutting range at 90° around 400 mm - flat W 400 x H 400 mm - Cutting area at 45° flat W 320 x H 320 mm - Cutting area at 60° flat W 210 x H 320 mm - Material support height approx. 700 mm - Saw blade dimensions 5090 x 34 x 1.1 mm - Cutting speed infinitely variable 17 - 90 m/min - hydr. Lifting – lowering the saw frame - Cutting pressure infinitely adjustable 0 - 10 m/min - Total drive power 400 V / 3.5 kW - Coolant device - Roller conveyor feeder 7000 mm - Discharge – roller conveyor with stop + digital display 4000 mm - Space requirement approx. W 2000 x H 1400 x D 2800 mm - Weight approx. 1200 kg

Digital Grinding diameter 250 mm Grinding length 650 mm Accessories

max. grinding diameter: / mm grinding length: / mm workpiece length: / mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel (diameter): 25 mm throat: 255 mm bore stroke: 135 mm spindle turning speed range: 8, von 105-2900 U/min table-size: 500 x 350 mm column diameter: 100 mm spindle taper: MK 3 total power requirement: 0,65 / 0,9 kW weight of the machine ca.: 190 kg dimensions of the machine ca.: 0,5 x 0,5 x 1,7 m Electric 380 Volt: Drill chuck: Unused exhibition machine at a special price: New gear machine, 2-stage right/left rotation, height-adjustable drilling head, Construction principle Arboga - Sweden, maintenance-free gearbox with helical teeth Wheels, drill head and table are adjustable 360 degrees around the column,chip protection with electr. Switch, drilling depth indicator. This is a exhibition machine at a special price, so we are selling it without any warranty. Machine dealer with own stock of 1600 m². The data for this ad was created with ModulMWS - the software so ...

Combined cooling system Year of manufacture 2021 If you have any questions, write

Microcutter FD 112 Karl Schnell Stainless steel Dimensions: 1150x1200x1700mm Voltage: 400V / 50Hz / 3N Up to 3500kg/h Electric power: 51kW

A total of seven circular metal saws from Kaltenbach and Adige are available. 1) 4x Kaltenbach. 2) 2x Adige SC 425. 3) 1x Kaltenbach. On-site inspection is possible.

Tränklein banding machine ZW-D 500, with cardboard device, machine number 2967, year of construction 1986, machine is in good condition, immediately available If you are interested, we will also be happy to inform you about other machines in our company. Iobr Sbsvvirij Ta Ejau You are welcome to visit the machine in our house by prior appointment.

cutting diameter: 15 - 560 mm : 560 x 630 mm dimensions of saw-band: 7.400 x 54 x 1,60 mm Control: KASTO material feed - single: 900 mm multiple feeding length: max. 9.999 mm cutting length min.: 6,00 mm sawing motor: 5,50 kW cutting speed: 13 - 127 m/min height of material-table: 700 mm total power requirement: 12,00 kW weight of the machine ca.: 6,00 t dimensions of the machine ca.: 3,70 x 2,50 x H2,50 m Automatic two-column band saw with KASTO Compact Control, frequency-controlled saw band drive, chip conveyor, infeed roller-conveyor electrically driven (6m), 3x roll-conveyor 1m and outfeed roller 2m, Machine can be inspected under power. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Tränklein double corner round machine, machine is in good condition, immediately available If you are interested, we will also be happy to inform you about other machines in our company. Isbovvi Epjr Sb Ta Esau You are welcome to visit the machine in our house by prior appointment.

x-travel: 1020 mm y-travel: 520 mm z-travel: 550 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m CNC control Sinumerik 828D 24-fold automatic tool changer chip conveyor coolant through spindle device measuring feeler Technische Daten / technical details: Verfahrweg X / X-Travel 1020 mm Verfahrweg Y / Y-Travel 520 mm Verfahrweg Z / Z-Travel 550 mm Tischgröße / table size 1100x500 mm Drehzahlbereich / spindle speed 10000 UpM /rpm Anzahl der Werkzeugplätze / tool places in changer 24 fach Antriebsleistung Spindel / drive capacity spindle 9/22 kW Gewicht der Maschine ca. / weight 5500 Kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG. ...

Milling axes, dividers, grinding wheels, High: 1765 mm, Tall: 1765 mm, Weight: 2500 Kg, Width: 1100 mm, Long: 2570 mm, Ø tool: 250 mm, Total power: 7.5 kva., Ø of the grinding wheel: 250 mm, Travel of table: 400 mm, Height of points: 125 mm, Height of centers: 125 mm, Max. Ø to be sharpened: 250 mm, Power wheel motor: 3 Kv., Manufacturing number: 1905.04, Ø max to sharpen: 250 mm, Grinding wheel motor power: 3 Kv., Distance between points: 635 mm, Table tour: 400 mm, Revolutions of the wheel: 1750/2150/2850 mm, Length between points: 635 mm, Maximum length to sharpen: 400 mm, Revolutions of the grinding wheel: 1750 / 2150 / 2850 mm, Radial travel axis wheelhead: +35 / -65 mm, Maximum length to be sharpened: 400 mm, Vertical travel of the wheel: 175 mm, Vertical travel of the grinding wheel: 175 mm, Radial travel of the grinding wheel shaft: +35 / -65 mm, Cone holder shaft clamping pi ...

Kallfass tilthoist with transport belt

cutting diameter: 520 mm saw band length: 7239 mm cutting width: 1,3 mm Control: POSIMOD cutting range - square -: 520 x 520 mm feed length: 500 mm feed length: multiple: 4500 mm min. cut-off length: 6 mm length of rest piece min/max: 10 / 100 mm cutting speed: 20 - 130 m/min dimensions of saw-band: 7239 x 50 x 1,3 mm sawing motor: 5,5 kW total power requirement: 10,0 kW weight of the machine ca.: 3,8 t dimensions of machine L x W x H: 3,42 x 2,30 x 2,40 m - 2 column guided - Accessories: roller track 2500 mm length, chip conveyor, coolant The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

saw blade diameter: 360 / 425 / 460 mm cutting diameter: 10 - 140 mm stroke: mm cutting speed: 25 - 160 m/min total power requirement: 35 kW weight of the machine ca.: 4,2 t dimensions of the machine ca.: 2,8 x 1,8 x 2,2 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Combined copying milling machine - lathe MICHÄL KÄMPF

Manufacturer: FORMAT-4 Model: Kappa V60 Type of Machine : vertical panel saw Condition: Used. In operation for approx. 6 months Max cutting length: 4200 mm Max cutting height: 2200 mm Max horizontal cut height: 2080 mm Max cutting depth: 60 mm Motor power: 4 kW Saw blade diameter: 250 mm Speed: 5300 rpm Weight: 910 kg Installation dimensions (LxWxH): 5600 x 1700 x 3000 mm Find more here - / Contact us at -

Winkelschweißmaschine / Semi-Automatic Foil sealing machine Kallfass KC 8060/650

Antike Schneidmaschine - antique Guillotine Krause SM Baujahr ca. 1890-1900 - Serial-No. 198240 Very Beautiful antique Guillotine Sehr schönes antike Schneidmaschine

Antike Kniehebelprägepresse / Antique Embossing Hot Stamping Press Karl Krause KHP Baujahr / Year ca. 1930 - Serial-No. 48090 Prägefläche / Embossing Size max. 340 x 430mm Beheizung mit Gas / Heating with Gas Wunderschön verarbeitete antike Kniehebelprägepresse  Beautifully crafted antique Embossing Hot Stamping Press

Eckenrundstossmaschine / Corner Rounding machine Karl Tränklein EK manuelle Eckenrundstossmaschine, Tischmodell Manual Corner Rounding machine, tabel model Eckenrundstoßmesser mit 7mm/ Corner Rounding knife with 7mm Anlegewinkel links und rechts 45 Grad / Angle of attachment left and right 45 degrees / Die Eckenrundstossmaschine ist eine vielseitiges Maschine zum Runden oder Abschneiden von Ecken, dem Ausstanzen von Fassons, zum Lochen oder Schlitzen. The corner rounding machine is a versatile machine for rounding or trimming corners,  punching shapes, and punching or slitting.

Manufacturer: Komax Model: Kappa 230 Year of Manufacture: 2001 Type of Machine : wire processing machine Find more here - / Contact us at -

SPECIFICATION: 1 PHASE 240V/1000W Product size:Length 65mm-550mm :Width 80mm-950mm :Thickness 1mm-18mm speed control: frequency drive motor conveyor speed : 0-70 m/min product material: inner boxes/ card / carton/ label machine dimension: 3000mml x 1350mmw x 820mmh machine weight: 250kg conveyor sizes: 1500mml x 1000mmw

Refrigeration dryer KAESER TAH 6 -used----------- Technical data ----------Maximum pressure: 16 bar, Power supply: 230 Volt

Offer 25071 Specifications: - E.-Hydr. Lifting-lowering of the saw bracket - Saw blade dimensions 400 x 45 x 2.0 mm - Cutting range - 90° round approx. 250 mm - Flat approx. 250 x 130 mm - Square approx. 220 x 220 mm - Max. opening width of the vice 405 mm - Lifting speeds + cutting speeds adjustable - Mitre-adjustable vise - E.-Mot. Coolant Setup - Drive 380 V / 2.0 kW - Space requirement approx. W 550 x H 1270 x D 1700 mm - Weight approx. 380 kg

We have 2 complete controllers (built in 2006) with all cards for Cathild drying chambers. Sale is possible in a package or individually.

met 13 meter invoerrollenbaan met digitale uitlezing Dia saw / abrasive - disk : 400 mm Turningspeeds: 10/20 m/min Weight: 1250 kg

Centrifugal fan KASTRUPFabr. No. 27688/1 Year of construction approx. 1985Volume flow approx. 4000 m3/hIntake pipe 250 mmExhaust air connection 400 x 120 mmEngine speed 1440 rpmEngine power 5.5 kWNee connection 380 volts, 50 Hz.- Metal housingSpace requirement L x W x H 1100 x 900 x 1220 mmWeight approx. 150 kgGood condition; used

Screw compressor KAESER type BS 50Fabr. No. 402852 built in 1990Volume flow 5 m³/min. Pressure capacity 7.5 barEngine power main motor 30 kWNet connection 400 volts, 50 HzConnection thread 1 1/2 inches- 1107.90Operating hours read- 749.00 load hours read- SoundproofSpace requirement L x W x H 1600 x 1070 x 1350 mmWeight 900 kgvery good conditionWas a reserve compressor and has only a few operating hours; used

Reciprocating compressor KAESER type EPC 630-250Fabr. No. 1802334 year of construction 1992Volume flow at 6 bar 440 litres/min. Capacity max. 630 litres/min. Pressure capacity 10 barBoiler capacity 250 litersEngine power 3 kWNerg connection 400 Volt, 50 Hz (with 16 Amp. Plug)- 2 cylinders oil-lubricated- Pressure switch set to 10 bar- Runtime from 0 bar to 10 bar Shut-off pressure = 5 minSpace required L x W x H 750 x 700 x 1750 mmWeight approx. 150 kgGood condition; used

Hydr. Hacksaw, hacksaw, lifting saw KASTO type PSB WBS 210 / 230Masch. No. 115 106 1212 / 72783 Year of construction 1986Sawing area - Round 250 mmSawing area - Square 225 x 225 mmSawing area - Rectangle 260 x 100 mmCutting speed 11 -13 - 17 - 22 - 26 - 34 m/min. Saw blade length 400 mmMotor power 1.4 and 1.8 kW pole-switchableMains connection 380 volts, 50 Hz- only for 90 cuts, no mitre adjustment- Saw motor with 2 speeds and 3 V-belt steps- Hydraulic saw bar feed- hydraulic

Cutting capacity: round material 90°: 260mm, flat material 90°: 300mm/260mm, round material -45° to 45°: 200mm, round material 60°: 165mm, saw band dimensions X/Y/Z: 2910mm/27mm/0.9mm, cutting speed: 110m/min. Machine dimensions X/Y/Z: approx. 1500mm/1850mm/1500mm, weight: approx. 900kg, control: Kasto CompactControl, operating hours: approx. 200h. The machine control has been renewed. Documentation available. An on-site inspection is possible.